PubMed Health⌕ Search

Biomedical subjects

R A Gross

Publications and source records attributed to R A Gross.

At least 19 recordsLinked to original sources

Increased mitotic activity in the dentate gyrus of the hippocampus of adult C57BL/6J mice exposed to the flurothyl kindling model of epileptogenesis.

Repeated flurothyl-induced generalized forebrain seizures result in a progressive and permanent lowering of the generalized seizure threshold in mice and an increase in the percentage of animals expressing forebrain-brainstem seizures, when rechallenged with flurothyl, after a stimulation-free period. Since this seizure paradigm serves as an excellent model for examining changes in seizure threshold and seizure propagation, we were interested in examining mitotic activity in hippocampal progenitors following flurothyl-induced epileptogenesis. In the present studies, we investigated (1). the effect of one or eight flurothyl-induced seizures on mitotic activity in the hippocampal dentate gyrus of adult mice measured by 5-bromo-2'-deoxyuridine incorporation, (2). the time course of change in hippocampal mitotic activity, (3). the cellular phenotype of these mitotically active cells, and (4). the relationship of changes in mitotic activity to changes in seizure threshold and phenotype. Significant increases in hippocampal mitotic activity were observed in mice exposed to either one or eight flurothyl-induced seizures. Increases were observed at 1 and 3 days following one seizure, and at 0, 1, 3, and 7 days following eight seizures. Confocal analyses, using neuronal and glial markers, suggest that the majority of these mitotic cells are neurons. In addition, no correlation was observed between hippocampal mitotic activity and the final seizure type that animals expressed following incubation and flurothyl retest. A significant correlation was observed between hippocampal mitotic activity and seizure threshold in flurothyl-kindled mice. Overall, these results indicate that both one and eight flurothyl-induced seizures are potent inducers of hippocampal neurogenesis in adult mice. Results further suggest that the increases in hippocampal neurogenesis are not directly related to the processes that underlie the shift in behavioral seizure phenotype, but may be involved in either the establishment or the maintenance of seizure threshold in this flurothyl model of epileptogenesis.

Animals↗

Evidence that a protein-protein interaction 'hot spot' on heterotrimeric G protein betagamma subunits is used for recognition of a subclass of effectors.

To understand the requirements for binding to G protein betagamma subunits, phage-displayed random peptide libraries were screened using immobilized biotinylated betagamma as the target. Selected peptides were grouped into four different families based on their sequence characteristics. One group (group I) had a clear conserved motif that has significant homology to peptides derived from phospholipase C beta (PLC beta) and to a short motif in phosducin that binds to G protein beta subunits. The other groups had weaker sequence homologies or no homology to the group I sequences. A synthetic peptide from the strongest consensus group blocked activation of PLC by G protein betagamma subunits. The peptide did not block betagamma-mediated inhibition of voltage-gated calcium channels and had little effect on betagamma-mediated inhibition of Gs-stimulated type I adenylate cyclase. Competition experiments indicated that peptides from all four families bound to a single site on betagamma. These peptides may bind to a protein-protein interaction 'hot spot' on the surface of betagamma subunits that is used by a subclass of effectors.

Amino Acid Sequence↗

Polyester and polycarbonate synthesis by in vitro enzyme catalysis.

Enzyme technology has significantly expanded in scope and impact over the past 10 years to include organic transformations in non-traditional environments. This is in part due to an increased understanding and capability of using enzyme catalysis in a wide variety of organic solvents, at interfaces, and at high temperatures and pressures. This review focuses on a relatively new but rapidly expanding research activity where in vitro enzyme catalysis is used for the synthesis of non-natural polyesters and polycarbonates. The inclination to use of enzymes for polymer synthesis has been fueled by a desire to carry out these reactions in the absence of heavy metals, at lower temperatures, and with increased selectivity. Aspects of this work that include enzyme-catalyzed step-growth condensation reactions, chain-growth ring-opening polymerizations, and corresponding transesterification of macromolecular substrates are discussed.

Acylation↗

Direct incorporation of glucosamine and N-acetylglucosamine into exopolymers by Gluconacetobacter xylinus (=Acetobacter xylinum) ATCC 10245: production of chitosan-cellulose and chitin-cellulose exopolymers.

Gluconacetobacter xylinus (=Acetobacter xylinum) ATCC 10245 incorporated 2-amino-2-deoxy-D-glucose (glucosamine) and 2-acetamido-2-deoxy-D-glucose (N-acetylglucosamine), but not 3-O-methyl-D-glucose or 2-deoxy-D-glucose into exopolymers. Incorporation was confirmed by gas chromatography with and without mass spectrometry, Fourier transform infrared, and 1H nuclear magnetic resonance. The average molar percentage of glucosamine and N-acetylglucosamine in the exopolymers was about 18%.

Acetylglucosamine↗

Poly(3-hydroxybutyrate)-depolymerase from Pseudomonas lemoignei: catalysis of esterifications in organic media.

Lipase catalysis in nonaqueous media is recognized as a powerful tool in organic and more recently polymer synthesis. Even though none of the currently known polyhydroxyalkanoate (PHA) depolymerases have lipase activity, they do have a catalytic center that resembles that of lipases. Motivated by the above, the potential of using the poly(3-hydroxybutyrate), PHB, depolymerase from Psuedomonas lemoignei in organic media to catalyze ester-forming reactions was investigated. The effect of different organic solvents (benzene-d(6), cyclohexane-d(12), and acetonitrile-d(3)) on the activity of the PHB-depolymerase toward propylation of L-lactide was studied. A significant difference in the catalytic rate was observed as a function of solvent polarity. The selectivity of the PHB-depolymerase (P. lemoignei) to catalyze the propylation of a series of different lactones including epsilon-caprolactone, delta-butyrolactone, gamma-butyrolactone, and D, L, meso, and racemic lactides has been studied with the PHB-depolymerase (P. lemoignei) in organic solvents. Important differences in the reactivity of these lactones, as well as selective hydrolysis of stereochemically different linear lactic acid dimers, were observed. Moreover, the ability of the PHB-depolymerase to catalyze the solventless polymerization of epsilon-caprolactone and trimethylene carbonate was investigated.

Carboxylic Ester Hydrolases↗

Horseradish peroxidase mediated free radical polymerization of methyl methacrylate.

This paper reports the free radical polymerization of methyl methacrylate (MMA) catalyzed by horseradish peroxidase (HRP). A novel method was developed whereby MMA polymerization can be carried out at ambient temperatures in the presence of low concentrations of hydrogen peroxide and 2,4-pentanedione in a mixture of water and a water-miscible solvent. Polymers of MMA formed were highly stereoregular with predominantly syndiotactic sequences (syn-dyad fractions from 0.82 to 0.87). Analyses of the chloroform-soluble fraction of syndio-PMMA products by GPC showed that they have number-average molecular weights, Mn, that range from 7500 to 75,000. By using 25% v/v of the cosolvents dioxane, tetrahydrofuran, acetone, and dimethylformamide, 85, 45, 7 and 2% product yields, respectively, resulted after 24 h. Increasing the proportion of dioxane to water from 1:3 to 1:1 and 3:1 resulted in a decrease in polymer yield from 45 to 38 and 7%, respectively. Increase in the enzyme concentration from 70 to 80 and 90 mg/mL resulted in increased reaction kinetics. By adjustment of the molar ratio of 2,4-pentanedione to hydrogen peroxide between 1.30:1.0 and 1.45:1.0, the product yields and Mn values were increased. On the basis of the catalytic properties of HRP and studies herein, we believe that the keto-enoxy radicals from 2,4-pentanedione are the first radical species generated. Then, initiation may take place through this radical or by the radical transfer to another molecule.

Free Radicals↗

Candida antartica lipase B catalyzed polycaprolactone synthesis: effects of organic media and temperature.

Engineering of the reaction medium and study of an expanded range of reaction temperatures were carried out in an effort to positively influence the outcome of Novozyme-435 (immobilized Lipase B from Candida antarctica) catalyzed epsilon-CL polymerizations. A series of solvents including acetonitrile, dioxane, tetrahydrofuran, chloroform, butyl ether, isopropyl ether, isooctane, and toluene (log P from -1.1 to 4.5) were evaluated at 70 degrees C. Statistically (ANOVA), two significant regions were observed. Solvents having log P values from -1.1 to 0.49 showed low propagation rates (< or = 30% epsilon-CL conversion in 4 h) and gave products of short chain length (Mn < or = 5200 g/mol). In contrast, solvents with log P values from 1.9 to 4.5 showed enhanced propagation rates and afforded polymers of higher molecular weight (Mn = 11,500-17,000 g/mol). Toluene, a preferred solvent for this work, was studied at epsilon-CL to toluene (wt/vol) ratios from 1:1 to 10:1. The ratio 1:2 was selected since, for polymerizations at 70 degrees C, 0.3 mL of epsilon-CL and 4 h, gave high monomer conversions and Mn values (approximately 85% and approximately 17,000 g/mol, respectively). Increasing the scale of the reaction from 0.3 to 10 mL of CL resulted in a similar isolated product yield, but the Mn increased from 17,200 to 44,800 g/mol. Toluene appeared to help stabilize Novozyme-435 so that lipase-catalyzed polymerizations could be conducted effectively at 90 degrees C. For example, within only 2 h at 90 degrees C (toluene-d8 to epsilon-CL, 5:1, approximately 1% protein), the % monomer conversion reached approximately 90%. Also, the controlled character of these polymerizations as a function of reaction temperature was evaluated.

Candida↗

Hydrolytic degradation of PCL/PEO copolymers in alkaline media.

PCL/PEO copolymers with different compositions were obtained from ring opening polymerization of epsilon-caprolactone in the presence of ethylene oxide and characterized by various analytical techniques. Data collected from DSC and X-ray diffractometry suggested that the copolymer chains possess a blocky structure, leading to both PCL and PEO-type crystalline structures. Hydrolytic degradation of these copolymers was carried out in a pH=10.6 carbonate buffer solution at 37 degrees C. Comparison was made with a PCL homopolymer and a PCL/PEG blend which had the same gross composition as one of the copolymers. The results showed that the presence of PEO sequences considerably enhanced the hydrophilicity of the copolymers as compared with PCL homopolymer. Nevertheless, the degradability of PCL chains was not enhanced due to the phase separation between the two components. These materials should be of great interest for biomedical uses such as matrices for sustained drug delivery because of the presence of both hydrophilic and hydrophobic microdomains.

Journal Article↗

Functional compartmentalization of opioid desensitization in primary sensory neurons.

The cellular correlates of desensitization or tolerance are poorly understood. To address this, we studied acute and long-term mu-opioid desensitization, with respect to Ca(2+) currents, in cultured rat dorsal root ganglion (DRG) neurons. Exposure of DRG neurons to the mu-agonist [D-Ala(2),N-MePhe(4), Gly-ol(5)]-enkephalin (DAMGO; 3 microM) reduced whole-cell currents approximately 35%, but with continued agonist application, 52% of the response was lost over 10 to 12 min. In contrast, exposure of DRG neurons to DAMGO for 24 h resulted in a nearly complete loss of Ca(2+) channel regulation after washing and re-exposure to DAMGO. Responses to the gamma-aminobutyric acid(B) agonist baclofen were not affected in these neurons. Acute desensitization preferentially affected the voltage-sensitive component of mu-opioid and gamma-aminobutyric acid(B) responses. Facilitation of both the DAMGO- and baclofen-inhibited current by a strong depolarizing prepulse was significantly attenuated in acutely desensitized neurons. Because G(betagamma)-subunits mediate neurotransmitter-induced changes in channel voltage-dependent properties, these data suggest an altered interaction of the G(betagamma)-subunit with the Ca(2+) channel. Block of N-type Ca(2+) channels with omega-conotoxin GVIA revealed a component of the opioid response that did not desensitize over 10 min. We conclude that acute and long-term mu-opioid desensitization in DRG neurons occurs by different mechanisms. Acute desensitization is heterologous and functionally compartmentalized: the pathway targeting non-N-type channels is relatively resistant to the early effects of continuous agonist exposure; the pathway targeting N-type channels in a largely voltage-insensitive manner is partially desensitized; and the pathway targeting N-type channels in a largely voltage-sensitive manner is completely desensitized.

Analgesics, Opioid↗

Genetic alteration of phospholipase C beta3 expression modulates behavioral and cellular responses to mu opioids.

Morphine and other micro opioids regulate a number of intracellular signaling pathways, including the one mediated by phospholipase C (PLC). By studying PLC beta3-deficient mice, we have established a strong link between PLC and mu opioid-mediated responses at both the behavioral and cellular levels. Mice lacking PLC beta3, when compared with the wild type, exhibited up to a 10-fold decrease in the ED(50) value for morphine in producing antinociception. The reduced ED(50) value was unlikely a result of changes in opioid receptor number or affinity because no differences were found in whole-brain B(max) and K(d) values for mu, kappa, and delta opioid receptors between wild-type and PLC beta3-null mice. We also found that opioid regulation of voltage-sensitive Ca(2+) channels in primary sensory neurons (dorsal root ganglion) was different between the two genotypes. Consistent with the behavioral findings, the specific mu agonist [D-Ala(2),(Me)Phe(4),Gly(ol)(5)]enkephalin (DAMGO) induced a greater whole-cell current reduction in a greater proportion of neurons isolated from the PLC beta3-null mice than from the wild type. In addition, reconstitution of recombinant PLC protein back into PLC beta3-deficient dorsal root ganglion neurons reduced DAMGO responses to those of wild-type neurons. In neurons of both genotypes, activation of protein kinase C with phorbol esters markedly reduced DAMGO-mediated Ca(2+) current reduction. These data demonstrate that PLC beta3 constitutes a significant pathway involved in negative modulation of mu opioid responses, perhaps via protein kinase C, and suggests the possibility that differences in opioid sensitivity among individuals could be, in part, because of genetic factors.

Animals↗

A tunable switch to regulate the synthesis of low and high molecular weight microbial polyesters.

The addition of poly(ethylene glycol) (Mn = 200 g/mol) (PEG-200) to the fermentation media of Alcaligenes eutrophus and Alcaligenes latus at various stages of growth resulted in the synthesis of poly(3-hydroxybutyrate) (PHB) with bimodal molecular weight distributions. The presence of 2% w/v-PEG-200 did not have deleterious effects on PHB volumetric yields and cell productivity. In general, the Mn values of the high (H) and low (L) fractions showed little variability as a function of the time at which PEG-200 was added to the cultures. By this approach, the H:L ratios (w/w) of the PHB synthesized by A. eutrophus and A. latus were varied from 9:91 to 76:24 and from 16:84 to 88:12, respectively. It is believed that the H fractions were formed prior to the addition of PEG-200 to the cultures. Also, once PEG-200 was made available to the cells, PEG-200 acted as a switch so that the reduced molecular weight fraction was formed. In addition, a necessary requirement for the above is that the frequency of transesterification reactions during polymer synthesis was small. The efficiency that PEG-200 reduced the molecular weight of the PHBs formed by both bacteria appears similar. Indirect evidence suggests that the PHB L fractions formed by A. latus subsequent to PEG-200 addition consist primarily of chains that have PEG terminal groups. This terminal chain structure was not observed for PHB formed by A. eutrophus.

Alcaligenes↗

Biosynthesis of novel exopolymers by Aureobasidium pullulans.

Aureobasidium pullulans ATCC 42023 was cultured under aerobic conditions with glucose, mannose, and glucose analogs as energy sources. The exopolymer extracts produced under these conditions were composed of glucose and mannose. The molar ratio of glucose to mannose in the exopolymer extract and the molecular weight of the exopolymer varied depending on the energy source and culture time. The glucose content of exopolymer extracts formed with glucose and mannose as the carbon sources was between 91 and 87%. The molecular weight decreased from 3.5 x 10(6) to 2.12 x 10(6) to 0.85 x 10(6) to 0.77 x 10(6) with culture time. As the culture time increased, the glucose content of the exopolymer extract formed with glucosamine decreased from 55 +/- 3 to 29 +/- 2 mol%, and the molecular weight increased from 2.73 x 10(6) to 4.86 x 10(6). There was no evidence that glucosamine was directly incorporated into exopolymers. The molar ratios of glucose to mannose in exopolymer extracts ranged from 87 +/- 3:13 +/- 3 to 28 +/- 2:72 +/- 2 and were affected by the energy source added. On the basis of the results of an enzyme hydrolysis analysis of the exopolymer extracts and the compositional changes observed, mannose (a repeating unit) was substituted for glucose, which gave rise to a new family of exopolymer analogs.

3-O-Methylglucose↗

Effects of glucose and glycerol on gamma-poly(glutamic acid) formation by Bacillus licheniformis ATCC 9945a.

Bacillus licheniformis ATCC 9945a is one of the bacterial strains that produce gamma-poly(glutamic acid) (gamma-PGA). The use of carbohydrate medium components for gamma-PGA production was explored. Cells were grown in shake flasks or in controlled pH fermentors using medium formulations that contain different carbon sources. During the cultivations, aliquots were removed to monitor cell growth, carbon utilization, polymer production, and polymer molecular weight. Glucose was a better carbon source than glycerol for cell growth. Furthermore, glucose was utilized at a faster rate than glycerol, citrate, or glutamate. However, by using mixtures of glucose and glycerol in medium formulations, the efficiency of gamma-PGA production increased. For example, by increasing the glycerol in medium formulations from 0 to 40 g/L, the gamma-PGA broth concentration after 96 h increased from 5.7 to 20.5 g/L. Considering that glycerol utilization was low for the glucose/glycerol mixtures studied, it was unclear as to the mechanism by which glycerol leads to enhanced product formation. Cell growth and concomitant gamma-PGA production (12 g/L) at pH 6.5 was possible using glucose as a carbon source if trace amounts (0.5 g/L each) of citrate and glutamate were present in the medium. We suggested that citrate and glutamate were useful in preventing salt precipitation from the medium. In addition, glutamate may be preferred relative to ammonium chloride as a nitrogen source. The conversion of glucose to gamma-PGA by the strain ATCC 9945a was believed to occur by glycolysis of glucose to acetyl-CoA and tricarboxylic acid (TCA) cycle intermediates that were then metabolized via the TCA cycle to form alpha-ketoglutarate, which is a direct glutamate precursor.

Bacillus↗

3-Nitropropionic acid exacerbates N-methyl-D-aspartate toxicity in striatal culture by multiple mechanisms.

We examined the effects of 3-nitropropionic acid-induced succinate dehydrogenase inhibition on neuronal ATP content, N-methyl-D-aspartate-induced neuronal death, resting membrane potential, and N-methyl-D-aspartate-induced changes in cytosolic calcium concentration ([Ca2+]c) in cultured rat striatal neurons. Exposure of cultures to 3 mM 3-nitropropionic acid for 3 h did not cause overt toxicity, but reduced ATP content by 35%. Treatment with 3-nitropropionic, or removal of Mg2+ from the medium, enhanced subsequent N-methyl-D-aspartate toxicity, reducing the LC50 from 250 microM to 12 microM or 30 microM, respectively. Even after Mg2+ removal, enhancement of N-methyl-D-aspartate toxicity by 3-nitropropionic acid remained pronounced, with the LC50 further decreasing to 3 microM. The mean resting membrane potential of neurons treated with 3-nitropropionic acid was -37 mV, while that in control neurons was -61 mV. Treatment with 3-nitropropionic did not affect baseline [Ca2+]c as determined by fura-2 microfluorimetry. N-methyl-D-aspartate (30 microM) caused a rapid rise in [Ca2+]c, the initial magnitude of which was not affected by 3-nitropropionic acid. However, after a 1-h treatment, [Ca2+]c was dramatically higher in 3-nitropropionic acid-treated neurons. This increased calcium load was washed out slowly and only partially, although calcium in control neurons washed out rapidly and almost completely. These results suggest that in striatal neurons, the enhancement of N-methyl-D-aspartate toxicity caused by succinate dehydrogenase inhibition may be due to synergism between partial relief of the Mg2+ blockade of the N-methyl-D-aspartate receptor and other mechanisms, including disruption of neuronal calcium regulation. This synergism may be relevant to the neuronal death observed in neurodegenerative disorders.

Action Potentials↗

Incorporation of 2-hydroxyl fatty acids by Acinetobacter calcoaceticus RAG-1 to tailor emulsan structure.

Acinetobacter calcoaceticus RAG-1 was cultured on different chain length saturated 2-hydroxyl fatty acid (2-HOFA) carbon sources as follows: C12:0 (2-OH), C14:0 (2-OH), C16:0 (2-OH) and C18:0 (2-OH). These 2-HOFAs were used as either sole carbon sources or cosubstrates with C14:0 (total 1% w/v) to form new emulsans (EMs) having controlled side chain FA structure and, therefore, unique emulsifier characteristics. EM yields and cell dry weights ranged from 0.6 to 1.8 g/l and 0.9 to 3.9 g/l, respectively, depending on the carbon source(s) and the cultivation conditions. The content of C12:0 (2-OH) EM substituents reached high levels (306 nmol/mg-EM, 64.4 mol% of total FAs) by selectively feeding this FA. Substantial quantities of 2-HOFAs with chain lengths > or = C14-up to 96 nmo1/mg-EM or 15.2 mol% for C16:0 (2-OH)-were also incorporated in EMs by providing the corresponding 2-HOFA carbon source in the medium. By increasing the medium 2-HOFA concentration large increases in EM total FA contents resulted. The EM FA content was as high as 955 nmol/mg-EM or 23 wt% for a culture containing 0.75 g/100 ml C18:0 (2-OH). An important metabolic pathway involved in EM side chain formation from C16:0 (2-OH) and C18:0 (2-OH) involves decarboxylation, oxidation of the alkanol to the corresponding n-1 FA-CoA intermediate and formation of odd chain length substituent side chain linkages by an EM acyl transferase. Addition of the enzyme alkylating agent iodoacetamide to cultures was used to: (i) enhance the incorporation into EMs of both C12:0 (2-OH) and C16:0 (2-OH) substituents; and (ii) increase by 1.3 to 1.8 fold (by wt.) the total EM FA content. Finally, it was concluded that enhanced emulsification activity of EMs is not necessarily achieved by forming products with relatively high 2- and 3-hydroxydodecanoic acid contents.

Acinetobacter calcoaceticus↗

Bioengineering of emulsifier structure: emulsan analogs.

Strategies were investigated to modulate the side chain structure of emulsans formed by Acinetobacter calcoaceticus RAG-1. Analysis of emulsan fatty acid side chain groups by gas chromatography--mass spectrometry (GC-MS) revealed that by provoking the exogenous n-alkanoic fatty acids 15:0, 16:0, and 17:0, emulsan analogs were formed with 53, 46, and 44 mol%, respectively, of fatty acid substituents with chain lengths equal to that of the carbon source. In contrast, the increase in emulsan fatty acids of chain lengths less than 15 or greater than 17 by providing corresponding shorter and longer chain length fatty acids as carbon sources was not substantial. When [1-13C]-labeled (99% enriched) palmitic acid was used as a carbon source along with acetate, analysis of M/z 75/74 and 87/88 isotopomer ratios by GC-MS indicated that 84 and 86% of the 16:0 (9-cis) side groups, respectively, were incorporated intact from the 16:0 carbon source. The percentage of 14- 15-, 16-, 17-, and 18-carbon chain length fatty acid esters that were monounsaturated were 11, 26, 50, 70, and 85% respectively. Based on the observed percentage of unsaturated chain length dependence and almost identical enrichment at C-1 of 16:0 and 16:1 (9-cis) side groups from [1-13 C]-labeled experiments, it was concluded that desaturation of preformed n-alkanoic acids was the predominant mechanism of their formation. Further work established correlations between side chain structure and product emulsification specificity/activity, so that bioengineered emulsans with improved selectivity can now be formed.

Acinetobacter calcoaceticus↗