PubMed Health⌕ Search

Biomedical subjects

Pedro A Bueno

Publications and source records attributed to Pedro A Bueno.

2 recordsLinked to original sources

Flow-switching device for comprehensive two-dimensional gas chromatography.

A simple flow-switching device has been developed as a differential flow modulator for comprehensive two-dimensional gas chromatography (GC x GC). The device is assembled from tubing, four tee unions, and a solenoid valve. The solenoid valve is located outside the oven of the gas chromatograph and is not in the sample path. The modulation technique has no inherent temperature restrictions and passes 100% of the primary column effluent to the secondary column(s). Secondary peaks are produced with widths at half maximum less than 100 ms when operating in GC x 2GC mode with a 2.0 s modulation period. The efficacy of this approach is demonstrated through the analysis of a standard mixture of volatile organic compounds (VOCs) and diesel fuel.

Chromatography, Gas↗

A systematic analysis of a flow-switching modulator for comprehensive two-dimensional gas chromatography.

A simple flow-switching device has been designed for use as a comprehensive two-dimensional gas chromatography modulator. The device is constructed from fused silica tubing, t-unions, and a solenoid valve. A series of experiments were conducted to determine the influence of primary flow, secondary flow, modulation time, and device dimensions on the performance of the modulator. The flow-switching device was found to produce pulses with widths near the theoretical minimum. High-performance was maintained over a wide range of modulation times. The flow-switching device did not introduce extra broadening along the primary retention axis. However, the modulator performance was optimal only over a narrow range of primary to secondary flow ratios. The ideal flow ratio is determined by the dimensions of the tubes that connect the t-unions. A simple flow resistance model has been developed that can predict the dimensions that will produce optimal results for a specified primary to secondary flow ratio. Thus, it is possible to construct a device that operates near the theoretical limit without numerous alterations. Under optimal conditions, the flow switching modulator generates peaks that are narrower than those produced by a diaphragm valve.

Journal Article↗