Biomedical subjects
Publications and source records attributed to Peter H M Budzelaar.
The diiminepyridine ligand, made famous by Brookhart and Gibson a decade ago through its use in the first iron-containing olefin polymerization catalyst, also displays an amazing variety of ligand-centred reactions, including electron transfer, alkylation, dimerization and deprotonation. The present Perspective summarizes these reactions and also speculates on the links between ligand- and metal-centred reactivity.
Explore the source record for details and available documents.
beta-Hydrogen transfer (BHT) to monomer is the dominant chain termination pathway for olefin polymerization promoted by group 4 metal catalysts. The transition state (TSA) for BHT studied in earlier work is characterized by a strong metal-hydrogen interaction. Our theoretical study of a series of homogeneous single-site polymerization catalysts reveals the existence of a second transition state (TSC), competitive with TSA, which has no direct metal-hydrogen interaction and strongly resembles that for the main-group metal aluminum. The balance between the two reaction paths is sensitive to choice of metal and ligand structure.
The reaction of the {2,6-[2,6-(iPr)2PhN=C(CH3)]2(C5H3N)}FeCl2 catalyst precursor with R3Al [R = Me, Et] afforded {2,6-[2,6-(iPr)2PhN=C(CH3)]2(C5H3N)}AlMe2 (1) and [eta4-LAl2Et3(mu-Cl)]Fe-(eta6-C7H8) (2), respectively. These paramagnetic species arises from both transmetalation, during which the strong terdentate ligand loses the Fe center, and reduction. The extent of reduction depends on the nature of the Al alkylating agent. The electrons necessary for the reduction are likely to be provided by cleavage of Fe-C bond of transient low-valent organo-Fe species.
The ionic metallocene complexes [Cp*(2)M][BPh(4)] (Cp* = C(5)Me(5)) of the trivalent 3d metals Sc, Ti, and V were synthesized and structurally characterized. For M = Sc, the anion interacts weakly with the metal center through one of the phenyl groups, but for M = Ti and V, the cations are naked. They each contain one strongly distorted Cp* ligand, with one (V) or two (Ti) agostic C-H...M interactions involving the Cp*Me groups. For Sc and Ti, these Lewis acidic species react with fluorobenzene and 1,2-difluorobenzene to yield [Cp*(2)M(kappaF-FC(6)H(5))(n)][BPh(4)] (M = Sc, n = 2; M = Ti, n = 1) and [Cp*(2)M(kappa(2)F-1,2-F(2)C(6)H(4))][BPh(4)], the first examples of kappaF-fluorobenzene and kappa(2)F-1,2-difluorobenzene adducts of transition metals. With the perfluorinated anion [B(C(6)F(5))(4)](-), both Sc and Ti form [Cp*(2)M(kappa(2)F-C(6)F(5))B(C(6)F(5))(3)] contact ion pairs. The nature of the metal-fluoroarene interaction was studied by density functional theory (DFT) calculations and by comparison with the corresponding tetrahydrofuran (THF) adducts and was found to be predominantly electrostatic for all metals studied.
The alkylation of the Brookhart-Gibson {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2(C5H3N)} FeCl2 precatalyst with 2 equiv of LiCH2Si(CH3)3 led to the isolation of several catalytically very active products depending on the reaction conditions. The expected dialkylated species {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2}(C5H3N)Fe(CH2SiMe3)2 (2) was indeed the major component of the reaction mixture. However, other species in which alkylation occurred at the pyridine ring ortho position, {2,6-[2,6-(i-Pr)2PhN=C(CH3)]2-2-CH2SiMe3}(C5H3N)Fe(CH2SiMe3) (1), and at the imine C atom, {2-[2,6-(i-Pr)2PhN=C(CH3)]-6-[2,6-(i-Pr)2PhNC(CH3)(CH2 SiMe3)](C5H3N)}Fe(CH2SiMe3) (3), have also been isolated and fully characterized. In addition, deprotonation of the methyl-imino functions and formation of a new divalent Fe catalyst {[2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}Fe(mu-Cl)Li(THF)3 (4) also occurred depending on the reaction conditions. In turn, the formation of 4 might trigger the reductive coupling of two units through the methyl-carbon wings. This process resulted in the one-electron reduction of the metal center, affording a dinuclear Fe(I) alkyl catalyst {[{[2,6-(i-Pr)2C6H5]N=C(CH3)}(C5H3N){[2,6-(i-Pr)26H5]N=CCH2}Fe(CH2SiMe3)]}2 (5). Different from other metal derivatives, complex 5 could not be prepared from the monodeprotonated version of the ligand. Its reaction with a mixture of FeCl2 and RLi afforded instead [{2,6-[2,6-(i-Pr)2PhN-C=(CH2)]2(C5H3N)}FeCH2Si(CH3)3][Li(THF)4] (6) which is also catalytically active. All of these high-spin species have been shown to have high catalytic activity for olefin polymerization, producing polymers of two distinct natures, depending on the formal oxidation state of the metal center.
Reduction of the two trivalent 2,6-{[2,6-(i-Pr)2C6H5]N=C(CH3)}2(C5H3N)VCl3 and {[2,6-{[2,6-(i-Pr)2C6H3]N-C=(CH2)}2(C5H3N)]VCl(THF) complexes with excess NaH afforded two corresponding end-on dinitrogen-bridged complexes [2,6-{[2,6-(i-Pr)2C6H5]N=C(CH3)}2(C5H3N)V]2(m-N2).(hexane) (1) and [{[2,6-{[2,6-(i-Pr)2C6H3]N-C=(CH2)}2(C5H3N)]V]2(m-N2).(hexane) (3). Despite their very close structural similarity, the two species have completely different natures. The first is paramagnetic and may be regarded as generated by the two-electron attack of two formally zerovalent vanadium moieties on the same N2 unit. In the nearly diamagnetic 3 instead, the N2 unit has been reduced by two vanadium atoms, formally divalent. Structural analysis and DFT calculations have indicated that partial reduction of the bridging nitrogen occurred for both complexes while, in the case of 1, substantial metal-to-ligand electron transfer also occurs.
An unprecedented Nd[2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N=C(CH(3))](2)(C(5)H(3)N)]NdI(2)(THF) (1) complex was prepared by oxidizing metallic Nd with I(2) in THF and in the presence of 2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N=C(CH(3))](2)(C(5)H(3)N). The magnetic behavior at variable T clearly indicated that the complex should be regarded as a trivalent Nd atom antiferromagnetically coupled to a radical anion. By using the doubly deprotonated form of the diimino pyridine ligand [[2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N-C=CH(2)](2)(C(5)H(3)N)](2-) (2) the corresponding trivalent complexes [[2,6-[[2,6-(i-Pr)(2)C(6)H(5)]N-C=CH(2)](2)(C(5)H(3)N)]Ln (THF)](mu-Cl)(2)[Li(THF)(2)].0.5 (hexane) [Ln = Nd (3), La (4)] were obtained and characterized. Reduction of these species afforded electron transfer to the ligand system which gave ligand dimerization via C-C bond formation through one of the two ene-amido functions of each molecule. The resulting dinuclear [[([2,6-(i-Pr)(2)C(6)H(5)]N-C=(CH(2)))(C(5)H(3)N)([2,6-(i-Pr)(2)C(6)H(5)]N=CCH(2))]Ln(THF)(2)(mu-Cl)[Li(THF)(3)])(2).2(THF) [Ln = Nd (5), La (6)] were isolated and characterized.
Oxygenation of C-H and C=C bonds of hydrocarbons with H2O2 and O2 is an important industrial method to convert mineral oil into useful chemicals. Despite their enormous economic impact, these reactions are still not fully understood. In the early 1970s, the potential of Rh and Ir complexes for olefin oxygenation was investigated intensively. Simple inorganic salts of these metals proved to be rather useless for industrial application when compared with the traditional Wacker system. However, the appropriate choice of ligands allows the stepwise oxidation of olefins at Rh and Ir. These systems are therefore useful to study mechanistic details of substrate binding and C-O bond formation at the catalytic metal center. Insight from these model studies helps in understanding the catalytic reactions at these (and possibly other) metal centers. Further insight into the differences between the Rh system and traditional Wacker-type oxidation at Pd may lead to useful applications.
Explore the source record for details and available documents.
The reaction of [[2,6-(i-Pr)(2)PhN=C(Me)](2)(C(5)H(3)N)]MnCl(2) with alkylating agents formed a dinuclear Mn(I) derivative via ligand reductive coupling. In the case of the trivalent Cr analogue, a similar reaction afforded reduction toward Cr(II) but also alkylation at the pyridine ring para position followed by an unprecedented cycloaddition that generated a tricyclic system.
The reaction of 14e [L(Me)Rh(coe)] (1; L(Me)[double bond]ArNC(Me)CHC(Me)NAr, Ar[double bond]2,6-Me(2)C(6)H(3); coe[double bond]cis-cyclooctene) with phenyl halides and thiophenes was studied to assess the competition between sigma coordination, arene pi coordination and oxidative addition of a C-X bond. Whereas oxidative addition of the C-Cl and C-Br bonds of chlorobenzene and bromobenzene to L(Me)Rh results in the dinuclear species [[L(Me)Rh(Ph)(micro-X)](2)] (X=Cl, Br), fluorobenzene yields the dinuclear inverse sandwich complex [[L(Me)Rh](2)(anti-micro-eta(4):eta(4)-PhF)]. Thiophene undergoes oxidative addition of the C-S bond to give a dinuclear product. The reaction of 1 with dibenzo[b,d]thiophene (dbt) in the ratio 1:2 resulted in the formation of the sigma complex [L(Me)Rh(eta(1)-(S)-dbt)(2)], which in solution dissociates into free dbt and a mixture of the mononuclear complex [L(Me)Rh(eta(4)-(1,2,3,4)-dbt)] and the dinuclear complex [[L(Me)Rh](2)(micro-eta(4)-(1,2,3,4):eta(4)-(6,7,8,9)-dbt)]. The latter could be obtained selectively by the 2:1 reaction of 1 and dbt. Reaction of 1 with diethyl sulfide produces [L(Me)Rh(Et(2)S)(2)], which in the presence of hydrogen loses a diethyl sulfide ligand to give [L(Me)Rh(Et(2)S)(H(2))] and catalyses the hydrogenation of cyclooctene.
[RhI(t-Bu2-boxate)(C2H4)2] spontaneously disproportionates to the mononuclear [RhII(t-Bu2-boxate)2], whereas [RhI(Ph2-boxate)(C2H4)2] is stable against disproportionation.