PubMed Health⌕ Search

Biomedical subjects

Paul J Chirik

Publications and source records attributed to Paul J Chirik.

17 recordsLinked to original sources
PubMed2006

Bis(imino)pyridine ligand deprotonation promoted by a transient iron amide.

Addition of 2 equiv of LiNMe(2) to the bis(imino)pyridine ferrous dichloride, ((i)(Pr)PDI)FeCl(2) ((i)(Pr)PDI = (2,6-(i)()Pr(2)-C(6)H(3)N=CMe)(2)C(5)H(3)N), resulted in deprotonation of the chelate methyl groups, yielding the bis(enamide)pyridine iron dimethylamine adduct, ((i)(Pr)PDEA)Fe(NHMe(2)) ((i)(Pr)PDEA = (2,6-(i)Pr(2)-C(6)H(3)NC=CH(2))(2)C(5)H(3)N). Performing a similar procedure with KN(SiMe(3))(2) in THF solution afforded the corresponding bis(THF) adduct, ((i)(Pr)PDEA)Fe(THF)(2). ((i)(Pr)PDEA)Fe(NHMe(2)) has also been prepared by addition of the free amine to the iron dialkyl complex, ((i)(Pr)PDI)Fe(CH(2)SiMe(3))(2), implicating formation of a transient iron amide that is sufficiently basic to deprotonate the bis(imino)pyridine methyl groups. Deprotonation of the amine ligand in ((i)(Pr)PDEA)Fe(NHMe(2)) has been accomplished by addition of amide bases to afford the ferrous amide-ate complexes, [((i)(Pr)PDEA)Fe(mu-NMe(2))M] (M = Li, K).

Journal Article↗
PubMed2005

Kinetics and mechanism of N2 hydrogenation in bis(cyclopentadienyl) zirconium complexes and dinitrogen functionalization by 1,2-addition of a saturated C-H bond.

The rates of hydrogenation of the N2 ligand in the side-on bound dinitrogen compounds, [(eta(5)-C5Me4H)2Zr]2(mu2,eta(2),eta(2)-N2) and [(eta(5)-C5Me5)(eta(5)-C5H2-1,2-Me2-4-R)Zr]2(mu2,eta(2),eta(2)-N2) (R = Me, Ph), to afford the corresponding hydrido zirconocene diazenido complexes have been measured by electronic spectroscopy. Determination of the rate law for the hydrogenation of [(eta(5)-C5Me5)(eta(5)-C5H2-1,2,4-Me3)Zr]2(mu2,eta(2),eta(2)-N2) establishes an overall second-order reaction, first order with respect to each reagent. These data, in combination with a normal, primary kinetic isotope effect of 2.2(1) for H2 versus D2 addition, establish the first H2 addition as the rate-determining step in N2 hydrogenation. Kinetic isotope effects of similar direction and magnitude have also been measured for hydrogenation (deuteration) of the two other zirconocene dinitrogen complexes. Measuring the rate constants for the hydrogenation of [(eta(5)-C5Me5)(eta(5)-C5H2-1,2,4-Me3)Zr]2(mu2,eta(2),eta(2)-N2) over a 40 degrees C temperature range provided activation parameters of deltaH(double dagger) = 8.4(8) kcal/mol and deltaS(double dagger) = -33(4) eu. The entropy of activation is consistent with an ordered four-centered transition structure, where H2 undergoes formal 1,2-addition to a zirconium-nitrogen bond with considerable multiple bond character. Support for this hypothesis stems from the observation of N2 functionalization by C-H activation of a cyclopentadienyl methyl substituent in the mixed ring dinitrogen complexes, [(eta(5)-C5Me5)(eta(5)-C5H2-1,2-Me2-4-R)Zr]2(mu2,eta(2),eta(2)-N2) (R = Me, Ph), to afford cyclometalated zirconocene diazenido derivatives.

Crystallography, X-Ray↗
PubMed2005

Ligand-induced haptotropic rearrangements in bis(indenyl)zirconium sandwich complexes.

Addition of principally sigma-donating ligands such as THF, chelating diethers, or 1,2-bis(dimethyl)phosphinoethane to eta(9),eta(5)-bis(indenyl)zirconium sandwich complexes, (eta(9)-C(9)H(5)-1,3-R(2))(eta(5)-C(9)H(5)-1,3-R(2))Zr (R = alkyl or silyl), induces haptotropic rearrangement to afford (eta(6)-C(9)H(5)-1,3-R(2))(eta(5)-C(9)H(5)-1,3-R(2))ZrL adducts. Examples where L = THF and DME have been characterized by X-ray diffraction and revealed significant buckling of the eta(6) benzo ring, consistent with reduction of the arene, and highlight the importance of the zirconium(IV) canonical form. For the THF-induced haptotropic rearrangements, the thermodynamic driving force for ring migration has been measured as a function of indenyl substituent and demonstrates silylated sandwiches favor THF coordination and the eta(6),eta(5) bonding motif over their alkylated counterparts. In the case of chelating diethers, measurement of the corresponding equilibrium constants establish more stable eta(6),eta(5) adducts with five- over four-membered chelates and with smaller oxygen and carbon backbone substituents. Kinetic studies on both THF and DME addition to (eta(9)-C(9)H(5)-1,3-(SiMe(3))(2))(eta(5)-C(9)H(5)-1,3-(SiMe(3))(2))Zr established a first-order dependence on the incoming ligand, consistent with a mechanism involving direct attack of the incoming nucleophile on the eta(9),eta(5) sandwich. These results further highlight the ability of the indenyl ligand to smoothly adjust hapticity to meet the electronic requirements of the metal center.

Journal Article↗
PubMed2005

Bis(imino)pyridine iron(II) alkyl cations for olefin polymerization.

Treatment of the five-coordinate ferrous dialkyl complex, (iPrPDI)Fe(CH2SiMe3)2 (iPrPDI = ((2,6-CHMe2)2C6H3N=CMe)2C5H3N), with [PhMe2NH][BPh4] in the presence of diethyl ether or tetrahydrofuran furnished the corresponding alkyl cations, where the donor ligand is coordinated in the basal plane of a distorted square pyramidal iron(II) alkyl cation. Performing the same reaction with the neutral Lewis acid, B(C6F5)3, induced methide abstraction from a silicon atom followed by rearrangement to afford the base free ferrous alkyl cation, [(iPrPDI)Fe(CH2SiMe2CH2SiMe3)][MeB(C6F5)3]. This complex is active for the polymerization of ethylene and yields polymers that are of higher molecular weight and narrower polydispersity than traditional methylalumoxane-activated catalysts.

Journal Article↗
PubMed2005

Dinitrogen functionalization with terminal alkynes, amines, and hydrazines promoted by [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2): observation of side-on and end-on diazenido complexes in the reduction of N2 to hydrazine.

Functionalization of the N2 ligand in the side-on bound dinitrogen complex, [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2), has been accomplished by addition of terminal alkynes to furnish acetylide zirconocene diazenido complexes, [(eta5-C5Me4H)2Zr(C[triple bond]CR)]2(mu2,eta2,eta2-N2H2) (R = nBu, tBu, Ph). Characterization of [(eta5-C5Me4H)2Zr(C[triple bond]CCMe3)]2(mu2,eta2,eta2-N2H2) by X-ray diffraction revealed a side-on bound diazenido ligand in the solid state, while variable-temperature 1H and 15N NMR studies established rapid interconversion between eta1,eta1 and eta2,eta2 hapticity of the [N2H2]2- ligand in solution. Synthesis of alkyl, halide, and triflato zirconocene diazenido complexes, [(eta5-C5Me4H)2ZrX]2(mu2,eta1,eta1-N2H2) (X = Cl, I, OTf, CH2Ph, CH2SiMe3), afforded eta1,eta1 coordination of the [N2H2]2- fragment both in the solid state and in solution, demonstrating that sterically demanding, in some cases pi-donating, ligands can overcome the electronically preferred side-on bonding mode. Unlike [(eta5-C5Me4H)2ZrH]2(mu2,eta2,eta2-N2H2), the acetylide and alkyl zirconocene diazenido complexes are thermally robust, resisting alpha-migration and N2 cleavage up to temperatures of 115 degrees C. Dinitrogen functionalization with [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) was also accomplished by addition of proton donors. Weak Brønsted acids such as water and ethanol yield hydrazine and (eta5-C5Me4H)2Zr(OH)2 and (eta5-C5Me4H)2Zr(OEt)2, respectively. Treatment of [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) with HNMe2 or H2NNMe2 furnished amido or hydrazido zirconocene diazenido complexes that ultimately produce hydrazine upon protonation with ethanol. These results contrast previous observations with [(eta5-C5Me5)2Zr(eta1-N2)]2(mu2,eta1,eta1-N2) where loss of free dinitrogen is observed upon treatment with weak acids. These studies highlight the importance of cyclopentadienyl substituents on transformations involving coordinated dinitrogen.

Journal Article↗
PubMed2005

Square planar vs tetrahedral geometry in four coordinate iron(II) complexes.

The geometric preferences of a family of four coordinate, iron(II) d6 complexes of the general form L2FeX2 have been systematically evaluated. Treatment of Fe2(Mes)4 (Mes = 2,4,6-Me3C6H2) with monodentate phosphine and phosphite ligands furnished square planar trans-P2Fe(Mes)2 derivatives. Identification of the geometry has been accomplished by a combination of solution and solid-state magnetometry and, in two cases (P = PMe3, PEt2Ph), X-ray diffraction. In contrast, both tetrahedral and square planar coordination has been observed upon complexation of chelating phosphine ligands. A combination of crystallographic and magnetic susceptibility data for (depe)Fe(Mes)2 (depe = 1,2-bis(diethylphosphino)ethane) established a tetrahedral molecular geometry whereas SQUID magnetometry and Mössbauer spectroscopy on samples of (dppe)Fe(Mes)2 (dppe = 1,2-bis(diphenylphosphino)ethane) indicated a planar molecule. When dissolved in chlorinated solvents, the latter compound promotes chlorine atom abstraction, forming tetrahedral (dppe)Fe(Mes)Cl and (dppe)FeCl2. Ligand substitution reactions have been studied for both structural types and are rapid on the NMR time scale at ambient temperature.

Journal Article↗
PubMed2004

Zirconium sandwich complexes with eta(9) indenyl ligands: well-defined precursors for zirconocene-mediated coupling reactions.

A family of isolable, well-defined bis-indenyl zirconium sandwich complexes, (eta(5)-C(9)H(5)-1,3-R(2))(eta(9)-C(9)H(5)-1,3-R(2))Zr (R = silyl, alkyl), have been prepared by either alkane reductive elimination or alkali metal reduction of a suitable zirconium(IV) dihalide precursor. Crystallographic characterization of two of these derivatives, R = SiMe(2)CMe(3) and CHMe(2), reveals unprecedented eta(9) coordination of one of the indenyl ligands. Variable-temperature and EXSY NMR studies establish that the eta(5) and eta(9) rings are rapidly interconverting in solution. The sandwich complexes serve as effective sources of low-valent zirconium reacting rapidly with both olefins and alkynes at ambient temperature. In contrast to bis-cyclopentadienyl chemistry, the olefin adducts of the bis-indenyl zirconium sandwiches undergo preferential C-H activation to yield the corresponding allyl hydride compounds, although reaction with excess olefin proceeds through the eta(2)-olefin adduct, forming the corresponding zirconacyclopentane.

Journal Article↗
PubMed2004

Dinitrogen activation by titanium sandwich complexes.

The activation of dinitrogen by titanium sandwich complexes of the general form (eta5-C5Me4R)2Ti (R = CHMe2, CMe3, SiMe3) has been systematically investigated. Low-temperature, in situ, solution infrared spectroscopy has allowed detection of monomeric bis-dinitrogen complexes of titanium that are isostructural with more familiar dicarbonyl derivatives. One example, (eta5-C5Me4CHMe2)2Ti(N2)2, has also been characterized by X-ray diffraction and reveals weakly activated dinitrogen ligands. From the solution IR data, the relative azophilicity of the titanium sandwich complexes has been established and increases with smaller cyclopentadienyl substituents.

Journal Article↗
PubMed2004

On the origin of dinitrogen hydrogenation promoted by [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2).

The origin of the hydrogenation of the dinitrogen ligand in [(eta5-C5Me4H)2Zr]2(mu2,eta2,eta2-N2) has been investigated by a combined computational and experimental study. Density functional theory calculations on the zirconocene dinitrogen complex demonstrate significant imido character in the zirconium nitrogen bonds, arising from effective pi-back-bonding from the low-valent zirconium and the side-on bound N2 ligand. The twisted ground-state structure of the N2 complex is a key requirement for nitrogen hydrogenation, as calculations on the model complex [(eta5-C5H5)2Zr]2(mu2,eta2,eta2-N2) reveal reduced overlap as the dihedral angle between the zirconocene wedges approaches 0 degrees . Experimentally, isotopic labeling studies on the microscopic reverse are consistent with a 1,2-addition mechanism for nitrogen hydrogenation.

Journal Article↗
PubMed2004

Preparation and molecular and electronic structures of iron(0) dinitrogen and silane complexes and their application to catalytic hydrogenation and hydrosilation.

Reduction of the five-coordinate iron(II) dihalide complexes (iPrPDI)FeX2 (iPrPDI = ((2,6-CHMe2)2C6H3N=CMe)2C5H3N; X = Cl, Br) with sodium amalgam under 1 atm of dinitrogen afforded the square pyramidal, high spin iron(0) bis(dinitrogen) complex (iPrPDI)Fe(N2)2. In solution, (iPrPDI)Fe(N2)2 loses 1 equiv of N2 to afford the mono(dinitrogen) adduct (iPrPDI)Fe(N2). Both dinitrogen compounds serve as effective precatalysts for the hydrogenation and hydrosilation of olefins and alkynes. Effecient catalytic reactions are observed with low catalyst loadings (< or = 0.3 mol %) at ambient temperature in nonpolar media. The catalytic hydrosilations are selective in forming the anti-Markovnikov product. Structural characterization of a high spin iron(0) alkyne and a bis(silane) sigma-complex has also been accomplished and in combination with isotopic labeling studies provides insight into the mechanism of both catalytic C-H and catalytic C-Si bond formation.

Catalysis↗
PubMed2004

Hydrogenation and cleavage of dinitrogen to ammonia with a zirconium complex.

Molecular nitrogen is relatively inert owing to the strength of its triple bond, nonpolarity and high ionization potential. As a result, the fixation of atmospheric nitrogen to ammonia under mild conditions has remained a challenge to chemists for more than a century. Although the Haber-Bosch process produces over 100 million tons of ammonia annually for the chemical industry and agriculture, it requires high temperature and pressure, in addition to a catalyst, to induce the combination of hydrogen (H2) and nitrogen (N2). Coordination of molecular nitrogen to transition metal complexes can activate and even rupture the strong N-N bond under mild conditions, with protonation yielding ammonia in stoichiometric and even catalytic yields. But the assembly of N-H bonds directly from H2 and N2 remains challenging: adding H2 to a metal-N2 complex results in the formation of N2 and metal-hydrogen bonds or, in the case of one zirconium complex, in formation of one N-H bond and a bridging hydride. Here we extend our work on zirconium complexes containing cyclopentadienyl ligands and show that adjustment of the ligands allows direct observation of N-H bond formation from N2 and H2. Subsequent warming of the complex cleaves the N-N bond at 45 degrees C, and continued hydrogenation at 85 degrees C results in complete fixation to ammonia.

Ammonia↗
PubMed2003

Synthesis of a zirconium sandwich complex and crystallographic characterization of its adduct with tetrahydrofuran.

Reductive elimination of alkane from a silylated bis-indenyl zirconium isobutyl hydride affords a zirconium sandwich complex with an unusual eta6 indenyl ligand. Crystallographic characterization of its adduct with tetrahydrofuran has been achieved and reveals significant localization in the six-membered ring. Complexation of more potent ligands such as carbon monoxide and diphenylacetylene are effective in promoting haptotropic rearrangement of the eta6 indenyl ligand and provides familiar bent zirconocene derivatives. The zirconium sandwich compound also undergoes oxidative addition of carbon-hydrogen bonds of pyridyl ligands, resulting in a crystallographically characterized dimethylamino pyridyl hydride complex of zirconium.

Journal Article↗
PubMed2003

Cyclopentadienyl substituent effects on reductive elimination reactions in group 4 metallocenes: kinetics, mechanism, and application to dinitrogen activation.

The rate of reductive elimination for a family of zirconocene isobutyl hydride complexes, Cp(CpR(n)())Zr(CH(2)CHMe(2))H (Cp = eta(5)-C(5)Me(5), CpR(n)() = substituted cyclopentadienyl), has been measured as a function of cyclopentadienyl substituent. In general, the rate of reductive elimination increases modestly with the incorporation of sterically demanding substituents such as [CMe(3)] or [SiMe(3)]. A series of isotopic labeling experiments was used to elucidate the mechanism and rate-determining step for the reductive elimination process. From these studies, a new zirconocene isobutyl hydride complex, Cp' '(2)Zr(CH(2)CHMe(2))(H) (Cp' ' = eta(5)-C(5)H(3)-1,3-(SiMe(3))(2)), was designed and synthesized such that facile reductive elimination of isobutane and activation of dinitrogen was observed. The resulting dinitrogen complex, [Cp' '(2)Zr](2)(mu(2), eta(2),eta(2)-N(2)), has been characterized by X-ray diffraction and displays a bond length of 1.47 A for the N(2) ligand, the longest observed in any metallocene dinitrogen complex. Solution magnetic susceptibility demonstrates that [Cp' '(2)Zr](2)(mu(2), eta(2), eta(2)-N(2)) is a ground-state triplet, consistent with two Zr(III), d(1) centers. Mechanistic studies reveal that the dinitrogen complex is derived from the reaction of N(2) with the resulting cyclometalated zirconocene hydride rather than directly from reductive elimination of alkane.

Journal Article↗
PubMed2003

Selective, catalytic carbon-carbon bond activation and functionalization promoted by late transition metal catalysts.

The selective catalytic activation and functionalization of carbon-carbon bonds in a series of substituted cyclopropane substrates has been developed using commercially available transition metal catalysts. Catalytic hydrogenation and olefination procedures, tolerant of a range of functional groups, have been discovered. Introduction of a chelate-assisting substituent such as [PPh2] is effective in altering the kinetic selectivity and lowering the activation barrier for the catalytic processes.

Journal Article↗