PubMed Health⌕ Search

Biomedical subjects

Peter Grathwohl

Publications and source records attributed to Peter Grathwohl.

4 recordsLinked to original sources

Quantification of mass fluxes and natural attenuation rates at an industrial site with a limited monitoring network: a case study.

At many "real world" field sites, the number of available monitoring wells is limited due to economic or geological reasons. Under such restricted conditions, it is difficult to perform a reliable field investigation and to quantify primary lines of evidence for natural attenuation (NA), like the documentation of a decrease of contaminant mass flux in flow direction. This study reports the results of a groundwater investigation at a former manufactured gas plant situated in a Quaternary river valley in southwest Germany. The location, infrastructure and aquifer setting are typical of many industrial sites in Germany. Due to difficult drilling conditions (coarse glaciofluvial gravel deposits and an anthropogenic fill above the aquifer), only 12 monitoring wells were available for the investigation and localisation of the contaminant plume. These wells were situated along three control planes (CP) downgradient from the contaminant source, with four wells along each plane. Based on the sparse set of monitoring wells, field scale mass fluxes and first-order natural attenuation rate constants of benzene, toluene, ethylbenzene, and o-xylene and p-xylene (BTEX) and low molecular weight polycyclic aromatic hydrocarbons (PAH) were estimated utilizing different point scale and also a new integral investigation method. The results show that even at a heterogeneous site with a sparse monitoring network point scale investigation methods can provide reliable information on field scale natural attenuation rates, if a dependable flow model or tracer test data is available. If this information is not available, only the new integral investigation method presented can yield adequate results for the quantification of contaminant mass fluxes under sparse monitoring conditions.

Environmental Monitoring↗

Solubility-normalized combined adsorption-partitioning sorption isotherms for organic pollutants.

Equilibrium sorption isotherms were measured for five different low-polarity organic compounds (benzene, trichloroethene, 1,2- and 1,4-dichlorobenzene, and phenanthrene) over a wide concentration range. The investigated sorbents can be grouped into the following three classes: (1) humic soil organic matter, which shows linear sorption isotherms (solely partitioning, as observed in the peat sample); (2) carbon materials, which were thermally altered (due to their natural history or industrial production) and thus contain a high specific surface area and exhibit nonlinear isotherms, and (3) pure engineered microporous materials (e.g., zeolites and activated carbon), where adsorption is solely due to a pore-filling process. Sorption of all compounds was fitted very well by the Polanyi-Dubinin-Manes (PDM) model, which for sorbents containing humic organic matter (e.g., peat) was combined with linear partitioning. Both the partitioning and the Polanyi-Dubinin-Manes model predict unique sorption isotherms of similar compounds if the solubility-normalized aqueous concentration is used. In addition, an inverse linear relationship between the distribution coefficient (Kd) and water solubility, which was very well confirmed by the data, is obtained. This also leads to unit-equivalent Freundlich sorption isotherms and explains the often observed apparent correlation between sorption capacity at a given concentration (e.g., Freundlich coefficient) and sorption nonlinearity (Freundlich exponent).

Adsorption↗

Time scales of organic contaminant dissolution from complex source zones: coal tar pools vs. blobs.

Groundwater contamination due to complex organic mixtures such as coal tar, creosote and fuels is a widespread problem in industrialized regions. Although most compounds in these mixtures are biodegradable, the contaminant sources are very persistent for many decades after the contamination occurred (e.g., more than 100 years ago at gasworks sites). This limited bioavailability is due to slow dissolution processes. This study presents results from a large scale tank experiment (8 m long) on the long-term (354 days) dissolution kinetics of BTEX and PAHs from a 2.5 m long coal tar pool and 0.5 m long (smear) zone containing coal tar blobs distributed in a coarse sand. The results inidicate (1) that Raoult's law holds for estimation of the saturation aqueous concentrations of the coal tar constituents, (2) that for the dissolution of smear zones longer than approximately 0.1 m and with more than 3-5% residual saturation, the local equilibrium assumption is valid and (3) that although very small (< 0.1 mm), the transverse vertical dispersivity dominates the pool dissolution processes. Typical time scales for removal of the pollutants from the blob zone and the pool are in the order of a few weeks to more than 10,000 years, respectively.

Coal Tar↗