Biomedical subjects

Pasi Laakkonen

Publications and source records attributed to Pasi Laakkonen.

3 recordsLinked to original sources

PubMed2006

White LED light coupling into light guides with diffraction gratings.

Radial diffractive gratings are used to couple light of a white LED into a light guide. Theoretical coupling efficiencies are evaluated with rigorous diffraction theory in a pure conical mounting. It is shown that when the refractive index of the grating increases from 1.46 to 2.05 the incoupling efficiency increases from 42% to 63%. Also, with the increasing refractive index the incoupling efficiency is shown to become more nearly uniform over the visible spectrum. Experimental results for the incoupled efficiencies and the color coordinates of the incoupled spectra are introduced for refractive indices n=1.46 and n=1.56.

Journal Article↗

PubMed2006

Double-groove, two-depth grating coupler for light guides.

A double-groove, two-depth dielectric grating structure for high-efficiency light coupling into a light guide is introduced. We show computationally that the optimized gratings can couple a monochromatic TE- or TM-polarized light beam with nearly 100% efficiency. For an unpolarized light beam 90% efficiency can be reached. In all cases the highest achieved coupling efficiencies require that the refractive index of the grating material be greater than 1.7. The illumination and fabrication tolerances of the couplers are also analyzed.

Journal Article↗

PubMed2004

Coupling of light from an LED into a thin light guide by diffractive gratings.

Ring-shaped and radial diffractive gratings are designed with rigorous diffraction theory to couple light of a nearly monochromatic LED into a thin planar light guide on the bottom side. The theoretical coupling efficiencies for ring-shaped and radial gratings are 41% and 66%, respectively. Optimized diffractive elements are manufactured with direct electron-beam lithography and reactive-ion-etching into SiO2 substrates. Good agreement between experimental and theoretical results for selected radial gratings is reached. Furthermore, the mass production tests using injection molding are carried out with good replicability.

Journal Article↗