Biomedical subjects

Pinjing Zhao

Publications and source records attributed to Pinjing Zhao.

8 recordsLinked to original sources

PubMed2006

Carbon-oxygen bond formation between a terminal alkoxo ligand and a coordinated olefin. Evidence for olefin insertion into a rhodium alkoxide.

Preparation and reactivity of a series of bis(phosphine) rhodium(I) alkoxides stabilized by intramolecular olefin coordination are reported. {Rh(PEt3)2[kappa1:eta2-OCRR'(CH2)nCH=CH2]} (n = 1, 2) were prepared via alcoholysis of {Rh(PEt3)2[N(SiMe3)2]} by the corresponding alcohols HOCRR'(CH2)nCH=CH2. The in situ generated {Rh(PEt3)2[kappa1:eta2-OCRR'(CH2)2CH=CH2]} were not stable at ambient temperatures and decomposed in the presence of added PEt3 to afford 2,2-disubstituted-5-methylenetetrahydrofurans and [(PEt3)4Rh-H] in good to high yields. Kinetic and deuterium labeling results support a syn-oxyrhodation pathway via direct olefin insertion into a Rh-O bond, followed by rapid beta-hydride elimination. In comparison, {Rh(PEt3)2[kappa1:eta2-OCRR'CH2CH=CH2]} are isolated as stable crystals, and the Rh-olefin interactions are evidenced by an X-ray structure. Heating of these complexes generated [Rh(PEt3)2(eta2-allyl)] and the corresponding ketones in high yields following an apparent beta-allyl elimination pathway.

Journal Article↗

PubMed2006

Direct observation of beta-aryl eliminations from Rh(I) alkoxides.

beta-Aryl eliminations from a series of rhodium(I) alkoxides to form rhodium aryl complexes and free ketones are reported. Tertiary phenylmethoxide complexes [Rh(PEt3)n(OCPhRR')] (n = 2, 3) were prepared via alcoholysis of {Rh(PEt3)2[N(SiMe3)2} by the corresponding alcohols HOCPhRR' in the presence and absence of added PEt3. Heating of these complexes in the presence of added PEt3 generated the rhodium phenyl complex, (PEt3)3RhPh, and the corresponding ketones in good to high yields. Kinetic results are most consistent with irreversible beta-phenyl elimination from a bisphosphine-ligated rhodium alkoxide complex. Such bisphosphine complexes result from ligand dissociation from the trisphosphine complexes and have been isolated in some cases. The bisphosphine complexes are stabilized by Rh-Cphenyl interactions, as evidenced by an X-ray structure, and this structure with a metal-aryl interaction likely illustrates the pathway for C-C bond cleavage.

Journal Article↗

PubMed2005

Transfer of amido groups from isolated rhodium(I) amides to alkenes and vinylarenes.

The reaction of monomeric and dimeric rhodium(I) amido complexes with unactivated olefins to generate imines is reported. Transamination of {(PEt(3))(2)RhN(SiMePh(2))(2)} (1a) or its -N(SiMe(3))(2) analogue 1b with p-toluidine gave the dimeric [(PEt(3))(2)Rh(mu-NHAr)](2) (Ar = p-tolyl) (2a) in 80% isolated yield. Reaction of 2a with PEt(3) generated the monomeric (PEt(3))(3)Rh(NHAr) (Ar = p-tolyl) (3a). PEt(3)-ligated arylamides 2a and 3a reacted with styrene to transfer the amido group to the olefin and to form the ketimine Ph(Me)C=N(p-tol) (4a) in 48-95% yields. The dinuclear amido hydride (PEt(3))(4)Rh(2)(mu-NHAr)(mu-H) (Ar = p-tolyl) (5a) was formed from reaction of 2a in 95% yield, and a mixture of this dimeric species and the (PEt(3))(n)RhH complexes with n = 3 and 4 was formed from reaction of 3a in a combined 75% yield. Propene reacted with 2a to give Me(2)C=N(p-tol) (4b) and 5a in 90 and 57% yields. Propene also reacted with 3a to give 4b and 5a in 65 and 94% yields. Analogues of 2a and 3a with varied electronic properties also reacted with styrene to form the corresponding imines, and moderately faster rates were observed for reactions of electron-rich arylamides. Kinetic studies of the reaction of 3a with styrene were most consistent with formation of the imine by migratory insertion of olefin into the rhodium-amide bond to generate an aminoalkyl intermediate that undergoes beta-hydrogen elimination to generate a rhodium hydride and an enamine that tautomerizes to the imine.

Journal Article↗

PubMed2005

Beta-aryl eliminations from Rh(I) iminyl complexes.

beta-Aryl eliminations from a series of iminyl complexes to form rhodium aryl complexes and free nitriles are reported. Iminyl complexes [Rh(PEt3)3(N=CArAr')] were prepared from [Rh(COE)Cl]2, PEt3, LiN(SiMe3)2, and the imines HN=CArAr'. One example of these complexes was characterized by X-ray diffraction. Heating of these complexes in cyclohexane generated the rhodium aryl complexes and free nitriles in high yields; heating in benzene formed the same products in slightly lower yields. Complexes with varied aryl groups on the imine were studied to assess the migratory aptitudes of the aryl groups. Migration of the o-anisyl group occurred much faster than migration of a phenyl group; migration of a phenyl group occurred slightly faster than migration of the more electron-rich p-anisyl group; and migration of a phenyl group occurred slightly faster than migration of the more hindered o-tolyl group. Kinetic studies showed that the reaction was inverse first-order in the concentration of added phosphine and zero-order in added nitrile. These results show that the beta-aryl elimination most likely occurs by dissociation of phosphine from the starting complex and carbon-carbon bond cleavage of the resulting 14-electron intermediate.

Crystallography, X-Ray↗

PubMed2004

Reaction of ketones with lithium hexamethyldisilazide: competitive enolizations and 1,2-additions.

Reaction of 2-methylcyclohexanone with lithium hexamethyldisilazide (LiHMDS, TMS(2)NLi) displays highly solvent-dependent chemoselectivity. LiHMDS in THF/toluene effect enolization. Rate studies using in situ IR spectroscopy are consistent with a THF concentration-dependent monomer-based pathway. LiHMDS in pyrrolidine/toluene affords exclusively 1,2-addition of the pyrrolidine fragment to form an alpha-amino alkoxide-LiHMDS mixed dimer shown to be a pair of conformers by using (6)Li, (15)N, and (13)C NMR spectroscopies. Rate studies are consistent with a monomer-based transition structure [(TMS(2)NLi)(ketone)(pyrrolidine)(3)](). The partitioning between enolization and 1,2-addition is kinetically controlled.

Alkenes↗

PubMed2004

Lithium hexamethyldisilazide-mediated ketone enolization: the influence of hindered dialkyl ethers and isostructural dialkylamines on reaction rates and mechanisms.

Mechanistic studies of the enolization of 2-methylcyclohexanone mediated by lithium hexamethyldisilazide (LiHMDS; TMS(2)NLi) solvated by hindered dialkyl ethers (ROR') are described. Rate studies using in situ IR spectroscopy show that enolizations in the presence of i-Pr(2)O, 2,2,5,5-tetramethyltetrahydrofuran, and cineole proceed via dimer-based transition structures [(TMS(2)NLi)(2)(ROR')(ketone)]. Comparing the relative solvation energies and the corresponding solvent-dependent activation energies shows that the highly substituted ethers accelerate the enolizations by sterically destabilizing the reactants and stabilizing the transition structures. Comparisons of hindered dialkyl ethers with their isostructural dialkylamines reveal that the considerably higher rates elicited by the amines derive from an analogous relative destabilization of the reactants and relative stabilization of the transition structures.

Ketones↗

PubMed2003

Ketone enolization by lithium hexamethyldisilazide: structural and rate studies of the accelerating effects of trialkylamines.

Mechanistic studies of the enolization of 2-methylcyclohexanone mediated by lithium hexamethyldisilazide (LiHMDS; TMS2NLi) in toluene and toluene/amine mixtures are described. NMR spectroscopic studies of LiHMDS/ketone mixtures in toluene reveal the ketone-complexed cyclic dimer (TMS2NLi)2(ketone). Rate studies using in situ IR spectroscopy show the enolization proceeds via a dimer-based transition structure, [(TMS2NLi)2(ketone)]++. NMR spectroscopic studies of LiHMDS/ketone mixtures in the presence of relatively unhindered trialkylamines such as Me2NEt reveal the quantitative formation of cyclic dimers of general structure (TMS2NLi)2(R3N)(ketone). Rate studies trace a >200-fold rate acceleration to a dimer-based transition structure, [(TMS2NLi)2(R3N)(ketone)]++. Amines of intermediate steric demand, such as Et3N, are characterized by recalcitrant solvation, saturation kinetics, and exceptional (>3000-fold) accelerations traced to the aforementioned dimer-based pathway. Amines of high steric demand, such as i-Pr2NEt, do not observably solvate (TMS2NLi)2(ketone) but mediate enolization via [(TMS2NLi)2(R3N)(ketone)]++ with muted accelerations. The most highly hindered amines, such as i-Bu3N, do not influence the LiHMDS structure or the enolization rate. Overall, surprisingly complex dependencies of the enolization rates on the structures and concentrations of the amines derive from unexpectedly simple steric effects. The consequences of aggregation, mixed aggregation, and substrate-base precomplexation are discussed.

Amines↗

PubMed2003

Lithium hexamethyldisilazide/triethylamine-mediated ketone enolization: remarkable rate accelerations stemming from a dimer-based mechanism.

Mechanistic studies of the enolization of 2-methylcyclohexanone mediated by lithium hexamethyldisilazide (LiHMDS; TMS2NLi) in toluene and toluene/triethylamine (Et3N) mixtures are described. Structural studies of LiHMDS/ketone mixtures in toluene reveal cyclic dimer (TMS2NLi)2(ketone). Rate studies using in situ IR spectroscopy show the enolization proceeds via a dimer-based transition structure, [(TMS2NLi)2(ketone)]. NMR spectroscopic studies of LiHMDS/ketone mixtures in the presence of relatively unhindered trialkylamines such as Me2NEt reveal the quantitative formation of cyclic dimers of general structure (TMS2NLi)2(Et3N)(ketone). Rate studies trace a >3000-fold rate acceleration to a dimer-based transition structure, [(TMS2NLi)2(Et3N)(ketone)].

Dimerization↗