PubMed Health⌕ Search

Biomedical subjects

Philippe Renaud

Publications and source records attributed to Philippe Renaud.

At least 19 recordsLinked to original sources
PubMed2006

Radical addition to 1,4-benzoquinones: addition at O- versus C-atom.

Addition of alkyl radicals generated from B-alkylcatecholboranes onto 1,4-benzoquinones leads to substituted hydroquinones in good overall yields. Formation of aryl ethers via a unique radical addition to the oxygen atom of the enone system is the main reaction when bulky secondary and tertiary alkyl radicals are used. Less hindered secondary and primary radicals give the expected 1,4-conjugate addition products. [reaction: see text]

Journal Article↗
PubMed2006

Flexible polyimide microelectrode array for in vivo recordings and current source density analysis.

This work presents implantable, flexible polymer-based probes with embedded microelectrodes for acute and chronic neural recordings in vivo, as tested on rodents. Acute recordings using this array were done in mice under urethane anesthesia and compared to those made using silicon-based probes manufactured at the Center for Neural Communication Technology, University of Michigan. The two electrode arrays yielded similar results. Recordings with chronically implanted polymer-based electrodes were performed for 60 days post-surgically in awake, behaving rats. The microelectrodes were used to monitor local field potentials and capture laminar differences in function of cortex and hippocampus, and produced response waveforms of undiminished amplitude and signal-to-noise ratios 8 weeks after chronic implantation. The polymer-based electrodes could also be connected to a lesion current to mark specific locations in the tissue. Current source density (CSD) analysis from the recordings depicted a source - sink-composition. Tissue response was assessed 8 weeks after insertion by immunochemical labeling with glial fibrillary acidic protein (GFAP) to identify astrocytes, and histological analysis showed minimal tissue reaction to the implanted structures.

Animals↗
PubMed2006

Two-dimensional impedance imaging of cell migration and epithelial stratification.

We present a miniaturized impedance imaging system, developed for 2D imaging of cell and tissue culture. The system is based on 16 microelectrodes (5 microm x 4 mm). An equivalent circuit for four-point (tetrapolar) impedance spectra was developed and validated. The system uses an Agilent 4294A impedance analyser combined with a front-end amplifier for the impedance measurements. Human epithelial stem cells (YF 29) were grown on the device surface. Cell migration speeds of 300 nm min(-1) following a "scratch" wound closure assay could be established. Using a commercial software developed for geophysical prospecting, we could generate impedance tomography images at 10 kHz revealing cell migration, increase of epithelial thickness and changes in tissue resistivity over a time course of several days.

Cell Culture Techniques↗
PubMed2006

Total synthesis of the marine alkaloid (+/-)-lepadiformine via a radical carboazidation.

[reaction: see text] The total synthesis of lepadiformine has been achieved in 10 steps and 15% overall yield from cyclohexanone. The amino-substituted quaternary carbon center is created through a radical carboazidation reaction. The tricyclic core of lepadiformine is built via an efficient hydrogenation process, involving reduction of the azide and intramolecular reductive amination of a ketone, followed by lactamization of the intermediate gamma-aminoester. The hydroxymethyl side chain is introduced according to a modified Takahata procedure after conversion of the lactam into a thiolactam.

Alkaloids↗
PubMed2006

Bipolar resistivity profiling of 3D tissue culture.

We describe a new low-cost technique for continuous monitoring of the thickness of biofilms and tissue cultures, and we demonstrate the advantage of using electrodes of different dimensions to probe different depths of a sample. We have used electric impedance spectroscopy to monitor keratinocyte stem cells (YF29) growing on an array of Ti/Pt coplanar microelectrodes. The thickness of the sample was reconstructed by fitting the measurements to theoretical curves. We have developed an algorithm for the rapid calculation of the resistance through a multilayered sample. This algorithm is based on conformal mapping and the serial partial capacitance technique. The validity of the technique was tested by measuring the sedimentation rate of an alumina powder. Sample thicknesses between 10 and 80 microm could be measured with a resolution of a few microns using the device.

Biological Assay↗
PubMed2006

On-chip extrusion of lipid vesicles and tubes through microsized apertures.

In this work we present the formation of micrometre-sized lipid vesicles and tubes with perfectly homogeneous diameter and extraordinary length. The method is a novel approach for unconventional fabrication of soft-matter microstructured devices based on the combination of top-down and bottom-up fabrication processes. Photolithography techniques are applied to fabricate microsized apertures that provide the requirements to form lipid structures with predictable size and to align and guide the vesicles and tubes in microstructured channels. The formation is facilitated by self-assembly of polar lipids to a lipid membrane that is afterwards forced to undergo a shape transformation by extrusion through a microsized aperture. Both the geometrical restriction by the small aperture and the pressure difference between the top and bottom sides of the aperture determine the form and length of the vesicles and tubes. A strong pressure difference favors the formation of lipid tubes, while a low pressure difference results in the formation of vesicle bunches with spherical and cylindrical shapes. Potential applications for the formed lipid structures could be as microreactors and transport channels as well as in the construction of flexible microfluidic networks.

Dimethylpolysiloxanes↗
PubMed2006

pH-controlled diffusion of proteins with different pI values across a nanochannel on a chip.

Electrostatic interactions dominate the diffusion of proteins in a nanochannel, which was measured and modeled for pH values above and below the isoelectric points of three lectin proteins. Maximal diffusion coefficients were obtained when the proteins were neutral at their pI. This pH-controlled transport led to a separation of biomolecules across the nanochannel. A pI shift was observed, due to reversible adsorption of proteins on the walls, which affects the pH in the nanochannel.

Diffusion↗
PubMed2005

Highly diastereoselective formation of spirocyclic compounds via 1,5-hydrogen transfer: a total synthesis of (-)-erythrodiene.

[reaction: see text] A highly stereoselective synthesis of (-)-erythrodiene starting from 4-isopropylcyclohexanone is described. The key reactions are an asymmetric methoxycarbonylation of the starting ketone and a highly diastereoselective radical cascade involving addition of a phenylthiyl radical to a terminal alkyne followed by a 1,5-hydrogen transfer and a 5-exo-cyclization.

Chlorobenzenes↗
PubMed2005

Multimillimetre-large superlattices of air-stable iron-cobalt nanoparticles.

Self-organization of nanoparticles into two- and three-dimensional superlattices on a large scale is required for their implementation into nano- or microelectronic devices. This is achieved, generally after a size-selection process, through spontaneous self-organization on a surface, layer-by-layer deposition or the three-layer technique of oversaturation, but these techniques consider superlattices of limited size. An alternative method developed in our group involves the direct formation in solution of crystalline superlattices, for example of tin nanospheres, iron nanocubes or cobalt nanorods, but these are also of limited size. Here, we report the first direct preparation in solution of multimillimetre-sized three-dimensional compact superlattices of nanoparticles. The 15-nm monodisperse FeCo particles adopt an unusual short-range atomic order that transforms into body-centred-cubic on annealing at 500 degrees C. The latter process produces an air-stable material with magnetic properties suitable for radiofrequency applications.

Air↗
PubMed2005

Total synthesis of hyacinthacine A1 and 3-epi-hyacinthacine A1.

[reaction: see text] Total synthesis of hyacinthacine A(1) and its epimer at C3 is described. The synthesis includes a stereocontrolled carboazidation of a chiral allylsilane as a key step. C-Si bond oxidation and reduction of the azide, with ring-closure, complete the total synthesis, which establishes the absolute configuration of 3.

Cyclization↗
PubMed2005

Gentle cell trapping and release on a microfluidic chip by in situ alginate hydrogel formation.

Microfluidic devices are increasingly used to perform biological experiments on a single-cell basis. However, long-term stability of cell positions is still an issue. A novel biocompatible method for cell entrapment and release on a microchip is presented. It is based on the controlled formation of an alginate hydrogel by bringing two laminar flows of alginate and calcium ions in the range of 2 mM to 40 mM into contact. The resulting growth of a gel bar is used to enclose and immobilize yeast cells. Adding ethylenediaminetetraacetic acid (EDTA) to the alginate solution allows for control of the hydrogel growth, and by varying the ratio of Ca(2+) to EDTA concentrations gel growth or gel shrinkage can be induced at will. Trapped cells are released during shrinkage of the gel. The trapping efficiency for different cell speeds is investigated and the properties of gel growth are discussed using a diffusion model. Precise positioning of a single cell is demonstrated. The technique presented allows not only the reversible immobilization of cells under gentle conditions but also offers the potential of long-term cell cultures as shown by on-chip incubation of yeast cells. The procedure may provide a simple and fully biocompatible technique for a multitude of innovative experiments on cells in microsystems.

Alginates↗
PubMed2005

Impedance spectroscopy flow cytometry: on-chip label-free cell differentiation.

BACKGROUND: The microfabricated impedance spectroscopy flow cytometer used in this study permits rapid dielectric characterization of a cell population with a simple microfluidic channel. Impedance measurements over a wide frequency range provide information on cell size, membrane capacitance, and cytoplasm conductivity as a function of frequency. The amplitude, opacity, and phase information can be used for discrimination between different cell populations without the use of cell markers. METHODS: Polystyrene beads, red blood cells (RBCs), ghosts, and RBCs fixed in glutaraldehyde were passed through a microfabricated flow cytometer and measured individually by using two simultaneously applied discrete frequencies. The cells were characterized at 1,000 per minute in the frequency range of 350 kHz to 20 MHz. RESULTS: Cell size was easily measured with submicron accuracy. Polystyrene beads and RBCs were differentiated using opacity. RBCs and ghosts were differentiated using phase information, whereas RBCs and fixed RBCs were differentiated using opacity. RBCs fixed using increasing concentrations of glutaraldehyde showed increasing opacity. This increased opacity was linked to decreased cytoplasm conductivity and decreased membrane capacitance, both resulting from protein cross-linking. CONCLUSIONS: This work presents label-free differentiation of cells in an on-chip flow cytometer based on impedance spectroscopy, which will be a powerful tool for cell characterization.

Cell Differentiation↗
PubMed2005

Temperature measurements in microfluidic systems: heat dissipation of negative dielectrophoresis barriers.

The manipulation of living biological cells in microfluidic channels by a combination of negative dielectrophoretic barriers and pressure-driven flows is widely employed in lab-on-a-chip systems. However, electric fields in conducting media induce Joule heating. This study investigates if the local temperatures reached under typical experimental conditions in miniaturized systems cause a potential risk for hyperthermic stress or cell damage. Two methods of optical in situ temperature detection have been tested and compared: (i) the exposure of the thermo-dependent fluorescent dye Rhodamine B to heat sources situated in microfluidic channels, and (ii) the use of thermoprecipitating N-alkyl-substituted acrylamide polymers as temperature threshold probes. Two-dimensional images of temperature distributions in the vicinity of active negative dielectrophoresis (nDEP)-barriers have been obtained and local temperature variations of more than 20 degrees C have been observed at the electrode edges. Heat propagation via both buffer and channel walls lead to significant temperature increases within a perimeter of 100 microm and more. These data indicate that power dissipation has to be taken into account when experiments at physiological temperatures are planned.

Cell Physiological Phenomena↗
PubMed2005

Ionic transport phenomena in nanofluidics: experimental and theoretical study of the exclusion-enrichment effect on a chip.

In nanometer-sized apertures with charged surfaces, the extension of the electrical double layer results in the electrostatic exclusion of co-ions and enrichment in counterions, which affects the permselectivity of such structures. A modeling of this phenomenon is proposed and is compared with quantitative measurements of the ionic permeability change of a Pyrex nanoslit at low ionic strength. The comparison of experimental results with theoretical predictions justifies that electrostatic forces are the governing forces in nanofluidics.

Journal Article↗