PubMed Health⌕ Search

Biomedical subjects

Philip Mountford

Publications and source records attributed to Philip Mountford.

12 recordsLinked to original sources
PubMed2003

Group 6 imido complexes supported by diamido-donor ligands.

Reactions of the lithiated diamido-pyridine or diamido-amine ligands Li(2)N(2)N(py) or Li(2)N(2)N(am) with [W(NAr)Cl(4)(THF)] (Ar = Ph or 2,6-C(6)H(3)Me(2); THF = tetrahydrofuran) afforded the corresponding imido-dichloride complexes [W(NAr)(N(2)N(py))Cl(2)] (R = Ph, 1, or 2,6-C(6)H(3)Me(2), 2) or [W(NAr)(N(2)N(am))Cl(2)] (R = Ph, 3, or 2,6-C(6)H(3)Me(2), 4), respectively, where N(2)N(py) = MeC(2-C(5)H(4)N)(CH(2)NSiMe(3))(2) and N(2)N(am) = Me(3)SiN(CH(2)CH(2)NSiMe(3))(2). Subsequent reactions of 1 with MeMgBr or PhMgCl afforded the dimethyl or diphenyl complexes [W(NPh)(N(2)N(py))R(2)] (R = Me, 5, or Ph, 6), respectively, which have both been characterized by single crystal X-ray diffraction. Reactions of Li(2)N(2)N(py) or Li(2)N(2)N(am) with [Mo(NR)(2)Cl(2)(DME)] (R = (t)Bu or Ph; DME = 1,2-dimethoxyethane) afforded the corresponding bis(imido) complexes [Mo(NR)(2)(N(2)N(py))] (R = (t)Bu, 7, or Ph, 8) and [Mo(N(t)Bu)(2)(N(2)N(am))] (9).

Journal Article↗
PubMed2003

Recent developments in the non-cyclopentadienyl organometallic and related chemistry of scandium.

Up to the early to mid 1990s the organometallic chemistry of scandium was dominated by cyclopentadienyl derivatives. This present article highlights advances in the synthesis and reactivity of non-cyclopentadienyl organometallic and related compounds of scandium. These include: compounds containing arene and other eta(x)-CxRx ligands; compounds with macrocyclic and fac-L3 ligands; compounds with polydentate ligands that incorporate amide donors; compounds with bidentate, monoanionic N,N' donor ligands; and compounds with iminophenolate, bis(phenoxide) and some other anionic O-donor ligands.

Journal Article↗
PubMed2003

Synthesis and reactivity of calix[4]arene-supported group 4 imido complexes.

New mononuclear titanium and zirconium imido complexes [M(NR)(R'(2)calix)] [M=Ti, R'=Me, R=tBu (1), R=2,6-C(6)H(3)Me(2) (2), R=2,6-C(6)H(3)iPr(2) (3), R=2,4,6-C(6)H(2)Me(3) (4); M=Ti, R'=Bz, R=tBu (5), R=2,6-C(6)H(3)Me(2) (6), R=2,6-C(6)H(3)iPr(2) (7); M=Zr, R'=Me, R=2,6-C(6)H(3)iPr(2) (8)] supported by 1,3-diorganyl ether p-tert-butylcalix[4]arenes (R'(2)calix) were prepared in good yield from the readily available complexes [MCl(2)(Me(2)calix)], [Ti(NR)Cl(2)(py)(3)], and [Ti(NR)Cl(2)(NHMe(2))(2)]. The crystallographically characterised complex [Ti(NtBu)(Me(2)calix)] (1) reacts readily with CO(2), CS(2), and p-tolyl-isocyanate to give the isolated complexes [Ti[N(tBu)C(O)O](Me(2)calix)] (10), [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [Ti[N(tBu)C(O)N(-4-C(6)H(4)Me)](Me(2)calix)] (13). In the case of CO(2) and CS(2), the addition of the heterocumulene to the Ti-N multiple bond is followed by a cycloreversion reaction to give the dinuclear complexes 11 and 12. The X-ray structure of 13.4(C(7)H(8)) clearly establishes the N,N'-coordination mode of the ureate ligand in this compound. Complex 1 undergoes tert-butyl/arylamine exchange reactions to form 2, 3, [Ti(N-4-C(6)H(4)Me)(Me(2)calix)] (14), [Ti(N-4-C(6)H(4)Fc)(Me(2)calix)] (15) [Fc=Fe(eta(5)-C(5)H(5))(eta(5)-C(5)H(4))], and [[Ti(Me(2)calix)](2)[mu-(N-4-C(6)H(4))(2)CH(2)]] (16). Reaction of 1 with H(2)O, H(2)S and HCl afforded the compounds [[Ti(mu-O)(Me(2)calix)](2)] (11), [[Ti(mu-S)(Me(2)calix)](2)] (12), and [TiCl(2)(Me(2)calix)] in excellent yields. Furthermore, treatment of 1 with two equivalents of phenols results in the formation of [Ti(O-4-C(6)H(4)R)(2)(Me(2)calix)] (R=Me 17 or tBu 18), [Ti(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (19) and [Ti(mbmp)(Me(2)calix)] (20; H(2)mbmp=2,2'-methylene-bis(4-methyl-6-tert-butylphenol) or CH(2)([CH(3)][C(4)H(9)]C(6)H(2)-OH)(2)). The bis(phenolate) compounds 17 and 18 with para-substituted phenolate ligands undergo elimination and/or rearrangement reactions in the nonpolar solvents pentane or hexane. The metal-containing products of the elimination reactions are dinuclear complexes [[Ti(O-4-C(6)H(4)R)(Mecalix)](2)] [R=Me (23) or tBu (24)] where Mecalix=monomethyl ether of p-tert-butylcalix[4]arene. The products of the rearrangement reaction are [Ti(O-4-C(6)H(4)Me)(2) (paco-Me(2)calix)] (25) and [Ti(O-4-C(6)H(4)tBu)(2)(paco-Me(2)calix)] (26), in which the metallated calix[4]arene ligand is coordinated in a form reminiscent of the partial cone (paco) conformation of calix[4]arene. In these compounds, one of the methoxy groups is located inside the cavity of the calix[4]arene ligand. The complexes 24, 25 and 26 have been crystallographically characterised. Complexes with sterically more demanding phenolate ligands, namely 19 and 20 and the analogous zirconium complexes [Zr(O-4-C(6)H(4)Me)(2)(Me(2)calix)] (21) and [Zr(O-2,6-C(6)H(3)Me(2))(2)(Me(2)calix)] (22) do not rearrange. Density functional calculations for the model complexes [M(OC(6)H(5))(2)(Me(2)calix)] with the calixarene possessing either cone or partial cone conformations are briefly presented.

Journal Article↗
PubMed2003

Are J(Si-H) NMR coupling constants really a probe for the existence of nonclassical H-Si interactions?

A series of hydridosilyl complexes of tantalum, Cp(ArN)Ta(PMe3)(H)(SiClnR3-n) (n = 0-3), was prepared and studied by 29Si NMR, X-ray diffraction, and DFT calculations. An unprecedented increase of the J(Si-H) coupling constant between the hydride and silyl ligands from 14 Hz for n = 0 to 50 Hz n = 3 was observed, which however, according to DFT calculations, does not correspond to stronger bonding interaction between silicon and hydride ligands, with the strongest interaction being for n = 1.

Journal Article↗
PubMed2002

Synthesis and reactivity of the imidotungsten methyl cation [W(N2Npy)(NPh)Me]+: CO2 adds to the W=NPh bond and does not insert into the W-Me bond.

The imidotungsten dimethyl compound [W(N2Npy)(NPh)Me2] 2 reacts with BArF3 to form the cationic complex [W(N2Npy)(NPh)Me]+ 3+ [anion = [MeBArF3]-; ArF = C6F5; N2Npy = MeC(2C5H4N)(CH2NSiMe3)2] which undergoes methyl group exchange with added 2, [Cp2ZrMe2] or ZnMe2; treatment of cation 3+ with CO2 or isocyanates leads to cycloaddition reactions at the W=NPh bond and not insertion into the W-Me bond, despite the latter product being the most thermodynamically favourable according to DFT calculations.

Journal Article↗
PubMed2002

New diamide-diamine ligands and their zirconium and hafnium dichloride and bis(dimethylamide) complexes.

The multigram syntheses of the protio ligands (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHSiMe(2)R)(2) (R = Me, H(2)N(2)NN' 3; R = (t)Bu, H(2)N(2)NN() 4) are described via reactions of the previously reported (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NH(2))(2) (1). A new synthesis of 1 is reported starting from 2-aminomethylpyridine and N-tosylaziridine, proceeding via (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHTs)(2) (2). Reaction of H(2)N(2)NN' or H(2)N(2)NN* with (n)BuLi gives good yields of the dilithiated derivatives Li(2)N(2)NN' and Li(2)N(2)NN*. Reaction of H(2)N(2)NN' or H(2)N(2)NN* with [MCl(2)(CH(2)SiMe(3))(2)(Et(2)O)(2)] gives the cis-dichloride complexes [MCl(2)(L)] (L = N(2)NN', M = Zr 7 or Hf 8; L = N(2)NN(), M = Zr 9). The corresponding reactions of H(2)N(2)NN' or H(2)N(2)NN* with [Zr(NMe(2))(4)] afford the bis(dimethylamide) derivatives [Zr(NMe(2))(2)(L)] (L = N(2)NN' 10 or N(2)NN* 11). All of these protonolysis reactions proceed smoothly and in good yields. Attempts to prepare the titanium complexes [Ti(X)(2)(N(2)NN')] (X = Cl or NMe(2)) were unsuccessful. The X-ray crystal structures of (2-NC(5)H(4))CH(2)N(CH(2)CH(2)NHTs)(2).EtOH, [ZrCl(2)(N(2)NN')].0.5C(6)H(6), [Zr(NMe(2))(2)(N(2)NN')], and [Zr(NMe(2))(2)(N(2)NN*)] are reported.

Journal Article↗
PubMed1998

Titanium Imido Complexes with Tetradentate Schiff Base Ligands.

New mono- and binuclear titanium imido complexes supported by tetradentate, dianionic N(2)O(2)-donor Schiff base ligands were prepared in good yield from the readily available [Ti(NBu(t))Cl(2)(py)(3)] (1a). Thus treatment of 1a with Na(2)[substituted-salen] gave monomeric [Ti(NBu(t))(substituted-salen)] where substituted-salen = Et(2)salen (2) or Bu(t)(4)salen (4). In contrast, the binuclear complex [Ti(NBu(t)){&mgr;-(MeO)(2)salen}](2) (5) was obtained from 1a and Na(2)[(MeO)(2)salen]. The less sterically crowded compounds 2 and 5 undergo tert-butyl imide/arylamine exchange reactions to form [Ti(N-2,6-C(6)H(3)Me(2))(Et(2)salen)] (3) and [Ti(N-2,6-C(6)H(3)Me(2)){&mgr;-(MeO)(2)salen}](2) (6), respectively, whereas 4 does not exhibit this kind of reactivity. The compound 3 can also be obtained directly from Na(2)[Et(2)salen] and [Ti(N-2,6-C(6)H(3)Me(2))Cl(2)(py)(3)] (1b). Crystal data for 3: triclinic, P&onemacr;, a = 12.216(4) Å, b = 12.312(11) Å, c = 17.246(2) Å, alpha = 90.352(12) degrees, beta = 102.59(2) degrees, gamma = 104.96(2) degrees, V = 2440.3(8) Å(3), Z = 4, R = 0.051, R(w) = 0.066 for 7011 data with I > 2sigma(I). Crystal data for 5.CH(2)()Cl(2)(): orthorhombic, Pbca, a = 14.747(4) Å, b = 17.042(4) Å, c = 20.545(3) Å, V = 5163.5(13) Å(3), Z = 4, R(1) = 0.096, wR(2) = 0.086 for 3765 data with I > 2sigma(I). Crystal data for 6: monoclinic, C2/c, a = 17.902(5) Å, b = 12.411(4) Å, c = 21.068(5) Å, beta = 90.27(2) degrees, V = 4681(2) Å(3), Z = 4, R = 0.034, R(w)() = 0.039 for 3633 data with I > 2sigma(I).

Journal Article↗
PubMed1997

Titanium Imido Complexes Supported by Amidinate Ligands: Synthesis, Solution Dynamics, and Solid State Structures.

Reaction of Li[PhC(NSiMe(3))(2)] with the complexes [Ti(NR)Cl(2)(py)(3)] affords the corresponding (N,N'-bis(trimethylsilyl)benzamidinato)titanium imido derivatives [Ti(NR){PhC(NSiMe(3))(2)}Cl(py)(2)] [R = Bu(t) (1), 2,6-C(6)H(3)Me(2) (2), 2,6-C(6)H(3)Pr(i)(2) (3)], which, in solution, exist in temperature-dependent, dynamic equilibrium with their mono(pyridine) homologues [Ti(NR){PhC(NSiMe(3))(2)}Cl(py)] and free pyridine. Kinetic and thermodynamic data for these processes are reported, and the relative contributions of the DeltaH and DeltaS terms associated with all three equilibria are identified. The arylimido complexes 2 and 3 may also be prepared by treating 1 with the appropriate arylamine. Reaction of Li[MeC(NC(6)H(11))(2)] with [Ti(NBu(t))Cl(2)(py)(3)] gives the binuclear N,N'-bis(cyclohexyl)acetamidinato derivative [Ti(2)(&mgr;-NBu(t))(2){MeC(NC(6)H(11))(2)}(2)Cl(2)] (4). The X-ray structures of 2 and 4 have been determined. Crystal data for 2: triclinic, P&onemacr;, a = 11.219(5) Å, b = 12.131(6) Å, c = 13.208(7) Å, alpha = 80.34(5) degrees, beta = 87.41(4) degrees, gamma = 75.13(3) degrees, V = 1722.1(15) Å(3), Z = 2, R = 0.054, R(w) = 0.056. Crystal data for 4: triclinic, P&onemacr;, a = 10.455(3) Å, b = 10.637(5) Å, c = 11.024(3) Å, alpha = 90.52(4) degrees, beta = 112.62(3) degrees, gamma = 114.10(3) degrees, V = 1012.8(10) Å(3), Z = 1, R = 0.0453, R(w) = 0.0495.

Journal Article↗
PubMed1997

Mononuclear Amido and Binuclear Imido Zirconium Complexes Supported by Dibenzotetraaza[14]annulene Ligands. X-ray Structure of [(Me(4)taa)Zr(&mgr;-NR)(2)Zr(NHR)(2)] (R = Bu(t) or 2,6-C(6)H(3)Me(2)).

Reaction of 2 equiv of Li[NH-2,6-C(6)H(3)R(2)] with [(Me(4)taa)ZrCl(2)] (Me(4)taaH(2) = tetramethyldibenzotetraaza[14]annulene) gives the bis(amido) derivatives [(Me(4)taa)Zr(NH-2,6-C(6)H(3)R(2))(2)] [R = Pr(i) (1) and Me (2)]. Addition of Me(4)taaH(2) to [Zr(N-2,6-C(6)H(3)Pr(i)(2))(NH-2,6-C(6)H(3)Pr(i)(2))(2)(py)(2)] also affords 1. The reaction of 2 equiv of aryl or alkyl amines H(2)NR with the bis(alkyl) complex [(Me(4)taa)Zr(CH(2)SiMe(3))(2)] is the most versatile method for preparing [(Me(4)taa)Zr(NHR)(2)] (R = 2,6-C(6)H(3)Pr(i)(2), 2,6-C(6)H(3)Me(2), Ph, or Bu(t)). Reaction of 1 equiv of Me(4)taaH(2) with the binuclear complexes [(Bu(t)NH)(2)Zr(&mgr;-NBu(t))(2)Zr(NHBu(t))(2)] or [(py)(HN-2,6-C(6)H(3)Me(2))(2)Zr(&mgr;-N-2,6-C(6)H(3)Me(2))(2)Zr(NH-2,6-C(6)H(3)Me(2))(2)(py)] gives the asymmetrically substituted derivatives [(Me(4)taa)Zr(&mgr;-NR)(2)Zr(NHR)(2)] [R = Bu(t) (6) or 2,6-C(6)H(3)Me(2) (8)], which have been crystallographically characterized.

Journal Article↗
PubMed1996

Imidotitanium Tris(pyrazolyl)hydroborates: Synthesis, Solution Dynamics, and Solid-State Structure.

Reaction of [Ti(NBu(t))Cl(2)(py-Bu(t))(2)] (1; py-Bu(t) = 4-tert-butyl pyridine) with 1 equivalent of K[Tp(Me2)], K[Tp(Pri)] or K[Tp(Pri,Br)] affords the corresponding complexes [Tp(Me2)Ti(NBu(t))Cl(py-Bu(t))] (2), [Tp(Pri)Ti(NBu(t))Cl(py-Bu(t))] (3), and [Tp(Pri,Br)Ti(NBu(t))Cl(py-Bu(t))] (4), respectively, which are the first examples of imido Group 4 tris(pyrazolyl)hydroborates [Tp(Me2) = tris(3,5-dimethylpyrazolyl)hydroborate; Tp(Pri) = tris(3-isopropylpyrazolyl)hydroborate; Tp(Pri,Br) = tris(3-isopropyl-4-bromopyrazolyl)hydroborate]. Complexes 2-4 are fluxional on the (1)H and (13)C NMR time scales, the spectra indicating restricted rotation about the Ti-py-Bu(t) bond. Activation parameters for this dynamic process have been determined both by (13)C NMR lineshape analysis and by coalescence measurements. The solution-state structure for 2 has been unambiguously assigned from a low temperature, phase-sensitive (1)H NOESY DQF spectrum and the solid-state X-ray crystal structure of the dichloromethane solvate of 3 has been determined (space group P2(1)/n; a = 12.539(3), b = 14.686(3), c = 21.747(4) Å; beta = 91.28(3) degrees; R(1) = 0.0694 and wR(2) = 0.154 for 1578 observed reflections). (13)C NMR Deltadelta values (Deltadelta = delta(C(alpha)) - delta(C(beta))) for the tert-butyl imido ligand in 2-4 suggest that the donor ability of the tris(pyrazolyl)hydroborate ligands increases in the order Tp(Pri,Br) < Tp(Pri) < Tp(Me2). None of these ligands, however, is as effective a donor to the metal center as either eta-C(5)H(5) or eta-C(5)Me(5).

Journal Article↗