PubMed Health⌕ Search

Biomedical subjects

Petr Kilian

Publications and source records attributed to Petr Kilian.

10 recordsLinked to original sources
PubMed2006

Investigations on organo-sulfur-nitrogen rings and the thiocyanogen Polymer, (SCN)x.

The synthesis and full characterisation of a series of 1,2,4-thiadiazoles is reported. (SCN)(x) has been studied by a variety of techniques and the data compared with 1,2,4-thiadiazole and 1,2,4-dithiazoles. The observed data suggest that the polymer consists of 1,2,4-dithiazole rings linked by nitrogen atoms. For (SCN)(x), the MALDI-TOF mass spectroscopy showed a parent ion at 1149 and a series of peaks with (SCN)(2) repeat units (116 m/z); this result implies that (SCN)(2) may be the monomer unit of the polymer. Its IR spectrum shows a very broad peak with maximum at 1134 cm(-1) consisting of several overlapping peaks in the same region as ring vibrations for 1,2,4-thiadiazole and 1,2,4-dithiazole compounds. Peaks in the Raman spectrum in the range 400-480 cm(-1) support the presence of disulfide units within the polymer. The solid-state (13)C NMR (99 % (13)C-labelled) spectrum is dominated by two singlets of equal intensity at approximately 187 and 184 ppm with low intensity peaks in the range 152-172 ppm, in approximately the same range as both 1,2,4-thiadiazoles and 1,2,4-dithiazoles. The solid-state (15)N NMR (99 % (15)N labelled) spectrum displays two major peaks of similar intensity at 236.9 and 197.2 ppm, which are clearly very different environments to those observed in bis(3-bromo-1,2,4-thiadiazol-5-yl) disulfide, but similar to 1,2,4-dithiazoles. The X-ray structures of seven C-S-N systems are reported. Preliminary studies on (SeCN)(x) suggest that literature references to this polymer may be in error with the red solid actually being red selenium.

Journal Article↗
PubMed2006

Synthesis and characterisation of four- and six-membered P-Se heterocycles.

The preparation, spectroscopic characterisation and crystal structures of [FcP(mu-Se)Se]2, [FcP(mu-Se2)Se]2 and [PhP(mu-Se2)Se]2 are reported. Crystallographic data reveal planar four-membered PSePSe and skewed six-membered P2Se4 rings, respectively, in all cases with trans arrangement of organic substituents and exo selenium atoms. Whilst stable at room temperature in solid state, NMR data suggest the six-membered rings of both the ferrocenyl and phenyl compounds decompose in the solution with loss of red selenium, forming PSe2PSe five-membered rings.

Journal Article↗
PubMed2006

Preparation and structures of 1,2-dihydro-1,2-diphosphaacenaphthylenes and rigid backbone stabilized triphosphenium cation.

The effect of the special peri-geometry of rigid naphthalene-1,8-diyl backbone in phosphenium formation reaction was investigated. 1,8-Bis(diphenylphosphino) naphthalene and P2I4 afforded triphosphenium iodide in a clean reaction. The reaction of 1,8-bis(dimethylaminophosphino) naphthalene with P2I4 is complex, it afforded four products, all containing the 1,2-dihydro-1,2-diphosphaacenaphthylene motif and heterophosphonium functionalities. Two examples of the rare structural motif of two acenaphthylene units connected head to head and thus a contiguous chain of four phosphorus atoms were also isolated, one compound showing diastereomerization in the solution. All new compounds were fully characterised including single crystal X-ray diffraction.

Journal Article↗
PubMed2006

E2(CN)2 (E = S, Se) and related compounds.

A synthetic, spectroscopic, and theoretical study of Ex(CN)2 (E = S, Se; x = 1-3) is described. The X-ray structures of Se2(CN)2 and Se3(CN)2 have been determined. Se2(CN)2 crystallizes in a chiral space group with the CN groups approximately gauche.

Journal Article↗
PubMed2006

Platinum complexes of dibenzo[1,2]dithiin, dibenzo[1,2]dithiin oxides and related polyaromatic hydrocarbon ligands.

The synthesis of platinum bisphosphine complexes of biphenyl- 2,2'-dichalcogenates and the oxides of dibenzo[1,2]dithiin and related ligand systems by oxidative addition to [Pt(PPh(3))(4)] is reported. We also describe the synthesis of a new compound, dibenzothiophen-4-yldiselenide and its simple platinum complex (obtained by oxidative addition). All complexes have been fully characterised, principally by using multinuclear NMR spectroscopy and in six cases by means of single-crystal X-ray diffraction studies. The majority are simple S/S or Se/Se complexes, however the addition of dibenzo[1,2]dithiin trioxide to [Pt(PPh(3))(4)] gives a bimetallic system, [Pt[2-[S(O)],2'-[S(O)(2)]-biphen}(PPh(3))](2), containing a central Pt(2)S(2)O(2) core in which the ligand behaves as a tridentate S,S,O donor.

Journal Article↗
PubMed2005

Bis(cyclopentadienyl)titanium complexes of naphthalene-1,8-dithiolates, biphenyl 2,2'-dithiolates, and related ligands.

Titanocene 1,8-dithiolato-naphthalene and titanocene 2,2'-dithiolato biphenyl are produced by the reaction of naphtho[1,8-cd]-1,2-dithiole [or the biphenyl] with titanocene dicarbonyl (Ti(II)) in toluene at room temperature. The pro-ligands 2,7-di(tert-butyl)naphtho[1,8-cd]-1,2-dithiole, 5,6-dihydroacenaphtho[5,6-cd]-1,2-dithiole, 4,5-dithioacephenanthrylene, and 13,14-dithiapicene have been used in similar reactions with titanocene dicarbonyl to investigate the effect of steric bulk and of varying the naphthalene backbone on the final complex. The resulting Cp(2)TiS(2)Ar complexes (Ar = naphthalene) have been shown by temperature-dependent (1)H NMR spectroscopy to exist in solution in an envelope conformation with the six-membered TiS(2)C(3) rings undergoing inversion on the NMR time scale while the similar Cp(2)TiS(2)Ar complexes (Ar = biphenyl, binaphthalene) interconvert more rapidly. Titanocene 2,2'-disulfinato biphenyl has been synthesized by the salt elimination reaction of titanocene dichloride (Ti(IV)) and the disodium salt of biphenyl 2,2'-disulfinic acid. Finally, the effect of using pro-ligands where the sulfur atoms have been mono- or di-oxidized has been studied, and an interesting oxygen elimination reaction is observed for the S=O fragments but not for the SO(2) groups. All complexes have been characterized spectroscopically and seven X-ray structures are reported.

Journal Article↗
PubMed2004

Chlorides, oxochlorides, and oxoacids of 1,8-diphosphanaphthalene: a system with imposed close p...p interaction.

Several new 1,8-diphosphanaphthalene oxochloro compounds and oxoacids were prepared and fully characterized. The new compounds are discussed in the broader context with other known congeners to demonstrate the variability of the diphosphanaphthalene scaffolding's bonding patterns. Three principal modes of interaction of the phosphorus moieties were observed in the series: bonding, bridging, and repulsive, resulting respectively in none, moderate, and substantial crowding and distortions. The unexpected dimeric diphosphaacenaphthene anion has been obtained from disproportionative hydrolysis of Nap(PCl(2))(2) (Nap = naphthalene-1,8-diyl).

Journal Article↗
PubMed2004

Synthesis and full characterisation of 6-chloro-2-iodopurine, a template for the functionalisation of purines.

A simple and efficient synthesis of 6-chloro-2-iodopurine from hypoxanthine has been achieved. This strategy relied on a regiospecific lithiation/quenching sequence of 6-chloro-9-(tetrahydropyran-2-yl)purine using Harpoon's base and tributyltin chloride. HMBC NMR studies on the product and intermediates confirmed the regioselectivity of this methodology. The molecular structures of the final dihalogenopurine and its 9-protected precursor were determined by single crystal X-ray diffraction.

Crystallography, X-Ray↗
PubMed2003

Naphthalene-1,8-diyl bis(halogenophosphanes): novel syntheses and structures of useful synthetic building blocks.

A series of new bay region disphospha-functionalised naphthalenes is reported. The reduction of ylidic phosphonium phosphoride NapP(2)Cl(6) (1) (Nap=naphthalene-1,8-diyl) with MeOPCl(2) gives the important synthon Nap(PCl(2))(2) (2) in nearly quantitative yield. Reaction of 1 with magnesium metal affords (NapP(2))(n) (3), which reacts with Br(2) and I(2), yielding Nap(PBr(2))(2) (4) and Nap(PI)(2) (5), respectively. X-ray structure determinations reveal a twisted geometry of the naphthalene ring in sterically strained 2 and 4, whilst the presence of a P-P bond in 5 results in the release of the steric strain and generation of the planar NapP(2) moiety. Although the tetrahedral P environments are severely distorted the sigma(3)P-sigma(3)P bonding in 5 represents a new type of P-P bonding environment in 1,8-diphosphanaphthalenes. Compounds 1, 4 and 5 each represent the highest coordination, achievable by direct halogenation. The new compounds 2-5 were fully characterised by NMR, IR, and Raman spectroscopy, mass spectrometry, and elemental analysis.

Journal Article↗