PubMed Health⌕ Search

Biomedical subjects

R Bos

Publications and source records attributed to R Bos.

At least 37 records · Page 2Linked to original sources

Reduced activity of TAFI (thrombin-activatable fibrinolysis inhibitor) in acute promyelocytic leukaemia.

Acute promyelocytic leukaemia (APL) is a disease that is distinguished from other leukaemias by the high potential for early haemorrhagic death. Several processes are involved, such as disseminated intravascular coagulation and hyperfibrinolysis. Recently, TAFI (thrombin-activatable fibrinolysis inhibitor) was identified as a link between coagulation and fibrinolysis. TAFI can be activated by thrombin, and in its activated form potently attenuates fibrinolysis by removing C-terminal lysine and arginine residues that are important for the binding and activation of plasminogen. Activation of TAFI by the coagulation system results in a down-regulation of fibrinolytic activity and, thereby, prevents a rapid dissolution of the fibrin clot. To establish whether TAFI was involved in the severity of the bleeding complications in APL, the TAFI antigen and activity levels were determined in a group of 15 patients. The TAFI antigen concentration was normal, but the activity of TAFI was severely reduced in APL by approximately 60%. The reduction of TAFI activity was most probably caused by the action of plasmin on TAFI because in vitro experiments revealed that plasmin slightly reduced antigen levels but severely reduced TAFI activity. The acquired functional TAFI deficiency in APL may contribute to the severity of the haemorrhagic diathesis because of the impaired capacity of the coagulation system to protect the fibrin clot from fibrinolysis.

Adult↗

Factor V antigen levels and venous thrombosis: risk profile, interaction with factor V leiden, and relation with factor VIII antigen levels.

Clotting factor V has a dual function in coagulation: after activation, procoagulant factor V stimulates the formation of thrombin, whereas anticoagulant factor V acts as a cofactor for activated protein C (APC) in the degradation of factor VIII/VIIIa, thereby reducing thrombin formation. In the present study, we evaluated whether plasma factor V levels, either decreased or increased, are associated with venous thrombosis. High procoagulant factor V levels may enhance prothrombinase activity and increase the thrombosis risk. Low anticoagulant factor V levels could reduce APC-cofactor activity in the factor VIII inactivation (APC-resistant phenotype), which might also promote thrombosis. Low factor V levels in combination with factor V Leiden could lead to a more severe APC-resistant phenotype (pseudohomozygous APC resistance). To address these issues, we have measured factor V antigen (factor V:Ag) levels in 474 patients with thrombosis and 474 control subjects that were part of the Leiden Thrombophilia Study (LETS). Factor V:Ag levels increased by 7.6 U/dL for every successive 10 years of age. Mean factor V:Ag levels were 134 (range 41 to 305) U/dL in patients and 132 (range 47 to 302) U/dL in controls. Neither high nor low factor V:Ag levels were associated with venous thrombosis. We found that factor V:Ag and factor VIII antigen levels in plasma were correlated, but factor V did not modify the thrombotic risk of high factor VIII levels. The normalized APC ratio was not influenced by the factor V:Ag level in subjects with or without factor V Leiden. We conclude that neither low nor high factor V:Ag levels are associated with venous thrombosis and that factor V:Ag levels do not mediate the thrombotic risk associated with high factor VIII levels.

Adolescent↗

Elastase mediated fibrinolysis in acute promyelocytic leukemia.

The bleeding syndrome of acute promyelocytic leukemia (APL) is complex and consists of disseminated intravascular coagulation (DIC) and hyperfibrinolysis. Elastase, derived from malignant promyelocytes, is believed to mediate the fibrinogeno- and fibrinolysis by aspecific proteolysis. In this study we measured the role of elastase in fifteen patients with APL by using an assay for elastase degraded fibrin(ogen) and the results were compared with those obtained in patients with sepsis induced DIC. High levels of elastase were observed in sepsis and APL. The levels of fibrinogen and fibrin degradation products were significantly higher in APL patients compared to patients with sepsis induced DIC. Nevertheless, the level of elastase degraded fibrin(ogen) was higher in the sepsis group (635.3 ng/ml, compared to 144.3 ng/ml in APL; p <0.0001). So, the enormous increase in fibrin and fibrinogen degradation products in APL cannot be explained by elastase activity. This study suggests a minor role for elastase mediated proteolysis in the hemorrhagic diathesis in APL patients.

Adult↗

Deposition of Oral Bacteria and Polystyrene Particles to Quartz and Dental Enamel in a Parallel Plate and Stagnation Point Flow Chamber.

The aim of this paper is to determine to what extent (i) deposition of oral bacteria and polystyrene particles, (ii) onto quartz and dental enamel with and without a salivary conditioning film, (iii) in a parallel plate (PP) and stagnation point (SP) flow chamber and at common Peclet numbers are comparable. All three bacterial strains showed different adhesion behaviors, and even Streptococcus mitis BMS, possessing a similar cell surface hydrophobicity as polystyrene particles, did not mimic polystyrene particles in its adhesion behavior, possibly as a result of the more negative zeta potentials of the polystyrene particles. The stationary endpoint adhesion of all strains, including polystyrene particles, was lower in the presence of a salivary conditioning film, while also desorption probabilities under flow were higher in the presence of a conditioning film than in its absence. Deposition onto quartz and enamel surfaces was different, but without a consistent trend valid for all strains and polystyrene particles. It is concluded that differences in experimental results exist, and the process of bacterial deposition to enamel surfaces cannot be modeled by using polystyrene particles and quartz collector surfaces. Copyright 1999 Academic Press.

Journal Article↗

Surface Aggregation of Candida albicans on Glass in the Absence and Presence of Adhering Streptococcus gordonii in a Parallel-Plate Flow Chamber: A Surface Thermodynamical Analysis Based on Acid-Base Interactions.

Adhesive interactions between yeasts and bacteria are important in the maintenance of infectious mixed biofilms on natural and biomaterial surfaces in the human body. In this study, the extended DLVO (Derjaguin-Landau-Verwey-Overbeek) approach has been applied to explain adhesive interactions between C. albicans ATCC 10261 and S. gordonii NCTC 7869 adhering on glass. Contact angles with different liquids and the zeta potentials of both the yeasts and bacteria were determined and their adhesive interactions were measured in a parallel-plate flow chamber.Streptococci were first allowed to adhere to the bottom glass plate of the flow chamber to different seeding densities, and subsequently deposition of yeasts was monitored with an image analysis system, yielding the degree of initial surface aggregation of the adhering yeasts and their spatial arrangement in a stationary end point. Irrespective of growth temperature, the yeast cells appeared uncharged in TNMC buffer, but yeasts grown at 37 degrees C were intrinsically more hydrophilic and had an increased electron-donating character than cells grown at 30 degrees C. All yeasts showed surface aggregation due to attractive Lifshitz-van der Waals forces. In addition, acid-base interactions between yeasts, yeasts and the glass substratum, and yeasts and the streptococci were attractive for yeasts grown at 30 degrees C, but yeasts grown at 37 degrees C only had favorable acid-base interactions with the bacteria, explaining the positive relationship between the surface coverage of the glass by streptococci and the surface aggregation of the yeasts. Copyright 1999 Academic Press.

Journal Article↗

Inactivation of single-chain urokinase-type plasminogen activator by thrombin in human subjects.

Thrombin cleaves single-chain urokinase-type plasminogen activator (scu-PA) into a virtually inactive two-chain form (tcu-PA/T), a process that may protect a blood clot from early fibrinolysis. It is not known under what circumstances tcu-PA/T can be generated in vivo. We have studied the occurrence of tcu-PA/T in human subjects with a varying degree of hypercoagulability. tcu-PA/T was assessed in the plasma of patients with disseminated intravascular coagulation (DIC), endotoxin-treated volunteers, patients with unstable angina pectoris, and patients selected for hip replacement. Relationships between tcu-PA/T and several markers reflecting thrombin generation were examined. tcu-PA/T was observed only in the plasma of patients with DIC and was associated with all thrombin markers and with scu-PA and urokinase antigen. Prothrombin fragment 1 + 2 and urokinase antigen were independent predictors of tcu-PA/T. The fact that tcu-PA/T could not be detected in the other three groups was explained by a lower extent of thrombin generation, a greater inhibition of thrombin by antithrombin, or less available urokinase antigen in these groups. The contribution of scu-PA to total urokinase antigen was decreased in the patients with DIC because of inactivation by thrombin, which may be an additional explanation for the inadequate fibrinolysis observed in these patients. These findings show that scu-PA can be inactivated in the circulation under severe pathophysiologic circumstances and that the process of inactivation depends not only on the generation of thrombin but also on the control of thrombin activity by its inhibitor antithrombin.

Angina Pectoris↗

Measurement of charge transfer during bacterial adhesion to an indium tin oxide surface in a parallel plate flow chamber.

An experimental method is described for the measurement of charge transfer during bacterial adhesion in situ to a transparent, semiconducting indium tin oxide (ITO) coated glass plate in a parallel plate flow chamber. Bacterial adhesion is measured simultaneously with either the electric potential or the capacitance of the surface. Initial bacterial adhesion was accompanied by a change in electric potential of the surface with no measurable change in capacitance. Consequently, it can be assumed that the change in electric potential of the surface is due to charge transfer between bacteria and the surface, and it can be calculated that, on average, a charge of about 10(-14) C per bacterium is exchanged during initial adhesion, which corresponds to only several percent of the total surface charge of a bacterium. Charge transfer could either be to or from the bacterial cell surface, dependent on the bacterial strain involved and the ionic strength used.

Actinomyces↗

Adhesion and surface-aggregation of Candida albicans from saliva on acrylic surfaces with adhering bacteria as studied in a parallel plate flow chamber.

Adhesive interactions between Candida albicans and oral bacteria are generally thought to play a crucial role in the microbial colonization of denture acrylic, which may lead to denture stomatitis. This study investigated the influence of saliva on the adhesive interactions between C. albicans and Streptococcus sanguis or Actinomyces naeslundii on denture acrylic. First, bacteria were allowed to adhere to the acrylic surface from a flowing suspension, and subsequently yeasts were flowed over the acrylic surface. The organisms were assayed in the presence or absence of human whole saliva. All experiments were carried out in a parallel plate flow chamber and enumeration was done in situ with an image analysis system. In the absence of adhering bacteria, adhesion of C. albicans from buffer was more extensive than from saliva. However, in the presence of adhering bacteria, yeast adhesion from saliva was increased with respect to adhesion of yeasts from buffer, indicating that specific salivary components constitute a bridge between bacteria and yeasts. In all cases, yeast aggregates consisting of 3 to 5 yeast cells were observed adhering to the surface. A surface physico-chemical analysis of the microbial cell surfaces prior to and after bathing the microorganisms in saliva, suggests that this bridging is mediated by acid-base interactions since all strains show a major increase in electron-donating surface free energy parameters upon bathing in saliva, with no change in their zeta potentials. The surface physico-chemical analysis furthermore suggests that S. sanguis and A. naeslundii may use a different mechanism for adhesive interactions with C. albicans in saliva.

Acrylic Resins↗

Three dimensional registration of mechanical bladder activity using polystyrene fluorescent spheres: A technical note.

Optical marker tracing methods have been applied successfully in recent years to quantify local material deformation of heart tissue, skin and striated muscles. In this study, polystyrene fluorescent spheres (d = 0.6 mm) are glued to the ventral serosal bladder wall in the rabbit. Three dimensional video registration of the polystyrene spheres is used to calculate two directions of principal strain (epsilon (1), epsilon (2) ) on the bladder surface in vivo. The aim is to investigate the feasibility of the technique for this new application in two experimental circumstances: during spontaneous bladder wall activity and after electrical stimulation of bladder innervating nerve fibers. During spontaneous activity, random contraction and relaxation occurred simultaneously and separately across the bladder wall for the two principal strains epsilon (1) and epsilon (2). After extradural electrical stimulation of sacral nerve root S2, the principal strains epsilon ( 1) and epsilon (2) synchronized in time in such a way that epsilon ( 1) and epsilon (2) both represented contraction or both represented relaxation. One and the same bladder wall area passed through phases of contraction followed by relaxation and vice versa. After multiple stimulation periods, the coordination between the two principal strains during stimulation was reduced. This technique allows to identify local areas of contraction and relaxation in the intact bladder wall in vivo. Three dimensional video registration of polystyrene fluorescent spheres to study bladder wall contraction and its relaxation proved to be a feasible technique, with which electrical stimulation effects and spontaneous activity could be measured.

Animals↗

Influence of aeration of Candida albicans during culturing on their surface aggregation in the presence of adhering Streptococcus gordonii.

Candida albicans surfaces are extremely sensitive to changes in growth conditions. In this study, adhesion to glass of aerated and non-aerated C. albicans ATCC 10261 in the presence and absence of adhering Streptococcus gordonii NCTC 7869 was determined in a parallel plate flow chamber. In addition, the influence of aeration on the yeast cell surface hydrophobicity, surface charge, and elemental cell surface composition was measured. S. gordonii adhering at the glass surface caused a reduction in the initial deposition rate of C. albicans, regardless of aeration. In a stationary end-point, only adhesion of non-aerated C. albicans was suppressed by the adhering S. gordonii. Non-aerated yeasts had a higher O/C elemental surface concentration ratio, indicative of cell surface polysaccharides, than aerated yeasts, at the expense of nitrogen-rich cell surface proteins. Both yeasts were essentially uncharged, but the nitrogen-rich cell surface of aerated yeasts had a slightly higher water contact angle than non-aerated yeasts. Summarizing, this study suggests that highly localized, hydrophobic cell surface proteins on C. albicans are a prerequisite for their interaction with adhering streptococci.

Aerobiosis↗

Physico-chemistry of initial microbial adhesive interactions--its mechanisms and methods for study.

In this review, initial microbial adhesive interactions are divided into adhesion to substratum surfaces, coaggregation between microbial pairs and co-adhesion between sessile and planktonic microorganisms of different strains or species. The physico-chemical mechanisms underlying the adhesive interactions are described and a critical review is given of currently employed methods to study microbial adhesive interactions, with an emphasis on the use of the parallel plate flow chamber. Subsequently, for each of the three microbial adhesive interactions distinguished, the role of Lifshitz-van der Waals, acid-base and electrostatic interactions is described based on existing literature.

Bacterial Adhesion↗

A new enzyme immunoassay for soluble fibrin in plasma, with a high discriminating power for thrombotic disorders.

Fibrin formation is a multistep process initiated by thrombin. At first thrombin converts fibrinogen to fibrin molecules which in vivo form soluble complexes with fibrinogen. Soluble fibrin is considered to be an early biochemical marker for intravascular fibrin formation and impending thrombotic events, such as deep venous thrombosis (DVT), pulmonary embolism (PE) and disseminated intravascular coagulopathy (DIC). A new enzyme immunoassay (EIA) was developed on the basis of a monoclonal antibody directed against a fibrin specific neo-epitope located on the gamma-chain of fibrinogen; gamma-(312-324). In addition, it was possible to prepare a lyophilized reference material of thrombin-generated soluble fibrin, that allowed for full antigen recovery after reconstitution with buffer. Assay conditions, e.g. solid phase-Ig concentration and buffer composition, sample and conjugate dilution, and incubation times were optimised. The present assay was found to be specific (no interference of homologous antigens) and reproducible (intra-assay CV 4-8%, interassay CV 4-9%), and therefore highly suited for measuring soluble fibrin levels in a plasma milieu. The median normal value for soluble fibrin was determined in plasma samples obtained from apparently healthy volunteers (n = 81) and found to be 0.040 microg/ml, with a range (10-90 percentiles) of 0.026-0.059 microg/ml. A retrospective study showed that soluble fibrin levels were highly significantly increased in patients with a confirmed diagnosis of DIC (median 1.042 microg FEU/ml, range 0.160-2.319 microg/ml, n = 21, P<0.0001 vs. normal). PE (median 0.527 microg FEU/ml, range 0.084-1.234 microg/ml, n = 29, P<0.0001 vs normal) and DVT (median 0.126 microg FEU/ml, range 0.059-0.878 microg/ml, n = 36, P<0.0001 vs. normal), as determined by the Mann-Whitney U-Test.

Fibrin↗

'Soft-particle' analysis of the electrophoretic mobility of a fibrillated and non-fibrillated oral streptococcal strain: Streptococcus salivarius.

The electrophoretic mobility of microbial cell surfaces can be analysed in terms of a so-called soft layer model, in which the electrophoretic mobility is described as originating from the potentials over the surface charge layer and the membrane fixed charges. Often, the polyelectrolyte layer deforms under the influence of ionic strength variations. In the soft layer analysis of electrophoretic mobilities this is expressed in the softness 1/lambda. Here, we determined the softness of two oral streptococcal strains, S. salivarius HB and HBC12 from particulate microelectrophoresis in KCl solutions of varying ionic strength. Electron microscopy of negatively-stained organisms and X-ray photoelectron spectroscopy showed that strain HB had several classes of proteinaceous fibrils with lengths up to 178 nm on its outermost surface, while variant HBC12 had a bald, peptidoglycan-rich outer surface. The fibrillated strain HB appeared as relatively soft (1/lambda equals 1.4 nm) from analysis of its electrophoretic mobility, while the bald variant HBC12 was hard (1/lambda equals 0.7 nm) due to its comparatively rigid, peptidoglycan-rich outer surface, characteristic to Gram-positive bacteria. The presence of proteinaceous fibrils on strain HB slightly shielded the membrane fixed charges on HBC12.

Electrophoresis↗

Lateral and perpendicular interaction forces involved in mobile and immobile adhesion of microorganisms on model solid surfaces.

Gliding and near-surface swimming of microorganisms are described as a mobile form of microbial adhesion that need not necessarily be reversible. It is argued that the reversibility of microbial adhesion depends on the depth of the secondary interaction minimum, calculated from the forces between an organism and a substratum acting in a direction perpendicular to the substratum surface. The mobility of adhering microorganisms depends on lateral interactions between the organisms. On ideally homogeneous and smooth model surfaces, only mobile adhesion occurs because the multibody, lateral interactions are weak compared with the thermal or Brownian motion energy of the organisms. Minor chemical or structural heterogeneities, which exist on all real-life surfaces, yield a lateral interaction on adhering microorganisms. This causes their immobilization, which helps to explain the physicochemical nature of microbial gliding or near-surface swimming. Moreover, these lateral interaction energies are one order of magnitude smaller than the Lifshitz-Van der Waals, electrostatic, and acid-base forces acting perpendicular to substratum surfaces that are responsible for adhesion.

Bacterial Adhesion↗

Seasonal variation of the essential oil, valerenic acid and derivatives, and velopotriates in Valeriana officinalis roots and rhizomes, and the selection of plants suitable for phytomedicines.

During the seasons 1989-1993, Valeriana officinalis plants were investigated for their contents of essential oil, valerenic acid and derivatives, and valepotriates. Harvesting of the subterranean parts was started in August of the year in which the seeds were sown, and continued until the last week of April of the subsequent year. Despite marked variations from year to year, the maximum contents of essential oil in the subterranean parts of V. officinalis were found in September, ranging from 1.2% to 2.1% (v/w) based on dry weight (DW). Over the vegetation periods investigated, the composition of the oil remained more or less constant. Valerenic acid and its derivatives, and the valepotriates reached their maxima in February-March, with contents of 0.7-0.9% (DW) and 1.1-1.4% (DW), respectively. During the period 1989 - 1993, five V. officinalis strains were investigated for their contents of essential oil, valerenic acid and derivatives, and valepotriates in order to select plants suitable for phytomedicines. The selection procedures described in this paper finally yielded plant material (in 1993) with a satisfactory content of essential oil (0.9%) combined with a high content of valerenic acid and derivatives (0.5%) which can be harvested in September of the year of sowing.

Indenes↗

Adhesive interactions between medically important yeasts and bacteria.

Yeasts are being increasingly identified as important organisms in human infections. Adhesive interactions between yeasts and bacteria may contribute to yeast retention at body sites. Methods for studying adhesive interactions between bacterial strains are well known, and range from simple macroscopic methods to flow chamber systems with complex image analysis capabilities. The adhesive interactions between bacteria and yeasts have been studied employing several of the methods originally developed for studying adhesive interactions between bacteria. However, in many of the methods employed the larger size of the yeasts as compared with bacteria results in strong sedimentation of the yeasts, often invalidating the method adapted. In addition, most methods are semi-quantitative and do not properly control mass transport. Consequently, adhesive interaction mechanisms between yeasts and bacteria identified hitherto, including lectin binding and protein-protein interactions, must be regarded with caution. Extensive physico-chemical characteristics of yeast cell surfaces are not available and a physico-chemical mechanism has not yet been put forth. A new method for quantifying adhesive interactions between yeasts and bacteria is proposed, based on the use of a parallel plate flow chamber, in which the influence of adhering bacteria upon the kinetics of yeast adhesion and aggregation of the adhering yeasts is quantitatively evaluated, under carefully controlled mass transport.

Bacteria↗

An enzyme immunoassay for polymorphonuclear leucocyte-mediated fibrinogenolysis.

Upon stimulation, polymorphonuclear leucocytes (PMNs) release potent serine proteases, i.e. elastase, cathepsin G and proteinase 3, which contribute to the degradation of tissue and plasma components. Here, we describe the development of a plasma test to assess PMN-mediated fibrinogenolysis as a biochemical marker for actual PMN-derived proteolysis in vivo, useful for monitoring therapeutic efficacy, i.e. of elastase inhibitors. We generated a monoclonal antibody (MAb), designated 1-1/B3, with a high affinity for elastase-degraded fibrinogen (EDF). The epitope for 1-1/B3 becomes exposed in a time-dependent manner during digestion of fibrinogen with purified PMN-derived serine proteases and with isolated PMNs in vitro. However, 1-1/B3 does not react with plasma fibrinogen or with fibrin(ogen) degradation products generated by plasmin or by other active proteases that may occur locally, i.e. metalloproteases and lysosomal cathepsins. On the basis of MAb 1-1/B3, we developed a plasma test for the assessment of PMN-mediated fibrin(ogen) degradation products (PMN-FDP). In a panel of control plasmas, we observed concentrations of PMN-FDP of 8.2 +/- 0.9 ng mL-1 (n = 18). These values were increased twofold in patients with alpha 1-proteinase inhibitor deficiency (18.6 +/- 3.3 ng mL-1; n = 12; P < 0.0001) and even more in patients with sepsis (365.7 +/- 97.7 ng mL-1; n = 16; P < 0.0001). Furthermore, synovial tissue extracts from patients with rheumatoid arthritis contained increased levels of PMN-FDP, compared with synovial tissue extracts (P < 0.005) from patients with osteoarthritis.

Antibodies, Monoclonal↗