Biomedical subjects

Petre Stoica

Publications and source records attributed to Petre Stoica.

7 recordsLinked to original sources

PubMed2006

Area-selective signal parameter estimation for two-dimensional MR spectroscopy data.

We consider the problem of parametric spectral analysis of two-dimensional (2D) magnetic resonance spectroscopy (MRS) data. Estimating the signal components from 2D MRS data is becoming common practice in many clinical MR applications. The most frequently used signal processing tool for this estimation problem is the non-parametric 2D-FFT. There are several alternative parametric methods available to perform this analysis, yet their computational complexity is generally rather high and it becomes prohibitive when the number of points in the measured data matrix is large. In this paper, we propose a novel signal parameter estimation technique which operates on a pre-specified sub-area of the 2D spectrum. This area-selective approach can be used either to estimate only the signal components of main interest in the data, or to compute signal parameter estimates of all present signal components as the computational burden for each sub-area is low. In the numerical example section we consider both simulated data and in vitro 1H data acquired from a 1.5 T MR scanner.

Algorithms↗

PubMed2006

Multistatic adaptive microwave imaging for early breast cancer detection.

We propose a new multistatic adaptive microwave imaging (MAMI) method for early breast cancer detection. MAMI is a two-stage robust Capon beamforming (RCB) based image formation algorithm. MAMI exhibits higher resolution, lower sidelobes, and better noise and interference rejection capabilities than the existing approaches. The effectiveness of using MAMI for breast cancer detection is demonstrated via a simulated 3-D breast model and several numerical examples.

Algorithms↗

PubMed2005

Spectral analysis of multichannel MRS data.

The use of phased-array receive coils is a well-known technique to improve the image quality in magnetic resonance imaging studies of, e.g., the human brain. It is common to incorporate proton (1H) magnetic resonance spectroscopy (MRS) experiments in these studies to quantify key metabolites in a region of interest. Detecting metabolites in vivo is often difficult, requiring extensive scans to achieve signal-to-noise ratios (SNR) that provide suitable diagnostic results. Combining the MR absorption spectra obtained from several receive coils is one possible approach to increase the SNR. Previous literature does not give a clear overview of the wide range of possible approaches that can be used to combine MRS data from multiple detector coils. In this paper, we consider the multicoil MRS approach and introduce several signal processing tools to address the problem from different nonparametric, semiparametric, and parametric perspectives, depending on the amount of available prior knowledge about the data. We present a numerical study of these tools using both simulated 1H MRS data and experimental MRS data acquired from a 3T MR scanner.

Algorithms↗

PubMed2004

Parametric methods for frequency-selective MR spectroscopy-a review.

Accurate quantitation of the spectral components in a pre-selected frequency band for magnetic resonance spectroscopy (MRS) signals is a frequently addressed problem in the MR community. One obvious application for such a frequency-selective technique is to lower the computational burden in situations when the measured data sequence contains too many samples to be processed using a standard full-spectrum method. Among the frequency-selective methods previously proposed in the literature, only a few possess the two features of primary concern: high robustness against interferences from out-of-band components and low computational complexity. In this survey paper we consider five spectral analysis methods which can be used for MRS signal parameter estimation in a selected frequency band. We re-derive the filter diagonalization method (FDM) in a new way that allows an easy comparison to the other methods presented. Then we introduce a frequency-selective version of the method of direction estimation (MODE) which has not been applied to MR-spectroscopy before. In addition, we present a filtering and decimation technique using a maximum phase bandpass FIR-filter and relate it to a similar ARMA-modeling approach known as SB-HOYWSVD (sub-band high-order Yule-Walker singular value decomposition). Finally, we study the numerical performances of these four methods and compare them to that of the recently introduced SELF-SVD (Singular Value Decomposition-based method usable in a SELected Frequency band) in several examples using simulated MR data, and discuss the benefits and disadvantages of each technique.

Algorithms↗

PubMed2004

Using prior knowledge in SVD-based parameter estimation for magnetic resonance spectroscopy--the ATP example.

We introduce the knowledge-based singular value decomposition (KNOB-SVD) method for exploiting prior knowledge in magnetic resonance (MR) spectroscopy based on the SVD of the data matrix. More specifically, we assume that the MR data are well modeled by the superposition of a given number of exponentially damped sinusoidal components and that the dampings alphakappa, frequencies omegakappa, and complex amplitudes rhokappa of some components satisfy the following relations: alphakappa = alpha (alpha = unknown), omegakappa = omega + (kappa- 1)delta (omega = unknown, delta = known), and rhokappa = Ckapparho (rho = unknown, ckappa = known real constants). The adenosine triphosphate (ATP) complex, which has one triple peak and two double peaks whose dampings, frequencies, and amplitudes may in some cases be known to satisfy the above type of relations, is used as a vehicle for describing our SVD-based method throughout the paper. By means of numerical examples, we show that our method provides more accurate parameter estimates than a commonly used general-purpose SVD-based method and a previously suggested prior knowledge-based SVD method.

Adenosine Triphosphate↗

PubMed2004

Wideband RELAX and wideband CLEAN for aeroacoustic imaging.

Microphone arrays can be used for acoustic source localization and characterization in wind tunnel testing. In this paper, the wideband RELAX (WB-RELAX) and the wideband CLEAN (WB-CLEAN) algorithms are presented for aeroacoustic imaging using an acoustic array. WB-RELAX is a parametric approach that can be used efficiently for point source imaging without the sidelobe problems suffered by the delay-and-sum beamforming approaches. WB-CLEAN does not have sidelobe problems either, but it behaves more like a nonparametric approach and can be used for both point source and distributed source imaging. Moreover, neither of the algorithms suffers from the severe performance degradations encountered by the adaptive beamforming methods when the number of snapshots is small and/or the sources are highly correlated or coherent with each other. A two-step optimization procedure is used to implement the WB-RELAX and WB-CLEAN algorithms efficiently. The performance of WB-RELAX and WB-CLEAN is demonstrated by applying them to measured data obtained at the NASA Langley Quiet Flow Facility using a small aperture directional array (SADA). Somewhat surprisingly, using these approaches, not only were the parameters of the dominant source accurately determined, but a highly correlated multipath of the dominant source was also discovered.

Aircraft↗

PubMed2003

Frequency-domain method based on the singular value decomposition for frequency-selective NMR spectroscopy.

In several applications of NMR spectroscopy the user is interested only in the components lying in a small frequency band of the spectrum. A frequency selective analysis deals precisely with this kind of NMR spectroscopy: parameter estimation of only those spectroscopic components that lie in a preselected frequency band of the NMR data spectrum, with as little interference as possible from the out-of-band components and in a computationally efficient way. In this paper we introduce a frequency-domain singular value decomposition (SVD)-based method for frequency selective spectroscopy that is computationally simple, statistically accurate, and which has a firm theoretical basis. To illustrate the good performance of the proposed method we present a number of numerical examples for both simulated and in vitro NMR data.

Algorithms↗