PubMed Health⌕ Search

Biomedical subjects

R A Noble

Publications and source records attributed to R A Noble.

4 recordsLinked to original sources
PubMed2004

Modelling of the radiated field from multi-element capacitive micromachined ultrasonic transducers.

This paper presents results from a theoretical model of the ultrasonic fields radiated by a 3x3 assembly of capacitive micromachined ultrasonic transducer (cMUT) sources on the same silicon substrate. These predictions have, for the first time, been compared directly to the fields measured experimentally using a scanned miniature detector. This work indicates that there is minimal cross-coupling between source elements, and demonstrates that it is possible to predict successfully the field characteristics of various geometries of such cMUT elements, with a view to the development of future imaging systems.

Journal Article↗
PubMed2002

The characterization of capacitive micromachined ultrasonic transducers in air.

Surface micromachined, capacitive ultrasonic transducers have been fabricated using a low thermal budget, CMOS-compatible process. They exhibit interesting properties for transduction in air at frequencies in excess of 1 MHz, when driven from a standard ultrasonic voltage source. Experiments are described using 1 mm square devices in air, operating in both pitch-catch and pulse-echo modes. The dependence on d.c. bias voltage is examined, together with calibration measurements using 1/8 in. microphones. The radiated beam profile, and the farfield directivity pattern, have been measured for both broad bandwidth and one-burst excitation, using a scanned miniature receiver. A 16 element square array is also presented, which has been used to measure the beam cross-sections from a focussed source.

Journal Article↗
PubMed2001

Novel, wide bandwidth, micromachined ultrasonic transducers.

Surface micromachined, capacitive ultrasonic transducers have been fabricated using a low thermal budget, CMOS-compatible process. This process allows inherent control of parameters such as membrane size and thickness, cavity size and the intrinsic stress in the membrane to be achieved. Devices fabricated using this process exhibit interesting properties for transduction in air at frequencies in excess of 1 MHz when driven from a standard ultrasonic voltage source. Experiments have been performed with devices containing silicon nitride membranes of variable thicknesses over a 2 microm thick air cavity and with device dimensions of up to 5 mm square. This is much larger than has been reported for a device with a single membrane. Calibration measurements using 1/8 inch microphones in air, and miniature PVDF hyrdophones in water, have been performed. The dependence on d.c. bias voltage is examined, involving static membrane deflection measurements and received peak voltages. Pulse-echo and pitch-catch mode operation have been achieved. Interferometric measurements of membrane displacement have been performed in air to illustrate the membrane deflection characteristics. Operation in liquids is also discussed.

Equipment Design↗