PubMed Health⌕ Search

Biomedical subjects

Preston B Moore

Publications and source records attributed to Preston B Moore.

11 recordsLinked to original sources
PubMed2006

Structural characterization of interfacial n-octanol and 3-octanol using molecular dynamic simulations.

Structurally isomeric octanol interfacial systems, water/vapor, 3-octanol/vapor, n-octanol/vapor, 3-octanol/water, and n-octanol/water are investigated at 298 K using molecular dynamics simulation techniques. The present study is intended to investigate strongly associated liquid/liquid interfaces and probe the atomistic structure of these interfaces. The octanol and water molecules were initially placed randomly into a box and were equilibrated using constant pressure techniques to minimize bias within the initial conditions as well as to fully sample the structural conformations of the interface. An interface formed via phase separation during equilibration and resulted in a slab geometry with a molecularly sharp interface. However, some water molecules remained within the octanol phase with a mole fraction of 0.12 after equilibration. The resulting "wet" octanol interfaces were analyzed using density profiles and orientational order parameters. Our results support the hypothesis of an ordered interface only 1 or 2 molecular layers deep before bulk properties are reached for both the 3-octanol and water systems. However, in contrast to most other interfacial systems studied by molecular dynamics simulations, the n-octanol interface extends for several molecular layers. The octanol hydroxyl groups form a hydrogen-bonding network with water which orders the surface molecules toward a preferred direction and produces a hydrophilic/hydrophobic layering. The ordered n-octanol produces an oscillating low-high density of oxygen atoms out of phase with a high-low density of carbon atoms, consistent with an oscillating dielectric. In contrast, the isomeric 3-octanol has only a single carbon-rich layer directly proximal to the interface, which is a result of the different molecular topology. Both 3-octanol and n-octanol roughen the water interface with respect to the water/vapor interface. The "wet" octanol phases, in the octanol/water systems reach bulk properties in a shorter distance than the "dry" octanol/vapor interfaces.

1-Octanol↗
PubMed2006

Molecular dynamics simulations of surfactant self-organization at a solid-liquid interface.

Self-organization of aqueous surfactants at a planar graphite-like surface is studied by means of coarse-grain molecular dynamics simulations. The nonionic surfactant, n-alkyl poly(ethylene oxide), and water are both represented by coarse-grain models while an implicit representation is used for the graphite surface. The observed morphology of the aggregated surfactants depends on the alkyl chain length. Surfactants with a short chain form a monolayer on the graphite surface with a thickness roughly equal to that of the alkane tail. On the other hand, longer-tail surfactants form continuous hemicylinders on the surface with diameter approximately 5.0 +/- 0.5 nm, in good agreement with experimental AFM data.

Adsorption↗
PubMed2005

A theoretical description of the polarization dependence of the sum frequency generation spectroscopy of the water/vapor interface.

An improved time correlation function (TCF) description of sum frequency generation (SFG) spectroscopy was developed and applied to theoretically describing the spectroscopy of the ambient water/vapor interface. A more general TCF expression than was published previously is presented-it is valid over the entire vibrational spectrum for both the real and imaginary parts of the signal. Computationally, earlier time correlation function approaches were limited to short correlation times that made signal processing challenging. Here, this limitation is overcome, and well-averaged spectra are presented for the three independent polarization conditions that are possible for electronically nonresonant SFG. The theoretical spectra compare quite favorably in shape and relative magnitude to extant experimental results in the O-H stretching region of water for all polarization geometries. The methodological improvements also allow the calculation of intermolecular SFG spectra. While the intermolecular spectrum of bulk water shows relatively little structure, the interfacial spectra (for polarizations that are sensitive to dipole derivatives normal to the interface--SSP and PPP) show a well-defined intermolecular mode at 875 cm(-1) that is comparable in intensity to the rest of the intermolecular structure, and has an intensity that is approximately one-sixth of the magnitude of the intense free O-H stretching peak. Using instantaneous normal mode methods, the resonance is shown to be due to a wagging mode localized on a single water molecule, almost parallel to the interface, with two hydrogens displaced normal to the interface, and the oxygen anchored in the interface. We have also uncovered the origin of another intermolecular mode at 95 cm(-1) for the SSP and PPP spectra, and at 220 cm(-1) for the SPS spectra. These resonances are due to hindered translations perpendicular to the interface for the SSP and PPP spectra, and translations parallel to the interface for the SPS spectra. Further, by examining the real and imaginary parts of the SFG signal, several resonances are shown to be due to a single spectroscopic species while the "donor" O-H region is shown to consist of three distinct species-consistent with an earlier experimental analysis.

Journal Article↗
PubMed2005

Identification of a wagging vibrational mode of water molecules at the water/vapor interface.

An improved time correlation function description of sum frequency generation (SFG) spectroscopy was applied to theoretically describe the water/vapor interface. The resulting spectra compare favorably in shape and relative magnitude to extant experimental results in the O-H stretching region of water. Further, the SFG spectra show a well-defined intermolecular mode at 875 cm(-1) that has significant intensity. The resonance is due to a wagging mode localized on a single water molecule. It represents a well-defined population of water molecules at the interface that, along with the free O-H modes, represent the dominant interfacial species.

Journal Article↗
PubMed2005

Lipid bilayer perturbations around a transmembrane nanotube: a coarse grain molecular dynamics study.

The perturbations induced in a lipid bilayer by the presence of a transmembrane nanotube are investigated using coarse grained molecular dynamics. Meniscus formation by the lipids and tilting of the nanotube occur in response to hydrophobic mismatch, although these two effects do not compensate completely for the total mismatch. The lipid head-to-tail vector field is examined and shows strong ordering in the membrane plane regardless of the nanotube length. Molecular layering at the lipid-nanotube interface is reported. This study extends previous theoretical approaches to a more realistic setting.

Biophysical Phenomena↗
PubMed2005

Structure and dynamics of model pore insertion into a membrane.

A cylindrical transmembrane molecule is constructed by linking hydrophobic sites selected from a coarse grain model. The resulting hollow tube assembly serves as a representation of a transmembrane channel, pore, or a carbon nanotube. The interactions of a coarse grain di-myristoyl-phosphatidyl-choline hydrated bilayer with both a purely hydrophobic tube and a tube with hydrophilic caps are studied. The hydrophobic tube rotates in the membrane and becomes blocked by lipid tails after a few tens of nanoseconds. The hydrophilic sites of the capped tube stabilize it by anchoring the tube in the lipid headgroup/water interfacial region of each membrane leaflet. The capped tube remains free of lipid tails. The capped tube spontaneously conducts coarse grain water sites; the free-energy profile of this process is calculated using three different methods and is compared to the barrier for water permeation through the lipid bilayer. Spontaneous tube insertion into an undisturbed lipid bilayer is also studied, which we reported briefly in a previous publication. The hydrophobic tube submerges into the membrane core in a carpetlike manner. The capped tube laterally fuses with the closest leaflet, and then, after plunging into the membrane interior, rotates to assume a transbilayer orientation. Two lipids become trapped at the end of the tube as it penetrates the membrane. The hydrophilic headgroups of these lipids associate with the lower tube cap and assist the tube in crossing the interior of the membrane. When the rotation is complete these lipids detach from the tube caps and fuse with the lower leaflet lipids.

Binding Sites↗
PubMed2004

Understanding nature's design for a nanosyringe.

Synthetic and natural peptide assemblies can possess transport or conductance activity across biomembranes through the formation of nanopores. The fundamental mechanisms of membrane insertion necessary for antimicrobial or synthetic pore formation are poorly understood. We observe a lipid-assisted mechanism for passive insertion into a model membrane from molecular dynamics simulations. The assembly used in the study, a generic nanotube functionalized with hydrophilic termini, is assisted in crossing the membrane core by transleaflet lipid flips. Lipid tails occlude a purely hydrophobic nanotube. The observed insertion mechanism requirements for hydrophobic-hydrophilic matching have implications for the design of synthetic channels and antibiotics.

Biosensing Techniques↗
PubMed2004

Transmembrane peptide-induced lipid sorting and mechanism of Lalpha-to-inverted phase transition using coarse-grain molecular dynamics.

Molecular dynamics results are presented for a coarse-grain model of 1,2-di-n-alkanoyl-sn-glycero-3-phosphocholine, water, and a capped cylindrical model of a transmembrane peptide. We first demonstrate that different alkanoyl-length lipids are miscible in the liquid-disordered lamellar (Lalpha) phase. The transmembrane peptide is constructed of hydrophobic sites with hydrophilic caps. The hydrophobic length of the peptide is smaller than the hydrophobic thickness of a bilayer consisting of an equal mixture of long and short alkanoyl tail lipids. When incorporated into the membrane, a meniscus forms in the vicinity of the peptide and the surrounding area is enriched in the short lipid. The meniscus region draws water into it. In the regions that are depleted of water, the bilayers can fuse. The lipid headgroups then rearrange to solvate the newly formed water pores, resulting in an inverted phase. This mechanism appears to be a viable pathway for the experimentally observed Lalpha-to-inverse hexagonal (HII) peptide-induced phase transition.

Computer Simulation↗
PubMed2003

A molecular dynamics method for calculating molecular volume changes appropriate for biomolecular simulation.

Photothermal methods permit measurement of molecular volume changes of solvated molecules over nanosecond timescales. Such experiments are an important tool in investigating complex biophysical phenomena including identifying transient species in solution. Developing a microscopic understanding of the origin of volume changes in the condensed phase is needed to complement the experimental measurements. A molecular dynamics (MD) method exploiting available simulation methodology is demonstrated here that both mimics experimental measurements and provides microscopic resolution to the thermodynamic measurements. To calculate thermodynamic volume changes over time, isothermal-isobaric (NPT) MD is performed on a solution for a chosen length of time and the volume of the system is thus established. A further simulation is then performed by "plucking" out a solute molecule of interest to determine the volume of the system in its absence. The difference between these volumes is the thermodynamic volume of the solute molecule. NPT MD allows the volume of the system to fluctuate over time and this results in a statistical uncertainty in volumes that are calculated. It is found in the systems investigated here that simulations lasting a few nanoseconds can discern volume changes of approximately 1.0 ml/mole. This precision is comparable to that achieved empirically, making the experimental and theoretical techniques synergistic. The technique is demonstrated here on model systems including neat water, both charged and neutral aqueous methane, and an aqueous beta-sheet peptide.

Algorithms↗
PubMed2002

Molecular dynamics investigation of membrane-bound bundles of the channel-forming transmembrane domain of viral protein U from the human immunodeficiency virus HIV-1.

Molecular dynamics (MD) simulations have been carried out on bundles of the channel-forming transmembrane (TM) domain of the viral protein U (VPU(1-27) and VPU(6-27)) from the human immunodeficiency virus (HIV-1). Simulations of hexameric and pentameric bundles of VPU(6-27) in an octane/water membrane mimetic system suggested that the pentamer is the preferred oligomer. Accordingly, an unconstrained pentameric helix bundle of VPU(1-27) was then placed in a hydrated palmitoyl-oleyl-3-n-glycero-phosphatidylethanolamine (POPE) lipid bilayer and its structural properties calculated from a 3-ns MD run. Some water molecules, initially inside the channel lumen, were expelled halfway through the simulation and the bundle adopted a conical structure reminiscent of previous MD results obtained for VPU(6-27) in an octane/water system. The pore constriction generated may correspond to a closed state of the channel and underlies the relocation of the W residue toward the pore lumen. The relative positions of the helices with respect to the bilayer and their interactions with the lipids are discussed. The observed structure is stabilized via specific interactions between the VPU helices and the carbonyl oxygen atoms of the lipid molecules, particularly at the Q and S residues.

Carbon↗