PubMed Health⌕ Search

Biomedical subjects

Philip Serwer

Publications and source records attributed to Philip Serwer.

9 recordsLinked to original sources

Matrix conditioning for lengthened capillary DNA sequencing.

Capillary electrophoresis (CE) is currently the preferred format for both DNA sequencing and small DNA fragment analysis. The present study provides a simple revision of the procedure used for CE of DNA with a commercial DNA sequencing apparatus from Applied Biosystems. The revision is electrophoretic conditioning of the sieving matrix (typically POP-6) before sample injection. The effects of this preconditioning are revealed during subsequent analyses performed without replenishing the sieving matrix. The primary effect of preconditioning is to increase peak separations during a subsequent CE. The preconditioning has the following characteristics: (i) The effect on peak separation progressively increases as the preconditioning time increases to at least 6 h. (ii) The effect on peak separation scales approximately as the product of the preconditioning time and the magnitude of the electrical field (162 - 320 V/cm) during preconditioning. (iii) The preconditioning persists for more than 72 h at zero field. Preconditioning of the matrix substantially improves resolution of fragment analysis in the range of 700-2000 nucleotides. For DNA sequencing, the primary impact of preconditioning is, thus far, extension of the range of low-quality base calls at the end of sequence reading. Matrix preconditioning is a new factor to consider when interpreting data obtained by CE in polymer solutions. The mechanism of preconditioning is not yet known.

DNA↗

Analysis of biological motors via multidimensional fractionation: a strategy.

Past strategies for the analysis of ATP-fueled motors include single-motor analysis. Single-motor analysis bypasses limitations caused by motor asynchrony during the traditional ensemble averaging analysis. The present communication describes revised ensemble averaging analysis that also can bypass asynchrony-derived limitations. This revised analysis makes measurements of one motor variable dependent on the others. One example is nondenaturing gel electrophoresis with more than one dimension. Each dimension measures one of the motor variables. This multidimensional procedure is used to obtain the values of "conformational" motor variables as a function of a "clock" motor variable. In theory, the cycle of the motor can be analyzed from a single multidimensional analysis of a collection of asynchronous motors sampled at only one time. That is to say, motor asynchrony becomes an asset, rather than a liability.

DNA Packaging↗

Temperature-dependence of preconditioning for lengthened capillary DNA sequencing.

A previous study shows that electrophoretic preconditioning of a commercial polymer solution increases the spacing and resolution of DNA fragments fractionated in this solution by CE at 50 degrees C (Griess, G. A. et al., Electrophoresis 2005, 26, 102). The present study shows that this preconditioning effect on peak spacing progressively increases when the temperature of preconditioning increases to 70 degrees C, though fractionation is still performed at 50 degrees C. An increase in peak sharpness accompanies the increase in peak separation for DNA fragments longer than 200 bases. Changing the preconditioning temperature from 50 to 70 degrees C optimally improves resolution of fragment analysis in the range of 600-2000 nucleotides. When DNA sequencing is performed with automated base calling and 70 degrees C preconditioning at 319 V/cm (47 cm long capillary, Applied Biosystems 310 apparatus), the range of high-quality base calls is increased by 25% to 750; the range of low-quality base calls is increased by about 100% to 1200 in comparison to DNA sequencing without preconditioning.

DNA↗

Single-particle light microscopy of bacteriophages.

Bacteriophage capsids have a protein shell with a symmetrical, fullerene-like arrangement of subunits. In the case of double-stranded DNA bacteriophages, the capsid joins with accessory proteins to form a DNA packaging motor that packages a genome in a cavity of the capsid. The motor cleaves ATP to obtain the needed energy. Light microscopy of single bacteriophages and single bacteriophage DNA packaging intermediates is being developed for the following reasons: (1) A synchronization-independent, fractionation-independent procedure is needed for the in vitro analysis of bacteriophage DNA packaging motors. (2) A non-biological procedure is needed for identifying and characterizing new bacteriophages needed for studies of bacteriophage gene homologies. In a recent study, light microscopy-based nanometry is used to follow the in vitro packaging of DNA in real time. Fluorescence microscopy of stained DNA is similarly used. Towards a more thorough analysis by fluorescence microscopy, single bacteriophage capsids are visualized by the unenhanced fluorescence of covalently bound protein-specific dyes. Dimerization of capsids is observed in real time. The dimerizing capsids had been restricted to a thin planar zone so that single-particle tracking was performed before, during, and after dimerization. Photobleaching is not a major problem. Thermal motion-based procedures are used for distinguishing binding from accidental co-migration. The long-range objective is the simultaneous real time monitoring of multiple state variables during cycling of a single DNA packaging motor. The results of these basic studies are applicable to both nanotechnological drug delivery and biological therapy.

Bacteriophages↗

Improved isolation of undersampled bacteriophages: finding of distant terminase genes.

Isolation and characterization of new environmental bacteriophages are performed for (1) analyzing microbial evolution and ecology and (2) delivering biological therapy. The sampling of environmental bacteriophages appears, however, to be limited by the procedure (usually liquid enrichment culture) used to propagate them. An alternative, less competitive procedure is developed here for the purpose of isolating new bacteriophages. This procedure involves extraction directly into and then propagation in a dilute agarose gel. Adaptations of this procedure are used to avoid repeated isolation of the same bacteriophage. Some newly isolated bacteriophages grow so poorly that they appear inaccessible to liquid enrichment culture. Four comparatively high titer bacteriophages were isolated and characterized by a genomic sequence survey. Some had genomes with extremely distant relationships to those of other bacteriophages, based on a tree built from the large terminase genes. These methods find novel genomes by rapidly isolating and screening diverse bacteriophages.

Bacteriophage lambda↗

Analysis of proteins stained by Alexa dyes.

Alexa dye staining of proteins is used for the fluorescence microscopy of single particles that are sometimes multimolecular protein complexes. To characterize the staining, post-staining determination must be made of which protein(s) in a complex have been Alexa-stained. The present communication describes the use of sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) for performing this determination. The Alexa-stained proteins are observed directly in gels by illumination with an ultraviolet transilluminator. The test multimolecular particle is bacteriophage T7. The protein capsid of T7 is a multimolecular complex that has both external and internal proteins. SDS-PAGE of Alexa-stained bacteriophage T7 produces fluorescent capsid proteins each of which usually comigrates with an unstained protein. However, one Alexa-induced modification of protein migration was observed by SDS-PAGE. Mass spectrometry shows that the protein with modified migration is the major protein of the outer shell of the T7 capsid. The procedures used are generally applicable. The distribution of Alexa staining among T7 capsid proteins depends on the size of the dye molecule used. The larger the dye molecule is, the greater the preference for external proteins.

Acetates↗

The complete sequence of marine bacteriophage VpV262 infecting vibrio parahaemolyticus indicates that an ancestral component of a T7 viral supergroup is widespread in the marine environment.

The 46,012-bp sequence of the marine bacteriophage VpV262 infecting the bacterium Vibrio parahaemolyticus is reported. The VpV262 sequence reveals that it is a distant relative of marine Roseophage SIO1, and an even more distant relative of coliphage T7. VpV262 and SIO1 appear to represent a widespread marine phage group that lacks an RNA polymerase gene and is ancestral to the T7-like phages. We propose that this group together with the T7-like phages be designated as the T7 supergroup. The ancestral head structure gene module for the T7 supergroup was reconstructed by using sensitive biased Psi-blast searches supplemented by statistical support derived from gene order. In the early and replicative segments, these phages have participated in extensive interchange with the viral gene pool. VpV262 carries a different replicative module than SIO1 and the T7-like phages.

Bacteriophage T7↗

Models of bacteriophage DNA packaging motors.

An ATP-dependent motor drives a DNA genome into a bacteriophage capsid during morphogenesis of double-stranded DNA bacteriophages both in vivo and in vitro. The DNA molecule enters the capsid through a channel in the center of a symmetric protein ring called a connector. Mechanisms in two classes have been proposed for this motor: (1) An ATP-driven rotating connector pulls a DNA molecule via serial power strokes. (2) The connector rectifies DNA motion that is either thermal, biased thermal, or oscillating electrical field-induced (motor-ratchet hypothesis). Mechanisms in the first class have previously been proposed to explain the detailed structure of DNA packaging motors. The present study demonstrates that the motor-ratchet hypothesis also explains the current data, including data in the following categories: biochemical genetics, energetics, structure, and packaging dynamics.

Adenosine Triphosphate↗

Cyclic capillary electrophoresis.

A strategy is described here for increasing both the resolution and the flexibility of capillary electrophoresis performed in a sieving medium of ungelled polymer. This strategy is based on analysis and, sometimes, re-analysis that is done in several stages of constant-field electrophoresis. Enhancement-stages are between the analysis-stages. An enhancement-stage (i) increases the separation between peaks, while (ii) moving DNA molecules in the reverse direction. An enhancement-stage is based on an electrophoretic ratchet generated by a pulsed electrical field that can be zero-integrated. The ratchet-generating pulses are longer than the field pulses that have previously been used to improve the resolution of DNA molecules. No limit has been found to the resolution enhancement achievable. Apparently, diffusion-induced peak broadening is inhibited and, in some cases, may be reversed by the ratchet. The enhancement-stages are critically dependent on the electrical field-dependence of a plot of electrophoretic mobility as a function of DNA length. To generate the pulsed electrical field, a computer-controlled system with a time resolution of 30 microseconds has been developed. Programming is flexible enough to embed other pulses within ratchet-generating pulses. These other pulses can be either the previously used, shorter field-inversion pulses or high-frequency periodic oscillations previously found to sharpen peaks.

Computers↗