PubMed Health⌕ Search

Biomedical subjects

R Benz

Publications and source records attributed to R Benz.

At least 19 recordsLinked to original sources

Cellular uptake of Clostridium botulinum C2 toxin requires oligomerization and acidification.

The actin-ADP-ribosylating binary Clostridium botulinum C2 toxin consists of two individual proteins, the binding/translocation component C2II and the enzyme component C2I. To elicit its cytotoxic action, C2II binds to a receptor on the cell surface and mediates cell entry of C2I via receptor-mediated endocytosis. Here we report that binding of C2II to the surface of target cells requires cleavage of C2II by trypsin. Trypsin cleavage causes oligomerization of the activated C2II (C2IIa) to give SDS-stable heptameric structures, which exhibit a characteristic annular or horseshoe shape and form channels in lipid bilayer membranes. Cytosolic delivery of the enzyme component C2I is blocked by bafilomycin but not by brefeldin A or nocodazole, indicating uptake from an endosomal compartment and requirement of endosomal acidification for cell entry. In the presence of C2IIa and C2I, short term acidification of the extracellular medium (pH 5.4) allows C2I to enter the cytosol directly. Our data indicate that entry of C2 toxin into cells involves (i) activation of C2II by trypsin-cleavage, (ii) oligomerization of cleaved C2IIa to heptamers, (iii) binding of the C2IIa oligomers to the carbohydrate receptor on the cell surface and assembly with C2I, (iv) receptor-mediated endocytosis of both C2 components into endosomes, and finally (v) translocation and release of C2I into the cytosol after acidification of the endosomal compartment.

Acids↗

In vivo and in vitro studies of transmembrane beta-strand deletion, insertion or substitution mutants of the Escherichia coli K-12 maltoporin.

LamB of Escherichia coli K12, also called maltoporin, is an outer membrane protein, which specifically facilitates the diffusion of maltose and maltodextrin through the bacterial outer membrane. Each monomer is composed of an 18-stranded antiparallel beta-barrel. In the present work, on the basis of the known X-ray structure of LamB, the effects of modifications of the beta-barrel domain of maltoporin were studied in vivo and in vitro. We show that: (i) the substitution of the pair of strands beta13-beta14 of the E. coli maltoporin with the corresponding pair of strands from the functionally related maltoporin of Salmonella typhimurium yielded a protein active in vivo and in vitro; and (ii) the removal of one pair of beta-strands (deletion beta13-beta14) from the E. coli maltoporin, or its replacement by a pair of strands from the general porin OmpF of E. coli, leads to recombinant proteins that lost in vivo maltoporin activities but still kept channel formation and carbohydrate binding in vitro. We also inserted into deletion beta13-beta14 the portion of the E. coli LamB protein comprising strands beta13 to beta16. This resulted in a protein expected to have 20 beta-strands and which completely lost all LamB-specific activities in vivo and in vitro.

Amino Acid Sequence↗

Biochemical identification and biophysical characterization of a channel-forming protein from Rhodococcus erythropolis.

Organic solvent extracts of whole cells of the gram-positive bacterium Rhodococcus erythropolis contain a channel-forming protein. It was identified by lipid bilayer experiments and purified to homogeneity by preparative sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis (PAGE). The pure protein had a rather low molecular mass of about 8.4 kDa, as judged by SDS-PAGE. SDS-resistant oligomers with a molecular mass of 67 kDa were also observed, suggesting that the channel is formed by a protein oligomer. The monomer was subjected to partial protein sequencing, and 45 amino acids were resolved. According to the partial sequence, the sequence has no significant homology to known protein sequences. To check whether the channel was indeed localized in the cell wall, the cell wall fraction was separated from the cytoplasmic membrane by sucrose step gradient centrifugation. The highest channel-forming activity was found in the cell wall fraction. The purified protein formed large ion-permeable channels in lipid bilayer membranes with a single-channel conductance of 6.0 nS in 1 M KCl. Zero-current membrane potential measurements with different salts suggested that the channel of R. erythropolis was highly cation selective because of negative charges localized at the channel mouth. The correction of single-channel conductance data for negatively charged point charges and the Renkin correction factor suggested that the diameter of the cell wall channel is about 2.0 nm. The channel-forming properties of the cell wall channel of R. erythropolis were compared with those of other members of the mycolata. These channels have common features because they form large, water-filled channels that contain net point charges.

Cell Membrane Permeability↗

An amphipathic alpha-helix including glutamates 509 and 516 is crucial for membrane translocation of adenylate cyclase toxin and modulates formation and cation selectivity of its membrane channels.

The Bordetella pertussis adenylate cyclase toxin-hemolysin (ACT or CyaA) is a multifunctional protein. It forms small cation-selective channels in target cell and lipid bilayer membranes and it delivers into cell cytosol the amino-terminal adenylate cyclase (AC) domain, which catalyzes uncontrolled conversion of ATP to cAMP and causes cell intoxication. Here, we demonstrate that membrane translocation of the AC domain into cells is selectively dissociated from ACT membrane insertion and channel formation when a helix-breaking proline residue is substituted for glutamate 509 (Glu-509) within a predicted transmembrane amphipathic alpha-helix. Neutral substitutions of Glu-509 had little effect on toxin activities. In contrast, charge reversal by lysine substitutions of the Glu-509 or of the adjacent Glu-516 residue reduced the capacity of the toxin to translocate the AC domain across membrane and enhanced significantly its specific hemolytic activity and channel forming capacity in lipid bilayer membranes. Combination of the E509K and E516K mutations in a single molecule further exacerbated hemolytic and channel forming activity and ablated translocation of the AC domain into cells. The lysine substitutions strongly decreased the cation selectivity of the channels, indicating that Glu-509 and Glu-516 are located within or close to the membrane channel. These results suggest that the structure including glutamate residues 509 and 516 is critical for AC membrane translocation and channel forming activity of ACT.

Adenylate Cyclase Toxin↗

Properties of a cyclodextrin-specific, unusual porin from Klebsiella oxytoca.

The function of CymA, 1 of the 10 gene products involved in cyclodextrin uptake and metabolism by Klebsiella oxytoca, was characterized. CymA is essential for growth on cyclodextrins, but it can also complement the deficiency of a lamB (maltoporin) mutant of Escherichia coli for growth on linear maltodextrins, indicating that both cyclic and linear oligosaccharides are accepted as substrates. CymA was overproduced in E. coli and purified to apparent homogeneity. CymA is a component of the outer membrane, is processed from a signal peptide-containing precursor, and possesses a high content of antiparallel beta-sheet. Incorporation of CymA into lipid bilayers and conductance measurements revealed that it forms ion-permeable channels, which exhibit a substantial current noise. CymA-induced membrane conductance decreased considerably upon addition of alpha-cyclodextrin. Titration experiments allowed the calculation of a half-saturation constant, K(S), of 28 microM for its binding to CymA. CymA assembled in vitro to two-dimensionally crystalline tubular membranes, which, on electron microscopy, are characterized by a p1-related two-sided plane group. The crystallographic unit cell contains four monomeric CymA molecules showing a central pore. The lattice parameters are a = 16.1 nm, b = 3.8 nm, gamma = 93 degrees. CymA does not form trimeric complexes in lipid membranes and shows no tendency to trimerize in solution. CymA thus is an atypical porin with novel properties specialized to transfer cyclodextrins across the outer membrane.

Amino Acid Sequence↗

Evidence for a small anion-selective channel in the cell wall of Mycobacterium bovis BCG besides a wide cation-selective pore.

Two channels were observed in extracts of whole Mycobacterium bovis BCG cells using organic solvents and detergents. The channels derived from organic solvent treatment had a single-channel conductance of about 4.0 nS in 1 M KCl in lipid bilayer membranes with properties similar to those of the channels discovered previously in Mycobacterium smegmatis and Mycobacterium chelonae. The channel was in its open configuration only at low transmembrane potentials. At higher voltages it switched to closed states that were almost impermeable for ions. Lipid bilayer experiments in the presence of detergent extracts of whole cells revealed another channel with a single-channel conductance of only 780 pS in 1 M KCl. Our results indicate that the mycolic acid layer of M. bovis BCG contains two channels, one is cation-selective and its permeability properties can be finely controlled by cell wall asymmetry or potentials. The other one is anion-selective, has a rather small single-channel conductance and is voltage-insensitive. The concentration of channel-forming proteins in the cell wall seems to be small, which is in agreement with the low cell wall permeability for hydrophilic solutes.

Anions↗

Influence of proline residues on the antibacterial and synergistic activities of alpha-helical peptides.

To investigate the influence of proline residues on the activity of alpha-helical peptides, variants were synthesized with insertions of proline residues to create peptides without proline, or with one or two prolines. The influence of the proline-induced bends was assessed by circular dichroism in the presence of liposomes, and the ability of the peptides to kill microorganisms, to permeabilize the outer and cytoplasmic membranes of Escherichia coli, to bind to liposomes, to form channels in planar lipid bilayers, and to synergize with conventional antibiotics. Representative peptides adopted alpha-helical conformations in phosphatidylcholine/phosphatidylglycerol (POPC/POPG, 7:3) liposomes as well as in 60% trifluoroethanol solution, as revealed by circular dichroism (CD) spectroscopy. However, the percent of helicity decreased as the number of proline residues increased. Tryptophan fluorescence spectroscopy showed that all of these peptides inserted into the membranes of liposomes as indicated by a blue shift in the emission maximum and an increase in the fluorescence intensity of the single tryptophan at residue 2. Quenching experiments further prove that the tryptophan residue was no longer accessible to the aqueous quencher KI. The peptide that lacked proline exhibited the highest activity [minimal inhibitory concentrations (MICs) of 0.5-4 microg/mL] against all tested Gram-negative and Gram-positive bacteria, but was hemolytic at 8 microg/mL. The single-proline peptides exhibited intermediate antibacterial activity. Peptides with two proline residues were even less active with moderate MICs only against E. coli. With only one exception from each group, the peptides were nonhemolytic. The ability of the peptides to demonstrate synergy in combination with conventional antibiotics increased as the antibacterial effectiveness decreased. All peptides bound to bacterial lipopolysaccharide and permeabilized the outer membrane of E. coli to similar extents. However, their ability to permeabilize the cytoplasmic membrane of E. coli as assessed by the unmasking of cytoplasmic beta-galactosidase decreased substantially as the number of proline residues increased. Correspondingly, increasing the number of proline residues caused a decreased ability to form channels in planar lipid bilayers, and the hemolytic, proline-free peptide tended to cause rapid breakage of planar membranes. Thus, the number of bends created by insertion of proline residues is an important determinant of antimicrobial, hemolytic, and synergistic activity.

Amino Acid Sequence↗

Mechanism of interaction of different classes of cationic antimicrobial peptides with planar bilayers and with the cytoplasmic membrane of Escherichia coli.

Antimicrobial cationic peptides are prevalent throughout nature as part of the intrinsic defenses of most organisms, and have been proposed as a blueprint for the design of novel antimicrobial agents. They are known to interact with membranes, and it has been frequently proposed that this represents their antibacterial target. To see if this was a general mechanism of action, we studied the interaction, with model membranes and the cytoplasmic membrane of Escherichia coli, of 12 peptides representing all 4 structural classes of antimicrobial peptides. Planar lipid bilayer studies indicated that there was considerable variance in the interactions of the peptides with model phospholipid membranes, but generally both high concentrations of peptide and high transmembrane voltages (usually -180 mV) were required to observe conductance events (channels). The channels observed for most peptides varied widely in magnitude and duration. An assay was developed to measure the interaction with the Escherichia coli cytoplasmic membrane employing the membrane potential sensitive dye 3,5-dipropylthiacarbocyanine in the outer membrane barrier-defective E. coli strain DC2. It was demonstrated that individual peptides varied widely in their ability to depolarize the cytoplasmic membrane potential of E. coli, with certain peptides such as the loop peptide bactenecin and the alpha-helical peptide CP26 being unable to cause depolarization at the minimal inhibitory concentration (MIC), and others like gramicidin S causing maximal depolarization below the MIC. We discuss the mechanism of interaction with the cytoplasmic membrane in terms of the model of Matsuzaki et al. [(1998) Biochemistry 37, 15144-15153] and the possibility that the cytoplasmic membrane is not the target for some or even most cationic antimicrobial peptides.

Amino Acid Sequence↗

Ion selectivity reversal and induction of voltage-gating by site-directed mutations in the Paracoccus denitrificans porin.

The porin from Paracoccus denitrificans, a slightly anion specific outer membrane pore protein, was expressed in Escherichia coli, isolated from inclusion bodies, and refolded in the presence of urea and detergents. The purified recombinant protein was reconstituted into black lipid bilayer membranes and showed no difference in its functional properties in comparison to the native porin isolated from P.denitrificans membranes. To investigate the molecular basis of its ion selectivity and voltage-gating, a series of site-directed mutants was constructed, comprising acidic residues located on the third extracellular loop (L3), which forms the constriction zone of the channel, and basic residues along the opposing barrel wall. Measurements using zero-current membrane potentials indicated that the selectivity changed drastically from a slight anion to a distinct cation selectivity with the exchange of residues R29 and R31 by glutamate, whereas replacements on the L3 loop went largely unaffected. However, when assaying the voltage-dependent closure of channels, only mutations located on the L3 loop showed an effect, in contrast to the voltage-independent recombinant and native Paracoccus porin.

Electric Conductivity↗

The cell wall porin of the gram-positive bacterium Nocardia asteroides forms cation-selective channels that exhibit asymmetric voltage dependence.

Detergent-solubilized cell wall extracts of the gram-positive, strictly aerobic bacterium Nocardia asteroides contain channel-forming activity as judged from reconstitution experiments using lipid bilayer membranes. The cell wall porin was identified as a protein with an apparent molecular mass of about 84 kDa based on SDS-PAGE. The porin was purified to homogeneity using preparative SDS-PAGE. The 84-kDa protein was no longer observed after heating in SDS buffer. The presumed dissociation products were not observed on SDS-polyacrylamide gels. The cell wall porin increased the specific conductance of artificial lipid bilayer membranes from phosphatidylcholine/phosphatidylserine mixtures by the formation of cation-selective channels, which had an average single-channel conductance of 3.0 nS in 1 M KCl. The single-channel conductance was only moderately dependent on the bulk aqueous KCl concentration, which indicated negative point charge effects on the channel properties. The analysis of the concentration dependence of the single-channel conductance using the effect of negative charges on channel conductance suggested that the diameter of the cell wall channel is about 1.4 nm. Asymmetric addition of the cell wall porin to lipid bilayer membranes resulted in an asymmetric voltage dependence. The cell wall channel switched into substates, when the cis side of the membrane, the side of the addition of the protein, had negative polarity. Positive potentials at the cis side had no influence on the conductance of the cell wall channel.

Cell Membrane Permeability↗

Interaction of phloretin with lipid monolayers: relationship between structural changes and dipole potential change.

Phloretin is known to adsorb to lipid surfaces and alters the dipole potential of lipid monolayers and bilayers. Its adsorption to biological and artificial membranes results in a change of the membrane permeability for a variety of charged and neutral compounds. In this respect phloretin represents a model substance to study the effect of dipole potentials on membrane permeability. In this investigation we studied the interaction of phloretin with monolayers formed of different lipids in the liquid-expanded and the condensed state. Phloretin integrated into the monolayers as a function of the aqueous concentration of its neutral form, indicated by an increase of the surface pressure in the presence of phloretin. Simultaneous recording of the surface potential of the monolayers allowed us to correlate the degree of phloretin integration and the phloretin-induced dipole potential change. Increasing the surface pressure decreased the phloretin-induced shift of the isotherms, but did not influence the phloretin-induced surface potential change. This means that phloretin adsorption to the lipid surface can occur without affecting the lipid packing. The surface potential effect of phloretin is accompanied by a change of the lipid dipole moment vector dependent on the lipid packing. This means that the relation between the surface potential change and the lipid packing cannot be described by a static model alone. Taking into account the deviations of the surface potential change versus molecular area isotherms of the experimental data to the theoretically predicted course, we propose a model that relates the area change to the dipole moment in a dynamic manner. By using this model the experimental data can be described much better than with a static model.

1,2-Dipalmitoylphosphatidylcholine↗

The gene bglH present in the bgl operon of Escherichia coli, responsible for uptake and fermentation of beta-glucosides encodes for a carbohydrate-specific outer membrane porin.

The cryptic gene bglH from the Escherichia coli chromosome was cloned into a tacOP-driven expression vector. The resulting plasmid was transferred into the porin-deficient E. coli strain KS26 and the protein was expressed by addition of IPTG. The BglH protein was localized in the outer membrane. It was purified to homogeneity using standard methods. Reconstitution experiments with lipid bilayer membranes defined BglH as a channel-forming component, i.e. it is an outer membrane porin. The single-channel conductance of BglH (560 pS in 1 M KCl) was only one-third of that of the general diffusion porins of E. coli outer membrane. The presence of carbohydrates in the aqueous phase led to a dose-dependent block of ion transport through the channel, similar to that found for LamB (maltoporin) of E. coli and Salmonella typhimurium, which means that BglH is a porin specific for the uptake of carbohydrates. The binding constants of a variety of different carbohydrates were calculated from titration experiments of the BglH-induced membrane conductance. The tightest binding was observed with the aromatic beta-D-glucosides arbutin and salicin, and with gentibiose and cellobiose. Binding of maltooligosaccharides to BglH was in contrast to their binding to LamB in that it was much weaker, indicating that the binding site of BglH for carbohydrates is different from that of LamB (maltoporin). The kinetics of cellopentaose binding to BglH was investigated using the carbohydrate-induced current noise and was compared with that of cellopentaose binding to LamB (maltoporin) and ScrY (sucroseporin).

Amino Acid Sequence↗

Analysis of the SlyA-controlled expression, subcellular localization and pore-forming activity of a 34 kDa haemolysin (ClyA) from Escherichia coli K-12.

Escherichia coli K-12 harbours a chromosomal gene, clyA (sheA, hlyE), that encodes a haemolytic 34 kDa protein. Recombinant E. coli overexpressing the cloned clyA gene accumulated this haemolysin in the periplasm and released only very small amounts of it into the external medium. The secretion of ClyA was confined to the log phase and paralleled by the partial release of several other periplasmic proteins. Sequencing of ClyA revealed the translational start point of the clyA gene and demonstrated that the clyA gene product is not N-terminally processed during transport. The transcription of clyA from its native promoter region was positively controlled by SlyA, a regulatory protein found in E. coli, Salmonella typhimurium and other Enterobacteriaceae. SlyA-controlled transcription started predominantly 72 bp upstream from clyA, as shown by primer extension. The corresponding putative promoter contains an unusual -10 sequence (TATGAAT) that is separated from a conventional -35 sequence by a GC-rich spacer. Site-directed deletion of the G in the -10 sequence abrogated the SlyA requirement for strong ClyA production, whereas a reduction in the G + C content of the spacer diminished the capability of SlyA to activate the clyA expression. Osmotic protection assays and lipid bilayer experiments suggested that ClyA forms stable, moderately cation-selective transmembrane pores that have a diameter of about 2.5-3 nm.

Bacterial Proteins↗

In vivo and in vitro studies of major surface loop deletion mutants of the Escherichia coli K-12 maltoporin: contribution to maltose and maltooligosaccharide transport and binding.

The trimeric protein LamB of Escherichia coli K-12 (maltoporin) specifically facilitates the diffusion of maltose and maltooligosaccharides through the outer membrane. Each monomer consists of an 18-stranded antiparallel beta-barrel with nine surface loops (L1 to L9). The effects on transport and binding of the deletion of some of the surface loops or of combinations of several of them were studied in vivo and in vitro. In vivo, single-, DeltaL4, DeltaL5, DeltaL6, and double-loop deletions, DeltaL4 + DeltaL5 and DeltaL5 + DeltaL6, abolished maltoporin functions, but not the double deletion DeltaL4 + DeltaL6 and the triple deletion DeltaL4 + DeltaL5 + DeltaL6. While deletion of the central variable portion of loop L9 (DeltaL9v) affected maltoporin function only moderately, the combination of DeltaL9v with the double deletion of loops L4 and L6 (triple deletion DeltaL4 + DeltaL6 + DeltaL9v) strongly impaired maltoporin function and resulted in sensitivity to large hydrophilic antibiotics without change in channel size as measured in vitro. In vitro, the carbohydrate-binding properties of the different loop mutants were studied in titration experiments using the asymmetric and symmetric addition of the mutant porins and of the carbohydrates to one or both sides of the lipid bilayer membranes. The deletion of loop L9v alone (LamBDeltaL9v), of two loops L4 and L6 (LamBDeltaL4 + DeltaL6), of three loops L4, L5 and L6 (LamBDeltaL4 + DeltaL5 + DeltaL6) or of L4, L6 and L9v (LamBDeltaL4 + DeltaL6 + DeltaL9v) had relatively little influence on the carbohydrate-binding properties of the mutant channels, and they had approximately similar binding properties for carbohydrate addition to both sides compared with only one side. The deletion of one of the loops L4 (LamBDeltaL4) or L6 (LamBDeltaL6) resulted in an asymmetric carbohydrate binding. The in vivo and in vitro results, together with those of the purification across the starch column, suggest that maltooligosaccharides enter the LamB channel from the cell surface side with the non-reducing end in advance. The absence of some of the loops leads to obstruction of the channel from the outside, which results in a considerable difference in the on-rate of carbohydrate binding from the extracellular side compared with that from the periplasmic side.

Bacitracin↗

The haemolysin-secreting ShlB protein of the outer membrane of Serratia marcescens: determination of surface-exposed residues and formation of ion-permeable pores by ShlB mutants in artificial lipid bilayer membranes.

The ShlB protein in the outer membrane of Serratia marcescens is the only protein known to be involved in secretion of the ShlA protein across the outer membrane. At the same time, ShlB converts ShlA into a haemolytic and a cytolytic toxin. Surface-exposed residues of ShlB were determined by reaction of an M2 monoclonal antibody with the M2 epitope DYKDDDDK inserted at 25 sites along the entire ShlB polypeptide. The antibody bound to the M2 epitope at 17 sites in intact cells, which indicated surface exposure of the epitope, and to 23 sites in isolated outer membranes. Two insertion mutants contained no ShlB(M2) protein in the outer membrane. The ShlB derivatives activated and/or secreted ShlA. To gain insights into the secretion mechanism, we studied whether highly purified ShlB and ShlB deletion derivatives formed pores in artificial lipid bilayer membranes. Wild-type ShlB formed channels with very low single channel conductance that rarely assumed an open channel configuration. In contrast, open channels with a considerably higher single channel conductance were observed with the deletion mutants ShlB(Delta65-186), ShlB(Delta87-153), and ShlB(Delta126-200). ShlB(Delta126-200) frequently formed permanently open channels, whereas the conductance caused by ShlB(Delta65-186) and ShlB(Delta87-153) did not assume a stationary value, but fluctuated rapidly between open and closed configurations. The results demonstrate the orientation of large portions of ShlB in the outer membrane and suggest that ShlB may function as a specialized pore through which ShlA is secreted.

Amino Acid Sequence↗

Cloning of the mspA gene encoding a porin from Mycobacterium smegmatis.

Porins form channels in the mycolic acid layer of mycobacteria and thereby control access of hydrophilic molecules to the cell. We purified a 100 kDa protein from Mycobacterium smegmatis and demonstrated its channel-forming activity by reconstitution in planar lipid bilayers. The mspA gene encodes a mature protein of 184 amino acids and an N-terminal signal sequence. MALDI mass spectrometry of the purified porin revealed a mass of 19 406 Da, in agreement with the predicted mass of mature MspA. Dissociation of the porin by boiling in 80% dimethyl sulphoxide yielded the MspA monomer, which did not form channels any more. Escherichia coli cells expressing the mspA gene produced the MspA monomer and a 100 kDa protein, which had the same channel-forming activity as whole-cell extracts of M. smegmatis with organic solvents. These proteins were specifically detected by a polyclonal antiserum that was raised to purified MspA of M. smegmatis. These results demonstrate that the mspA gene encodes a protein of M. smegmatis, which assembles to an extremely stable oligomer with high channel-forming activity. Database searches did not reveal significant similarities to any other known protein. Southern blots showed that the chromosomes of fast-growing mycobacterial species contain homologous sequences to mspA, whereas no hybridization could be detected with DNA from slow growing mycobacteria. These results suggest that MspA is the prototype of a new class of channel-forming proteins.

Amino Acid Sequence↗

Identification of positively charged residues of FomA porin of Fusobacterium nucleatum which are important for pore function.

FomA porin is the major outer-membrane protein of Fusobacterium nucleatum. It exhibits the functional properties of a general diffusion porin, but has no sequence similarity to other porins. According to the proposed topology model, each monomer of this trimeric protein is a beta-barrel consisting of 16 transmembrane segments with eight surface-exposed loops. Several conserved charged residues are proposed to extend from the beta-barrel wall into the aqueous channel lumen, and may contribute to a transverse electric field similar to that at the pore constriction of porins with known structure. The goal of our study was to identify particular basic residues contributing to such an electric field in FomA. Several arginines and lysines were replaced by negatively charged glutamates or uncharged alanines. The mutated FomA porins were expressed in Escherichia coli, and the effects on pore function were studied in vivo, by assaying the uptake rate of beta-lactam antibiotics, and in vitro after reconstitution of the purified proteins in lipid bilayer membranes. Some of the point mutations had a significant impact on the channel properties. The substitution R92A produced a 130% increased permeability of the zwitterionic beta-lactam cephaloridine, and the cation selectivity of R92E increased by 70%. The effects of the R90E substitution on channel properties were similar. Most of the point mutations had a minor effect on the voltage gating of the FomA channel, resulting in an increased sensitivity, except for K78E, which showed a decreased sensitivity. The latter mutation had no effect on cation selectivity, but the K78A substitution improved the uptake rate of cephaloridine. The results presented here indicate that arginines 90 and 92 are probably part of the constriction zone of the FomA porin, and lysine 78 and arginines 115 and 117 are probably in close proximity to this region as well.

Amino Acid Sequence↗

Mitochondria-derived and extra-mitochondrial human type-1 porin are identical as revealed by amino acid sequencing and electrophysiological characterisation.

In mammalian cells porin channels are localised in both mitochondrial outer membranes and extra-mitochondrial membranes. We isolated mitochondria-derived porin of a human lymphoblastoid B cell line, determined its amino acid sequence and characterised its channel properties. Interestingly, the amino acid sequence of this porin preparation and, correspondingly, its electrophysiological characteristics in a reconstituted system were identical to those of 'Porin 31HL', the human type-1 porin purified from a crude membrane preparation of the same cell line using a different purification protocol. The results raise questions about targeting, insertion and orientation of human type-1 porin in different membranes.

Amino Acid Sequence↗