PubMed Health⌕ Search

Biomedical subjects

Paul W Brown

Publications and source records attributed to Paul W Brown.

7 recordsLinked to original sources

In vivo biodegradability and biocompatibility evaluation of novel alanine ester based polyphosphazenes in a rat model.

Amino acid ester substituted polyphosphazenes are attractive candidates for various biomedical applications because of their biocompatibility, controllable hydrolytic degradation rates, and nontoxic degradation products. In this study, the biocompatibility of three L-alanine ethyl ester functionalized polyphosphazenes was evaluated in a subcutaneous rat model. The polymers used in the study were poly[bis(ethylalanato)phosphazene] (PNEA), poly[(50% ethylalanato) (50% methylphenoxy) phosphazene] (PNEA(50)mPh(50)), and poly[(50% ethylalanato)(50% phenyl phenoxy) phosphazene] (PNEA(50)PhPh(50)). Polymer disks of diameter 7.5 mm were prepared by a solvent evaporation technique and were implanted subcutaneously in rats. After 2, 4, and 12 weeks, the polymer along with the surrounding tissues were excised, prepared, and viewed by light microscopy to evaluate the tissue responses of the implanted polymers. The tissue responses were classified as minimal, mild, or moderate, based on a biocompatibility scheme developed in our laboratory. Minimal inflammation was characterized by the presence of few neutrophils, erythrocytes, and lymphocytes; mild response was characterized by the predominant presence of macrophages, fibroblasts, or giant cells; and moderate inflammation was characterized by the abundance of macrophages, giant cells, and by the presence of tissue exudates. The in vivo degradation profiles of the polymers at various time points were evaluated by gel permeation chromatography (GPC). PNEA and PNEA(50)mPh(50) matrices elicited varying levels of tissue responses during the 12-week implantation period. At 2 weeks both polymers evoked a moderate response, and by 12 weeks the response was found to be mild. However, PNEA(50)PhPh(50) elicited a mild response at the end of 2 weeks and demonstrated a further decreased inflammatory response after 12 weeks. The in vivo degradation of the polymers was followed by determining the molecular weights of the explanted polymer disks. PNEA and PNEA(50)mPh(50) disks showed significant decrease in molecular weight after 2 weeks of implantation. The molecular weights of PNEA and PNEA(50)mPh(50) residues could not be determined by GPC after 12 weeks of implantation because of almost complete degradation. On the other hand the in vivo degradation of PNEA(50)PhPh(50) was found to be slow, with a 63% loss in molecular weight in 12 weeks. Furthermore, this polymer maintained its shape and structure during the entire study. Thus, these polymers demonstrated excellent tissue compatibility and in vivo biodegradability and can be potential candidates for various biomedical applications.

Absorbable Implants↗

Synthesis, characterization, and osteocompatibility evaluation of novel alanine-based polyphosphazenes.

This study deals with the synthesis and in vitro osteocompatibility evaluation of two novel alanine-containing biodegradable ester polyphosphazenes as candidates to form self-setting composites with hydroxyapatite (HAp) precursors. The two novel biodegradable polyphosphazenes synthesized were poly[(ethyl alanato)1.0(ethyl oxybenzoate)1.0 phosphazene] (PN-EA/EOB) and poly[(ethyl alanato)1.0(propyl oxybenzoate)1.0 phosphazene] (PN-EA/POB). The polymers were characterized by multinuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), and gel permeation chromatography (GPC). Biodegradability and percentage water absorption of the polymers were evaluated by following the mass change in phosphate buffer (pH 7.4) at 37 degrees C. PN-EA/POB underwent faster degradation and showed higher water absorption compared to PN-EA/EOB. Both polymers became insoluble in common organic solvents following hydrolysis presumably due to crosslinking reactions accompanying the degradation process. Osteoblast cell adhesion and proliferation on PN-EA/EOB and PN-EA/POB was followed by scanning electron microscopy (SEM) and by using a biochemical assay. Both PN-EA/EOB and PN-EA/POB supported the adhesion and proliferation of primary rat osteoblast cells in vitro. Furthermore, the enzymatic activity of the osteoblast cells cultured on the polymers was confirmed by the alkaline phosphatase activity. Thus, these biodegradable amino-acid-based polyphosphazenes are promising new materials for forming self-setting bone cements.

Alanine↗

Effect of side group chemistry on the properties of biodegradable L-alanine cosubstituted polyphosphazenes.

Biodegradable polyphosphazenes have been investigated for a variety of applications, such as controlled drug delivery matrixes, tissue-engineering scaffolds, membranes, and bone-type composites. In this study we have evaluated the effect of side group chemistry on the properties of biodegradable phosphazene polymers that contain ethyl alanato side groups together with ethyl glycinato, p-methylphenoxy, or p-phenylphenoxy side groups. The polymers were synthesized by a macromolecular substitution route. The molecular weights of aryloxy/amino acid ester cosubstituted polymers were much higher than the amino acid ester substituted polyphosphazenes described earlier. Polymer properties, such as glass transition temperature, hydrolytic degradation, surface wettability, tensile strength, and modulus of elasticity varied over a wide range following changes to the type of co-substituents on the polymer backbone. The glass transition temperatures varied from -10 to 35 degrees C and increased with the bulkiness of the side groups. Polymer films in phosphate buffer saline solution showed molecular weight declines ranging from 58% to >80% and mass loss ranging from 4% to 90% over a period of 7 weeks. Water contact angles for polymer films varied from 63 degrees to 107 degrees , with the highest angles for the alanine ethyl ester and p-phenylphenoxy cosubstituted polyphosphazene. The tensile strengths were in the range of 2.4-7.6 MPa and the modulus of elasticity was in the range of 31.4-455.9 MPa. Thus, in this study we have demonstrated the tunability of biodegradable polyphosphazenes to suit a range of biomedical applications.

Alanine↗

Phase evolution during the formation of stoichiometric hydroxyapatite at 37.4 degrees C.

The mechanism of formation of stoichiometric hydroxyapatite in aqueous solution by the acid-base reaction of the precursor calcium phosphates tetracalcium phosphate [Ca4(PO4)2O, TetCP] and anhydrous dicalcium phosphate (CaHPO4, DCPA) was investigated. Phase evolution during the formation of hydroxyapatite was studied, and could be correlated with the kinetics of reaction. Initial dissolution of precursors is followed by hydroxyapatite nucleation and growth. Consumption of DCPA precedes that of TetCP and results in the formation of nonstoichiometric hydroxyapatite. As a result of continued TetCP dissolution, the pH of the solution increases towards a pH at which hydroxyapatite and Ca(OH)2 co-exist in equilibrium. Hydroxyapatite formation takes place in two stages: initially formed, nonstoichiometric hydroxyapatite subsequently reacts with TetCP and is converted to stoichiometric hydroxyapatite.

Biocompatible Materials↗

Formation of hydroxyapatite in water, Hank's solution, and serum at physiological temperature.

The influence of de-ionized water, Hank's saline solution, and bovine calf serum on formation of stoichiometric (Ca/P = 1.67) hydroxyapatite (SHAp) at physiological temperature was studied. SHAp formed in aqueous solution by acid-base reaction of particulate Ca(H(2)PO(4))(2).H(2)O and Ca(4)(PO(4))(2)O. Hydroxyapatite formation is accompanied by an initial period of surface hydration of the precursors, an induction period, and a period during which the bulk of the conversion to hydroxyapatites occurs. The formation of SHAp occurred more rapidly in Hank's solution and distilled water than in serum. The formation of SHAp from these precursors is strongly inhibited by serum. There were two primary exothermal events associated with SHAp formation: initial heat evolution peak, which was associated with reactant dissolution, and the major heat evolution peak, which was associated with SHAp formation. The presence of the constitutents in serum depresses both. This is a result of serum macromolecules adsorbing onto the available surfaces regardless of whether they are reactants or products. Variations in heat evolution behavior, pH, and the times of disappearance of the reactants and appearance of SHAp correlate with one another.

Blood Physiological Phenomena↗

Fabrication and optimization of methylphenoxy substituted polyphosphazene nanofibers for biomedical applications.

Electrospinning has developed as a unique and versatile process to fabricate ultrathin fibers in the form of nonwoven meshes or as oriented arrays from a variety of polymers. The very small dimension of these fibers can generate a high surface area, which makes them potential candidates for various biomedical and industrial applications. The objective of the present study was to develop nanofibers from polyphosphazenes, a class of inorganic-organic polymers known for high biocompatibility, high-temperature stability, and low-temperature flexibility. Specifically, we evaluated the feasibility of developing bead-free nonwoven nanofiber mesh from poly[bis(p-methylphenoxy)phosphazene] (PNmPh) by electrospinning. The effect of process parameters such as nature of solvent, concentration of the polymer solution, effect of needle diameter, and applied potential on the diameter and morphology (beaded or bead-free) of resulting nanofibers were investigated. It was found that solution of PNmPh in chloroform at a concentration range of 7% (wt/v) to 9% (wt/v) can be readily electrospun to form bead-free fibers at room temperature. The mean diameter of the fibers obtained under optimized spinning condition was found to be approximately 1.2 microm. The bead-free, cylindrical nanofibers formed under the optimized condition showed a slightly irregular surface topography with indentations of a few nanometer scale. Further, the electrospun nanofiber mats supported the adhesion of bovine coronary artery endothelial cells (BCAEC) as well as promoted the adhesion and proliferation of osteoblast like MC3T3-E1 cells.

3T3 Cells↗