Biomedical subjects

R Bareille

Publications and source records attributed to R Bareille.

At least 19 recordsLinked to original sources

PubMed2006

Calcium carbonate-calcium phosphate mixed cement compositions for bone reconstruction.

The feasibility of making calcium carbonate-calcium phosphate (CaCO(3)-CaP) mixed cements, comprising at least 40% (w/w) CaCO(3) in the dry powder ingredients, has been demonstrated. Several original cement compositions were obtained by mixing metastable crystalline CaCO(3) phases with metastable amorphous or crystalline CaP powders in aqueous medium. The cements set within at most 1 h at 37 degrees C in atmosphere saturated with water. The hardened cement is microporous and exhibits weak compressive strength. The setting reaction appeared to be essentially related to the formation of a highly carbonated nanocrystalline apatite phase by reaction of the metastable CaP phase with part or almost all of the metastable CaCO(3) phase. The recrystallization of metastable CaP varieties led to a final cement consisting of a highly carbonated poorly crystalline apatite analogous to bone mineral associated with various amounts of vaterite and/or aragonite. The presence of controlled amounts of CaCO(3) with a higher solubility than that of the apatite formed in the well-developed CaP cements might be of interest to increase resorption rates in biomedical cement and favors its replacement by bone tissue. Cytotoxicity testing revealed excellent cytocompatibility of CaCO(3)-CaP mixed cement compositions.

Biocompatible Materials↗

PubMed2006

Functionalization of biomaterials and cell to cell communication.

In the field of osseous substitution, the possibilities being offered to the surgeons prove sometimes difficult to apply in particular in the case of great losses of osseous substance. For these reasons, it is necessary to develop innovative techniques to satisfy the request increasing for substitutes and to see appearing on the market solutions combining availability, perenniality and biosecurity of the implants. The implantation of stem cells in a biomaterial opens a way of development of therapeutic substitute. Moreover, in order to optimize the rehabitation of the biomaterials by the cells and the host tissues, the second approach consists in modifying the surface of materials by the coating or the grafting of adhesive factors in order to stimulate their colonization. At least, one cannot consider a tissue mechanism of repair without a better knowledge of the respective role of the various cell populations implied in the rebuilding of this tissue and their cell to cell communication processes.

Alloys↗

PubMed2005

Mineralization of regenerated cellulose hydrogels induced by human bone marrow stromal cells.

The proliferation of cultured human bone marrow stromal cells (HBMSC) on regenerated cellulose hydrogels was assessed. Regenerated cellulose hydrogels showed good rates of HBMSC proliferation, the cells exhibiting a flattened morphology, and after 22 days in culture, the cells had homogeneously colonized the surface of the materials. Moreover, since the early days in culture, between the surface of the materials and attached cells a continuous granulated hydroxyapatite layer was formed. It has been previously demonstrated in vitro, but without cells, that these materials did not mineralize. Hence, it seems that HBMSC promoted the mineralization of the surface.

Bone Marrow Cells↗

PubMed2005

Effect of several sterilisation techniques on homogeneous self assembled monolayers.

Understanding how cells sense their environment and are able to regulate their metabolism is of great importance for the success of biomaterials implantation. Self assembled monolayers (SAMs) are in use nowadays to model the surface of such materials. They permit the control of different surface parameters (like chemistry, surface energy and topography) enabling to get a greater insight in cells behaviour when interacting with surfaces and thus, in the future, to enhance surface properties of biomaterials. As sterilisation is the compulsory step for in vitro and in vivo assays with living biological materials, it is important to know how SAMs react under sterilisation techniques in use on biomaterials. In this work, the effect of three types of sterilisation techniques: gamma-irradiation, mostly used on biomaterials, dry heat and steam autoclaving, have been investigated on NH2 and CH3 terminated SAMs. Gamma-irradiation destructs drastically the NH2 and partially the CH3 monolayers by producing oxidative compounds (COOH, C=O, C-OH). The main product induced by gamma-irradiation on NH2 monolayers is carboxylic acid, whereas CH3 shows an important increase in the amount of alcoholic groups. This difference in deterioration is assumed to be due to the higher stability of the CH3 monolayer. Steam autoclaving to a lesser extent gives the same results on NH2 monolayers. Dry heat seems to be the most reliable technique, which can be used on such surfaces as it removes physically adsorbed organic contaminants without affecting the integrity of the surface.

Biocompatible Materials↗

PubMed2005

Development of a resorbable macroporous cellulosic material used as hemostatic in an osseous environment.

The control of bleeding is a frequently encountered therapeutic problem, particularly during dental surgery. The most efficient substances used to resolve this problem are not risk-free because of their animal or human origins, so cellulosic materials are potentially of interest. The aim of this study was to develop a resorbable macroporous cellulosic material for use as a resorbable hemostatic agent in bone sites. The degradation and the cytocompatibility of the cellulosic material versus controls were evaluated and its behaviour in vivo was studied. An original process using calcium carbonate powder as inverse matrix was used to develop a macroporous material. In order to predegrade the cellulosic material for hemostatic use, oxidation was performed with periodate. A dialdehyde component unstable at physiological pH was thus obtained. The material was found to have cytotoxicity, biocompatibility, and resorption properties similar to control but its hemostatic power was higher.

Absorbable Implants↗

PubMed2005

In vitro endothelial cell susceptibility to xenobiotics: comparison of three cell types.

In three different endothelial cell (EC) cultures (primary human umbilical cord vein, so-called HUVEC; and immortalized cell lines HBMEC and EA-hy-926), the effects of different xenobiotics were studied in order to standardize vascular EC models for in vitro pharmacotoxicological studies. Cell characteristics were first investigated by the production and the mRNA levels of known endothelial markers in the three EC culture models. EC secretory products, tissue plasminogen activator (tPA) and von Willebrand factor (vWF), were present in the supernatant of the immortalized cell lines. The mRNA levels of vWF, tPA, platelet endothelial cell adhesion molecule-1 (PECAM-1/CD31), and beta -integrin subunit, which are involved in the control of platelet function, coagulation, and fibrinolysis as well as in cell-matrix interactions, were investigated in all EC types. For at least three parameters, cultured cells provided marked characteristics of EC phenotype, in HUVEC and in immortalized cell lines, regardless of their origin from the macro- or microcirculation. Toxicity experiments were assessed after 24 h exposure to cadmium, cyclosporin A and cisplatin by MTT assay. These experiments show nonsignificant difference in susceptibility to cyclosporin A and cadmium on HUVEC, HBMEC, and EA-hy-926. However, HBMEC, seems to be highly susceptible to cisplatin compared to HUVEC, the latter being more sensitive than EA-hy-926. For experiments conducted with cyclosporin and cadmium, cell lines could constitute an alternative material for routine cytotoxicity studies.

Biomarkers↗

PubMed2004

Design of new titanium alloys for orthopaedic applications.

Parallel to the biofunctionalisation of existing materials, innovation in biomaterials engineering has led to the specific design of titanium alloys for medical applications. Studies of the biological behaviour of metallic elements have shown that the composition and structure of the material should be carefully tailored to minimise adverse body reactions and to enhance implant longevity, respectively. Consequently, interest has focused on a new family of titanium alloys: Ti-6Mo-3Fe-5Ta, Ti-4Mo-2Fe-5Ta and Ti-6Mo-3Fe-5Zr-5Hf alloys. The non-toxicity of the specially designed titanium alloys compared with osteoblastic cells has been ascertained using MTT and RN tests. In addition, phase transformations upon thermal processing have been investigated, with comparison with a well-defined beta titanium alloy. Optimum thermal processing windows (above 550 degrees C) have been designed to generate a stable and nanostructured alpha phase from the isothermal omega phase that precipitates in a low temperature range (150-350 degrees C). The generation of such nanostructured microstructures should provide a promising opportunity to investigate tissue-biomaterial interactions at the scale of biomolecules such as proteins.

Alloys↗

PubMed2004

Cyclo-(DfKRG) peptide grafting onto Ti-6Al-4V: physical characterization and interest towards human osteoprogenitor cells adhesion.

In the present paper, specific interest has been devoted to the design of new hybrid materials associating Ti-6Al-4V alloy and osteoprogenitor cells through the grafting of two RGD containing peptides displaying a different conformation (linear RGD and cyclo-DfKRG) onto titanium surface. Biomimetic modification was performed by means of a three-step reaction procedure: silanization with APTES, cross-linking with SMP and finally immobilization of peptides thanks to thiol bonding. The whole process was performed in anhydrous conditions to ensure homogeneous biomolecules layout as well as to guarantee a sufficient amount of biomolecules grafted onto surfaces. The efficiency of this new route for biomimetic modification of titanium surface was demonstrated by measuring the adhesion between 1 and 24 h of osteoprogenitor cells isolated from HBMSC. Benefits of the as-proposed method were related to the high concentration of peptides grafted onto the surface (around 20 pmol/mm(2)) as well as to the capacity of cyclo-DfKRG peptide to interact with integrin receptors. Moreover, High Resolution beta-imager (using [(35)S]-Cys) has exhibited the stability of peptides grafted onto the surface when treated in harsh conditions.

Alloys↗

PubMed2004

Induced membranes secrete growth factors including vascular and osteoinductive factors and could stimulate bone regeneration.

Based on a new concept, a procedure combining induced membranes and cancellous autografts allows the reconstruction of wide diaphyseal defects. In the first stage of this procedure, a cement spacer is inserted into the defect; the spacer is responsible for the formation of a pseudo-synovial membrane. In the second stage, the defect is reconstructed two months later by an autologous cancellous bone graft. The aim of this study was to evaluate the histological and biochemical characteristics of these membranes induced in rabbits. Histological studies carried out two, four, six, and eight weeks following implantation revealed a rich vascularization. Qualitative and quantitative immunochemistry showed production of growth factors (VEGF, TGFbeta1) and osteoinductive factors (BMP-2). Maximum BMP-2 production was obtained four weeks after the implantation, and, at this time, induced membranes favored human bone marrow stromal cell differentiation to the osteoblastic lineage. Should these results be confirmed in humans, bone reconstruction could be carried out earlier than previously thought and in better conditions than expected, the membrane playing the role of an in situ delivery system for growth and osteoinductive factors.

Animals↗

PubMed2004

Grafting RGD containing peptides onto hydroxyapatite to promote osteoblastic cells adhesion.

Ceramics possess osteoconductive properties but exhibit no intrinsic osteoinductive capacity. Consequently, they are unable to induce new bone formation in extra osseous sites. In order to develop bone substitutes with osteogenic properties, one promising approach consists of creating hybrid materials by associating in vitro biomaterials with osteoprogenitor cells. With this aim, we have developed a novel strategy of biomimetic modification to enhance osseointegration of hydroxyapatite (HA) implants. RGD-containing peptides displaying different conformations (linear GRGDSPC and cyclo-DfKRG) were grafted onto HA surface by means of a three-step reaction procedure: silanisation with APTES, cross-linking with N-succinimidyl-3-maleimidopropionate and finally immobilisation of peptides thanks to thiol bonding. Whole process was performed in anhydrous conditions to ensure the reproducibility of the chemical functionalisation. The three-step reaction procedure was characterised by high resolution X-ray photoelectron spectroscopy. Efficiency of this biomimetic modification was finally demonstrated by measuring the adhesion of osteoprogenitor cells isolated from HBMSC onto HA surface.

Amino Acid Sequence↗

PubMed2003

Characterization of dynamic cellular adhesion of osteoblasts using atomic force microscopy.

BACKGROUND: Atomic force microscopy (AFM) can be used to visualize the cell morphology in an aqueous environment and in real time. It also allows the investigation of mechanical properties such as cell compliance as a function of cell attachment. This study characterized and evaluated osteoblast adhesion by AFM. METHODS: Human bone marrow stromal cells were cultured on two types of surface to induce weak and strong cellular adhesions. RESULTS: Cells were considered as spreading if they had a flattened and lengthened shape and a cytoskeletal organization in the submembrane cytosolic region. Cell detachment demonstrated different adhesion states between adherent cells to be distinguished. The stability of the cytoskeletal fibers indicated that cells were adherent. The elastic modulus was estimated by two complementary approaches. The values deduced were between 3 x 10(2) and 2 x 10(5) Nm(-2) according to the state of cell adhesion and the approaches used to measure this elastic modulus. CONCLUSIONS: Although the results were qualitative, a relation may be deduced between the elasticity of living cells as demonstrated by cytoskeletal organization and the state of cell adhesion. The technique could be used to determine the adhesion state of an adherent osteoblast observed under AFM.

Bone Marrow Cells↗

PubMed2003

A cyclo peptide activates signaling events and promotes growth and the production of the bone matrix.

The interaction of bone cells and their underlying extracellular matrix impacts biological processes such as maintenance of tissue integrity. The biological recognition of the extracellular matrix by attached cells is mediated by the activity of integrins that recognize adhesive-specific domains. The most widely recognized adhesive motif is the RGD sequence, common to many of the adhesive matrix molecules. Here, we show that cyclo DFKRG which was previously selected to increase cell adhesion of human bone marrow stromal cells (HBMSC), increases both cell differentiation and mineralization through activation of tyrosine kinases, focal adhesion kinase (p(125)FAK) and Mitogen Activated Protein (MAP) kinases.

Bone Matrix↗

PubMed2003

Caution regarding the combined effects of extracellular matrices and nutrient media on cultured endothelial cells.

To study the influence of smooth muscle cells (SMC) on endothelial cells (EC), different co-culture designs are available, including EC seeding on SMC extracellular matrix (ECM). We explored human umbilical vein endothelial cell (HUVEC) adhesion and proliferation on either in situ or coated ECM, elaborated by HUVECs or human arterial smooth muscle cells (HUASMCs), in the presence of different nutrient media containing varying amounts of fetal calf serum. Coating wells with HUVEC or HUASMC ECMs did not improve HUVEC adhesion 1 h after cell seeding, compared with uncoated wells. HUVEC adhesion on in situ HUVEC-ECM and HUASMC-ECM was significantly increased compared with uncoated wells. The substratum upon which cells are maintained was found to play a crucial role, in conjunction with the medium to which HUVECs are exposed for their proliferative response. These results stress the importance of selecting media in relation to the particular substratum, in order to avoid misinterpretation of data.

Cell Adhesion↗

PubMed2002

RGD-functionalized spherulites as targeted vectors captured by adherent cultured cells.

Spherulites are multilamellar vesicles consisting of concentric shells that can encapsulate small organic molecules or macromolecules. We investigate the possibility of targeting neutral spherulites to adherent culture cells by functionalizing their surface with RGD-containing ligands. The strength and specificity of association of RGD spherulites with several cell lines (EAhy 926 endothelial cell line, human umbilical vein endothelial cell (HUVEC) and human osteoprogenitor (HOP) primary cells) was studied, and the molecular interaction of RGD spherulites with the EAhy 926 cell surface was investigated. We show that, after binding to cells, spherulites are internalized.

Biological Transport↗

PubMed2002

Function of linear and cyclic RGD-containing peptides in osteoprogenitor cells adhesion process.

Cell adhesion directly influences cell growth, differentiation and migration as well as morphogenesis, integrity and repair. The extracellular matrix (ECM) elaborated by osteoblast cells constitutes a regulator of the cell adhesion process and then of the related phenomenon. These regulatory effects of ECM are mediated through integrins and some of them are able to bind RGD sequences. The aim of this study was to determine the role of the sequence and the structure of RGD-containing peptides (linear and cyclic) as well as their role in the cell adhesion process. Cell adhesion assays onto ECM proteins coated surfaces were performed using a range of linear and cyclic RGD-containing peptides. We showed a different human osteoprogenitor cell adhesion according to the coating for ECM proteins and for RGD-peptides. Inhibition assays using peptides showed different responses depending on the coated protein. Depending on the amino-acid sequence and the structure of the peptides (cyclic linear), we observed 100% inhibition of cell adhesion onto vitronectin. These results suggest the importance of sequence, structure and conformation of the peptide, which may play a crucial function in the ligand/receptor interaction and/or in the stability of the interaction.

Adult↗

PubMed2002

Cytocompatibility study of organic matrix extracted from Caribbean coral porites astroides.

Since 1980, natural coral exoskeleton has been widely used as bone graft substitute. Despite numerous in vitro and in vivo studies. there is still a lack of knowledge concerning the organic matrix associated with coral exoskeleton (COM). In fact, some surgical interventions have failed and this has sometimes been attributed to the exoskeleton organic matrix. For others, only amino acids are present in the matrix after coral preparation for clinical use. The objective of this study was to extract the exoskeleton organic matrix to carry out biochemical analysis and study its specific cytocompatibility. Demineralized bone powder (DBP) was used as control. A decalcification process was used to extract COM and DBP. Protein, carbohydrate and glycosaminoglycan analysis was carried out in DBP and COM using classical staining methods. Human bone marrow cells were cultured in the presence of 20, 40, 80, 160 microg of COM or DBP for 24, 48 and 72 h. The methods used to analyze COM and DBP effects were scanning electron microscopy immunocytochemistry, manual cell count, and cyto-compatibility assay (Neutral red and MTT tests). Results showed that in spite of treating coral before clinical use, a COM was present in which GAG, protein and carbohydrate were found. The in vitro cytocompatibility of COM was confirmed for 20 and 40 microg values but was less pronounced for 80 and 160 microg levels.

Alkaline Phosphatase↗

PubMed2002

Effect of HUVEC on human osteoprogenitor cell differentiation needs heterotypic gap junction communication.

Bone development and remodeling depend on complex interactions between bone-forming osteoblasts and other cells present within the bone microenvironment, particularly vascular endothelial cells that may be pivotal members of a complex interactive communication network in bone. Our aim was to investigate the interaction between human umbilical vein endothelial cells (HUVEC) and human bone marrow stromal cells (HBMSC). Cell differentiation analysis performed with different cell culture models revealed that alkaline phosphatase activity and type I collagen synthesis were increased only by the direct contact of HUVEC with HBMSC. This "juxtacrine signaling" could involve a number of different heterotypic connexions that require adhesion molecules or gap junctions. A dye coupling assay with Lucifer yellow demonstrated a functional coupling between HUVEC and HBMSC. Immunocytochemistry revealed that connexin43 (Cx43), a specific gap junction protein, is expressed not only in HBMSC but also in the endothelial cell network and that these two cell types can communicate via a gap junctional channel constituted at least by Cx43. Moreover, functional inhibition of the gap junction by 18alpha-glycyrrhetinic acid treatment or inhibition of Cx43 synthesis with oligodeoxyribonucleotide antisense decreased the effect of HUVEC cocultures on HBMSC differentiation. This stimulation could be mediated by the intercellular diffusion of signaling molecules that permeate the junctional channel.

Bone Marrow Cells↗

PubMed2001

Evaluation of an in vitro endothelialized vascular graft under pulsatile shear stress with a novel radiolabeling procedure.

OBJECTIVE: To improve the hemocompatibility of vascular grafts, endothelial cell (EC) seeding of biomaterials prior to implantation is critical. The current in vitro study was designed to investigate such a feasibility on a collagen-coated heparin-bonded graft and to evaluate cell detachment upon pulsatile shear stress. MATERIALS AND METHODS: Endothelial cells (EA-hy-926) were seeded onto grafts. The endothelialization of the grafts was evaluated by the [3H]-thymidine incorporation, scanning electron microscopy (SEM) and histological examinations. After in situ EC radiolabeling with a novel 99mTc technique, the prostheses were exposed to pulsatile shear stress (0.27 N/m2), mimicking the shear rate occurring in a superficial femoral artery, for 3 h in a flow circuit and EC loss quantified by gamma camera detection. RESULTS: Complete EC coverage was achieved after 5 days. Three hours of artificial perfusion resulted in a low EC loss (12.9+/-0.8%, n = 7). SEM shows EC withstanding shear stress in valleys of prosthesis circumvolutions. CONCLUSIONS: These satisfactory results could be explained by the high affinity of EC for heparinized surfaces in addition to cell surface receptors involved in adhesion to collagen.

Autoradiography↗