PubMed Health⌕ Search

Biomedical subjects

Peter Legzdins

Publications and source records attributed to Peter Legzdins.

16 recordsLinked to original sources
PubMed2006

Concurrent N-H and alpha-C-H bond activations of pyrrolidine and piperidine under ambient conditions by 18e tungsten allyl nitrosyl complexes.

18e Cp*W(NO)(CH2CMe3)(eta3-allyl) complexes effect concurrent N-H and alpha-C-H bond activations of cyclic, saturated amines under mild conditions, the conversions involving pyrrolidine being shown. In a similar manner, treatment of Cp*W(NO)(CH2CMe3)(eta3-3,3-Me2C3H3) with piperidine at room temperature results in the clean formation of the alkyl amido complex, Cp*W(NO)(CH2CMe3)(NC5H9CMe2CHCH2).

Journal Article↗
PubMed2006

Intramolecular C-H activation reactions of molybdenacyclobutanes.

Molybdenacyclobutane complexes can be prepared by reaction of Cp*Mo(NO)(=CHCMe3) (formed spontaneously by loss of neopentane from Cp*Mo(NO)(CH2CMe3)2 (1) under ambient conditions) with cyclic olefins, including cyclopentene, cycloheptene, and cyclooctene. The cyclopentene metallacyclobutane orients the metallacycle bridgehead protons cis to each other. A trans arrangement is observed for the cyclooctene congener, and both cis and trans orientations occur for the cycloheptene species. The reaction of 1 with cyclohexene initially forms a metallacyclobutane that then undergoes an allylic C-H activation to form an allyl-alkyl-coupled product with the concomitant loss of H2. The analogous allyl-alkyl structure is also observed as the thermodynamic product for the reactions of cycloheptene and cyclooctene with 1. The cyclooctene allyl-alkyl compound (5C) can be converted to an eta2-diene complex by heating with pyridine. Alternatively, heating of 5C in the presence of a variety of olefins displaces the diene ligand that can then be isolated in its unbound state.

Journal Article↗
PubMed2005

Parallel transformations of cyclohexene mediated by the Cp*W(NO) fragment.

Hydrogenolysis of Cp*W(NO)(CH2CMe3)2 at room temperature in cyclohexene results in the formation of the intermediate 16e organometallic complex, [Cp*W(NO)(eta2-cyclohexene)]. This intermediate leads to three parallel transformations of cyclohexene, namely (a) C-H activation of cyclohexene to form an eta3-cyclohexenyl hydrido complex, (b) combination of cyclohexene and H2 to form a cyclohexyl hydrido complex, and (c) coupling of two molecules of cyclohexene with concomitant loss of two hydrogen atoms to form a complex containing a novel eta1,eta3-(cyclohexyl)cyclohexenyl ligand. Single-crystal X-ray crystallographic analyses of products resulting from transformations (b) and (c) have been effected.

Journal Article↗
PubMed2004

New details concerning the reactions of nitric oxide with vanadium tetrachloride.

The slow addition of NO to a CCl(4) solution of VCl(4) reproducibly forms the known polymer [V(NO)(3)Cl(2)](n)() as a dark brown powder. Treatment of a CH(2)Cl(2) suspension of [V(NO)(3)Cl(2)](n)() with excess THF generates mer-(THF)(3)V(NO)Cl(2) (1) which can be isolated as an orange crystalline material in 55% yield. The reaction of 1 with excess MeCN or 1 equiv of trimpsi (trimpsi = (t)BuSi(CH(2)PMe(2))(3)) provides yellow-orange (MeCN)(3)V(NO)Cl(2)xMeCN (2xMeCN) and yellow (trimpsi)V(NO)Cl(2) (3), respectively. A black, crystalline complex formulated as [NO][VCl(5)] (4) is formed by the slow addition of NO to neat VCl(4) or by the reaction of excess ClNO with neat VCl(4). Complex 4 is extremely air- and moisture-sensitive, and IR spectroscopy suggests that in solutions and in the gas phase it dissociates back into VCl(4) and ClNO. Reaction of 4 with excess [NEt(3)(CH(2)Ph)]Cl generates [NEt(3)(CH(2)Ph)](2)[VCl(6)]x2CH(2)Cl(2) (5x2CH(2)Cl(2)), which can be isolated as deep-red crystals in 51% yield. All new complexes have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 1, 2xMeCN, and 5x2CH(2)Cl(2) have been established by single-crystal X-ray diffraction analyses.

Journal Article↗
PubMed2003

Thermal activation of hydrocarbon C-H bonds initiated by a tungsten allyl complex.

Gentle thermolysis of the allyl complex, CpW(NO)(CH(2)CMe(3))(eta(3)-H(2)CCHCMe(2)) (1), at 50 degrees C in neat hydrocarbon solutions results in the loss of neopentane and the generation of transient intermediates that subsequently activate solvent C-H bonds. Thus, thermal reactions of 1 with tetramethylsilane, mesitylene, and benzene effect single C-H activations and lead to the exclusive formation of CpW(NO)(CH(2)SiMe(3))(eta(3)-H(2)CCHCMe(2)) (2), CpW(NO)(CH(2)C(6)H(3)-3,5-Me(2))(eta(3)-H(2)CCHCMe(2)) (3), and CpW(NO)(C(6)H(5))(eta(3)-H(2)CCHCMe(2)) (4), respectively. The products of reactions of 1 with other methyl-substituted arenes indicate an inherent preference of the system for the activation of stronger arene sp(2) C-H bonds. For example, C-H bond activation of p-xylene leads to the formation of CpW(NO)(CH(2)C(6)H(4)-4-Me)(eta(3)-H(2)CCHCMe(2)) (5) (26%) and CpW(NO)(C(6)H(3)-2,5-Me(2))(eta(3)-H(2)CCHCMe(2)) (6) (74%). Mechanistic and labeling studies indicate that the transient C-H-activating intermediates are the allene complex, CpW(NO)(eta(2)-H(2)C=C=CMe(2)) (A), and the eta(2)-diene complex, CpW(NO)(eta(2)-H(2)C=CHC(Me)=CH(2)) (B). Intermediates A and B react with cyclohexene to form CpW(NO)(eta(3)-CH(2)C(2-cyclohexenyl)CMe(2))(H) (18) and CpW(NO)(eta(3)-CH(2)CHC)(Me)CH(2)C(beta)H(C(4)H(8))C(alpha)H (19), respectively, and intermediate A can be isolated as its PMe(3) adduct, CpW(NO)(PMe(3))(eta(2)-H(2)C=C=CMe(2)) (20). Interestingly, thermal reaction of 1 with 2,3-dimethylbut-2-ene results in the formation of a species that undergoes eta(3) --> eta(1) isomerization of the dimethylallyl ligand following the initial C-H bond-activating step to yield CpW(NO)(eta(3)-CMe(2)CMeCH(2))(eta(1)-CH(2)CHCMe(2)) (21). Thermolyses of 1 in alkane solvents afford allyl hydride complexes resulting from three successive C-H bond-activation reactions. For instance, 1 in cyclohexane converts to CpW(NO)(eta(3)-C(6)H(9))(H) (22) with dimethylpropylcyclohexane being formed as a byproduct, and in methylcyclohexane it forms the two isomeric complexes, CpW(NO)(eta(3)-C(7)H(11))(H) (23a,b). All new complexes have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 2, 3, 4, 18, 19, 20, and 21 have been established by X-ray crystallographic analyses.

Journal Article↗
PubMed2003

Toward binary nitrosyls: distinctly bent Fe[bond]N[bond]O linkages in base-stabilized Fe(NO)3+ complexes.

Air- and moisture-sensitive Fe(NO)(3)(eta(1)-PF(6)) (1) may be conveniently prepared by treating Fe(NO)(3)Cl with 1 equiv of [Ag][PF(6)] in CH(2)Cl(2) or by reacting [NO][PF(6)] with excess iron filings in MeNO(2). Complex 1 is thermally sensitive both as a solid and in solutions, and is best handled below -20 degrees C. To isolate 1 reproducibly from MeNO(2) solutions it is necessary to remove all traces of propionitrile, which often occurs as an impurity in MeNO(2), because it reacts with Lewis-acidic 1 to form [Fe(NO)(3)(EtCN)][PF(6)] (2). If trace H(2)O is present during the synthesis of 1, some of the PF(6)(-) is converted to PO(2)F(2)(-), which is sufficiently Lewis basic that it captures two Fe(NO)(3)(+) fragments and forms [(ON)(3)Fe(mu-PO(2)F(2))Fe(NO)(3)][PF(6)] (3). Finally, Fe(NO)(3)(eta(1)-BF(4)) (4) can be obtained as a green microcrystalline powder by employing the same synthetic methodologies used to prepare 1. The new complexes 1-4 have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 2, 3, and 4 and their parent compound, Fe(NO)(3)Cl, have been established by X-ray diffraction methods. The iron centers in the Fe(NO)(3) fragments in all these structures exhibit approximately tetrahedral coordination geometries, and the Fe-N-O linkages are distinctly nonlinear with bond angles in the range of 159 to 169 degrees. DFT calculations on Fe(NO)(3)(eta(1)-BF(4)) (4) confirm that its bent Fe-N-O links have an electronic origin and need not be attributed to other factors, such as packing forces in the crystal. Interestingly, the bending of the NO ligands results in an increase in the energy of the HOMO, relative to the linear case, but at the same time causes a decrease in energy of the HOMO-1 and the HOMO-2 molecular orbitals. This more than compensates for the higher energy of the HOMO, resulting in a lower energy structure.

Journal Article↗
PubMed2003

Intermolecular activation of hydrocarbon C-H bonds under ambient conditions by 16-electron neopentylidene and benzyne complexes of molybdenum.

CpMo(NO)(CH(2)CMe(3))(2) (1), a complex with alpha-agostic C-H.Mo interactions, evolves neopentane in neat hydrocarbon solutions at room temperature and forms the transient 16-electron alkylidene complex, CpMo(NO)(=CHCMe(3)), which subsequently activates solvent C-H bonds. Thus, it reacts with tetramethylsilane or mesitylene to form CpMo(NO)(CH(2)CMe(3))(CH(2)SiMe(3)) (2) or CpMo(NO)(CH(2)CMe(3))(eta(2)-CH(2)C(6)H(3)-3,5-Me(2)) (3), respectively, in nearly quantitative yields. Under identical conditions, 1 in p-xylene generates a mixture of sp(2) and sp(3) C-H bond activation products, namely CpMo(NO)(CH(2)CMe(3))(C(6)H(3)-2,5-Me(2)) (4, 73%) and CpMo(NO)(CH(2)CMe(3))(eta(2)-CH(2)C(6)H(4)-4-Me) (5, 27%). In benzene at room temperature, 1 transforms to a mixture of CpMo(NO)(CH(2)CMe(3))(C(6)H(5)) (6) and CpMo(NO)(C(6)H(5))(2) (7) in a sequential manner. Most interestingly, the thermal activation of 6 at ambient temperatures gives rise to two parallel modes of reactivity involving either the elimination of benzene and formation of CpMo(NO)(=CHCMe(3)) or the elimination of neopentane and formation of the benzyne complex, CpMo(NO)(eta(2)-C(6)H(4)). In pyridine, these intermediates are trapped as the isolable 18-electron adducts, CpMo(NO)(=CHCMe(3))(NC(5)H(5)) (8) and CpMo(NO)(eta(2)-C(6)H(4))(NC(5)H(5)) (9), and, in hydrocarbon solvents, they effect the intermolecular activation of aliphatic C-H bonds at room temperature to generate mixtures of neopentyl- and phenyl-containing derivatives. However, the distribution of products resulting from the hydrocarbon activations is dependent on the nature of the solvent, probably due to solvation effects and the presence of sigma- or pi-hydrocarbon complexes on the reaction coordinates of the alkylidene and the benzyne intermediates. The results of DFT calculations on these processes in the gas phase support the existence of such hydrocarbon complexes and indicate that better agreement with experimental observations is obtained when the actual neopentyl ligand rather than the simpler methyl ligand is used in the model complexes.

Journal Article↗
PubMed2003

Thermal activation of hydrocarbon C-H bonds by Cp*M(NO) complexes of molybdenum and tungsten.

Gentle thermolysis of appropriate CpM(NO)(hydrocarbyl)(2) complexes (Cp = eta(5)-C(5)Me(5)) of molybdenum and tungsten results in loss of hydrocarbon and the transient formation of 16-electron CpM(NO)-containing complexes such as CpM(NO)(alkylidene), CpM(NO)(eta(2)-benzyne), CpM(NO)(eta(2)-acetylene), and CpM(NO)(eta(2)-allene) (M = Mo, W). These intermediates effect the single, double, or triple activation of hydrocarbon C-H bonds intermolecularly, the first step of these activations being the reverse of the transformations by which they were generated. This Account summarizes the various types of C-H activations that have been effected with these nitrosyl complexes and also describes the results of kinetic, mechanistic, and theoretical investigations of these processes.

Journal Article↗
PubMed2002

Differing reactivities of (trimpsi)M(CO)(2)(NO) complexes [M = V, Nb, Ta; trimpsi = (t)BuSi(CH(2)PMe(2))(3)] with halogens and halogen sources.

Treatment of (trimpsi)V(CO)(2)(NO) (trimpsi = (t)BuSi(CH(2)PMe(2))(3)) with 1 equiv of PhICl(2) or C(2)Cl(6) or 2 equiv of AgCl affords (trimpsi)V(NO)Cl(2) (1) in moderate yields. Likewise, (trimpsi)V(NO)Br(2) (2) and (trimpsi)V(NO)I(2) (3) are formed by the reactions of (trimpsi)V(CO)(2)(NO) with Br(2) and I(2), respectively. The complexes (trimpsi)M(NO)I(2)(PMe(3)) (M = Nb, 4; Ta, 5) can be isolated in moderate to low yields when the (trimpsi)M(CO)(2)(NO) compounds are sequentially treated with 1 equiv of I(2) and excess PMe(3). The reaction of (trimpsi)V(CO)(2)(NO) with 2 equiv of ClNO forms 1 in low yield, but the reactions of (trimpsi)M(CO)(2)(NO) (M = Nb, Ta) with 1 equiv of ClNO generate (trimpsi)M(NO)(2)Cl (M = Nb, 6; Ta, 7). Complexes 6 and 7 are thermally unstable and decompose quickly at room temperature; consequently, they have been characterized solely by IR and (31)P[(1)H] NMR spectroscopies. All other new complexes have been fully characterized by standard methods, and the solid-state molecular structures of 1.3CH(2)Cl(2), 4.(3/4)CH(2)Cl(2), and 5.THF have been established by single-crystal X-ray diffraction analyses. A convenient method of generating Cl(15)NO has also been developed during the course of these investigations.

Journal Article↗
PubMed2002

Parallel modes of C-H bond activation initiated by CpMo(NO)(CH2CMe3)(C6H5) at ambient temperatures.

The molybdenum nitrosyl complex Cp*Mo(NO)(CH2CMe3)(C6H5) reacts at room temperature via elimination of neopentane or benzene to form the transient species Cp*Mo(NO)(=CHCMe3) and Cp*Mo(NO)(eta2-C6H4). These reactive intermediates effect the intermolecular activation of hydrocarbon C-H bonds via the reverse of the transformations by which they are generated. Thermolysis of Cp*Mo(NO)(CH2CMe3)(C6H5) in pyridine yields the adducts Cp*Mo(NO)(=CHCMe3)(NC5H5) and Cp*Mo(NO)(eta2-C6H4)(NC5H5), and the benzyne complex has been characterized by X-ray diffraction.

Journal Article↗
PubMed2002

Unusual thermal C-h bond activation by a tungsten allene complex.

Gentle thermolysis of the 18e alkyl-allyl complex, CpW(NO)(CH(2)CMe(3))(eta(3)-3,3-Me(2)C(3)H(3)) (1), generates a reactive 16e allene intermediate, CpW(NO)(eta(2)-CH(2)=C=CMe(2)) (A), with the concomitant evolution of neopentane via hydrogen abstraction from the dimethylallyl ligand. A has been structurally characterized as its PMe(3) adduct and is capable of effecting single and multiple C-H bond activations of hydrocarbon solvents. For example, the thermal reaction of 1 with cyclohexane leads to the formation of the 18e cyclohexenyl hydrido complex, CpW(NO)(eta(3)-C(6)H(9))(H) (5), as a result of three successive C-H activations of the alkane solvent.

Journal Article↗
PubMed2002

Synthesis, characterization, and solution redox properties of (trimpsi)M(CO)(2)(NO) complexes [M = V, Nb, Ta; trimpsi = (t)BuSi(CH(2)PMe(2))(3)].

Treatment of [Et(4)N][M(CO)(6)] (M = Nb, Ta) with I(2) in DME at -78 degrees C produces solutions of the bimetallic anions [M(2micro-I)(3)(CO)(8)](-). Addition of the tripodal phosphine (t)BuSi(CH(2)PMe(2))(3) (trimpsi) followed by refluxing affords (trimpsi)M(CO)(3)I [M = Nb (1), Ta (2)], which are isolable in good yields as air-stable, orange-red microcrystalline solids. Reduction of these complexes with 2 equiv of Na/Hg, followed by treatment with Diazald in THF, results in the formation of (trimpsi)M(CO)(2)(NO) [M = Nb (3), Ta (4)] in high isolated yields. The congeneric vanadium complex, (trimpsi)V(CO)(2)(NO) (5), can be prepared by reacting [Et(4)N][V(CO)(6)] with [NO][BF(4)] in CH(2)Cl(2) to form V(CO)(5)(NO). These solutions are treated with 1 equiv of trimpsi to obtain (eta(2)-trimpsi)V(CO)(3)(NO). Refluxing orange THF solutions of this material affords 5 in moderate yields. Reaction of (trimpsi)VCl(3)(THF) (6) with 4 equiv of sodium naphthalenide in THF in the presence of excess CO provides [Et(4)N][(trimpsi)V(CO)(3)] (7), (trimpsi)V(CO)(3)H, and [(trimpsi)V(micro-Cl)(3)V(trimpsi)][(eta(2)-trimpsi)V(CO)(4)].3THF ([8][9].3THF). All new complexes have been characterized by conventional spectroscopic methods, and the solid-state molecular structures of 2.(1)/(2)THF, 3-5, and [8][9].3THF have been established by X-ray diffraction analyses. The solution redox properties of 3-5 have also been investigated by cyclic voltammetry. Cyclic voltammograms of 3 and 4 both exhibit an irreversible oxidation feature in CH(2)Cl(2) (E(p,a) = -0.71 V at 0.5 V/s for 3, while E(p,a) = -0.55 V at 0.5 V/s for 4), while cyclic voltammograms of 5 in CH(2)Cl(2) show a reversible oxidation feature (E(1/2) = -0.74 V) followed by an irreversible feature (0.61 V at 0.5 V/s). The reversible feature corresponds to the formation of the 17e cation [(trimpsi)V(CO)(2)(NO)](+) ([5](+)()), and the irreversible feature likely involves the oxidation of [5](+)() to an unstable 16e dication. Treatment of 5 with [Cp(2)Fe][BF(4)] in CH(2)Cl(2) generates [5][BF(4)], which slowly decomposes once formed. Nevertheless, [5][BF(4)] has been characterized by IR and ESR spectroscopies.

Journal Article↗
PubMed2002

Di-mu-methoxy-bis[(eta(5)-cyclopentadienyl)(nitrosyl-kappa N)(trimethylsilylmethyl)molybdenum(II)].

The title complex, [Mo(2)(C(5)H(5))(2)(CH(3)O)(2)(C(4)H(11)Si)(2)(NO)(2)], is formed in high yield by treating [CpMo(NO)(CH(2)SiMe(3))(2)] (Cp is cyclopentadienyl) with methanol. The nitrosyl ligands are nearly linear [O[bond]N[bond]Mo 170.1 (4) and 170.1 (5) degrees ], with short Mo[bond]N bonds [1.769 (4) and 1.776 (4) A] and long N[bond]O bonds [1.216 (5) and 1.201 (4) A]. The central four-membered Mo(2)O(2) ring exhibits an average Mo[bond]O bond length of 2.15 A.

Journal Article↗
PubMed2002

(Eta5-cyclopentadienyl)(p-fluorophenoxo)(nitrosyl)(trimethylsilylmethyl)molybdenum(II).

The title complex, [Mo(C(5)H(5))(C(6)H(4)FO)(C(4)H(11)Si)(NO)], is formed by reacting CpMo(NO)(CH(2)SiMe(3))(2), where Cp is cyclopentadienyl, with one equivalent of p-FC(6)H(4)OH. The complex exhibits the expected piano-stool molecular structure, with a linear nitrosyl ligand [Mo-N-O 168.2(2) degree] having Mo-N and N-O distances of 1.764(2) and 1.207(3)A, respectively. The phenoxo Mo-O distance of 1.945(2)A is suggestive of some multiple-bond character.

Journal Article↗