PubMed Health⌕ Search

Biomedical subjects

Philip Tinnefeld

Publications and source records attributed to Philip Tinnefeld.

17 recordsLinked to original sources

Multicolor single-molecule spectroscopy with alternating laser excitation for the investigation of interactions and dynamics.

We have developed confocal multicolor single-molecule spectroscopy with optimized detection sensitivity on three spectrally distinct channels for the study of biomolecular interactions and FRET between more than two molecules. Using programmable acousto-optical devices as beamsplitter and excitation filter, we overcome some of the limitations of conventional multichroic beamsplitters and implement rapid alternation between three laser lines. This enables to visualize the synthesis of DNA three-way junctions on a single-molecule basis and to resolve seven stoichiometric subpopulations as well as to quantify FRET in the presence of competing energy transfer pathways. Furthermore, the ability to study correlated molecular movements by monitoring several distances within a biomolecular complex simultaneously is demonstrated.

Color↗

DNA-based molecular wires: multiple emission pathways of individual constructs.

The extent of photon energy transfer through individual DNA-based molecular wires composed of five dyes is investigated at the single molecular level. Combining single-molecule spectroscopy and pulse interleaved excitation imaging, we have directly resolved the time evolution spectral response of individual constructs, while simultaneously probing DNA integrity. Our data clearly show that intact wires exhibit photon-transfer efficiencies close to 100% across five dyes. Dynamical and multiple pathways for the photon emission resulting from conformational freedom of the wire are readily uncovered. These results provide the basis for guiding the synthesis of DNA-based supramolecular arrays with improved photon transport at the nanometer scale.

DNA, Single-Stranded↗

Dissecting and reducing the heterogeneity of excited-state energy transport in DNA-based photonic wires.

Molecular photonic wires are one-dimensional representatives of a family of nanoscale molecular devices that transport excited-state energy over considerable distances in analogy to optical waveguides in the far-field. In particular, the design and synthesis of such complex supramolecular devices is challenging concerning the desired homogeneity of energy transport. On the other hand, novel optical techniques are available that permit direct investigation of heterogeneity by studying one device at a time. In this article, we describe our efforts to synthesize and study DNA-based molecular photonic wires that carry several chromophores arranged in an energetic downhill cascade and exploit fluorescence resonance energy transfer to convey excited-state energy. The focus of this work is to understand and control the heterogeneity of such complex systems, applying single-molecule fluorescence spectroscopy (SMFS) to dissect the different sources of heterogeneity, i.e., chemical heterogeneity and inhomogeneous broadening induced by the nanoenvironment. We demonstrate that the homogeneity of excited-state energy transport in DNA-based photonic wires is dramatically improved by immobilizing photonic wires in aqueous solution without perturbation by the surface. In addition, our study shows that the in situ construction of wire molecules, i.e., the stepwise hybridization of differently labeled oligonucleotides on glass cover slides, further decreases the observed heterogeneity in overall energy-transfer efficiency. The developed strategy enables efficient energy transfer between up to five chromophores in the majority of molecules investigated along a distance of approximately 14 nm. Finally, we used multiparameter SMFS to analyze the energy flow in photonic wires in more detail and to assign residual heterogeneity under optimized conditions in solution to different leakages and competing energy-transfer processes.

DNA↗

Radiative and nonradiative rate fluctuations of single colloidal semiconductor nanocrystals.

Spectrally and time-resolved single-molecule fluorescence spectroscopy was used to investigate fluctuations of the photophysical characteristics of different types of semiconductor nanocrystals (NCs) at room temperature. Correlation of photoluminescence (PL) emission maxima, decay time, and intensity of individual NCs with millisecond time resolution reveals new sources of intensity fluctuations and photophysical properties. In particular, we demonstrate that independent of quenched states spectral diffusion is associated with changes of the radiative rate constant k(r) by means of the quantum-confined Stark effect. Correlation of the different photophysical parameters revealed an intrinsic nonradiative rate and enabled the disentangling of intrinsic and extrinsic nonradiative rate constants. Moreover, it allowed us to assess the PL quantum yield of single NCs. Finally, the presented technique was successfully applied to demonstrate that the addition of antiblinking reagents such as mercaptoethylamine accelerates the observed fluctuations between different photophysical states.

Letter↗

Application of multiline two-photon microscopy to functional in vivo imaging.

High spatial resolution and low risks of photodamage make two-photon laser-scanning microscopy (TPLSM) the method of choice for biological imaging. However, the study of functional dynamics such as neuronal calcium regulation often also requires a high temporal resolution. Hitherto, acquisition speed is usually increased by line scanning, which restricts spatial resolution to structures along a single axis. To overcome this gap between high spatial and high temporal resolution we performed TPLSM with a beam multiplexer to generate multiple laser foci inside the sample. By detecting the fluorescence emitted from these laser foci with an electron-multiplying camera, it was possible to perform multiple simultaneous linescans. In addition to multiline scanning, the array of up to 64 laser beams could also be used in x-y scan mode to collect entire images at high frame rates. To evaluate the applicability of multiline TPLSM to functional in vivo imaging, calcium signals were monitored in visual motion-sensitive neurons in the brain of flies. The capacity of our method to simultaneously acquire signals at different cellular locations is exemplified by measurements at branched neurites and 'spine'-like structures. Calcium dynamics depended on branch size, but 'spines' did not systematically differ from their 'parent neurites'. The spatial resolution of our setup was critically evaluated by comparing it to confocal microscopy and the negative effect of scattering of emission light during image detection was assessed directly by running the setup in both imaging and point-scanning mode.

Animals↗

Direct observation of abortive initiation and promoter escape within single immobilized transcription complexes.

Using total-internal-reflection fluorescence microscopy equipped with alternating-laser excitation, we were able to detect abortive initiation and promoter escape within single immobilized transcription complexes. Our approach uses fluorescence resonance energy transfer to monitor distances between a fluorescent probe incorporated in RNA polymerase (RNAP) and a fluorescent probe incorporated in DNA. We observe small, but reproducible and abortive-product-length-dependent, decreases in distance between the RNAP leading edge and DNA downstream of RNAP upon abortive initiation, and we observe large decreases in distance upon promoter escape. Inspection of population distributions and single-molecule time traces for abortive initiation indicates that, at a consensus promoter, at saturating ribonucleoside triphosphate concentrations, abortive-product release is rate-limiting (i.e., abortive-product synthesis and RNAP-active-center forward translocation are fast, whereas abortive-product dissociation and RNAP-active-center reverse translocation are slow). The results obtained using this new methodology confirm and extend those obtained from diffusing single molecules, and pave the way for real-time, single-molecule observations of the transitions between various states of the transcription complex throughout transcription.

Base Sequence↗

Branching out of single-molecule fluorescence spectroscopy: challenges for chemistry and influence on biology.

In the last decade emerging single-molecule fluorescence-spectroscopy tools have been developed and adapted to analyze individual molecules under various conditions. Single-molecule-sensitive optical techniques are now well established and help to increase our understanding of complex problems in different disciplines ranging from materials science to cell biology. Previous dreams, such as the monitoring of the motility and structural changes of single motor proteins in living cells or the detection of single-copy genes and the determination of their distance from polymerase molecules in transcription factories in the nucleus of a living cell, no longer constitute unsolvable problems. In this Review we demonstrate that single-molecule fluorescence spectroscopy has become an independent discipline capable of solving problems in molecular biology. We outline the challenges and future prospects for optical single-molecule techniques which can be used in combination with smart labeling strategies to yield quantitative three-dimensional information about the dynamic organization of living cells.

Animals↗

Carbocyanine dyes as efficient reversible single-molecule optical switch.

We demonstrate that commercially available unmodified carbocyanine dyes such as Cy5 (usually excited at 633 nm) can be used as efficient reversible single-molecule optical switch, whose fluorescent state after apparent photobleaching can be restored at room temperature upon irradiation at shorter wavelengths. Ensemble photobleaching and recovery experiments of Cy5 in aqueous solution irradiating first at 633 nm, then at 337, 488, or 532 nm, demonstrate that restoration of absorption and fluorescence strongly depends on efficient oxygen removal and the addition of the triplet quencher beta-mercaptoethylamine. Single-molecule fluorescence experiments show that individual immobilized Cy5 molecules can be switched optically in milliseconds by applying alternating excitation at 633 and 488 nm between a fluorescent and nonfluorescent state up to 100 times with a reliability of >90% at room temperature. Because of their intriguing performance, carbocyanine dyes volunteer as a simple alternative for ultrahigh-density optical data storage. Measurements on single donor/acceptor (tetramethylrhodamine/Cy5) labeled oligonucleotides point out that the described light-driven switching behavior imposes fundamental limitations on the use of carbocyanine dyes as energy transfer acceptors for the study of biological processes.

Biotin↗

Design of molecular photonic wires based on multistep electronic excitation transfer.

Light-harvesting complexes, one of nature's supreme examples of nanoscale engineering, have inspired researchers to construct molecular optical devices, such as photonic wires, which are optimised for efficient transfer of excited-state energy over large distances. The control parameters for the design and the advantages of single-molecule fluorescence spectroscopy for the study of such complex systems are discussed with respect to energy-transfer mechanisms, chromophore selection and arrangement as well as static and dynamic heterogeneity.

Journal Article↗

High-resolution colocalization of single molecules within the resolution gap of far-field microscopy.

To obtain detailed information about the three-dimensional (3D) organization of small biomolecular assemblies with a size of less than 100 nanometers, advanced techniques are required that enable the determination of absolute 3D positions and distances between individual fluorophores well below the resolution limit of conventional light microscopy. We show how spectrally resolved fluorescence lifetime imaging microscopy (SFLIM) can provide significant contributions and allow us to determine distances between conventional individual fluorophores (Bodipy 630/650 and Cy5.5) that are less than 20 nm apart. We take advantage of fluorescent dyes (here Cy5.5 and Bodipy 630/650) that can be efficiently excited by a single pulsed diode laser emitting at 635 nm but differ in their fluorescence lifetime and emission maxima. The potential of the method for ultrahigh colocalization studies is demonstrated by measuring the end-to-end distance between single fluorophores separated by double-stranded DNA of various lengths. Combining SFLIM with polarization-modulated excitation allows us to obtain, simultaneously, information about the relative orientation of fluorophores. Furthermore, we show that the environment-dependent photophysics of conventional fluorophores, that is, photostability, blinking pattern, and the tendency to enter irreversible nonfluorescent states, sets certain limitations to their in vitro and in vivo applications.

Algorithms↗

Multistep energy transfer in single molecular photonic wires.

We demonstrate the synthesis and spectroscopic characterization of an unidirectional photonic wire based on four highly efficient fluorescence energy-transfer steps (FRET) between five spectrally different chromophores covalently attached to double-stranded DNA. The DNA-based modular conception enables the introduction of various chromophores at well-defined positions and arbitrary interchromophore distances. While ensemble fluorescence measurements show overall FRET efficiencies between 15 and 30%, single-molecule spectroscopy performed on four spectrally separated detectors easily uncovers subpopulations that exhibit overall FRET efficiencies of up to approximately 90% across a distance of 13.6 nm and a spectral range of approximately 200 nm. Fluorescence trajectories of individual photonic wires show five different fluorescence intensity patterns which can be ascribed to successive photobleaching events.

Journal Article↗

Revealing competitive Forster-type resonance energy-transfer pathways in single bichromophoric molecules.

We demonstrate measurements of the efficiency of competing Förster-type energy-transfer pathways in single bichromophoric systems by monitoring simultaneously the fluorescence intensity, fluorescence lifetime, and the number of independent emitters with time. Peryleneimide end-capped fluorene trimers, hexamers, and polymers with interchromophore distances of 3.4, 5.9, and on average 42 nm, respectively, served as bichromophoric systems. Because of different energy-transfer efficiencies, variations in the interchromophore distance enable the switching between homo-energy transfer (energy hopping), singlet-singlet annihilation, and singlet-triplet annihilation. The data suggest that similar energy-transfer pathways have to be considered in the analysis of single-molecule trajectories of donor/acceptor pairs as well as in natural and synthetic multichromophoric systems such as light-harvesting antennas, oligomeric fluorescent proteins, and dendrimers. Here we report selectively visualization of different energy-transfer pathways taking place between identical fluorophores in individual bichromophoric molecules.

Fluorescence Resonance Energy Transfer↗

Antibunching in the emission of a single tetrachromophoric dendritic system.

The photophysics of a dendrimer containing four chromophores are investigated at the single-molecule level. First, the multichromophoric character of single dendrimers' absorption is probed by modulating the linear polarization of the excitation beam. Subsequently, using circular polarization, the same dendrimers are excited, and their fluorescence transients are recorded. Using pulsed excitation in combination with the classical Hanbury-Brown and Twiss coincidence setup the presented data demonstrate that efficient singlet-singlet annihilation ensures that always only one photon is emitted even when several excitations are generated in an individual multichromophoric molecule.

Journal Article↗

Measuring the number of independent emitters in single-molecule fluorescence images and trajectories using coincident photons.

A simple new approach is described and demonstrated for measuring the number of independent emitters along with the fluorescence intensity, lifetime, and emission wavelength for trajectories and images of single molecules and multichromophoric systems using a single PC plug-in card for time-correlated single-photon counting. The number of independent emitters present in the detection volume can be determined using the interphoton times in a manner similar to classical antibunching experiments. In contrast to traditional coincidence analysis based on pulsed laser excitation and direct measurement of coincident photon pairs using a time-to-amplitude converter, the interphoton distances are retrieved afterward by recording the absolute arrival time of each photon with nanosecond time resolution on two spectrally separated detectors. Intensity changes that result from fluctuations of a photophysical parameter can be distinguished from fluctuations due to changes in the number of emitters (e.g., photobleaching) in single chromophore and multichromophore intensity trajectories. This is the first report to demonstrate imaging with contrast based on the number of independently emitting species within the detection volume.

Journal Article↗

High-resolution colocalization of single dye molecules by fluorescence lifetime imaging microscopy.

Conventional fluorescence microscopy can be used to determine the positions of objects in space when those objects are separated by distances greater than several hundred nanometers, as restricted by the diffraction limit of light. Fluorescence microscopy/spectroscopy based on fluorescence resonance energy-transfer techniques can be used to measure separation distances below approximately 10 nm. To fill the gap between these fundamental limits, we have developed an alternative technique for high-resolution colocalization of fluorescent dyes. The technique is based on fluorescence lifetime imaging. Under favorable conditions, the method can be used to distinguish, and to measure the distance between, two dye molecules that are less than 30 nm apart. To demonstrate the method, lifetime images of a mixture of Cy5 and JF9 (rhodamine derivative) molecules statistically adsorbed on a glass surface were acquired and analyzed. Since these two molecular species differ in fluorescence lifetime (for Cy5, tau(f) = 2.0 ns, and for JF9, tau(f) = 4.0 ns), it is possible to assign the contribution of fluorescence of the two dye types to each image pixel using a pattern recognition technique. Since both dye types can be excited using the same laser wavelength, the measurement is free of chromatic aberrations. The results presented demonstrate the first high-precision distance measurements between single conventional fluorescent dyes based solely on fluorescence lifetime.

Journal Article↗