Biomedical subjects

R Barbucci

Publications and source records attributed to R Barbucci.

At least 19 recordsLinked to original sources

PubMed2006

Anti-inflammatory properties of superoxide dismutase modified with carboxymetil-cellulose polymer and hydrogel.

Superoxide dismutase (SOD) was chemically bound to carboxymethyl-cellulose (CMC) polymer.Furthermore, SOD was also trapped into two hydrogels of CMC with 50% and 90% crosslinking degree. The ability of the two SOD-CMC hydrogels to capture SOD and their release kinetics were investigated. ATR FT-IR spectrometry was used to study the conformation of SOD interacting with both CMC polymer and hydrogels. The effect of SOD-CMC polymer conjugate and SOD-CMC hydrogel systems upon human fibroblasts was studied in vitro measuring the cell proliferation inhibition index and evaluating cell morphology. Using the xanthine oxidase-nitroblue tetrazolium assay, the specific activity of bound SOD to CMC polymer or trapped into hydrogels was evaluated. The specific activity of the enzyme was higher in SOD-CMC hydrogels than in SOD-CMC polymer conjugates.

Anti-Inflammatory Agents↗

PubMed2006

Immobilizing Cu,Zn-superoxide dismutase in hydrogels of carboxymethylcellulose improves its stability and wound healing properties.

Hydrogels of carboxymethylcellulose (CMC) with 50 and 90% cross-linking degree (CMC50% and CMC90%, respectively) were prepared and loaded with bovine erythrocyte Cu,Zn-superoxide dismutase (SOD) to obtain two drug delivery systems: SOD-CMC50% and SOD-CMC90%. Resistance of native SOD to inactivation by H2O2 and the effect of applying SOD-CMC hydrogels to open wounds of rats' back skin were examined and compared to that of SOD trapped into CMC50% and CMC90% hydrogels. Also, the effect of CMC50% and SOD-CMC90% on human fibroblasts proliferation was evaluated at different times. It was found that SOD in the hydrogel was more resistant to H2O2 inactivation than the native enzyme and at the same time it reduced the time necessary for wound healing. Furthermore, the highest cell proliferation value was found for the CMC50% hydrogels, which had a three-dimensional structure suitable for gas and nutrient exchanges and improving cell life conditions.

Carboxymethylcellulose Sodium↗

PubMed2005

Blood vessel formation after soft-tissue implantation of hyaluronan-based hydrogel supplemented with copper ions.

The possibility of ameliorating bone healing of implanted bone allografts is a field of great interest. Early vascular invasion is a key factor in bone allograft incorporation. It is well known that copper ions (Cu2+) show a proangiogenic action favouring the development of new vessels. In this work a hyaluronan based 50% hydrogel (Hyal-50%) was enriched with (Cu2+) and its proangiogenic activity was evaluated. Fifteen Sprague Dawley female rats were submitted to the subcutaneous implantation of Hyal-50%, freeze-dried bone allografts, Hyal-50%-Cu2+, freeze-dried bone allografts plus Hyal-50% and freeze-dried bone allografts plus Hyal-50%-Cu2+. One month later, histomorphometric analysis evidenced the presence of a fibrous-reactive capsule around all specimens showing significant differences among groups (p<0.0005). The highest thickness of the fibrous capsule was found around the freeze-dried bone implants (p<0.05); as well as the Hyal-50%-Cu2+ plus freeze-dried bone (15.2%, p<0.05) and Hyal 50% plus freeze-dried bone (21.4%, p<0.0005) implants showed a significant higher thickness compared with Hyal 50% and Hyal-50%-Cu2+. Statistical analysis showed a significant (p<0.01) higher vascular density in Hyal- 50%-Cu2+ and Hyal-50%-Cu2+ plus freeze-dried bone group when compared to other groups. The present preliminary results suggest the advantages offered by the combined use of a well-known biocompatible and tissue healing promoting material (Hyal-50%) and a new technique that consists of stimulating tissue vascularization using Cu2+ and that bone allograft incorporation may benefit from this technology.

Animals↗

PubMed2005

The response of primary articular chondrocytes to micrometric surface topography and sulphated hyaluronic acid-based matrices.

Understanding the response of chondrocytes to topographical cues and chemical patterns could provide invaluable information to advance the repair of chondral lesions. We studied the response of primary chondrocytes to nano- and micro-grooved surfaces, and sulphated hyaluronic acid (HyalS). Cells were grown on grooves ranging from 80 nm to 9 microm in depth, and from 2 microm to 20 microm in width. Observations showed that the cells did not spread appreciably on any groove size, or alter morphology or F-actin organization, although cells showed accelerated movement on 750 nm deep grooves in comparison to flat surfaces. On chemical patterns, the cells migrated onto, and preferentially attached to, HyalS and showed a greater degree of spreading and F-actin re-arrangement. This study shows that 750 nm deep grooves and sulphated hyaluronic acid elicit responses from primary chondrocytes, and this could have implications for the future direction of cartilage reconstruction and orthopaedic treatments in general.

Actins↗

PubMed2005

Hyaluronan and sulphated hyaluronan micropatterns: effect of chemical and topographic cues on lymphatic endothelial cell alignment and proliferation.

While tissue engineered blood vessels have entered surgical practice, the construction of artificial lymphatic vessels has never been attempted due to the small dimensions and fragility of lymphatic vessels. A possible alternative would be to obtain a new growth of interrupted lymphatic vessels. We have previously reported that lymphatic endothelial cells align when cultured on striped micropatterns of hyaluronan (Hyal) and aminosilanized glass. We here report a comparative study in which lymphatic endothelial cells have been plated on micropatterns with stripes of different width and height obtained by the photoimmobilization of Hyal and its sulphated derivative (HyalS) on aminosilanized glass to verify whether their response correlated with surface-chemistry andlor topography. On Hyal micropatterns, cells adhered to aminosilanized glass, avoiding Hyal stripes and molding their shape in accordance to the micropattern topography. Stress fibers, integrins and focal adhesion kinase organized accordingly. HyalS micropatterns with the same topography were unable to guide cell response, cells randomly adhered to HyalS and glass stripes, and polarization was attained only by increasing stripe height. These data indicate that surface chemistry is the main cue responsible for lymphatic endothelial cell guidance. When surface chemistry of stripes promotes cell adhesion as well as that of the substrate, topographical parameters become prevalent. Micropatterns with defined chemical and topographical properties may contribute to the design of new platforms for controlled cell growth in tissue engineering of lymphatic vessels.

Actins↗

PubMed2004

Novel carboxymethylcellulose-based microporous hydrogels suitable for drug delivery.

Several materials capable of acting as structures for controlled release were analysed for the fabrication of matrices. Among those used, hydrophilic polysaccharides appeared to be the most suitable materials. Carboxymethylcellulose (a semi-synthetic polysaccharide) was chemically cross-linked with a 60% and 90% cross-linking degree in order to obtain hydrogels and utilised as matrix for the realisation of controlled drug release systems. The morphology of the gels was changed in order to obtain a microporous structure with different porosity (14, 30 and 40 microm). The obtained porous matrices were characterised in terms of pore density, dimension and swelling behaviour. The influence of both the pore dimension and technique of loading on the release kinetics was analysed. By increasing the pore dimension the release of ibuprofen-lysin was slower. Inducing the microporous structure after the loading of the hydrogel with the drug resulted in a slower release.

Anti-Inflammatory Agents, Non-Steroidal↗

PubMed2004

Micropatterned hyaluronan surfaces promote lymphatic endothelial cell alignment and orient their growth.

The implant of a biocompatible device capable of guiding lymphatic vessel regeneration in patients who underwent removal of lymph nodes might contribute to restoring an efficient lymphatic drainage and help to prevent the occurrence of lymphedema. The aim of this study was to evaluate whether a microstructured surface could provide a guidance for the growth of cultured lymphatic endothelial cells. The presence of microstructures on a surface permits the control of cell adhesion, migration, proliferation, and differentiation. We report here that lymphatic endothelial cells align on microstructures of alternating hyaluronan and aminosylanized glass stripes obtained by photoimmobilization. Cells consistently spread and proliferate only on aminosylanized glass. They orient parallel to the longitudinal axis of the stripe. A pattern of alternating stripes of aminosylanized glass uniformly covered by elongated cells and of hyaluronan devoid of cells eventuallyforms. The presence of alpha(v)-integrins along cell borders of cells in search of contact with each other and at the leading edge of migrating cells, sites where new focal adhesions are presumably formed, indicates that integrin-mediated adhesion to the substrate guides cell migration along the microstructure. Micropatterned surfaces of hyaluronan thus proved to adequately orient the growth of cells allowing the regeneration of lymphatic endothelium in the desired direction.

Animals↗

PubMed2003

The use of hyaluronan and its sulphated derivative patterned with micrometric scale on glass substrate in melanocyte cell behaviour.

Surface microfabrication techniques were widely utilised for the spatial control of in vitro cell behaviour. A photo-immobilisation procedure was utilised to create micropatterned surfaces: four different stripe patterns (100, 50, 25 and 10 microm) of hyaluronan (Hyal) and its sulphated derivative (HyalS) on silanised glass substrate were obtained.The morphological analysis showed that the surface topography showed regular stripes of 100, 50, 25 and 10 microm wide and ranging from 300 nm up to 1 microm in thickness. They reproduced the exact photo-mask pattern: glass stripes alternating with polysaccharide ones. On the contrary, Hyal microstructures showed just a topographic pattern as the glass stripes appeared to be covered by a thin layer of the macromolecule by TOF-SIMS. Cell adhesion studies demonstrated that melanocytes adhered and oriented within the first 2h of culture on HyalS microdomains and not on Hyal microstructures where they spread on glass substrate around the patterned area. Double photo-immobilised samples characterised by a 100 microm stripe pattern of Hyal or HyalS on the top of a continuous layer of the two polysaccharides were also created in order to investigate the effect of the topography on cell behaviour. The obtained results demonstrated that melanocytes adhered on HyalS stripes while on the Hyal micropatterned surfaces they spread on silanised glass substrate around the structured area, resulting in the exclusion of the topographic pattern.

Animals↗

PubMed2003

Endothelization and adherence of leucocytes to nanostructured surfaces.

We analyse the leucocyte and endothelial cell response to polybromostyrene-polystyrene (PS/PBrS) and the poly-n-butylmethacrylate-polystyrene (PnBMA/PS) systems, both in flat form or nanostructured surfaces consisting of nanohills with increasing hill height (13-95nm). Experiments were carried out first with blood leucocytes alone, endothelial cells (of three different types) alone, and finally, using blood cells and endothelized nanosurfaces. Blocking monoclonal antibodies specific for CD11, CD29, CD31, CD54, CD166 were used to analyse whether and to what extent adhesion molecules could be involved in the adherence of both blood leucocytes and endothelial cells to different nanosurfaces. Expression of CD29 (beta-1 integrin), CD54 (ICAM-1) and CD166 (ALCAM) on blood leucocytes was dependent on the hill height, being most prominent with 13nm (PS/PBrS) and 45nm hill (PnBMA/PS) nanosurfaces. Adherence of a human microvascular endothelial cell line and umbilical primary endothelial cells was also related to hill height, being most prominent with 13nm hill height. An indirect correlation was observed between the extent of endothelization and the degree of leucocyte adherence. In cases of low to medium extent of endothelization, the adherence of monocytes and granulocytes was mediated by the expression of CD166, CD29 and CD11a (alpha-L integrin), CD29, CD31 (PECAM-1), respectively. Scanning electron microscopy studies showed the predominant emission of pseudopodia at the holes of the surfaces and the focal contacts with the nanosurfaces. Our studies emphasize the relevance of testing functional properties in co-culture experiments in the development and optimization of nanosurfaces for biomedical application.

Cell Adhesion↗

PubMed2003

Micro and nano-structured surfaces.

The study of cell reaction to micro and nanotopography is dependent on the method of manufacture available. Several methods of manufacture have been developed: polymer demixing, embossing and photolithography. Surfaces obtained with these different techniques, having micro and/or nanodomains, have been studied toward the same type of cells, i.e. human endothelial cells (HGTFN) and mouse fibroblasts (3T3). Polymer demixing of polystyrene (PS) and poly(4-bromostyrene) (PBrS) producing nanometrically islands of 18, 45 and 100 nm height, polycarbonate (PC) and polycaprolactone (PCL) grooved with grooves 450 nm wide and 190 high, the natural polysaccharide hyaluronic acid (Hyal) and its sulfated derivative (HyalS) photoimmobilized on silanized glass as grooves 250 nm high and 100, 50, 25 or 10 microm wide have been obtained. The morphology and polarization of the cells has been studied by optical microscopy and scanning electron microscopy. Cells respond in different way to the topography of the materials, but the surface chemistry is dominant in inducing different cell behavior.

Journal Article↗

PubMed2002

Hyaluronic acid hydrogel in the treatment of osteoarthritis.

In order to overcome the problem of rapid clearance of the polysaccharide hyaluronic acid (Hyal) in the treatment of osteoarthritis (OA), a 50% cross-linked Hyal hydrogel (Hyal 50%) was synthesised. The 50% refers to the amount of COOH groups of the polysaccharide involved in the cross-linking reaction. i.e. 50% of the total amount. The rheological behaviour of the Hyal 50% hydrogel, and in particular the possibility to inject it through a needle, was studied. The results obtained demonstrated that the hydrogel injected through the needle still behaved like a gel, although it showed a reduction of the dynamic moduli. The most appropriate sterilisation technique for this kind of hydrogel was also evaluated. Liophilised Hyal 50% samples were sterilised by steam, Ethylene Oxide (EtO) and gamma-rays. EtO and gamma-rays did not modify the characteristics of the hydrogel in terms of swellability and morphology. Lastly, the in vivo effect of Hyal 50% hydrogel in the treatment of chondral defect in rabbit knee was also studied. The results obtained showed the Hyal 50% injections improved chondrocytes density and matrix appearance. Furthermore, the permanence in situ of the hydrogel was longer than that of the linear Hyal.

3T3 Cells↗

PubMed2001

Solution structure of hyaluronic acid oligomers by experimental and theoretical NMR, and molecular dynamics simulation.

The conformational properties of hyaluronic acid (HA) oligomers in aqueous solution were investigated by combining high-resolution NMR experimental results, theoretical simulation of NMR two-dimensional (2D) spectra by Complete Relaxation Matrix Analysis (CORMA), and molecular dynamics calculations. New experimental findings recorded for the tetra- and hexasaccharides enabled the stiffness of the HA and its viscoelastic properties to be interpreted. In particular, rotating frame nuclear Overhauser effect spectroscopy spectra provided new information about the arrangement of the glycosidic linkage. From (13)C NMR relaxation the rotational correlation time (tau(c)) were determined. The tau(c) were employed in the calculation of geometrical constraints, by using the MARDIGRAS algorithm. Restrained simulated annealing and 1 ns of unrestrained molecular dynamic simulations were performed on the hexasaccharide in a box of 1215 water molecules. The beta(1 --> 3) and beta(1 --> 4) glycosidic links were found to be rigid. The lack of rotational degree of freedom is due to direct and/or water-mediated interresidue hydrogen bonding. Both single or tandem water bridges were found between carboxylate group and N-acetil group. The carboxylate group of glucuronic acid is not involved in a direct link with the amide group of N-acetyl glucosamine and this facilitated bonding between the residue and the water molecules.

Biopolymers↗

PubMed2000

Cu(II) and Zn(II) complexes with hyaluronic acid and its sulphated derivative. Effect on the motility of vascular endothelial cells.

With the aim of improving the compatibility of biomaterials to be used for the construction of cardiovascular prosthesis, we have designed bioactive macromolecules resulting from chemical modifications of hyaluronic acid (Hyal). The stability constants of Cu(II) and Zn(II) complexes with the sulphated derivative of hyaluronic acid (HyalS3.5) were evaluated. Two different complexes have been found for each metal ion, CuL, Cu(OH)2L and ZnL, Zn(OH)2L (L means the disaccharide unit of the ligands) in aqueous solution at 37 degrees C. The dihydroxo Cu(II) complex was present in high percentage at pH=7.4. On the contrary, the Zn(II) ion was present with a relatively low percentage of both complexes. The ability to stimulate endothelial cell adhesion and migration was evaluated for Hyal, HyalS3.5 and their complexes with Cu(II) and Zn(II) ions. The results revealed that Hyal and [Cu(OH)2HyalS3.5](4.5)- induced cell adhesion, while [ZnHyalS3.5](2.5)- and [Zn(OH)2HyalS3.5](4.5)- inhibited the process. The chemotactic activity of increasing concentrations of the above complexes was also evaluated, demonstrating that [Cu(OH)2HyalS3.5](4.5)- complex at 1 microM concentration was the most active in inducing cell migration. These results have been also strengthened by analysing adherent cell migration in agarose. In conclusion, sulphated hyaluronic acid coordinated to Cu(II) seems to be a promising matrix molecule for the construction of cardiovascular prosthesis.

Animals↗

PubMed2000

Immobilisation of sulphated hyaluronan for improved biocompatibility.

Hyaluronan (Hyal) was modified by the insertion of sulphate to hydroxyl groups. A series of heparin-like compounds with controllable properties was obtained. The physicochemical and biological behaviours of all these sulphated hyaluronan acids (HyalSx) and their complexes with heavy metal ions (Cu2+ and Zn2+) were investigated. HyalS, derivatives showed a good anticoagulant activity and low platelet aggregation which increased with increasing degree of sulphation. Moreover HyalSx and their Cu2+ complexes were demonstrated to favour the growth of human endothelial cells. However, the utilisation of HyalSx as a material is hindered by its high solubility in physiological solution. Our approach to improve its stability was directed to the synthesis of new HyalSx-based hydrogels and on the preparation of new biocompatible polymeric surfaces obtained through covalent photoimmobilisation of HyalSx. The reaction of primary ovine chondrocytes and B10D2 endothelial cells was studied on both matrices in terms of cell number, F-actin and CD44 receptor immunostaining. Analysis of cell movement showed that the cells respond to HyalSx showing good adhesion and spreading. These results suggest that HyalSx containing materials could be used as biomaterials to aid cartilage repair and vessel endothelisation.

Anticoagulants↗

PubMed2000

Synthesis, chemical and rheological characterization of new hyaluronic acid-based hydrogels.

New hyaluronic acid-based hydrogels have been synthesized. The carboxylate groups of hyaluronan were activated in order to bind the amino terminal groups of the di-amine cross-linking reagent. Different hydrogels were obtained according to the different di-amine cross-linking agents (1,3-diaminepropane, 1.6-diaminohexane, PEG500 di-amine. and PEG800 di-amine). The cross-linked polymer (C.L.Hyal) was then sulphated (C.L.HyalS) by a heterogeneous reaction using sulphur trioxide pyridine complex (SO3-Py). The thermo-mechanical properties and swelling degree were evaluated and are discussed in relation to the chemical structure and the hydrophilic character of the gels. The different behaviours of C.L.Hyal and C.L.HyalS indicate the important role of sulphated groups.

Biocompatible Materials↗

PubMed2000

In vitro study of blood-contacting properties and effect on bacterial adhesion of a polymeric surface with immobilized heparin and sulphated hyaluronic acid.

The blood-contacting properties and the effect on bacterial adhesion of a material based on polyurethane and poly(amido-amine) (PUPA), both in its native form and with the anticoagulant molecules heparin or sulphated hyaluronic acid (HyalS3.5) electrostatically bonded to its surface, were evaluated and compared in vitro. The presence of the biological molecules on the surface was revealed by a dye test and ATR/FTIR analysis. Bound heparin was found to maintain its physiological action, in terms of thrombin inactivation, as well as did free heparin. Moreover, it reduced the degree of platelet adhesion. On the contrary, bound HyalS3.5 lost its anticoagulant activity, though it reduced platelet adhesion. The number of platelets on both modified surfaces was low. Their shape distribution, as determined by SEM, did not differ significantly on the two modified surfaces or with respect to the bare PUPA surface. HyalS3.5 and heparin also inhibited adhesion of Staphylococcus epidermidis to the material. A possible relationship between the platelet and bacterial adhesion is ascribed to the mediating role of plasma proteins.

Anticoagulants↗

PubMed1999

Effect of behavioral stress on platelet reactivity on polymeric surfaces.

It is well known that stressful stimuli change blood functions and platelet parameters are altered in humans and animals subjected to stress. We have examined the influences of behavioral stress on the morphological responses of platelets on a standard biomaterial, polyethylene (PE). Male rabbits were used. Blood was collected from the marginal vein of the ear 2 times per subject: the first sample was used as the baseline; 1 week later, the second was preceded in half of the subjects by 20 min of immobilization stress. In vitro adhesion of platelets on the PE was evaluated. The exposure of animals to stress induced a dramatic change in platelet morphology and functions on the PE: a higher degree of platelet adhesion, increased platelet spreading, and the appearance of pseudopodia. In the unstressed subjects there were no modifications of the platelets on the PE with respect to the baseline. The present experiment emphasizes for the first time the possible problems involved with the varying physiological conditions of patients before and after any biomaterial application surgery and of subjects who supply the blood for hemocompatibility tests performed on biomaterials. Therefore, in assessments of the performance of different biomaterials, the reactivity of blood factors in the patients should be considered and the test of blood compatibility should be performed with blood collected from donors in appropriate physiological conditions.

Animals↗

PubMed1999

The role of plasma proteins and stress in the assessment of hemocompatibility.

The physiological and psychological conditions of subjects supplying blood for hemocompatibility tests significantly affect the behavior of platelets in terms of both adhesion and activation. The responses of platelets to a standard biomaterial, polyethylene (PE), were examined with blood collected from male rabbits both in basal conditions and after stress. Different media were utilized. First, platelet-rich plasma (PRP) was used to obtain a PE response to contact with platelets. Then platelets drawn from PRP were isolated and washed with Krebs-Ringer solution. One aliquot was suspended in serum (Pw-S) where fibrinogen was absent, another aliquot in Krebs-Ringer solution (Pw-KR) (in order to avoid the influence of the plasma proteins on platelets), and a third aliquot in the original plasma from which the platelets were drawn (Pw-PPP) (in order to restore the initial condition of the plasma but with washed platelets). The analysis of platelet adhesion and morphology was performed by Scanning Electron Microscopy (SEM). Differences in platelet adhesion and morphology were observed with four different media in nonstressed animals, with Pw-PPP showing a higher number and Pw-S and PW-KR lower numbers. Platelet morphology indicated low levels of activation. The platelets drawn from stressed subjects could not be counted in either PRP or PPP medium because they were fully aggregated and adhered; in contrast, in Pw-KR and Pw-S, no significant differences were found with respect to nonstressed conditions, and there was little difference in platelet morphology. All of these factors underline the role of plasma proteins, in particular fibrinogen, in the stress-induced activation of platelets.

Animals↗