Biomedical subjects

Peter C Stair

Publications and source records attributed to Peter C Stair.

10 recordsLinked to original sources

PubMed2006

The adaptable lyonsite structure.

Crystal frameworks that can accommodate a wide range of elements, oxidation states, and stoichiometries are an important component of solid-state chemistry. These frameworks allow for unique comparisons of different metal-cation compositions with identical atomic arrangements. The mineral Lyonsite, alpha-Cu(3)Fe(4)(VO(4))(6), is emerging as the archetypal framework structure for a large class of materials, similar to known frameworks such as perovskite, garnet, apatite, and spinel. The new lyonsite-type oxides Li(2.82)Hf(0.795)Mo(3)O(12) and Li(3.35)Ta(0.53)Mo(3)O(12), in which hafnium and tantalum retain their highest oxidation states, are presented to advance the concept of the lyonsite structure as an adaptable framework.

Journal Article↗

PubMed2006

Imaging of atomic layer deposited (ALD) tungsten monolayers on alpha-TiO2(110) by X-ray standing wave Fourier inversion.

A single atomic layer of tungsten grown by atomic layer deposition (ALD) on a single-crystal rutile TiO2(110) support is studied by the X-ray standing wave (XSW) technique. The surface structural and chemical properties were also examined using atomic force microscopy, X-ray photoelectron spectroscopy, and low-energy electron diffraction. The XSW measured set of hkl Fourier components for the W atomic distribution function are summed together to produce a model-independent 3D map of the W atoms relative to the rutile lattice. The 3D atomic image shows surface tungsten atoms equally occupying the two nonequivalent Ti sites with a slight outward displacement. This corresponds to the atop and bridge sites with respect to the underlying lattice oxygen atoms. These XSW measurements clearly show that ALD conformal layers can be highly coherent with respect to the substrate lattice.

Journal Article↗

PubMed2006

Structure of Mg2.56V1.12W0.88O8 and vibrational raman spectra of Mg2.5VWO8 and Mg2.5VMoO8.

Mg(2.56)V(1.12)W(0.88)O(8) crystals were grown from a MgO/V(2)O(5)/WO(3) melt. X-ray single-crystal diffraction studies revealed that it is orthorhombic with space group Pnma, a = 5.0658(5) A, b = 10.333(1) A, c = 17.421(2) A, Z = 6, and is isostructural with Mg(2.5)VMoO(8). Raman spectra are reported, and the assignment of the Raman bands is made by comparing the metal-oxygen vibrations of VO(4)/WO(4) tetrahedra in Mg(2.5)VWO(8) with the metal-oxygen vibrations of VO(4)/MoO(4) tetrahedra in Mg(2.5)VMoO(8). The stretching vibrations appearing at 1016 and 1035 cm(-)(1) are assigned to Mo=O and W=O double bonds, respectively, associated with the Mg(2+) cation vacancies.

Journal Article↗

PubMed2006

Probing the vanadyl and molybdenyl bonds in complex vanadomolybdate structures.

A solid solution was found to exist in the quaternary Li(2)O-MgO-V(2)O(5)-MoO(3) system between the two phases Mg(2.5)VMoO(8) and Li(2)Mg(2)(MoO(4))(3). Both Mg(2.5)VMoO(8) and Li(2)Mg(2)(MoO(4))(3) are isostructural with the mineral lyonsite, and substitution according to the formula square(1/4-x/6)Li(4x/3)Mg(15/4-7x/6)V(3/2-x)Mo(3/2+x)O(12) (0 < or = x < or = 1.5, where square denotes a cation vacancy) demonstrates that a complete solid solution exits coupling the addition of molybdenum and lithium with the subtraction of cation vacancies, magnesium, and vanadium and vice versa. Vibrational Raman spectroscopy indicates that molybdenum-oxo double bonds preferentially associate with the cation vacancies.

Journal Article↗

PubMed2005

Localized surface plasmon resonance nanosensor: a high-resolution distance-dependence study using atomic layer deposition.

Atomic layer deposition (ALD) is used to deposit 1-600 monolayers of Al(2)O(3) on Ag nanotriangles fabricated by nanosphere lithography (NSL). Each monolayer of Al(2)O(3) has a thickness of 1.1 A. It is demonstrated that the localized surface plasmon resonance (LSPR) nanosensor can detect Al(2)O(3) film growth with atomic spatial resolution normal to the nanoparticle surface. This is approximately 10 times greater spatial resolution than that in our previous long-range distance-dependence study using multilayer self-assembled monolayer shells. The use of ALD enables the study of both the long- and short-range distance dependence of the LSPR nanosensor in a single unified experiment. Ag nanoparticles with fixed in-plane widths and decreasing heights yield larger sensing distances. X-ray photoelectron spectroscopy, variable angle spectroscopic ellipsometry, and quartz crystal microbalance measurements are used to study the growth mechanism. It is proposed that the growth of Al(2)O(3) is initiated by the decomposition of trimethylaluminum on Ag. Semiquantitative theoretical calculations were compared with the experimental results and yield excellent agreement.

Aluminum Oxide↗

PubMed2005

Effect of atomic layer deposition coatings on the surface structure of anodic aluminum oxide membranes.

Anodic aluminum oxide (AAO) membranes were characterized by UV Raman and FT-IR spectroscopies before and after coating the entire surface (including the interior pore walls) of the AAO membranes by atomic layer deposition (ALD). UV Raman reveals the presence of aluminum oxalate in bulk AAO, both before and after ALD coating with Al2O3, because of acid anion incorporation during the anodization process used to produce AAO membranes. The aluminum oxalate in AAO exhibits remarkable thermal stability, not totally decomposing in air until exposed to a temperature >900 degrees C. ALD was used to cover the surface of AAO with either Al2O3 or TiO2. Uncoated AAO have FT-IR spectra with two separate types of OH stretches that can be assigned to isolated OH groups and hydrogen-bonded surface OH groups, respectively. In contrast, AAO surfaces coated by ALD with Al2O3 display a single, broad band of hydrogen-bonded OH groups. AAO substrates coated with TiO2 show a more complicated behavior. UV Raman results show that very thin TiO2 coatings (1 nm) are not stable upon annealing to 500 degrees C. In contrast, thicker coatings can totally cover the contaminated alumina surface and are stable at temperatures in excess of 500 degrees C.

Journal Article↗

PubMed2005

On the structure of vanadium oxide supported on aluminas: UV and visible raman spectroscopy, UV-visible diffuse reflectance spectroscopy, and temperature-programmed reduction studies.

Vanadia species on aluminas (delta- and gamma-Al2O3) with surface VOx density in the range 0.01-14.2 V/nm2 have been characterized by UV and visible Raman spectroscopy, UV-visible diffuse reflectance spectroscopy (UV-Vis DRS), and temperature-programmed reduction in hydrogen. It is shown that the alumina phase has little influence on the structure and reducibility of surface VOx species under either dehydrated or hydrated conditions. Three similar types of dispersed VOx species, i.e., monovanadates, polyvanadates, and V2O5, are identified on both aluminas under dehydrated conditions. Upon hydration, polymerized VOx species dominate on the surfaces of the two aluminas. The broad Raman band at around 910 cm(-1), observed on dehydrated V/delta-, gamma-Al2O3 at all V loadings (0.01-14.2 V/nm2), is assigned to the interface mode (V-O-Al) instead of the conventionally assigned V-O-V bond. The direct observation of the interface bond is of significance for the understanding of redox catalysis because this bond has been considered to be the key site in oxidation reactions catalyzed by supported vanadia. Two types of frequency shifts of the V=O stretching band (1013-1035 cm(-1)) have been observed in the Raman spectra of V/Al2O3: a shift as a function of surface VOx density and a shift as a function of excitation wavelength. The shift of the V=O band to higher wavenumbers with increasing surface VOx density is due to the change of VOx structure. The V=O stretching band in dispersed vanadia always appears at lower wavenumber in UV Raman spectra than in visible Raman spectra for the same V/Al2O3 sample. This shift is explained by selective resonance enhancement according to the UV-Vis DRS results. It implies that UV Raman has higher sensitivity to isolated and less polymerized VOx species while visible Raman is more sensitive to highly polymerized VOx species and crystalline V2O5. These results show that a multiwavelength excitation approach provides a more complete structural characterization of supported VOx catalysts.

Journal Article↗

PubMed2005

In situ ultraviolet Raman spectroscopy of the reduction of chromia on alumina catalysts.

A fluidized bed in situ cell is used to examine the chromia on alumina catalyst surface. The loading is varied from 1 to 20% chromium oxide on alumina. The structure of the surface is monitored as a function of temperature, reduction, and hydration. This is the first study to use ultraviolet excitation to study a reduced chromium catalyst surface. Reduction of the sample in hydrogen gas leads to the formation of noncrystalline Cr(3+) species. Addition of potassium to the surface reduces the size of the chromia clusters.

Journal Article↗

PubMed2003

Nanocrystalline todorokite-like manganese oxide produced by bacterial catalysis.

We describe the characterization of an unknown and difficult to identify but geochemically and environmentally significant MnOx structure produced by a freshwater bacterium, Leptothrix discophora SP-6, using combined transmission electron microscopy (TEM), extended X-ray absorption fine structure (EXAFS), and UV Raman spectroscopy. The large surface-to-volume ratio of the needle-shaped nanocrystalline MnO2 formed around the bacterial cells coupled to the porous, zeolite-like structure has the potential to catalyze reactions and oxidize and adsorb metals.

Catalysis↗

PubMed2003

UV Raman spectrum of 1,3-dimethylcyclopentenyl cation adsorbed in zeolite H-MFI.

The first Raman spectrum of an adsorbed carbenium ion has been measured: The 1,3-dimethylcyclopentenyl cation adsorbed in zeolite H-MFI. 1,3-Dimethylcyclopentenyl cation has been observed as a component of the hydrocarbon pool formed during the methanol-to-gasoline process catalyzed by zeolite H-MFI. The Raman shifts recorded for 1,3-dimethylcyclopentenyl cation are in remarkable agreement with computer calculations of the vibrational band positions for the isolated cation. This agreement suggests that the cation is unperturbed by interactions with the zeolite pore walls so that Raman spectra of free or solution-phase hydrocarbons can be used to identify these same species adsorbed in zeolite pores.

Journal Article↗