Biomedical subjects

Penelope C Ioannou

Publications and source records attributed to Penelope C Ioannou.

12 recordsLinked to original sources

PubMed2007

Genotyping of single-nucleotide polymorphisms by primer extension reaction in a dry-reagent dipstick format.

The primer extension (PEXT) reaction is the most widely used approach to genotyping of single-nucleotide polymorphisms (SNPs). Current methods for analysis of PEXT reaction products are based on electrophoresis, fluorescence resonance energy transfer, fluorescence polarization, pyrosequencing, mass spectrometry, microarrays, and spectrally encoded microspheres. We report the first dry-reagent dipstick method that enables rapid visual detection of PEXT products without instrumentation. The method is applied to the analysis of six SNPs in the mannose-binding lectin gene (MBL2). The genomic region that spans each SNP of interest is amplified by PCR. Two primer extension reactions are performed with allele-specific primers (for one or the other variant nucleotide), which contain an oligo(dA) segment at the 5'-end. Biotin-dUTP is incorporated in the extended strand. The product is applied to the strip followed by immersion in the appropriate buffer. As the DNA moves along the strip by capillary action, it hybridizes with oligo(dT)-functionalized gold nanoparticles, such that only extended products are captured by immobilized streptavidin at the test zone, generating a red line. A second red line is formed at the control zone of the strip by hybridization of the nanoparticles with immobilized oligo(dA). The dipstick test is complete within 10 min. We analyzed six SNPs of the mannose-binding lectin gene (MBL2) using genomic DNA from 27 patients, representing a total of 74 variant nucleotide positions. Patient genotypes showed 100% concordance with direct DNA sequencing data. The described PEXT-dipstick assay is rapid and highly accurate; it does not require specialized instrumentation or highly trained technical personnel. It is appropriate for a diagnostic laboratory where a few selected SNP markers are examined per patient with a low cost per assay.

DNA Primers↗

PubMed2006

Dry reagent dipstick test combined with 23S rRNA PCR for molecular diagnosis of bacterial infection in arthroplasty.

Periprosthetic joint infections present a challenging problem in orthopaedics. Conventional methods for detection of arthroplasty infections rely on bacterial culture of synovial fluid aspirates. During recent years, however, molecular tests that are based on DNA amplification by the polymerase chain reaction (PCR), followed by electrophoretic analysis of the products, have been introduced. We report a simple and inexpensive assay that allows visual detection and confirmation of the PCR-amplified sequences by hybridization within minutes. The assay is performed in a dry reagent dipstick format (strip) and does not require special instrumentation. Universal primers are used for PCR of the 23S ribosomal RNA (rRNA) gene. The biotinylated amplification product is hybridized with dA-tailed probes that are specific for six pathogens commonly involved in periprosthetic joint infections. The mixture is applied to the strip, which is then immersed in the appropriate buffer. The buffer migrates along the strip by capillary action and rehydrates gold nanoparticles with oligo(dT) strands attached to their surface. The nanoparticles bind to the target DNA through hybridization, and the hybrids are captured by immobilized streptavidin at the test zone of the strip, producing a characteristic red line. Unbound nanoparticles are captured by immobilized oligo(dT) strands at the control zone of the strip, generating a second line. The dipstick test was applied to the detection of Escherichia coli, Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pneumoniae, Enterococcus faesium, and Haemophilus influenza. Twelve samples of synovial fluids from patients were analyzed for the detection and identification of the infection caused by the six pathogens. The results were compared with bacterial cultures.

Arthroplasty↗

PubMed2006

Photoprotein aequorin as a novel reporter for SNP genotyping by primer extension-application to the variants of mannose-binding lectin gene.

Mannose-binding lectin (MBL) is a key component of the innate immune system, and its deficiency is associated with increased susceptibility to various infections and autoimmune disorders. Since several nucleotide variations in the mannose-binding lectin 2 gene (MBL2) have been associated with the functional deficiency of MBL, there is a growing need to screen its allelic variants and develop genotyping methods for MBL2. In this context we propose a rapid, robust, cost-efficient, and automatable method for detecting all known allelic variants of MBL2. This report introduces for the first time the photoprotein aequorin as a reporter in genotyping by primer extension (PEXT) reactions. The method involves a single PCR amplification of a genomic region that spans all six variant nucleotide sites, i.e., three structural mutations in exon 1 (c.154C>T, pArg52Cys; c.161A>G, p.Gly54Asp; and c.170A>G, p.Gly57Glu), two single nucleotide polymorphisms (SNPs) at positions c.-619G>C and c.-290G>C (promoter region), and one SNP at position c.-66C>T of the 5' untranslated region. PCR is followed by PEXT reactions for each site. Biotin-dUTP is incorporated in the extended primer. The genotyping primers contain a poly(dA) segment at their 5' end. The products are captured by hybridization on the surface of microtiter wells that are coated with a poly(dT)-albumin. The extended primers only are detected by reaction with a streptavidin-aequorin conjugate. The bound photoprotein aequorin is measured within 3 sec by simply adding Ca2+. We carried out extensive optimization studies of the PEXT reaction and genotyped the six nucleotide variant sites using blood specimens from 27 normal DNA samples. The results of the proposed method agreed entirely with the sequencing data.

5' Untranslated Regions↗

PubMed2005

High-throughput double quantitative competitive polymerase chain reaction for determination of genetically modified organisms.

Quantitative competitive polymerase chain reaction (PCR), especially the double competitive PCR methods (DC-PCR), have evolved as reliable approaches to quantification of genetically modified organisms (GMO) in food. However, DC-PCR is a low-throughput method because it requires titration of each sample with various amounts of a competitive internal standard, a protocol that involves several PCRs per sample followed by electrophoresis and densitometry. To address this drawback, we have developed a new method for GMO quantification, namely, a high-throughput double quantitative competitive PCR (HT-DCPCR). In HT-DCPCR, electrophoresis and densitometry are replaced by a rapid, microtiter well-based bioluminometric hybridization assay and there is no need for titration of each sample. The determination of GM soya was chosen as a model. We have constructed internal standards (DNA competitors) both for the 35S promoter sequence and for a plant-specific reference gene (lectin). The competitors have identical size and share the same primer binding sites with the target sequences but differ in a 24-bp internal segment. Each target sequence (35S and lectin) is coamplified with a constant amount (1000 copies) of the respective competitor. The four amplified fragments are hybridized with specific probes and captured on a universal solid phase to achieve simplicity and high throughput. The hybrids are determined by using streptavidin conjugated to the photoprotein aequorin. The ratio of the luminescence values obtained for the target and the competitor is linearly related to the starting amount of target DNA. The limit of quantification for the 35S promoter is 24 copies. The proposed method was evaluated by determining the GMO content of soybean powder certified reference materials. Also HT-DCPCR was compared to real-time PCR in a variety of real samples.

Calibration↗

PubMed2005

Nanoparticle-based DNA biosensor for visual detection of genetically modified organisms.

Although screening of raw ingredients and food products for genetically modified organisms (GMO) may be accomplished by detecting either the exogenous DNA or the novel protein, DNA is the preferred analyte because of its superior stability during food processing. The development of DNA biosensors is of increasing importance due to the growing demand for rapid and reliable methods for GMO detection. We report the first DNA biosensor in a dry-reagent dipstick configuration for visual detection and confirmation of GMO-related sequences by hybridization within minutes. The sensor is disposable and does not require special instrumentation. It detects the 35S promoter and nopaline synthase (NOS) terminator sequences that are present in the majority of transgenic plants. The target sequences are amplified by the polymerase chain reaction (PCR) and hybridized (7min) with probes bearing oligo(dA) tail. The biotinylated product is applied to the sensor followed by immersion in the appropriate buffer. Migration of the buffer rehydrates gold nanoparticles conjugated to oligo(dT), which hybridize with the oligo(dA) tails. The hybrids are captured by immobilized streptavidin at the test zone of the sensor giving a characteristic red line due to the accumulation of the nanoparticles. The excess of nanoparticle conjugates are captured at the control zone by immobilized oligo(dA) strands. Amplified 35S or NOS DNA is detectable at 0.16nM. Soybean powder certified reference material with 0.1% GMO content is clearly detectable after 35 and 40 amplification cycles for 35S and NOS sequence, respectively. The sensor was also applied to real samples from various sources.

Biosensing Techniques↗

PubMed2004

High-throughput chemiluminometric determination of prostate-specific membrane antigen mRNA in peripheral blood by RT-PCR using a synthetic RNA internal standard.

A quantitative reverse transcriptase polymerase chain reaction (RT-PCR) method, employing internal standard (IS) RNA and a simplified chemiluminometric hybridization assay, is described for the determination of prostate-specific membrane antigen (PSMA) mRNA. The recombinant RNA IS has the same binding sites and size as the amplified PSMA mRNA. Biotinylated PCR products (263 bp) from PSMA mRNA and RNA IS are captured in microtiter wells coated with streptavidin, and hybridized with alkaline phosphatase-conjugated probes. The bound alkaline phosphatase (AP) is measured by using a chemiluminogenic substrate. The ratio of the luminescence values obtained for PSMA mRNA and the RNA IS is a linear function of the initial amount of PSMA mRNA present in the sample before RT-PCR. The linear range extends from 500 to 5,000,000 PSMA mRNA copies and the overall reproducibility of the assay, including RT-PCR and hybridization, ranges from 7.4 to 16.6%. Samples containing total RNA from PSMA-expressing LNCaP cells give luminescence ratios linearly related to the number of cells in the range 0.5-5,000 cells.

Alkaline Phosphatase↗

PubMed2004

Detection of transgenes in soybean via a polymerase chain reaction and a simple bioluminometric assay based on a universal aequorin-labeled oligonucleotide probe.

The recombinant photoprotein aequorin was used as a reporter in highly sensitive and automatable hybridization assays for the analysis of transgenic sequences in genetically modified organisms (GMO). The terminator of the nopaline synthase gene (NOS) from Agrobacterium tumefaciens and the 35S promoter sequence were detected in genetically modified soybean. The endogenous, soybean-specific, lectin gene was also detected for confirmation of the integrity of extracted DNA. A universal detection reagent was produced through conjugation of aequorin to the oligonucleotide (dA)(30). Biotinylated (through PCR) products for the three target sequences were captured onto streptavidin-coated wells, and one strand was removed by NaOH treatment. The immobilized single-stranded DNAs were then hybridized with oligonucleotide probes consisting of a target-specific segment and a poly(dT) tail. This allowed the subsequent determination of all hybrids through the use of the (dA)(30)-aequorin conjugate as a universal reagent. The bound aequorin was measured by adding Ca(2+) and integrating the light emission for 3 s. As low as 2 pM (100 amol per well) of amplified DNA was detectable for all three targets, with a signal-to-background ratio of about 2. The analytical range extended up to 2000 pM. As low as 0.05% GMO content in soybean can be detected with a signal-to-background ratio of 8.2. The overall repeatability of the proposed assay, including DNA extraction, PCR, and hybridization assay, ranged from 7.5-19.8%. The use of a (dA)(30)-aequorin conjugate renders the assay configuration general for any target DNA, provided that the specific probe carries a poly(dT) tail.

Aequorin↗

PubMed2004

Rapid analysis of genetically modified organisms by in-house developed capillary electrophoresis chip and laser-induced fluorescence system.

A microfabricated, inexpensive, reusable glass capillary electrophoresis chip and a laser-induced fluorescence system were developed in-house for the rapid DNA-based analysis of genetically modified organisms (GMOs). The 35S promoter sequence of cauliflower mosaic virus and the terminator of the nopaline synthase (NOS) gene from Agrobacterium tumefaciens were both detected since they are present in most genetically modified organisms. The detection of genetically modified soybean in the presence of unaltered soybean was chosen as a model. Lectin, a plant-specific gene, was also detected for confirmation of the integrity of extracted DNA. The chip was composed of two glass plates, each 25 x 76 mm, thermally bonded together to form a closed structure. Photomasks with cross-topology were prepared rapidly by using polymeric material instead of chrome plates. The widths of the injection and separation channels were 30 and 70 microm, respectively, the effective separation length 4.5 cm. The glass slide was etched to a depth of 30 microm for both the injection and separation channel. The cost of the chip was less than 1 $ and required 2 days for photomask preparation and microfabrication. The separation and detection of polymerase chain reaction-amplified NOS, 35S, and lectin sequences (180, 195, and 181 bp, respectively) was completed in less than 60 s. As low as 0.1% GMO content was detectable by the proposed system after 35 and 40 amplification cycles for 35S and NOS, respectively, using 25 ng of extracted DNA as starting material. This corresponds to only 20 genome copies of genetically modified soybean.

Amino Acid Oxidoreductases↗

PubMed2003

Oligonucleotide-functionalized gold nanoparticles as probes in a dry-reagent strip biosensor for DNA analysis by hybridization.

The highly specific molecular recognition properties of oligonucleotides are combined with the unique optical properties of gold nanoparticles for the development of a dry-reagent strip-type biosensor that enables visual detection of double stranded DNA within minutes. The assay does not require instrumentation and avoids the multiple incubation and washing steps performed in most current assays. Gold nanoparticle reporters with oligo(dT) attached to their surface form an integral part of the strip. Biotinylated PCR products (233 bp or 495 bp) are hybridized (5 min) with a poly(dA)-tailed oligo and applied on the strip, which is then immersed in the appropriate buffer. As the buffer migrates upward, it rehydrates the nanoparticles that are linked to the target DNA through poly(dA)/(dT) hybridization. Capture of the hybrids by immobilized streptavidin in the test zone of the strip generates a characteristic red band. A second red band is formed, by hybridization, in the control zone of the strip to indicate proper test performance. The sensor offers at least 8 times higher detectability than ethidium bromide staining of agarose gels and provides confirmation of the amplified fragments. Quantitative data are obtained by densitometric analysis of the bands. As low as 2 fmol of amplified DNA were detectable by the strip sensor. Also, 500 copies of prostate-specific antigen cDNA were detected by combining PCR and the strip sensor. The sensor was used successfully for detection of hepatitis C virus in plasma samples from 20 patients. The strip detected 16 out of 16 positive samples and gave no signal for 4 samples that were negative for the virus. To our knowledge, this is the first dry-reagent system that makes use of oligonucleotide-conjugated gold nanoparticles as probes.

Biosensing Techniques↗

PubMed2003

Determination of prostate specific antigen mRNA in peripheral blood by reverse transcriptase polymerase chain reaction and a simple chemiluminometric hybridization assay in a high-throughput format.

In recent years, the mRNA for prostate-specific antigen (PSA) has been investigated as a potential marker for molecular staging of prostate cancer. We report a simple, rapid, and sensitive assay protocol for the quantification of PSA mRNA in peripheral blood by using reverse transcriptase polymerase chain reaction (RT-PCR) and a chemiluminometric hybridization assay. A recombinant RNA internal standard (IS) that has the same size and primer binding sites as the PSA mRNA is included in the RT-PCR mixture. Total RNA from the sample is coextracted with a constant amount of IS RNA and subjected to RT-PCR. Amplified sequences are labeled with biotin during PCR by using a biotinylated upstream primer. The products are heat-denatured and hybridized with oligonucleotide-specific probes (for PSA and IS) that are immobilized in microtiter wells. Immobilization of oligonucleotide probes is achieved by adsorption of their conjugates with bovine serum albumin. The hybrids are measured using alkaline phosphatase-labeled streptavidin and a dioxetane chemiluminogenic substrate. The ratio of the luminescence values obtained for the PSA mRNA and the RNA IS is a linear function of the initial amount of PSA mRNA present in the sample prior to RT-PCR amplification. The linear range extended from 50 to 500,000 PSA mRNA copies, and the overall reproducibility of the assay, including RT-PCR and hybridization, ranged from 11.5 to 14.2%. Samples containing total RNA from PSA-expressing LNCaP cells give luminescence ratios that are linearly related to the number of cells in the range of 0.04-400 cells. The method was applied to PSA mRNA determination in peripheral blood of healthy individuals, patients with benign prostate hyperplasia, patients with prostate cancer, and patients with other types of localized cancer.

Female↗

PubMed2003

One-step purification and refolding of recombinant photoprotein aequorin by immobilized metal-ion affinity chromatography.

A hexahistidine tag was fused to the N-terminus of apoaequorin. A suitable vector encoding the fusion protein was constructed and used for transformation of Escherichia coli JM109 cells. Apoaequorin was overexpressed under the control of tac promoter. It was found, however, that most of the protein existed in the form of inclusion bodies. Inclusion bodies were solubilized with urea, followed by purification and refolding of (His)(6)-apoaequorin in a single chromatographic step by immobilized metal-ion affinity chromatography using Ni(2+)-nitrilotriacetic acid agarose. The purity, as determined by SDS-PAGE analysis, was greater than 80%. The yield was 0.7-1 mg apoaequorin from a 50 ml bacterial culture. The kinetics of light emission of purified aequorin upon addition of Ca(2+) was typical of the commercial aequorin. The luminescence of the purified aequorin was a linear function of its concentration extending over six orders of magnitude. As low as 0.5 attomoles purified aequorin gave a signal-to-noise ratio of 1.8.

Aequorin↗

PubMedDate not supplied

Affinity capture-facilitated preparation of aequorin- oligonucleotide conjugates for rapid hybridization assays.

We report a general procedure for the preparation of biomolecular conjugates that combine the molecular recognition properties of oligonucleotides with the high detectability of the photoprotein aequorin. Central to the conjugation protocols is the use of recombinant aequorin fused to a hexahistidine tag. In one protocol, an amino-modified oligonucleotide was treated with a homobifunctional cross-linker carrying two N-hydroxysuccinimide ester groups, and the derivative was allowed to react with (His)(6)-aequorin. A second strategy involved the introduction of protected sulfhydryl groups into (His)(6)-aequorin and subsequent reaction with a heterobifunctional linker containing a N-hydroxysuccinimide and a maleimide group. The strong, but reversible, binding of (His)(6)-aequorin to Ni(2+)-nitrilotriacetic acid agarose enabled the rapid and effective removal of the unreacted oligonucleotide, which otherwise diminishes the performance of the hybridization assay by competing with the conjugate for the complementary target sequence. Aequorin-oligo conjugates prepared by affinity capture showed similar performance with those purified by anion-exchange HPLC. The conjugates were applied to the development of rapid bioluminometric hybridization assays. The analytical range extended from 2 to 2000 pmol/L of target DNA. The reproducibility was less than 10%. The conjugate obtained from a reaction of 10 nmol of (His)(6)-aequorin is sufficient for about 5000 hybridization assays. The proposed conjugation strategy is general because a variety of reporter proteins can be fused to hexahistidine tag by using suitable vectors that are commercially available.

Aequorin↗