PubMed Health⌕ Search

Biomedical subjects

Peter E Prevelige

Publications and source records attributed to Peter E Prevelige.

At least 19 recordsLinked to original sources

Molecular dissection of ø29 scaffolding protein function in an in vitro assembly system.

An in vitro assembly system was developed to study prolate capsid assembly of phage ø29 biochemically, and to identify regions of scaffolding protein required for its functions. The crowding agent polyethylene glycol can induce bacteriophage ø29 monomeric capsid protein and dimeric scaffolding protein to co-assemble to form particles which have the same geometry as either prolate T=3 Q=5 procapsids formed in vivo or previously observed isometric particles. The formation of particles is a scaffolding-dependent reaction. The balance between the fidelity and efficiency of assembly is controlled by the concentration of crowding agent and temperature. The assembly process is salt sensitive, suggesting that the interactions between the scaffolding and coat proteins are electrostatic. Three N-terminal ø29 scaffolding protein deletion mutants, Delta 1-9, Delta 1-15 and Delta 1-22, abolish the assembly activity. Circular dichroism spectra indicate that these N-terminal deletions are accompanied by a loss of helicity. The inability of these proteins to dimerize suggests that the N-terminal region of the scaffolding protein contributes to the dimer interface and maintains the structural integrity of the dimeric protein. Two C-terminal scaffolding protein deletion mutants, Delta 79-97 and Delta 62-97, also fail to promote assembly. However, the secondary structure and the dimerization ability of these mutants are unchanged relative to wild-type, which suggests that the C terminus is the likely site of interaction with the capsid protein.

Bacteriophage P22↗

Macromolecular mass spectrometry and electron microscopy as complementary tools for investigation of the heterogeneity of bacteriophage portal assemblies.

The success of electron-cryo microscopy (cryo-EM) and image reconstruction of cyclic oligomers, such as the viral and bacteriophage portals, depends on the accurate knowledge of their order of symmetry. A number of statistical methods of image analysis address this problem, but often do not provide unambiguous results. Direct measurement of the oligomeric state of multisubunit protein assemblies is difficult when the number of subunits is large and one subunit renders only a small increment to the full size of the oligomer. Moreover, when mixtures of different stochiometries are present techniques such as analytical centrifugation or size-exclusion chromatography are also less helpful. Here, we use electrospray ionization mass spectrometry to directly determine the oligomeric states of the in vitro assembled portal oligomers of the phages P22, Phi-29 and SPP1, which range in mass from 430 kDa to about 1 million Da. Our data unambiguously reveal that the oligomeric states of Phi-29 and SPP1 portals were 12 and 13, respectively, in good agreement with crystallographic and electron microscopy data. However, in vitro assembled P22 portals were a mixture of 11- and 12-mer species in an approximate ratio of 2:1, respectively. A subsequent reference-free alignment of electron microscopy images of the P22 portal confirmed this mixture of oligomeric states. We conclude that macromolecular mass spectrometry is a valuable tool in structural biology that can aide in the determination of oligomeric states and symmetry of assemblies, providing a good starting point for improved image analysis of cryo-EM data.

Bacteriophages↗

Dynamic motions of free and bound O29 scaffolding protein identified by hydrogen deuterium exchange mass spectrometry.

In the double-stranded DNA containing bacteriophages, hundreds of copies of capsid protein subunits polymerize to form icosahedral shells, called procapsids, into which the viral genome is subsequently packaged to form infectious virions. High assembly fidelity requires the assistance of scaffolding protein molecules, which interact with the capsid proteins to insure proper geometrical incorporation of subunits into the growing icosahedral lattices. The interactions between the scaffolding and capsid proteins are transient and are subsequently disrupted during DNA packaging. Removal of scaffolding protein is achieved either by proteolysis or alternatively by some form of conformational switch that allows it to dissociate from the capsid. To identify the switch controlling scaffolding protein association and release, hydrogen deuterium exchange was applied to Bacillus subtilis phage Ø29 scaffolding protein gp7 in both free and procapsid-bound forms. The H/D exchange experiments revealed highly dynamic and cooperative opening motions of scaffolding molecules in the N-terminal helix-loop-helix (H-L-H) region. The motions can be promoted by destabilizing the hydrophobic contact between two helices. At low temperature where high energy motions were damped, or in a mutant in which the helices were tethered through the introduction of a disulfide bond, this region displayed restricted cooperative opening motions as demonstrated by a switch in the exchange kinetics from correlated EX1 exchange to uncorrelated EX2 exchange. The cooperative opening rate was increased in the procapsid-bound form, suggesting this region might interact with the capsid protein. Its dynamic nature might play a role in the assembly and release mechanism.

Bacillus Phages↗

Identification of subunit-subunit interactions in bacteriophage P22 procapsids by chemical cross-linking and mass spectrometry.

Viral capsids are dynamic structures which self-assemble and undergo a series of structural transformations to form infectious viruses. The dsDNA bacteriophage P22 is used as a model system to study the assembly and maturation of icosahedral dsDNA viruses. The P22 procapsid, which is the viral capsid precursor, is assembled from coat protein with the aid of scaffolding protein. Upon DNA packaging, the capsid lattice expands and becomes a stable virion. Chemical cross-linking analyzed by mass spectrometry was used to identify residue specific inter- and intra-subunit interactions in the P22 procapsids. All the intersubunit cross-links occurred between residues clustered in a loop region (residues 157-207) which was previously identified by mass spectrometry based on hydrogen/deuterium exchange and biochemical experiments. DSP and BS3 which have similar distance constraints (12 angstroms and 11.4 angstroms, respectively) cross-linked the same residues between two subunits in the procapsids (K183-K183), whereas DST, a shorter cross-linker, cross-linked lysine 175 in one subunit to lysine 183 in another subunit. The replacement of threonine with a cysteine at residue 182 immediately adjacent to the K183 cross-linking site resulted in slow spontaneous disulfide bond formation in the procapsids without perturbing capsid integrity, thus suggesting flexibility within the loop region and close proximity between neighboring loop regions. To build a detailed structure model, we have predicted the secondary structure elements of the P22 coat protein, and attempted to thread the prediction onto identified helical elements of cryoEM 3D reconstruction. In this model, the loop regions where chemical cross-linkings occurred correspond to the extra density (ED) regions which protrude upward from the outside of the capsids and face one another around the symmetry axes.

Amino Acid Substitution↗

Three-dimensional structure of the bacteriophage P22 tail machine.

The tail of the bacteriophage P22 is composed of multiple protein components and integrates various biological functions that are crucial to the assembly and infection of the phage. The three-dimensional structure of the P22 tail machine determined by electron cryo-microscopy and image reconstruction reveals how the five types of polypeptides present as 51 subunits are organized into this molecular machine through twelve-, six- and three-fold symmetry, and provides insights into molecular events during host cell attachment and phage DNA translocation.

Amino Acid Sequence↗

Domain study of bacteriophage p22 coat protein and characterization of the capsid lattice transformation by hydrogen/deuterium exchange.

Viral capsids are dynamic structures which undergo a series of structural transformations to form infectious viruses. The dsDNA bacteriophage P22 is used as a model system to study the assembly and maturation of icosahedral dsDNA viruses. The P22 procapsid, which is the viral capsid precursor, is assembled from coat protein with the aid of scaffolding protein. Upon DNA packaging, the capsid lattice expands and becomes a stable virion. Limited proteolysis and biochemical experiments indicated that the coat protein consists of two domains connected by a flexible loop. To investigate the properties and roles of the sub-domains, we have cloned them and initiated structure and function studies. The N-terminal domain, which is made up of 190 amino acid residues, is largely unstructured in solution, while the C-terminal domain, which consists of 239 amino acid residues, forms a stable non-covalent dimer. The N-terminal domain adopts additional structure in the context of the C-terminal domain which might form a platform on which the N-terminal domain can fold. The local dynamics of the coat protein in both procapsids and mature capsids was monitored by hydrogen/deuterium exchange combined with mass spectrometry. The exchange rate for C-terminal domain peptides was similar in both forms. However, the N-terminal domain was more flexible in the empty procapsid shells than in the mature capsids. The flexibility of the N-terminal domain observed in the solution persisted into the procapsid form, but was lost upon maturation. The loop region connecting the two domains exchanged rapidly in the empty procapsid shells, but more slowly in the mature capsids. The global stabilization of the N-terminal domain and the flexibility encoded in the loop region may be a key component of the maturation process.

Amino Acid Sequence↗

Investigation of N-terminal domain charged residues on the assembly and stability of HIV-1 CA.

The human immunodeficiency virus type 1 (HIV-1) capsid protein (CA) plays a crucial role in both assembly and maturation of the virion as well as viral infectivity. Previous in vivo experiments generated two N-terminal domain charge change mutants (E45A and E128A/R132A) that showed an increase in stability of the viral core. This increase in core stability resulted in decreased infectivity, suggesting the need for a delicate balance of favorable and unfavorable interactions to both allow assembly and facilitate uncoating following infection. Purified CA protein can be triggered to assemble into tubelike structures through the use of a high salt buffer system. The requirement for high salt suggests the need to overcome charge/charge repulsion between subunits. The mutations mentioned above lie within a highly charged region of the N-terminal domain of CA, away from any of the proposed protein/protein interaction sites. We constructed a number of charge mutants in this region (E45A, E45K, E128A, R132A, E128A/R132A, K131A, and K131E) and evaluated their effect on protein stability in addition to their effect on the rate of CA assembly. We find that the mutations alter the rate of assembly of CA without significantly changing the stability of the CA monomer. The changes in rate for the mutants studied are found to be due to varying degrees of electrostatic repulsion between the subunits of each mutant.

Capsid Proteins↗

Key interactions in HIV-1 maturation identified by hydrogen-deuterium exchange.

To characterize the intersubunit interactions underlying assembly and maturation in HIV-1, we determined the amide hydrogen exchange protection pattern of capsid protein in the immature virion and the mature virion using mass spectrometry. Alterations in protection upon maturation provide evidence for the maturation-induced formation of an interaction between the N- and C-terminal domains in half of the capsid molecules, indicating that only half of the capsid protein is assembled into the conical core.

Deuterium↗

High-sensitivity mass spectrometry for imaging subunit interactions: hydrogen/deuterium exchange.

In recent years, advances in mass spectrometry have provided unprecedented knowledge of protein expression within cells. It has become apparent that many proteins function as macromolecular complexes. Structural genomics programs are determining the fold of these proteins at an increasing rate and electron microscopic tomography potentially provides a means to determine the location of these complexes within the cell. A complete understanding of the molecular mechanism of these proteins requires detailed information on the interactions and dynamics within the complex. Recent advances in mass spectrometry now make it possible to use hydrogen/deuterium exchange to detect intersubunit interfaces and dynamics within supramolecular complexes.

Deuterium↗

Identification of novel interactions in HIV-1 capsid protein assembly by high-resolution mass spectrometry.

The pleomorphic nature of the immature and mature HIV-1 virions has made it difficult to characterize intersubunit interactions using traditional approaches. While the structures of isolated domains are known, the challenge is to identify intersubunit interactions and thereby pack these domains into supramolecular structures. Using high-resolution mass spectrometry, we have measured the amide hydrogen exchange protection factors for the soluble capsid protein (CA) and CA assembled in vitro. Comparison of the protection factors as well as chemical crosslinking experiments has led to a map of the subunit/subunit interfaces in the assembled tubes. This analysis provides direct biochemical evidence for the homotypic N domain and C domain interactions proposed from cryo-electron microscopy image reconstruction of CA tubes. Most significantly, we have identified a previously unrecognized intersubunit N domain-C domain interaction. The detection of this interaction reconciles previously discrepant biophysical and genetic data.

Amides↗

Coat protein fold and maturation transition of bacteriophage P22 seen at subnanometer resolutions.

Bacteriophage P22 is a prototypical biological machine used for studying protein complex assembly and capsid maturation. Using cryo-EM, we solved the structures of P22 before and after the capsid maturation at 8.5 A and 9.5 A resolutions, respectively. These structures allowed visualization of alpha-helices and beta-sheets from which the capsid protein fold is derived. The capsid fold is similar to that of the coat protein of HK97 bacteriophage. The cryo-EM shows that a large conformational change of the P22 capsid during maturation transition involves not only the domain movement of individual subunits, but also refolding of the capsid protein.

Bacteriophage P22↗

Mapping of protein:protein contact surfaces by hydrogen/deuterium exchange, followed by on-line high-performance liquid chromatography-electrospray ionization Fourier-transform ion-cyclotron-resonance mass analysis.

For protein complexes too large, uncrystallizable/insoluble, or low concentration for conventional X-ray diffraction or nuclear magnetic resonance analysis, the contact surface(s) may be mapped by comparing H/2H exchange rate (and thus solvent accessibility) of backbone amide hydrogens in free vs. complexed protein(s). The protein is first exposed to 2H2O, allowed to exchange for each of several reaction periods, and then digested with pepsin. The extent and rate of H/2H exchange is determined by measuring the increase in mass with H/2H exchange period for each of the peptides. Here, we present an experimental protocol that combines rapid (to minimize back-exchange) HPLC front-end separation with ultrahigh-resolution mass analysis (needed to distinguish the isotopic distributions of dozens of peptides simultaneously). The method is used to study the assembled human immunodeficiency virus type capsid protein (CA) and its soluble form.

Amino Acid Sequence↗

DNA packaging: a new class of molecular motors.

DNA is packaged into preformed bacteriophage capsids to liquid crystalline density by the action of a portal protein complex. Single molecule packaging studies indicate that this is a new and extremely powerful class of molecular motors.

Capsid↗

Bacteriophage p22 portal vertex formation in vivo.

Bacteriophage with double-stranded, linear DNA genomes package DNA into pre-assembled icosahedral procapsids through a unique vertex. The packaging vertex contains an oligomeric ring of a portal protein that serves as a recognition site for the packaging enzymes, a conduit for DNA translocation, and the site of tail attachment. Previous studies have suggested that the portal protein of bacteriophage P22 is not essential for shell assembly; however, when assembled in the absence of functional portal protein, the assembled heads are not active in vitro packaging assays. In terms of head assembly, this raises an interesting question: how are portal vertices defined during morphogenesis if their incorporation is not a requirement for head assembly? To address this, the P22 portal gene was cloned into an inducible expression vector and transformed into the P22 host Salmonella typhimurium to allow control of the dosage of portal protein during infections. Using pulse-chase radiolabeling, it was determined that the portal protein is recruited into virion during head assembly. Surprisingly, over-expression of the portal protein during wild-type P22 infection caused a dramatic reduction in the yield of infectious virus. The cause of this reduction was traced to two potentially related phenomena. First, excess portal protein caused aberrant head assembly resulting in the formation of T=7 procapsid-like particles (PLPs) with twice the normal amount of portal protein. Second, maturation of the PLPs was blocked during DNA packaging resulting in the accumulation of empty PLPs within the host. In addition to PLPs with normal morphology, smaller heads (apparently T=4) and aberrant spirals were also produced. Interestingly, maturation of the small heads was relatively efficient resulting in the formation of small mature particles that were tailed and contained a head full of DNA. These data suggest that incorporation of portal vertices into heads occurs during growth of the coat lattice at decision points that dictate head assembly fidelity.

Bacteriophage P22↗

Preliminary crystallographic analysis of the bacteriophage P22 portal protein.

Portal proteins are components of large oligomeric dsDNA pumps connecting the icosahedral capsid of tailed bacteriophages to the tail. Prior to the tail attachment, dsDNA is actively pumped through a central cavity formed by the subunits. We have studied the portal protein of bacteriophage P22, which is the largest connector characterized among the tailed bacteriophages. The molecular weight of the monomer is 82.7 kDa, and it spontaneously assembles into an oligomeric structure of approximately 1.0 MDa. Here we present a preliminary biochemical and crystallographic characterization of this large macromolecular complex. The main difficulties related to the crystallization of P22 portal protein lay in the intrinsic dynamic nature of the portal oligomer. Recombinant connectors assembled from portal monomers expressed in Escherichia coli form rings of different stoichiometry in solution, which cannot be separated on the basis of their size. To overcome this intrinsic heterogeneity we devised a biochemical purification that separates different ring populations on the basis of their charge. Small ordered crystals were grown from drops containing a high concentration of the kosmotropic agent tert-butanol and used for data collection. A preliminary crystallographic analysis to 7.0-A resolution revealed that the P22 portal protein crystallized in space group I4 with unit cell dimensions a=b=409.4A, c=260.4A. This unit cell contains a total of eight connectors. Analysis of the noncrystallographic symmetry by the self-rotation function unambiguously confirmed that bacteriophage P22 portal protein is a dodecamer with a periodicity of 30 degrees. The cryo-EM reconstruction of the dodecahedral bacteriophage T3 portal protein will be used as a model to initiate phase extension and structure determination.

Bacteriophage P22↗