Biomedical subjects

Peter Dannberg

Publications and source records attributed to Peter Dannberg.

4 recordsLinked to original sources

PubMed2005

Thin compound-eye camera.

An artificial compound-eye objective fabricated by micro-optics technology is adapted and attached to a CMOS sensor array. The novel optical sensor system with an optics thickness of only 0.2 mm is examined with respect to resolution and sensitivity. An optical resolution of 60 x 60 pixels is determined from captured images. The scaling behavior of artificial compound-eye imaging systems is analyzed. Cross talk between channels fabricated by different technologies is evaluated, and the influence on an extension of the field of view by addition of a (Fresnel) diverging lens is discussed. The lithographic generation of opaque walls between channels for optical isolation is experimentally demonstrated.

Animals↗

PubMed2004

Implementation of field lens arrays in beam-deflecting microlens array telescopes.

Laterally displaceable microlens array telescopes allow for variable and fast beam deflection. The generation of spurious light usually leads to a reduction of transfer efficiency with increasing displacement. We present the introduction of an array of field lenses on the back side of a recollimating microlens array that results in a reduced deflection angle dependency of transfer efficiency. A paraxial matrix formalism is used to prove the theoretical elimination of spurious light by use of a field lens array. The fabrication of well-aligned double-sided lens arrays by UV replication is discussed. Measurements of transfer efficiency with and without the use of field lens arrays are compared with the results of numerical wave-optic simulations.

Journal Article↗

PubMed2004

Artificial apposition compound eye fabricated by micro-optics technology.

By exploring micro-optical design principles and technology, we have developed an artificial apposition compound eye. The overall thickness of the imaging system is only 320 microm, the diagonal field of view is 21 degrees, and the f-number is 2.6. The monolithic device consists of an UV-replicated microlens array upon a thin silica substrate with a pinhole array in a metal layer on the back side. The pitch of the pinholes differs from that of the lens array to provide individual viewing angle for each channel. Theoretical limitations of resolution and sensitivity are discussed as well as fabrication issues and compared with experimental results. A method to generate nontransparent walls between optical channels to prevent cross talk is proposed.

Journal Article↗

PubMed2003

Formation of micro-optical structures by self-writing processes in photosensitive polymers.

A local exposure of UV-sensitive polymers leads to a local curing. This corresponds to a saturable and irreversible nonlinear change of the refractive index, which evidently leads to a filamentation of the hardening polymer. This paper investigates the physical background of these effects and analyzes how the different influencing factors could be used for a steered, partly self-written formation of micro-optical structures. The structure formation is simulated on the basis of an iterative beam propagation method with consideration of a set of process parameters, e.g., the photoinitiator concentration or the exposure intensity. It is shown theoretically as well as experimentally that a variation of material- and exposure-specific process parameters gives opportunities for a controlled structure formation. The experimental realization of a configuration by use of a beam shaper within a UV contact exposure process is presented by means of the preparation of high-aspect-ratio conic structures.

Journal Article↗