PubMed Health⌕ Search

Biomedical subjects

Patrick J Fleming

Publications and source records attributed to Patrick J Fleming.

11 recordsLinked to original sources
PubMed2006

Evaluation of cognitive and biochemical effects of low-level exposure to sarin in rhesus and African green monkeys.

We investigated the potential of low-level exposures to the chemical warfare nerve agent, sarin, to produce adverse effects. Rhesus (Macaca mulatta) and African green monkeys (Chlorocebus acthiops) were trained on a serial probe recognition (SPR) task before IM administration of a low-level concentration (5.87 microg/kg or 2.93 microg/kg) of sarin. Blood was sampled before agent administration and at various times following administration. Sarin administration did not disrupt performance on the SPR task in either species. Major dependent measures characterizing performance (accuracy, number of completed trials per session, average choice response time) were largely unaffected on the day sarin was administered as well as on subsequent testing sessions occurring over several weeks following administration. Analyses of red blood cell (RBC) and plasma samples revealed that sarin administration produced a substantial degree of inhibition of circulating acetylcholinesterase (AChE) in RBC fractions and butyrylcholinesterase (BChE) in plasma fractions, which only slowly recovered. In this regard, AChE activity was inhibited to a greater extent than BChE activity. Blood samples were also evaluated for regenerated sarin, which was found in RBC and plasma fractions in both species and showed orderly elimination functions. More sarin was regenerated from RBC fractions than from plasma fractions. Elimination of regenerated sarin was much slower in RBC than plasma and exceeded the expected time of AChE aging, suggesting the presence of additional sarin binding sites. In general, effects were similar in both species. Taken together, our results show that while the concentrations of sarin administered were clearly biochemically active, they were below those that are required to produce a disruption of behavioral performance.

Animals↗
PubMed2006

A backbone-based theory of protein folding.

Under physiological conditions, a protein undergoes a spontaneous disorder order transition called "folding." The protein polymer is highly flexible when unfolded but adopts its unique native, three-dimensional structure when folded. Current experimental knowledge comes primarily from thermodynamic measurements in solution or the structures of individual molecules, elucidated by either x-ray crystallography or NMR spectroscopy. From the former, we know the enthalpy, entropy, and free energy differences between the folded and unfolded forms of hundreds of proteins under a variety of solvent/cosolvent conditions. From the latter, we know the structures of approximately 35,000 proteins, which are built on scaffolds of hydrogen-bonded structural elements, alpha-helix and beta-sheet. Anfinsen showed that the amino acid sequence alone is sufficient to determine a protein's structure, but the molecular mechanism responsible for self-assembly remains an open question, probably the most fundamental open question in biochemistry. This perspective is a hybrid: partly review, partly proposal. First, we summarize key ideas regarding protein folding developed over the past half-century and culminating in the current mindset. In this view, the energetics of side-chain interactions dominate the folding process, driving the chain to self-organize under folding conditions. Next, having taken stock, we propose an alternative model that inverts the prevailing side-chain/backbone paradigm. Here, the energetics of backbone hydrogen bonds dominate the folding process, with preorganization in the unfolded state. Then, under folding conditions, the resultant fold is selected from a limited repertoire of structural possibilities, each corresponding to a distinct hydrogen-bonded arrangement of alpha-helices and/or strands of beta-sheet.

Animals↗
PubMed2006

Secondary structure determines protein topology.

Using a test set of 13 small, compact proteins, we demonstrate that a remarkably simple protocol can capture native topology from secondary structure information alone, in the absence of long-range interactions. It has been a long-standing open question whether such information is sufficient to determine a protein's fold. Indeed, even the far simpler problem of reconstructing the three-dimensional structure of a protein from its exact backbone torsion angles has remained a difficult challenge owing to the small, but cumulative, deviations from ideality in backbone planarity, which, if ignored, cause large errors in structure. As a familiar example, a small change in an elbow angle causes a large displacement at the end of your arm; the longer the arm, the larger the displacement. Here, correct secondary structure assignments (alpha-helix, beta-strand, beta-turn, polyproline II, coil) were used to constrain polypeptide backbone chains devoid of side chains, and the most stable folded conformations were determined, using Monte Carlo simulation. Just three terms were used to assess stability: molecular compaction, steric exclusion, and hydrogen bonding. For nine of the 13 proteins, this protocol restricts the main chain to a surprisingly small number of energetically favorable topologies, with the native one prominent among them.

Computer Simulation↗
PubMed2005

Building native protein conformation from highly approximate backbone torsion angles.

Reconstructing a protein in three dimensions from its backbone torsion angles is an ongoing challenge because minor inaccuracies in these angles produce major errors in the structure. As a familiar example, a small change in an elbow angle causes a large displacement at the end of your arm, the longer the arm, the larger the displacement. Even accurate knowledge of the backbone torsions and Psi is insufficient, owing to the small, but cumulative, deviations from ideality in backbone planarity, which, if ignored, also lead to major errors in the structure. Against this background, we conducted a computational experiment to assess whether protein conformation can be determined from highly approximate backbone torsion angles, the kind of information that is now obtained readily from NMR. Specifically, backbone torsion angles were taken from proteins of known structure and mapped into 60 degrees x 60 degrees grid squares, called mesostates. Side-chain atoms beyond the beta -carbon were discarded. A mesostate representation of the protein backbone was then used to extract likely candidates from a fragment library of mesostate pentamers, followed by Monte Carlo-based fragment-assembly simulations to identify stable conformations compatible with the given mesostate sequence. Only three simple energy terms were used to gauge stability: molecular compaction, soft-sphere repulsion, and hydrogen bonding. For the six representative proteins described here, stable conformers can be partitioned into a remarkably small number of topologically distinct clusters. Among these, the native topology is found with high frequency and can be identified as the cluster with the most favorable energy.

Hydrogen Bonding↗
PubMed2005

Do all backbone polar groups in proteins form hydrogen bonds?

Evidence from proteins and peptides supports the conclusion that intrapeptide hydrogen bonds stabilize the folded form of proteins. Paradoxically, evidence from small molecules supports the opposite conclusion, that intrapeptide hydrogen bonds are less favorable than peptide-water hydrogen bonds. A related issue-often lost in this debate about comparing peptide-peptide to peptide- water hydrogen bonds-involves the energetic cost of an unsatisfied hydrogen bond. Here, experiment and theory agree that breaking a hydrogen bond costs between 5 and 6 kcal/mol. Accordingly, the likelihood of finding an unsatisfied hydrogen bond in a protein is insignificant. This realization establishes a powerful rule for evaluating protein conformations.

Hydrogen Bonding↗
PubMed2005

The Protein Coil Library: a structural database of nonhelix, nonstrand fragments derived from the PDB.

Approximately half the structure of folded proteins is either alpha-helix or beta-strand. We have developed a convenient repository of all remaining structure after these two regular secondary structure elements are removed. The Protein Coil Library (http://roselab.jhu.edu/coil/) allows rapid and comprehensive access to non-alpha-helix and non-beta-strand fragments contained in the Protein Data Bank (PDB). The library contains both sequence and structure information together with calculated torsion angles for both the backbone and side chains. Several search options are implemented, including a query function that uses output from popular PDB-culling servers directly. Additionally, several popular searches are stored and updated for immediate access. The library is a useful tool for exploring conformational propensities, turn motifs, and a recent model of the unfolded state.

Algorithms↗
PubMed2005

Are proteins made from a limited parts list?

Understanding the process of protein folding has been recognized as an important challenge for >70 years. It is, quintessentially, a thermodynamic problem and, arguably, thermodynamics is our most powerful discipline for understanding biological systems. Yet, despite all this, we still lack predictive understanding of protein folding. Is something missing from this picture?

Algorithms↗
PubMed2005

Hydrogen-bonded turns in proteins: the case for a recount.

Beta-turns are sites at which proteins change their overall chain direction, and they occur with high frequency in globular proteins. The Protein Data Bank has many instances of conformations that resemble beta-turns but lack the characteristic N-H(i) --> O=C(i - 3) hydrogen bond of an authentic beta-turn. Here, we identify potential hydrogen-bonded beta-turns in the coil library, a Web-accessible database utility comprised of all residues not in repetitive secondary structure, neither alpha-helix nor beta-sheet (http://www.roselab.jhu.edu/coil). In particular, candidate turns were identified as four-residue segments satisfying highly relaxed geometric criteria but lacking a strictly defined hydrogen bond. Such candidates were then subjected to a minimization protocol to determine whether slight changes in torsion angles are sufficient to shift the conformation into reference-quality geometry without deviating significantly from the original structure. This approach of applying constrained minimization to known structures reveals a substantial population of previously unidentified, stringently defined, hydrogen-bonded beta-turns. In particular, 33% of coil library residues were classified as beta-turns prior to minimization. After minimization, 45% of such residues could be classified as beta-turns, with another 8% in 3(10) helixes (which closely resemble type III beta-turns). Of the remaining coil library residues, 37% have backbone dihedral angles in left-handed polyproline II structure.

Hydrogen Bonding↗
PubMed2004

A novel method reveals that solvent water favors polyproline II over beta-strand conformation in peptides and unfolded proteins: conditional hydrophobic accessible surface area (CHASA).

In aqueous solution, the ensemble of conformations sampled by peptides and unfolded proteins is largely determined by their interaction with water. It has been a long-standing goal to capture these solute-water energetics accurately and efficiently in calculations. Historically, accessible surface area (ASA) has been used to estimate these energies, but this method breaks down when applied to amphipathic peptides and proteins. Here we introduce a novel method in which hydrophobic ASA is determined after first positioning water oxygens in hydrogen-bonded orientations proximate to all accessible peptide/protein backbone N and O atoms. This conditional hydrophobic accessible surface area is termed CHASA. The CHASA method was validated by predicting the polyproline-II (P(II)) and beta-strand conformational preferences of non-proline residues in the coil library (i.e., non-alpha-helix, non-beta-strand, non-beta-turn library derived from X-ray elucidated structures). Further, the method successfully rationalizes the previously unexplained solvation energies in polyalanyl peptides and compares favorably with published experimentally determined P(II) residue propensities. We dedicate this paper to Frederic M. Richards.

Hydrogen Bonding↗
PubMed2004

Polyproline II helix is the preferred conformation for unfolded polyalanine in water.

Does aqueous solvent discriminate among peptide conformers? To address this question, we computed the solvation free energy of a blocked, 12-residue polyalanyl-peptide in explicit water and analyzed its solvent structure. The peptide was modeled in each of 4 conformers: alpha-helix, antiparallel beta-strand, parallel beta-strand, and polyproline II helix (P(II)). Monte Carlo simulations in the canonical ensemble were performed at 300 K using the CHARMM 22 forcefield with TIP3P water. The simulations indicate that the solvation free energy of P(II) is favored over that of other conformers for reasons that defy conventional explanation. Specifically, in these 4 conformers, an almost perfect correlation is found between a residue's solvent-accessible surface area and the volume of its first solvent shell, but neither quantity is correlated with the observed differences in solvation free energy. Instead, solvation free energy tracks with the interaction energy between the peptide and its first-shell water. An additional, previously unrecognized contribution involves the conformation-dependent perturbation of first-shell solvent organization. Unlike P(II), beta-strands induce formation of entropically disfavored peptide:water bridges that order vicinal water in a manner reminiscent of the hydrophobic effect. The use of explicit water allows us to capture and characterize these dynamic water bridges that form and dissolve during our simulations.

Computer Simulation↗