PubMed Health⌕ Search

Biomedical subjects

Paul J Dyson

Publications and source records attributed to Paul J Dyson.

At least 19 recordsLinked to original sources
PubMed2007

Application of density functional theory and vibrational spectroscopy toward the rational design of ionic liquids.

Density functional theory methods in combination with vibrational spectroscopy are used to investigate possible variants of molecular structure of the ion pairs of several imidazolium-based ionic liquids (ILs). Multiple stable structures are determined with the anion positioned (a) near to the C2 atom of the imidazolium ring, (b) between N1 and C5, (c) between N3 and C4, and (d) between C4 and C5. Chloride and bromide anions in vacuum also occupy positions above or below the imidazolium ring, but in the condensed state these positions are destabilized. In comparison with the halides that almost equally occupy the positions (a-d), tetrafluoroborate and hexafluorophosphate anions strongly prefer position (a). The position and the type of the anion influence the conformation of the side chains bound to the imidazolium N1 atom, which are able to adopt in vacuum all usual staggered or eclipsed conformations, although in the liquid state some of the conformations are present only as minor forms if at all. Vibrations of the cations depend both on the conformational changes and on the association with the anion. The formation of the ion pairs influences mainly stretching and out-of-plane vibrations of the imidazolium C-H groups and stretching vibrations of the perfluoroanions. Other modes of the ions retain their individuality and practically do not mix. This allows "interionic" vibrations to be separated and to regard the couple of the ions as an anharmonic oscillator. Such a model correlates the molecular structure of various ILs and their melting points without involving the energy of the interaction between the cations and anions but explains structure-melting point correlations on the grounds of quasy-elastic properties.

Journal Article↗
PubMed2006

A supercooled imidazolium iodide ionic liquid as a low-viscosity electrolyte for dye-sensitized solar cells.

A series of allyl-functionalized imidazolium salts are reported, including 1-allyl-3-ethylimidazolium iodide and 1-allyl-3-propylimidazolium iodide, which have melting points close to room temperature and show typical properties of supercooled fluids if heated above their melting points. Their viscosities in the liquid state are considerably lower than the benchmark ionic liquid used in solar cells, viz., 1-propyl-3-methylimidazolium iodide. Electrolytes containing these new liquids provide excellent efficiencies and good stability in dye-sensitized solar cells when subjected to an accelerated-light soaking test at 60 degrees C. The structures of three of the new salts have been established in the solid state by single-crystal X-ray analysis.

Journal Article↗
PubMed2006

Development of organometallic ruthenium-arene anticancer drugs that resist hydrolysis.

With a view to develop drugs that could resist hydrolysis in aqueous media, organometallic arene-capped ruthenium(II) 1,3,5-triaza-7-phosphatricyclo[3.3.1.1]decane (RAPTA) complexes bearing chelating carboxylate ligands have been prepared and studied. The new complexes, Ru(eta6-cymene)(PTA)(C2O4) (1) and Ru(eta6-cymene)(PTA)(C6H6O4) (2), were found to be highly soluble and kinetically more stable than their RAPTA precursor that contains two chloride ligands in place of the carboxylate ligands. They were also able to resist hydrolysis in water and exhibited significantly lower pKa values. Importantly, they showed a similar order of activity in inhibiting cancer cell-growth proliferation (as determined by in vitro assays) and exhibited oligonucleotide binding characteristics (as evidenced by matrix-assisted laser desorption ionization mass spectrometry) similar to those of the RAPTA precursor, hence realizing a strategy for developing a new generation of stable and highly water-soluble RAPTA adducts.

Antineoplastic Agents↗
PubMed2006

Why are ionic liquids liquid? A simple explanation based on lattice and solvation energies.

We have developed a simple and quantitative explanation for the relatively low melting temperatures of ionic liquids (ILs). The basic concept was to assess the Gibbs free energy of fusion (Delta(fus)G) for the process IL(s) --> IL(l), which relates to the melting point of the IL. This was done using a suitable Born-Fajans-Haber cycle that was closed by the lattice (i.e., IL(s) --> IL(g)) Gibbs energy and the solvation (i.e., IL(g) --> IL(l)) Gibbs energies of the constituent ions in the molten salt. As part of this project we synthesized and determined accurate melting points (by DSC) and dielectric constants (by dielectric spectroscopy) for 14 ionic liquids based on four common anions and nine common cations. Lattice free energies (Delta(latt)G) were estimated using a combination of Volume Based Thermodynamics (VBT) and quantum chemical calculations. Free energies of solvation (Delta(solv)G) of each ion in the bulk molten salt were calculated using the COSMO solvation model and the experimental dielectric constants. Under standard ambient conditions (298.15 K and 10(5) Pa) Delta(fus)G degrees was found to be negative for all the ILs studied, as expected for liquid samples. Thus, these ILs are liquid under standard ambient conditions because the liquid state is thermodynamically favorable, due to the large size and conformational flexibility of the ions involved, which leads to small lattice enthalpies and large entropy changes that favor melting. This model can be used to predict the melting temperatures and dielectric constants of ILs with good accuracy. A comparison of the predicted vs experimental melting points for nine of the ILs (excluding those where no melting transition was observed and two outliers that were not well described by the model) gave a standard error of the estimate (s(est)) of 8 degrees C. A similar comparison for dielectric constant predictions gave s(est) as 2.5 units. Thus, from very little experimental and computational data it is possible to predict fundamental properties such as melting points and dielectric constants of ionic liquids.

Journal Article↗
PubMed2006

Synthesis, characterization, and in vitro evaluation of novel ruthenium(II) eta6-arene imidazole complexes.

Ten complexes of general formula [Ru(eta6-arene)Cl2(L)], [Ru(eta6-arene)Cl(L)2][X], and [Ru(eta6-arene)(L)3][X]2 (eta6-arene = benzene, p-cymene; L = imidazole, benzimidazole, N-methylimidazole, N-butylimidazole, N-vinylimidazole, N-benzoylimidazole; X = Cl, BF4, BPh4) have been prepared and characterized by spectroscopy. The structures of five representative compounds have been established in the solid state by single-crystal X-ray diffraction. All the new compounds were assessed by the same in vitro screening assays applied to [imidazole-H][trans-RuCl4(DMSO)(imidazole)] (NAMI-A) and [Ru(eta6-arene)Cl2(1,3,5-triaza-7-phosphaadamantane)] (RAPTA) compounds. It was found that the new compounds show essentially the same order of cytotoxicity as the RAPTA compounds toward cancer cells. Several of the compounds were selective toward cancer cells in that they were less (or not) cytotoxic toward nontumorigenic cells that are used to model healthy human cells. Thus, two of the compounds, [Ru(eta6-p-cymene)Cl(vinylimid)2][Cl] (vinylimid = N-vinylimidazole) and [Ru(eta6-benzene)(mimid)3][BF4]2 (mimid = N-methylimidazole), have been selected for a more detailed in vivo evaluation.

Animals↗
PubMed2006

Biphasic hydrosilylation in ionic liquids: a process set for industrial implementation.

The biphasic hydrosilylation of 1-hexadecene with siloxane B9800 in a range of ionic liquids is reported. Of the ionic liquids tested, [C(4)py][BF(4)] and [C(4)-3-pic][BF(4)] offer the optimum compromise between activity and catalyst retention. Several platinum precatalysts were screened, of which K(2)PtCl(4) and Pt(PPh(3))(4) were found to give the best performance; the former provides the highest activity, while the latter offers higher stability and recyclability, and depending on the conditions, both can afford either homogeneous or soluble nanoparticle catalysts as the active species. A number of reaction parameters were varied, and the effects of oxygen, water, and chloride impurities on the reaction were studied. In addition, since nanoparticle catalysts were observed, various strategies to stabilize nanoparticles were screened, but none of them resulted in a superior catalytic system.

Journal Article↗
PubMed2006

One-step conversion of cellobiose to C6-alcohols using a ruthenium nanocluster catalyst.

The one-step conversion of cellulose to C6-alcohols via green and energy efficient approaches has, as far as we are aware, not been reported. Such a process presents a considerable challenge, the two key problems being (1) finding a suitable solvent that dissolves the cellulose, and (2) the development of advanced catalytic chemistry for selective cleavage of the C-O-C bonds (glycosidic bonds) connecting glucose residues. The dissolution of cellulose has been recently realized by using ionic liquids as green solvents; there is still no efficient method, such as selective hydrogenation, for the precise C-O-C cleavage under mild conditions, however. Cellobiose is a glucose dimer connected by a glycosidic bond and represents the simplest model molecule for cellulose. We disclose in this communication that the one-step conversion of cellobiose to C6-alcohols can be realized by selectively breaking the C-O-C bonds via selective hydrogenation using a water-soluble ruthenium nanocluster catalyst under 40 bar H2 pressure.

Alcohols↗
PubMed2006

Dielectric response of imidazolium-based room-temperature ionic liquids.

We have used microwave dielectric relaxation spectroscopy to study the picosecond dynamics of five low-viscosity, highly conductive room temperature ionic liquids based on 1-alkyl-3-methylimidazolium cations paired with the bis((trifluoromethyl)sulfonyl)imide anion. Up to 20 GHz the dielectric response is bimodal. The longest relaxation component at the time scale of several 100 ps reveals strongly nonexponential dynamics and correlates with the viscosity in a manner consistent with hydrodynamic predictions for the diffusive reorientation of dipolar ions. Methyl substitution at the C2 position destroys this correlation. The time constants of the weak second process at the 20 ps time scale are practically the same for each salt. This intermediate process seems to correlate with similar modes in optical Kerr effect spectra, but its physical origin is unclear. The missing high-frequency portion of the spectra indicates relaxation beyond the upper cutoff frequency of 20 GHz, presumably due to subpicosecond translational and librational displacements of ions in the cage of their counterions. There is no evidence for orientational relaxation of long-lived ion pairs.

Journal Article↗
PubMed2006

Ionic solid-state dimers and polymers derived from imidazolium dicarboxylic acids.

A series of imidazolium dicarboxylic acids have been prepared from the reaction of the 1,3-bis(carboxymethyl)imidazolium zwitterion with the Brønsted acids HX (X = F, Br, Cl, ClO4). The structures of these acids have been established in the solid state by single-crystal X-ray diffraction, which revealed that the cations and anions form strong hydrogen bonds through O-H...X interactions, leading to the formation of dimeric and polymeric networks. These acids react with elemental zinc and cobalt to form stable polymeric coordination complexes, some of which have also been characterised by X-ray diffraction.

Journal Article↗
PubMed2006

Metal-based antitumour drugs in the post genomic era.

The discovery of new metal-based antitumour drugs, whether cisplatin derivatives or those based on other metals, has been largely based on cell viability assays (IC50 values) and compounds that bind to DNA. This approach has been applied for more than 30 years during which time very few new drugs have entered clinical use. In this article we discuss what the future holds for metal-based drugs, in particular anti-metastasis drugs, in these enlightened times of the post genomic era.

Animals↗
PubMed2006

From dysfunction to bis-function: on the design and applications of functionalised ionic liquids.

Some of the recent developments concerning the synthesis, properties and applications of functionalised ionic liquids are highlighted. Various strategies are presented, including functionalisation of the cation, anion or both cation and anion in the same ionic liquid, leading to what has been termed dual-functionalised ionic liquids. Particular attention is given to the application of functionalised ionic liquids as reaction media, to stabilise nanoparticles/modify surfaces and to generate porous materials.

Journal Article↗
PubMed2006

Influence of ionic liquids bearing functional groups in dye-sensitized solar cells.

Ionic liquids containing the nitrile and vinyl functional groups attached to imidazolium cations combined with various anions, e.g., iodide, bis[(trifluoromethyl)sulfonyl]imide ([TFSI]-), or dicyanamide ([N(CN)2]-), have been prepared and characterized. These ionic liquids have been successfully used as electrolytes for dye-sensitized solar cells based on nanocrystalline TiO2 with the amphiphilic ruthenium sensitizer [ruthenium (4,4'-dicarboxylic acid-2,2'-bipyridine)(4,4'-bis(p-hexyloxystyryl)-2,2'-bipyridine)][NCS]2 (coded K-19). The iodide salt was used in 3-methoxypropionitrile-based electrolytes, and the performances of both types of devices were evaluated on the basis of their photocurrent density-voltage characteristics and dark current measurements, demonstrating that the functional groups do not exert a detrimental effect on the performance. The solid-state structure of the nitrile-functionalized salt [C1C3CN(im)]I has also been established by single-crystal X-ray diffraction, revealing extensive hydrogen bonding between the cation protons and the iodide.

Journal Article↗
PubMed2006

The role of cisplatin and NAMI-A plasma-protein interactions in relation to combination therapy.

The aim of the study is to evaluate the differences of protein binding of NAMI-A, a new ruthenium drug endowed with selective antimetastatic properties, and of cisplatin and to ascertain the possibility to use two drugs based on heavy metals in combination to treat solid tumour metastases. For this purpose, we have developed a technique that allows the proteins, to which metal drugs bind, to be identified from real protein mixtures. Following incubation with the drugs, the bands containing platinum and/or ruthenium are separated by native PAGE, SDS-PAGE and 2D gel electrophoresis, and identified using laser ablation inductively coupled plasma mass spectrometry. Both drugs interact with essentially the same proteins which, characterised by proteomics, are human serum albumin precursor, macroglobulin alpha2 and human serotransferrin precursor. The interactions of NAMI-A are largely reversible whereas cisplatin forms stronger interactions that are less reversible. These data correlate well with the MCa mammary carcinoma model on which full doses of NAMI-A combined with cisplatin show additive effects as compared to each treatment taken alone, independently of whether NAMI-A precedes or follows cisplatin. Furthermore, the implication from this study is that the significantly lower toxicity of NAMI-A, compared to cisplatin, could be a consequence of differences in the mode of binding to plasma proteins, involving weaker interactions compared to cisplatin.

Animals↗
PubMed2005

Synthesis and characterization of platinum(IV) anticancer drugs with functionalized aromatic carboxylate ligands: influence of the ligands on drug efficacies and uptake.

A series of trans-platinum(IV) complexes with functionalized aromatic carboxylate ligands, cis,cis,trans-Pt(NH3)2Cl2(CO2C6H4R)2 (R = H (3), p-vinyl (4), p-methoxy (5), p-iodo (6), p-cyano (7), or o-carboxyl (8)) was synthesized and characterized by spectroscopic methods. Crystal structures of 3, 4, 7, and 8 were obtained, which revealed that their structural conformations were influenced by intramolecular H-bonding interactions. The complexes were evaluated for cellular uptake and inhibition of cell proliferation against a panel of lung, colon, and breast carcinoma cell lines. The functionalization of the aromatic carboxylate ligand was found to have a profound influence on the uptake, and hence, efficacy, of this class of complex.

ATP Binding Cassette Transporter, Subfamily B, Mem↗
PubMed2005

Revisiting the electronic structure of phosphazenes.

Natural bond orbital (NBO) and topological electron density analyses have been used to investigate the electronic structure of phosphazenes [N3P3R6] (R = H, F, Cl, Br, CH3, CF3, N(C2H4); 2R = O2C6H4), [N4P4Cl8], and H[NPCl2]4H. Using the former, the two most likely phosphazene bonding alternatives, negative hyperconjugation and ionic bonding have been critically evaluated. Ionic bonding, as suggested by topological analysis, was found to be the dominant bonding feature, although contributions from negative hyperconjugation are necessary for a more complete bonding description. Substituent effects on the P-N bond have been assessed and cases of bond length alternation have been rationalized using this combined bonding model, which supersedes previous models involving d-orbital participation, leading to an explanation for the observed bond length alternation found in some linear polyphosphazenes. In addition, common aromaticity indicators, nucleus independent chemical shifts (NICS) and para-delocalization indices (PDI), have been determined for the cyclophosphazenes.

Journal Article↗
PubMed2005

NMR, PGSE diffusion, and X-ray diffraction studies of lithium and potassium salts derived from diphenylphosphino(o-cyanophenyl)aniline and their crown ether complexes.

1H, 31P, and 7Li pulsed-gradient spin-echo (PGSE) diffusion and variable-temperature NMR results for THF solutions of the lithium and potassium salts derived from diphenylphosphino(o-cyanophenyl)aniline are reported and compared to the solid-state results obtained via X-ray diffraction studies. The solution results favor mononuclear salts, sometimes strongly ion paired, whereas the solid-state data reveal dinuclear species. The structures of the products from reactions of these salts with crown ethers are determined via PGSE and 1H Overhauser NMR methods.

Journal Article↗