PubMed Health⌕ Search

Biomedical subjects

Petra Rudolf

Publications and source records attributed to Petra Rudolf.

11 recordsLinked to original sources
PubMed2007

Improvements in the characterization of the crystalline structure of acid-terminated alkanethiol self-assembled monolayers on Au(111).

We report a study of acid-terminated self-assembled monolayers of alkanethiols of different length, 11-mercaptoundecanoic acid (11-MUA) and 16-mercaptohexadecanoic acid (16-MHDA), on Au(111). Scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and contact angle techniques were used for characterization, and the results were compared with those obtained from n-alkanethiols of similar chain length, providing a detailed description of the two-dimensional crystalline structure. Molecular resolution STM images show that 11-MUA forms a dense-packed monolayer arranged in a (square root 3 x square root 3)R30 degrees structure with a c(2 x 4) superlattice, where the simple hexagonal phase, the c(2 x 4) superlattice, and nonordered areas coexist. 16-MHDA assembles in a uniform monolayer with similar morphology to that of 11-MUA, but molecular resolution could not be reached in STM due to both the hydrophilicity of the acid groups and the poor conductivity of the thick monolayer. Nevertheless, the monolayer thicknesses estimated by XPS and electrochemistry and the highly blocking character of the film observed by electrochemistry as well as the low water contact angle are consistent with 16-MHDA molecules forming a compact monolayer on the Au(111) substrate with fully extended alkyl chains and acid groups pointing away from the surface. The results obtained for 16-MHDA were reproducible under different preparation conditions such as the addition or omission of acetic acid to the ethanolic solution. Contrary to other reports, we demonstrate that ordered acid-terminated self-assembled monolayers are obtained with the same preparation conditions as those of the methyl-terminated ones, without any additional treatment.

Journal Article↗
PubMed2006

Adsorption of fumaramide [2]rotaxane and its components on a solid substrate: a coverage-dependent study.

The coverage-dependent adsorption on Au(111) of a fumaramide [2]rotaxane and its components, a benzylic amide macrocycle and a fumaramide thread, is studied using high-resolution electron energy loss spectroscopy (HREELS). Up to monolayer coverage, the relative intensity of out-of-plane to in-plane phenyl ring vibrational modes indicates that the macrocycle adopts an orientation with the phenyl rings largely parallel to the surface. The formation of a chemisorption bond is evidenced by the presence of a Au-O stretching vibration. In contrast, the thread shows no evidence of chemisorption or a preferential orientation. The introduction of the thread into the macrocycle partly disrupts the film order so that the resulting chemisorbed rotaxane shows intermediate behavior with a preferential orientation up to 0.5 ML coverage. A decrease in film order and the absence of a preferred molecular orientation is observed for all three molecules at multilayer coverages. The spectral differences are addressed by molecular dynamics simulations in terms of the mobility of the phenyls of the three molecules on Au(111).

Journal Article↗
PubMed2006

Clay-fulleropyrrolidine nanocomposites.

In this work, we describe the insertion of a water-soluble bisadduct fulleropyrrolidine derivative into the interlayer space of three layered smectite clays. The composites were characterized by a combination of powder X-ray diffraction, transmission electron microscopy, X-ray photoemission and FTIR spectroscopies, and laser flash photolysis measurements. The experiments, complemented by computer simulations, give insight into the formation process, structural details, and properties of the fullerene/clay nanocomposites. The reported composite materials constitute a new hybrid system, where C(60) differs from its crystals or its solutions, and open new perspectives for the design and construction of novel C(60)-based organic/clay hybrid materials.

Aluminum Silicates↗
PubMed2006

Surface enhanced second harmonic generation from macrocycle, catenane, and rotaxane thin films: experiments and theory.

Surface enhanced second harmonic generation (SE SHG) experiments on molecular structures, macrocycles, catenanes, and rotaxanes, deposited as monolayers and multilayers by vacuum sublimation on silver, are reported. The measurements show that the molecules form ordered thin films, where the highest degree of order is observed in the case of macrocycle monolayers and the lowest in the case of rotaxane multilayers. The second harmonic generation activity is interpreted in terms of electric field induced second harmonic (EFISH) generation where the electric field is created by the substrate silver atoms. The measured second order nonlinear optical susceptibility for a rotaxane thin film is compared with that obtained by considering only EFISH contribution to SHG intensity. The electric field on the surface of a silver layer is calculated by using the Delphi4 program for structures obtained with TINKER molecular mechanics/dynamics simulations. An excellent agreement is observed between the calculated and the measured SHG susceptibilities.

Journal Article↗
PubMed2006

Redox mediation at 11-mercaptoundecanoic acid self-assembled monolayers on gold.

Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and digital simulation techniques were used to investigate quantitatively the mechanism of electron transfer (ET) through densely packed and well-ordered self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid on gold, either pristine or modified by physically adsorbed glucose oxidase (GOx). In the presence of ferrocenylmethanol (FcMeOH) as a redox mediator, ET kinetics involving either solution-phase hydrophilic redox probes such as [Fe(CN)6]3-/4- or surface-immobilized GOx is greatly accelerated: [Fe(CN)6]3-/4- undergoes diffusion-controlled ET, while the enzymatic electrochemical conversion of glucose to gluconolactone is efficiently sustained by FcMeOH. Analysis of the results, also including the digital simulation of CV and EIS data, showed the prevalence of an ET mechanism according to the so-called membrane model that comprises the permeation of the redox mediator within the SAM and the intermolecular ET to the redox probe located outside the monolayer. The analysis of the catalytic current generated at the GOx/SAM electrode in the presence of glucose and FcMeOH allowed the high surface protein coverage suggested by X-ray photoelectron spectroscopy (XPS) measurements to be confirmed.

Journal Article↗
PubMed2006

Carbon nanotubes encapsulating superconducting single-crystalline tin nanowires.

Superconducting low dimensional systems are the natural choice for fast and sensitive infrared detection, because of their quantum nature and the low-noise, cryogenic operation environment. On the other hand, monochromatic and coherent electron beams, emitted from superconductors and carbon-based nanostructured materials, respectively, are significant for the development of electron optical systems such as electron microscopes and electron-beam nanofabrication systems. Here we describe for the first time a simple method which yields carbon nanotubes encapsulating single crystalline superconducting tin nanowires by employing the catalytic chemical vapor deposition method over solid tin dioxide. The superconducting tin nanowires, with diameters 15-35 nm, are covered with well-graphitized carbon walls and show, due to their reduced diameters, a critical magnetic field (Hc) more than 30 times higher than the value of bulk metallic tin.

Adsorption↗
PubMed2005

Experimental and theoretical study of the adsorption of fumaramide [2]rotaxane on Au(111) and Ag(111) surfaces.

Thin films of fumaramide [2]rotaxane, a mechanically interlocked molecule composed of a macrocycle and a thread in a "bead and thread" configuration, were prepared by vapor deposition on both Ag(111) and Au(111) substrates. X-ray photoelectron spectroscopy (XPS) and high-resolution electron-energy-loss spectroscopy were used to characterize monolayer and bulklike multilayer films. XPS determination of the relative amounts of carbon, nitrogen, and oxygen indicates that the molecule adsorbs intact. On both metal surfaces, molecules in the first adsorbed layer show an additional component in the C 1s XPS line attributed to chemisorption via amide groups. Molecular-dynamics simulation indicates that the molecule orients two of its eight phenyl rings, one from the macrocycle and one from the thread, in a parallel bonding geometry with respect to the metal surfaces, leaving three amide groups very close to the substrate. In the case of fumaramide [2]rotaxane adsorption on Au(111), the presence of certain out-of-plane phenyl ring and Au-O vibrational modes points to such bonding and a preferential molecular orientation. The theoretical and experimental results imply that the three-dimensional intermolecular configuration permits chemisorption at low coverage to be driven by interactions between the three amide functions of fumaramide [2]rotaxane and the Ag(111) or Au(111) surface.

Journal Article↗
PubMed2005

Electrode surface modification by a spirobifluorene derivative. An XPS and electrochemical investigation.

Ordered thin layers of a spirobifluorene derivative containing an amino group were formed by grafting them onto a self-assembled monolayer (SAM) of 11-mercaptoundecanoic acid (11-MUA) on gold. Either physical (H-bonding) or chemical bonding (activated by EDCl) was investigated. X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy confirmed that both methods can be used to effectively graft 2-amino-9,9'-spirobifluorene molecules onto the SAM surface, giving high surface coverages, with a significantly higher packing in the case of chemisorbed films. EIS measurements also showed that the covalently bonded spirobifluorene SAMs act as an effective barrier to both ion penetration and heterogeneous electron transfer.

Journal Article↗
PubMed2005

Macroscopic transport by synthetic molecular machines.

Nature uses molecular motors and machines in virtually every significant biological process, but demonstrating that simpler artificial structures operating through the same gross mechanisms can be interfaced with-and perform physical tasks in-the macroscopic world represents a significant hurdle for molecular nanotechnology. Here we describe a wholly synthetic molecular system that converts an external energy source (light) into biased brownian motion to transport a macroscopic cargo and do measurable work. The millimetre-scale directional transport of a liquid on a surface is achieved by using the biased brownian motion of stimuli-responsive rotaxanes ('molecular shuttles') to expose or conceal fluoroalkane residues and thereby modify surface tension. The collective operation of a monolayer of the molecular shuttles is sufficient to power the movement of a microlitre droplet of diiodomethane up a twelve-degree incline.

Biomimetics↗