PubMed Health⌕ Search

Biomedical subjects

Per-Ake Nygren

Publications and source records attributed to Per-Ake Nygren.

At least 19 recordsLinked to original sources
PubMed2007

Affibody molecules in protein capture microarrays: evaluation of multidomain ligands and different detection formats.

The importance of the ligand presentation format for the production of protein capture microarrays was evaluated using different Affibody molecules, produced either as single 6 kDa monomers or genetically linked head-to-tail multimers containing up to four domains. The performances in terms of selectivity and sensitivity of the monomeric and the multidomain Affibody molecules were compared by immobilization of the ligands on microarray slides, followed by incubation with fluorescent-labeled target protein. An increase in signal intensities for the multimers was demonstrated, with the most pronounced difference observed between monomers and dimers. A protein microarray containing six different dimeric Affibody ligands with specificity for IgA, IgE, IgG, TNF-alpha, insulin, or Taq DNA polymerase was characterized for direct detection of fluorescent-labeled analytes. No cross-reactivity was observed and the limits of detection were 600 fM for IgA, 20 pM for IgE, 70 fM for IgG, 20 pM for TNF-alpha, 60 pM for insulin, and 10 pM for Taq DNA polymerase. Also, different sandwich formats for detection of unlabeled protein were evaluated and used for selective detection of IgA or TNF-alpha in human serum or plasma samples, respectively. Finally, the presence of IgA was determined using detection of directly Cy5-labeled normal or IgA-deficient serum samples.

Biotinylation↗
PubMed2007

ProteomeBinders: planning a European resource of affinity reagents for analysis of the human proteome.

ProteomeBinders is a new European consortium aiming to establish a comprehensive resource of well-characterized affinity reagents, including but not limited to antibodies, for analysis of the human proteome. Given the huge diversity of the proteome, the scale of the project is potentially immense but nevertheless feasible in the context of a pan-European or even worldwide coordination.

Affinity Labels↗
PubMed2005

Fluorescence-microscopy-based image analysis for analyte-dependent particle doublet detection in a single-step immunoagglutination assay.

A novel fluorescence-microscopy-based image analysis method for classification of singlet and doublet latex particles is demonstrated and applied to a particle-based immunoagglutination assay for quantification of biomolecules in microliter-volume bulk samples. The image analysis method, verified by flow cytometric agglutination analysis, is based on a pattern recognition algorithm employing Gaussian-base-function fitting which allows robust identification and counting of singlets, doublets, and higher agglomerates of fluorescent microparticles. The immunoagglutination assay is experimentally modeled by a biotin-streptavidin interaction, with the goal of both theoretically and experimentally investigating the performance of a general immunoagglutination-based assay. For this purpose a theoretical model of the initial agglutination kinetics, based on particle diffusion combined with a steric factor determined by the level of specific and nonspecific agglutination, was developed. The theoretical model combined with the experimental data can be used to optimize an agglutination-based assay with regard to sensitivity and dynamic range and to estimate the affinity, receptor surface density, molecular and binding site sizes, and level of nonspecific binding that is present in the assay. The experimental results are in good agreement with the theoretical model, indicating the usefulness of the model for immunoagglutination assay optimization.

Agglutination Tests↗
PubMed2005

Fluorescent detection of beta-lactamase activity in living Escherichia coli cells via esterase supplementation.

The TEM-1 beta-lactamase protein fragment complementation assay was investigated for its applicability in affinity protein-based interaction studies in Escherichia coli, using an affibody-based model system. Results from co-transformation experiments showed that an ampicillin resistant phenotype was specifically associated with cognate affibody-target pairings. Attempts to monitor beta-lactamase complementation in vitro with the fluorescent beta-lactamase substrates CCF2/AM and CCF2 showed that E. coli lacks an esterase activity necessary for activation of the esterified and membrane-permeable CCF2/AM form of the substrate. Interestingly, supplementation of the assay reaction with a purified fungal lipase (cutinase) resulted in efficient activation of CCF2/AM in vitro. Further, periplasmic expression of cutinase allowed for fluorescent discrimination between beta-lactamase positive and negative living E. coli cells using the CCF2/AM substrate, which should open the way for novel applications for this prokaryotic host in protein interaction studies.

Carboxylic Ester Hydrolases↗
PubMed2004

Biophysical characterization of Z(SPA-1)--a phage-display selected binder to protein A.

Affibodies are a novel class of binding proteins selected from phagemid libraries of the Z domain from staphylococcal protein A. The Z(SPA-1) affibody was selected as a binder to protein A, and it binds the parental Z domain with micromolar affinity. In earlier work we determined the structure of the Z:Z(SPA-1) complex and noted that Z(SPA-1) in the free state exhibits several properties characteristic of a molten globule. Here we present a more detailed biophysical investigation of Z(SPA-1) and four Z(SPA-1) mutants with the objective to understand these properties. The characterization includes thermal and chemical denaturation profiles, ANS binding assays, size exclusion chromatography, isothermal titration calorimetry, and an investigation of structure and dynamics by NMR. The NMR characterization of Z(SPA-1) was facilitated by the finding that trimethylamine N-oxide (TMAO) stabilizes the molten globule conformation in favor of the fully unfolded state. All data taken together lead us to conclude the following: (1) The topology of the molten globule conformation of free Z(SPA-1) is similar to that of the fully folded structure in the Z-bound state; (2) the extensive mutations in helices 1 and 2 destabilize these without affecting the intrinsic stability of helix 3; (3) stabilization and reduced aggregation can be achieved by replacing mutated residues in Z(SPA-1) with the corresponding wild-type Z residues. This stabilization is better correlated to changes in helix propensity than to an expected increase in polar versus nonpolar surface area of the fully folded state.

Bacterial Proteins↗
PubMed2004

Site-specific and reversible anchoring of active proteins onto cellulose using a cellulosome-like complex.

Protein engineering strategies facilitating controlled and spontaneous assembly of macromolecular complexes are of great interest for the design of artificial multi-enzyme systems of pre-defined composition. Here we have combined affinity proteins from different sources to achieve specific and reversible anchoring of affinity domain-tagged reporter proteins to a cellulose-anchored fusion protein. The design principle mimics the architecture of macromolecular cellulosome complexes produced by some cellulolytic microbes. A fusion protein between a cellulose-binding module (CBM1Cel6A) of the Trichoderma reesei cellobiohydrolase Cel6A and a five-domain staphylococcal protein A (SPA) was constructed to serve as platform for docking of easily detectable reporter proteins onto cellulose surfaces. In turn, the reporter proteins were produced as fusions to two copies of a SPA-binding affinity protein (an affibody denoted Z(SPA-1)), selected from a phage display library constructed by combinatorial protein engineering. In a series of experiments, involving repeated washing and low pH elution, affinity-tagged Enhanced Green Fluorescent Protein (EGFP) and Fusarium solani pisi lipase cutinase reporter proteins were both found to be specifically directed from solution to the same region of a cellulose filter paper where SPA-CBM1Cel6A fusion protein had been previously applied. This showed that the SPA-CBM1Cel6A fusion protein had been stably anchored to the cellulose surface without loss of binding capacity and that the interaction between SPA and the Z(SPA-1) affibody domains was selective. The generality of this biospecificity-driven system for assembly applications is discussed.

Cellulose↗
PubMed2004

Binding proteins from alternative scaffolds.

The use of so-called protein scaffolds for the generation of novel binding proteins via combinatorial engineering has recently emerged as a powerful alternative to natural or recombinant antibodies. This concept requires an extraordinary stable protein architecture tolerating multiple substitutions or insertions at the primary structural level. With respect to broader applicability it should involve a type of polypeptide fold which is observed in differing natural contexts and with distinct biochemical functions, so that it is likely to be adaptable to novel molecular recognition purposes. The quickly growing number of approaches can be classified into three groups: carrier proteins for the display of single variegated loops, scaffolds providing rigid elements of secondary structure, and protein frameworks supporting a group of conformationally variable loops in a fixed spatial arrangement. Generally, such artificial receptor proteins should be based on monomeric and small polypeptides that are robust, easily engineered, and efficiently produced in inexpensive prokaryotic expression systems. Today, progress in protein library technology allows for the parallel development of immunoglobulin (Ig) as well as scaffold-based affinity reagents. Both biomolecular tools have the potential to complement each other, thus expanding the possibility to find an affinity reagent suitable for a given application. The repertoire of protein scaffolds hitherto recruited for combinatorial protein engineering purposes will probably be further expanded in the future, including both additional natural proteins and de novo designed proteins, contributing to the collection of libraries available at present. In this review both the structural features and the practical use of scaffold proteins will be discussed and exemplified.

Animals↗
PubMed2003

Microbead display of proteins by cell-free expression of anchored DNA.

Gene expression technologies where nucleic acid sequences remain physically linked to their corresponding gene products are important tools for selection and identification of rare variants in large protein libraries. Here, we describe a gene expression system, which combines the potential of bead-based suspension array technology (SAT) with gene expression and clonal identification. Using streptavidin-coated polystyrene micrometer-sized beads as solid supports for anchored PCR products, we have investigated conditions for cell-free expression and bioaffinity technology to provide clonal co-anchoring of corresponding gene products. Experiments showed that coupled transcription and translation of PCR product expression cassettes resulted in display of affinity-anchored proteins whose binding characteristics could be analyzed via direct and selective interaction with a fluorescently labeled target protein. Interestingly, experiments performed with differently biotinylated PCR products showed that the efficiency of display was dependent on the directionality of the expression cassette relative to the bead surface. In spiked systems, using small immunoglobulin binding proteins as models, we demonstrate efficient flow cytometric sorting of beads corresponding to the target interacting clones, verified by post-sorting analysis and clonal identification at DNA level. The use of this technology, including alternative formats, for different proteomics applications is discussed.

Adsorption↗
PubMed2003

Affibody-beta-galactosidase immunoconjugates produced as soluble fusion proteins in the Escherichia coli cytosol.

Recombinant immunoconjugates constitute a novel class of immunoassay reagents produced by genetic fusion between an antigen recognizing moiety and a reporter enzyme or fluorescent protein, obviating the need for chemical coupling. In this work, we describe the construction, Escherichia coli production and characterization of recombinant beta-galactosidase (beta-gal)-based immunoconjugates directed to human immunoglobulin A (IgA). As the antigen recognizing moieties, either monovalent or dimeric (head-to-tail) versions of an IgA-specific affibody (Z(IgA1)) were used, previously selected in vitro from a protein library based on combinatorial engineering of a single staphylococcal protein A domain. To increase the likelihood of proper presentation on the assembled homotetrameric enzyme surface, the affibody moieties were linked to the N-terminus of the enzyme subunits via a heptapeptide linker sequence. The two resulting immunoconjugates Z(IgA1)-beta-gal and (Z(IgA1))(2)-beta-gal, containing four and eight affibody moieties per enzyme, respectively, could be expressed as soluble and proteolytically stable proteins intracellularly in E. coli from where they were purified to high purity by a single anion exchange chromatography step. The yields of immunoconjugates were in the range 200-400 mg/l culture. Biosensor-binding studies showed that both the Z(IgA1)-beta-gal and (Z(IgA1))(2)-beta-gal immunoconjugates were capable of selective IgA-recognition, but with an apparent higher binding affinity for the variant containing divalent affibody moieties, presumably due to avidity effects. The applicability of this class of recombinant immunoconjugates was demonstrated by IgA detection in enzyme-linked immunosorbent assay (ELISA) and dot-blot analyses. In addition, using human kidney biopsy samples from a nephropathy patient, IgA depositions in glomeruli could be detected by immunohistochemistry with low background staining of tissue.

Biosensing Techniques↗
PubMed2003

Structural basis for recognition by an in vitro evolved affibody.

The broad binding repertoire of antibodies has permitted their use in a wide range of applications. However, some uses of antibodies are precluded due to limitations in the efficiency of antibody generation. In vitro evolved binding proteins, selected from combinatorial libraries generated around various alternative structural scaffolds, are promising alternatives to antibodies. We have solved the crystal structure of a complex of an all alpha-helical in vitro selected binding protein (affibody) bound to protein Z, an IgG Fc-binding domain derived from staphylococcal protein A. The structure of the complex reveals an extended and complementary binding surface with similar properties to protein-antibody interactions. The surface region of protein Z recognized by the affibody is strikingly similar to the one used for IgG(1) Fc binding, suggesting that this surface contains potential hot-spots for binding. The implications of the selected affibody binding-mode for its application as a universal binding protein are discussed.

Amino Acid Sequence↗
PubMed2003

An affibody in complex with a target protein: structure and coupled folding.

Combinatorial protein engineering provides powerful means for functional selection of novel binding proteins. One class of engineered binding proteins, denoted affibodies, is based on the three-helix scaffold of the Z domain derived from staphylococcal protein A. The Z(SPA-1) affibody has been selected from a phage-displayed library as a binder to protein A. Z(SPA-1) also binds with micromolar affinity to its own ancestor, the Z domain. We have characterized the Z(SPA-1) affibody in its uncomplexed state and determined the solution structure of a Z:Z(SPA-1) protein-protein complex. Uncomplexed Z(SPA-1) behaves as an aggregation-prone molten globule, but folding occurs on binding, and the original (Z) three-helix bundle scaffold is fully formed in the complex. The structural basis for selection and strong binding is a large interaction interface with tight steric and polar/nonpolar complementarity that directly involves 10 of 13 mutated amino acid residues on Z(SPA-1). We also note similarities in how the surface of the Z domain responds by induced fit to binding of Z(SPA-1) and Ig Fc, respectively, suggesting that the Z(SPA-1) affibody is capable of mimicking the morphology of the natural binding partner for the Z domain.

Antibodies↗
PubMed2003

Evaluation of different linker regions for multimerization and coupling chemistry for immobilization of a proteinaceous affinity ligand.

Alkaline conditions are generally preferred for sanitization of chromatography media by cleaning-in-place (CIP) protocols in industrial biopharmaceutical processes. The use of such rigorous conditions places stringent demands on the stability of ligands intended for use in affinity chromatography. Here, we describe efforts to meet these requirements for a divalent proteinaceous human serum albumin (HSA) binding ligand, denoted ABD*dimer. The ABD*dimer ligand was constructed by genetic head-to-tail linkage of two copies of the ABD* moiety, which is a monovalent and alkali-stabilized variant of one of the serum albumin-binding motifs of streptococcal protein G. Dimerization was performed to investigate whether a higher HSA-binding capacity could be obtained by ligand multimerization. We also investigated the influence on alkaline stability and HSA-binding capacity of three variants (VDANS, VDADS and GGGSG) of the inter-domain linker. Biosensor binding studies showed that divalent ligands coupled using non-directed chemistry demonstrate an increased molar HSA-binding capacity compared with monovalent ligands. In contrast, equal molar binding capacities were observed for both types of ligands when using directed ligand coupling chemistry involving the introduction and recruitment of a unique C-terminal cysteine residue. Significantly higher molar binding capacities were also detected when using the directed coupling chemistry. These results were confirmed in affinity chromatography binding capacity experiments, using resins containing thiol-coupled ligands. Interestingly, column sanitization studies involving exposure to 0.1 M NaOH solution (pH 13) showed that of all the tested constructs, including the monovalent ligand, the divalent ligand construct containing the VDADS linker sequence was the most stable, retaining 95% of its binding capacity after 7 h of alkaline treatment.

Bacterial Proteins↗
PubMed2002

A novel affinity gene fusion system allowing protein A-based recovery of non-immunoglobulin gene products.

An expression vector system has been developed, taking advantage of a novel, Staphylococcus aureus protein A (SPA)-binding affinity tag Z(SPA-1), enabling straightforward affinity blotting procedures and efficient recovery by affinity purification of expressed gene products on readily available reagents and chromatography media. The 58 amino acid SPA-binding affinity tag Z(SPA-1), was previously selected from a library constructed by combinatorial mutagenesis of a protein domain from SPA. An Escherichia coli expression vector for intracellular T7 promoter (P(T7)) driven production was constructed with an N-terminal dual affinity tag, consisting of a hexahistidyl (His(6)) tag in frame with the Z(SPA-1) tag, thus allowing alternative affinity recovery methods. To evaluate the system, five cDNA clones from a mouse testis cDNA library were expressed, and two alternative blotting procedures were developed for convenient screening of expression efficiencies. The five produced fusion proteins were recovered on both immobilized metal-ion affinity chromatography (IMAC) columns and on Protein A-based chromatography media, to allow comparative studies. It was found that the Protein A-based recovery resulted in the highest degree of purity, and furthermore, gene products that were produced as inclusion bodies could after denaturation be efficiently affinity purified on Protein A-Sepharose in the presence of 0.5 M guanidine hydrochloride. The convenience and robustness of the presented expression system should make it highly suitable for various high-throughput protein expression efforts.

Amino Acid Sequence↗
PubMed2002

Anti-idiotypic protein domains selected from protein A-based affibody libraries.

Three pairs of small protein domains showing binding behavior in analogy with anti-idiotypic antibodies have been selected using phage display technology. From an affibody protein library constructed by combinatorial variegation of the Fc binding surface of the 58 residue staphylococcal protein A (SPA)-derived domain Z, affibody variants have been selected to the parental SPA scaffold and to two earlier identified SPA-derived affibodies. One selected affibody (Z(SPA-1)) was shown to recognize each of the five domains of wild-type SPA with dissociation constants (K(D)) in the micromolar range. The binding of the Z(SPA-1) affibody to its parental structure was shown to involve the Fc binding site of SPA, while the Fab-binding site was not involved. Similarly, affibodies showing anti-idiotypic binding characteristics were also obtained when affibodies previously selected for binding to Taq DNA polymerase and human IgA, respectively, were used as targets for selections. The potential applications for these types of affinity pairs were exemplified by one-step protein recovery using affinity chromatography employing the specific interactions between the respective protein pair members. These experiments included the purification of the Z(SPA-1) affibody from a total Escherichia coli cell lysate using protein A-Sepharose, suggesting that this protein A/antiprotein A affinity pair could provide a basis for novel affinity gene fusion systems. The use of this type of small, robust, and easily expressed anti-idiotypic affibody pair for affinity technology applications, including self-assembled protein networks, is discussed.

Antibodies, Anti-Idiotypic↗
PubMed2002

Construction and characterization of affibody-Fc chimeras produced in Escherichia coli.

Affibody-Fc chimeras were constructed by genetic fusion between different affibody affinity proteins with prescribed specificities and an Fc fragment derived from human IgG. Using affibody ligands previously selected for binding to respiratory syncytial virus (RSV) surface protein G and Thermus aquaticus (Taq) DNA polymerase, respectively, affibody-Fc fusion proteins showing spontaneous Fc fragment-mediated homodimerization via disulfide bridges were produced in Escherichia coli and affinity purified on protein A Sepharose from bacterial periplasms at yields ranging between 1 and 6 mg/l culture. Further characterization of the chimeras using biosensor technology showed that the affibody moieties have retained high selectivities for their respective targets after fusion to the Fc fragment. Avidity effects in the target binding were observed for the affibody-Fc chimeras compared to monovalent affibody fusion proteins, indicating that both affibody moieties in the chimeras were accessible and contributed in the binding. Fusion of a head-to-tail dimeric affibody moiety to the Fc fragment resulted in tetravalent affibody constructs which showed even more pronounced avidity effects. In addition, the Fc moiety of the chimeras was demonstrated to be specifically recognized by anti-human IgG antibody enzyme conjugates. One application for this class of "artificial antibodies" was demonstrated in a western blotting experiment in which one of the anti-RSV surface protein G affibody-Fc chimeras was demonstrated to be useful for specific detection of the target protein in a complex background consisting of a total E. coli lysate. The results show that through the replacement of the Fab portion of an antibody for an alternative binding domain based on a less complicated structure, chimeric proteins compatible with bacterial production routes containing both antigen recognition domains and Fc domains can be constructed. Such "artificial antibodies" should be interesting alternatives to, for example, whole antibodies or scFv-Fc fusions as detection devices and in diagnostic or therapeutic applications.

Amino Acid Sequence↗
PubMed2002

Functional selection of phage displayed peptides for facilitated design of fusion tags improving aqueous two-phase partitioning of recombinant proteins.

Aqueous two-phase systems allow for the unequal distribution of proteins and other molecules in water-rich solutions containing phase separating polymers or surfactants. One approach to improve the partitioning properties of recombinant proteins is to produce the proteins as fused to certain peptide tags. However, the rational design of such tags has proven difficult since it involves a compromise between multivariate parameters such as partitioning properties, solvent accessibility and production/secretion efficiency. In this work, a novel approach for the identification of suitable peptide tag extensions has been investigated. Using the principles of selection, rather than design, peptide sequences contributing to an improved partitioning have been identified using phage display technology. A 40 million member phagemid library of random nona-peptides, displayed as fusion to the major coat protein pVIII of the filamentous phage M13, was employed in the selection of top-phase partitioning phage particles in a PEG/sodium phosphate system. After multiple cycles of selection by partitioning, peptides with high frequencies of both tyrosine and proline residues were found to be over represented in selected clones. The identified peptide sequences, or derivatives thereof, were subsequently individually analyzed for their partitioning behavior as displayed on phage, as free synthetic peptides and as genetically fused to a recombinant model target protein. The results showed that novel peptide sequences capable of enhancing top-phase partitioning without interfering with protein production and secretion indeed could be identified for the aqueous two-phase system investigated.

Amino Acid Sequence↗
PubMed2002

Strategy for highly selective ion-exchange capture using a charge-polarizing fusion partner.

To achieve efficient recovery of recombinantly produced target proteins using cation-exchange chromatography, a novel basic protein domain is used as a purification handle. The proteolytic instability usually encountered for basic peptide tags is avoided by the use of a highly constrained alpha-helical domain based on staphylococcal protein A into which positively charged amino acids have been introduced. Here we show that this domain, consisting of 58 amino acids with a calculated isoelectric point (pI) of 10.5, can be used to efficiently capture different fused target proteins, such as a bacterial DNA polymerase (Klenow fragment), a viral protease (3C) and a fungal lipase (Cutinase). In contrast to standard cation-exchange chromatography, efficient capture can be achieved also at a pH value higher than the pI of the fusion protein, demonstrated here by Zbasic-Klenow polymerase (pI approximately/= 5.8) and ZZ-Cutinase-Zbasic (pI approximately/= 7.2) both purified at a pH of 7.5. These results show that the Zbasic domain is able to confer a regional concentration of positive charge on the fusion protein even at a relatively high pH. Hence, the data suggest that this domain could be used for highly efficient and selective capture of target proteins at conditions where most host-cell proteins do not bind to the chromatographic resin. The obtained purity after this one-step procedure suggests that the strategy could be an alternative to standard affinity chromatography. Methods for site-specific proteolysis of the fusion proteins to release native target proteins are also discussed.

Base Sequence↗