Biomedical subjects

R Brasseur

Publications and source records attributed to R Brasseur.

At least 19 recordsLinked to original sources

PubMed2006

The N-terminal 12 residue long peptide of HIV gp41 is the minimal peptide sufficient to induce significant T-cell-like membrane destabilization in vitro.

Here, we predicted the minimal N-terminal fragment of gp41 required to induce significant membrane destabilization using IMPALA. This algorithm is dedicated to predict peptide interaction with a membrane. We based our prediction of the minimal fusion peptide on the tilted peptide theory. This theory proposes that some protein fragments having a peculiar distribution of hydrophobicity adopt a tilted orientation at a hydrophobic/hydrophilic interface. As a result of this orientation, tilted peptides should disrupt the interface. We analysed in silico the membrane-interacting properties of gp41 N-terminal peptides of different length derived from the isolate BRU and from an alignment of 710 HIV strains available on the Los Alamos National Laboratory. Molecular modelling results indicated that the 12 residue long peptide should be the minimal fusion peptide. We then assayed lipid-mixing and leakage of T-cell-like liposomes with N-terminal peptides of different length as first challenge of our predictions. Experimental results confirmed that the 12 residue long peptide is necessary and sufficient to induce membrane destabilization to the same extent as the 23 residue long fusion peptide. In silico analysis of some fusion-incompetent mutants presented in the literature further revealed that they cannot insert into a modelled membrane correctly tilted. According to this work, the tilted peptide model appears to explain at least partly the membrane destabilization properties of HIV fusion peptide.

Algorithms↗

PubMed2006

Lipid-destabilising properties of a peptide with structural plasticity.

The Chameleon peptide (Cham) is a peptide designed from two regions of the GB1 protein, one folded as an alpha-helix and the other as a beta structure. Depending on the environment, the Cham peptide adopts an alpha or a beta conformation when inserted in different locations of GB1. This environment dependence is also observed for tilted peptides. These short protein fragments, able to destabilise organised system, are mainly folded in beta structure in water and in alpha helix in a hydrophobic environment, like the lipid bilayer. In this paper, we tested whether the Cham peptide can be qualified as a tilted peptide. For this, we have compared the properties of Cham peptide (hydrophobicity, destabilising properties, conformation) to those of tilted peptides. The results suggest that Cham is a tilted peptide. Our study, together the presence of tilted fragments in transconformational proteins, suggests a relationship between tilted peptides and structural lability.

Hydrophobic and Hydrophilic Interactions↗

PubMed2006

PBP5 complementation of a PBP3 deficiency in Enterococcus hirae.

The low susceptibility of enterococci to beta-lactams is due to the activity of the low-affinity penicillin-binding protein 5 (PBP5). One important feature of PBP5 is its ability to substitute for most, if not all, penicillin-binding proteins when they are inhibited. That substitution activity was analyzed in Enterococcus hirae SL2, a mutant whose pbp5 gene was interrupted by the nisRK genes and whose PBP3 synthesis was submitted to nisin induction. Noninduced SL2 cells were unable to divide except when plasmid-borne pbp5 genes were present, provided that the PBP5 active site was functional. Potential protein-protein interaction sites of the PBP5 N-terminal module were mutagenized by site-directed mutagenesis. The T167-L184 region (designated site D) appeared to be an essential intramolecular site needed for the stability of the protein. Mutations made in the two globular domains present in the N-terminal module indicated that they were needed for the suppletive activity. The P197-N209 segment (site E) in one of these domains seemed to be particularly important, as single and double mutations reduced or almost completely abolished, respectively, the action of PBP5.

Enterococcus↗

PubMed2005

"De novo" design of peptides with specific lipid-binding properties.

In this study, we describe an in silico method to design peptides that can be made of non-natural amino acids and elicit specific membrane-interacting properties. The originality of the method holds in the capacities developed to design peptides from any non-natural amino acids as easily as from natural ones, and to test the structure stability by an angular dynamics rather than the currently-used molecular dynamics. The goal of this study was to design a non-natural tilted peptide. Tilted peptides are short protein fragments able to destabilize lipid membranes and characterized by an asymmetric distribution of hydrophobic residues along their helix structure axis. The method is based on the random generation of peptides and their selection on three main criteria: mean hydrophobicity and the presence of at least one polar residue; tilted insertion at the level of the acyl chains of lipids of a membrane; and conformational stability in that hydrophobic phase. From 10,000,000 randomly-generated peptides, four met all the criteria. One was synthesized and tested for its lipid-destabilizing properties. Biophysical assays showed that the "de novo" peptide made of non-natural amino acids is helical either in solution or into lipids as tested by Fourier transform infrared spectroscopy and is able to induce liposome fusion. These results are in agreement with the calculations and validate the theoretical approach.

Animals↗

PubMed2004

Distribution of hydrophobic residues is crucial for the fusogenic properties of the Ebola virus GP2 fusion peptide.

The lipid-destabilizing properties of the N-terminal domain of the GP2 of Ebola virus were investigated. Our results suggest that the domain of Ebola virus needed for fusion is shorter than that previously reported. The fusogenic properties of this domain are related to its oblique orientation at the lipid/water interface owing to an asymmetric distribution of the hydrophobic residues when helical.

Amino Acids↗

PubMed2002

Lipid-interacting properties of the N-terminal domain of human apolipoprotein C-III.

The lipid-interacting properties of the N-terminal domain of human apolipoprotein C-III (apo C-III) were investigated. By molecular modeling, we predicted that the 6-20 fragment of apo C-III is obliquely orientated at the lipid/water interface owing to an asymmetric distribution of the hydrophobic residues when helical. This is characteristic of 'tilted peptides' originally discovered in viral fusion proteins and later in various proteins including some involved in lipoprotein metabolism. Since most tilted peptides were shown to induce liposome fusion in vitro, the fusogenic capacity of the 6-20 fragment of apo C-III was tested on unilamellar liposomes and compared with the well characterized SIV fusion peptide. Mutants were designed by molecular modeling to assess the role of the hydrophobicity gradient in the fusion. FTIR spectroscopy confirmed the predominantly helical conformation of the peptides in TFE solution and also in lipid-peptide complexes. Lipid-mixing experiments showed that the apo C-III (6-20) peptide is able to increase the fluorescence of a lipophilic fluorescent probe. The vesicle fusion was confirmed by core-mixing and leakage assays. The hydrophobicity gradient plays a key role in the fusion process because the mutant with no hydrophobic asymmetry but the same mean hydrophobicity as the wild type does not induce significant lipid fusion. The apo C-III (6-20) fragment is, however, less fusogenic than the SIV peptide, in agreement with their respective mean hydrophobicity. Since lipid fusion should not be the physiological function of the N-terminal domain of apo CIII, we suggest that its peculiar distribution of hydrophobic residues is important for the lipid-binding properties of apo C-III and should be involved in apolipoprotein and lipid exchanges crucial for triglyceride metabolism.

Apolipoprotein C-III↗

PubMed2001

Computational study of lipid-destabilizing protein fragments: towards a comprehensive view of tilted peptides.

Tilted peptides are short sequence fragments (10-20 residues long) that possess an asymmetric hydrophobicity gradient along their sequence when they are helical. Due to this gradient, they adopt a tilted orientation towards a single lipid/water interface and destabilize the lipids. We have detected those peptides in many different proteins with various functions. While being all tilted-oriented at a single lipid/water interface, no consensus sequence can be evidenced. In order to better understand the relationships between their lipid-destabilizing activity and their properties, we used IMPALA to classify the tilted peptides. This method allows the study of interactions between a peptide and a modeled lipid bilayer using simple restraint functions designed to mimic some of the membrane properties. We predict that tilted peptides have access to a wide conformational space in membranes, in contrast to transmembrane and amphipathic helices. In agreement with previous studies, we suggest that those metastable configurations could lead to the perturbation of the acyl chains organization and could be a general mechanism for lipid destabilization. Our results further suggest that tilted peptides fall into two classes: those from proteins acting on membrane behave differently than destabilizing fragments from interfacial proteins. While the former have equal access to the two layers of the membrane, the latter are confined within a single lipid layer. This could be in relation with the organization of lipid substrate on which the peptides physiologically act.

Amino Acid Sequence↗

PubMed2001

Imaging mixed lipid monolayers by dynamic atomic force microscopy.

Phase imaging with tapping mode atomic force microscopy (AFM) and force modulation microscopy were used to probe the mechanical properties of phase-separated lipid monolayers made of a mixture (0.25:0.75) of the surface-active lipopeptide surfactin and of dipalmitoylphosphatidylcholine (DPPC). The pi-A isotherms and the result of a molecular modeling study revealed a loose, 2-D liquid-like organization for the surfactin molecules and a closely packed, 2-D solid-like organization for DPPC molecules. This difference in molecular organization was responsible for a significant contrast in height, tapping mode phase and force modulation amplitude images. Phase imaging at light tapping, i.e., with a ratio of the set-point tapping amplitude with respect to the free amplitude A(sp)/A(0) approximately 0.9, showed larger phase shifts on the solid-like DPPC domains attributed to larger Young's modulus. However, contrast inversion was observed for A(sp)/A(0)<0.7, suggesting that at moderate and hard tapping the image contrast was dominated by the probe-sample contact area. Surprisingly, force modulation amplitude images showed larger stiffness for the liquid-like surfactin domains, suggesting that the contrast was dominated by contact area effects rather than by Young's modulus. These data emphasize the complex nature of the contrast mechanisms of dynamic AFM images recorded on mixed lipid monolayers.

1,2-Dipalmitoylphosphatidylcholine↗

PubMed2001

Is aggregation of beta-amyloid peptides a mis-functioning of a current interaction process?

In a previous study, Hughes et al. [Proc. Natl. Acad. Sci. USA 93 (1996) 2065-2070] demonstrated that the amyloid peptide is able to interact with itself in a two-hybrid system and that interaction is specific. They further supported that the method could be used to define the sequences that might be important in nucleation-dependent aggregation. The sequence of the amyloid peptide can be split into four clusters, two hydrophilic (1-16 and 22-28) and two hydrophobic (17-21 and 29-42). We designed by molecular modeling and tested by the two-hybrid approach, series of mutations spread all over the sequence and changing the distribution of hydrophobicity and/or the spatial hindrance. In the two-hybrid assay, interaction of native Abeta is reproduced. Screening of mutations demonstrates that the C-domain (residues 29-40 (42)), the median domain (residues 17-22) and the N-domain (1-16) are all crucial for interaction. This demonstrates that almost all fragments of the amyloid peptide but a loop (residues 23-28) and the C-term amino acid are important for the native interaction. We support that the folded three-dimensional (3D) structure is the Abeta-Abeta interacting species, that the whole sequence is involved in that 3D fold which has a low secondary structure propensity and a high susceptibility to mutations and thus should have a low stability. The native fold of Abeta could be stabilized in Abeta-Abeta complexes which could in other circumstances facilitate the nucleation event of aggregation that leads to the formation of stable senile plaques.

Amino Acid Sequence↗

PubMed2001

Pex, analytical tools for PDB files. II. H-Pex: noncanonical H-bonds in alpha-helices.

We use the H-Pex (Thomas et al., this issue) to analyze the main chain interactions in 131 proteins. In antiparallel beta-sheets, the geometry of the N...O bond is: median N...O distances, 2.9 SA, C==O...N angles at 154 degrees and the C alpha--C==O...H angles are dispersed around 3 degrees. In some instances, the other side of the C==O axis is occupied by a HC alpha. As recently supported by Vargas et al. (J Am Chem Soc 2000;122:4750-4755) C alpha H...O and NH...O could cooperate to sheet stability. In alpha-helices, the main chain C==O interact with the NH of their n + 4 neighbor on one side, and with a C beta H or C gamma H on the other side. The median O...N distance (3.0 A) and C==N angle (147 degrees) suggest a canonical H-bond, but the C alpha--C==O...H dihedral angle invalidates this option, since the hydrogen attacks the oxygen at 122 degrees, i.e., between the sp(2) and pi orbitals. This supports that the H-bond is noncanonical. In many instances, the C gamma H or the C beta H of the n + 4 residue stands opposite to the NH with respect to the oxygen. Therefore, we propose that, in alpha-helices, the C gamma H or C beta H and the NH of the n + 4 residue hold the oxygen like an electrostatic pincher. Proteins 2001;43:37-44.

Algorithms↗

PubMed2001

Pex, analytical tools for PDB files. I. GF-Pex: basic file to describe a protein.

Pex are created to extract numeric and string descriptions of protein structures from PDB files. This concerns covalent bond lengths and angles, secondary structures, residues in interaction, H-bond lengths and geometry, etc. Several kinds of Pex are generated: (1) general feature (GF-Pex); (2) H-bond (H-Pex); and (3) accessible surface (AS-Pex) and force potential (FP-Pex). We describe the general principles of Pex and detail the GF-Pex files. Using the GF-Pex of 131 proteins, we analyze the mean residue frequencies, the straight phi/psi distribution and the major kinds of secondary structures in proteins. Thomas et al. (this issue) analyzes the main chain H-bonds in those proteins. The GF-Pex and H-Pex files of the 131 proteins can be downloaded from the CBMN site (http://www.fsagx.ac.be/bp/). Proteins 2001;43:28-36.

Algorithms↗

PubMed2001

Translocation of the pAntp peptide and its amphipathic analogue AP-2AL.

The pAntp peptide, corresponding to the third helix of the homeodomain of the Antennapedia protein, enters by a receptor-independent process into eukaryotic cells. The interaction between the pAntp peptide and the phospholipid matrix of the plasma membrane seems to be the first step involved in the translocation mechanism. However, the mechanism by which the peptide translocates through the cell membrane is still not well established. We have investigated the translocation ability of pAntp through a protein-free phospholipid membrane in comparison with a more amphipathic analogue. We show by fluorescence spectroscopy, circular dichroism, NMR spectroscopy, and molecular modeling that pAntp is not sufficiently helically amphipathic to cross a phospholipid membrane of a model system. Due to its primary sequence related to its DNA binding ability in the Antennapedia homeodomain-DNA complex, the pAntp peptide does not belong to the amphipathic alpha-helical peptide family whose members are able to translocate by pore formation.

Amino Acid Sequence↗

PubMed2001

Orientation and effects of mastoparan X on phospholipid bicelles.

Mastoparan X (MPX: INWKGIAAMAKKLL-NH2) belongs to a family of ionophoric peptides found in wasp venom. Upon binding to the membrane, MPX increases the cell's permeability to cations leading to a disruption in the electrolyte balance and cell lysis. This process is thought to occur either through a membrane-thinning mechanism, where the peptide resides on the membrane surface thereby disrupting lipid packing, or through formation of an oligomeric pore. To address this issue, we have used both high-resolution and solid-state 2H NMR techniques to study the structure and orientation of MPX when associated with bicelles. NOESY and chemical shift analysis showed that in bicelles, MPX formed a well-structured amphipathic alpha-helix. In zwitterionic bicelles, the helical axis was found to rest generally perpendicular to the membrane normal, which could be consistent with the "carpet" mechanism for lytic activity. In anionic bicelles, on the other hand, the helical axis was generally parallel to the membrane normal, which is more consistent with the pore model for lytic activity. In addition, MPX caused significant disruption in lipid packing of the negatively charged phospholipids. Taken together, these results show that MPX associates differently with zwitterionic membranes, where it rests parallel to the surface, compared with negatively charged membranes, where it penetrates longitudinally.

Amino Acid Sequence↗

PubMed2001

Prediction of membrane protein orientation in lipid bilayers: a theoretical approach.

Over the past few years, several three-dimensional (3-D) structures of membrane proteins have been described with increasing accuracy, but their relationship with membranes are still not well understood. Recently, we have developed an empirical method, Integral Membrane Protein and Lipid Association (IMPALA), to predict the insertion of molecules (lipids, drugs) into lipid bilayers (Proteins 30 (1998) 357). The IMPALA uses a Monte Carlo minimisation procedure to calculate the depth and the angle of insertion of membrane-interacting molecules taking into account the restraints dictated by a lipid bilayer. In this paper, we use IMPALA to test the insertion of 23 integral membranous proteins (IMPs) and 2 soluble proteins into membranes. Four IMP are studied in detail: OmpA, maltoporin, MsCl channel and bacteriorhodopsin. The 3-D structures of the proteins are kept constant and the insertion into membrane is monitored by minimising the value of the restraint representing the sum of two terms, one for lipid perturbation and the other for hydrophobicity. The two soluble proteins are rejected from the membrane whereas, under the same conditions, all the membrane proteins remain inside, if the solvent accessible surface of the amino acids located inside the pore of porins is ignored. The results give the tilt angle of the IMP helices or strands with respect to the membrane surface and the depth of the protein mass centre insertion. We conclude that the restraint terms of IMPALA could be used to study the insertion of model structures or complexes of proteins within membranes.

Bacterial Proteins↗

PubMed2001

Experimental and conformational analyses of interactions between butenafine and lipids.

Butenafine (N-4-tert-butylbenzyl-N-methyl-1-naphtalenemethylamine hydrochloride) is an antifungal agent of the benzylamine class that has excellent therapeutic efficacy and a remarkably long duration of action when applied topically to treat various mycoses. Given the lipophilic nature of the molecule, efficacy may be related to an interaction with cell membrane phospholipids and permeabilization of the fungal cell wall. Similarly, high lipophilicity could account for the long duration of action, since fixation to lipids in cutaneous tissues might allow them to act as local depots for slow release of the drug. We have therefore used computer-assisted conformational analysis to investigate the interaction of butenafine with lipids and extended these observations with experimental studies in vitro using liposomes. Conformational analysis of mixed monolayers of phospholipids with the neutral and protonated forms of butenafine highlighted a possible interaction with both the hydrophilic and hydrophobic domains of membrane phospholipids. Studies using liposomes demonstrated that butenafine increases membrane fluidity [assessed by fluorescence polarization of 1-(4-trimethylammonium-phenyl)-6-phenyl-1,3,5-hexatriene and 1,6-diphenylhexatriene] and membrane permeability (studied by release of calcein from liposomes). The results show, therefore, that butenafine readily interacts with lipids and is incorporated into membrane phospholipids. These findings may help explain the excellent antifungal efficacy and long duration of action of this drug when it is used as a topical antifungal agent in humans.

Antifungal Agents↗

PubMed2000

The human VPAC1 receptor: three-dimensional model and mutagenesis of the N-terminal domain.

The human VPAC(1) receptor for vasoactive intestinal peptide (VIP) and pituitary adenylate cyclase activating peptide belongs to the class II family of G-protein-coupled receptors with seven transmembrane segments. Like for all class II receptors, the extracellular N-terminal domain of the human VPAC(1) receptor plays a predominant role in peptide ligand recognition. To determine the three-dimensional structure of this N-terminal domain (residues 1-144), the Protein Data Bank (PDB) was screened for a homologous protein. A subdomain of yeast lipase B was found to have 27% sequence identity and 50% sequence homology with the N-terminal domain (8) of the VPAC(1) receptor together with a good alignment of the hydrophobic clusters. A model of the N-terminal domain of VPAC(1) receptor was thus constructed by homology. It indicated the presence of a putative signal sequence in the N-terminal extremity. Moreover, residues (Glu(36), Trp(67), Asp(68), Trp(73), and Gly(109)) which were shown to be crucial for VIP binding are gathered around a groove that is essentially negatively charged. New putatively important residues for VIP binding were suggested from the model analysis. Site-directed mutagenesis and stable transfection of mutants in CHO cells indicated that Pro(74), Pro(87), Phe(90), and Trp(110) are indeed important for VIP binding and activation of adenylyl cyclase activation. Combination of molecular modeling and directed mutagenesis provided the first partial three-dimensional structure of a VIP-binding domain, constituted of an electronegative groove with an outspanning tryptophan shell at one end, in the N-terminal extracellular region of the human VPAC(1) receptor.

Adenylyl Cyclases↗

PubMed2000

The optimisation of the helix/helix interaction of a transmembrane dimer is improved by the IMPALA restraint field.

A continuous membrane model (IMPALA) was previously developed to predict how hydrophobic spans of proteins insert in membranes (Mol. Mod. 2 (1996) 27). Using that membrane model, we looked for the interactions between several hydrophobic spans. We used the glycophorin A dimer as an archetype of polytopic protein to validate the approach. We find that the native complex do not dislocate when it is submitted to a 10(5) steps optimisation whereas separated spans converge back to a native-like complex in the same conditions. We also observe that IMPALA restraints are not strictly mandatory but do increase the efficiency of the procedure.

Algorithms↗

PubMed2000

Interaction between the N-terminal domain of gastric H,K-ATPase and the spectrin binding domain of ankyrin III.

We screened a cDNA bank of rabbit gastric fundic mucosa by two-hybrid assays looking for binding partners of the N-terminal domain of the rabbit gastric H,K-ATPase. We extracted five clones sharing more than 90% sequence identity. The longest clone codes for a protein sharing a high identity (96 and 96.8%, respectively) with a fragment of the membrane domain, from Arg-835 to Ser-873, plus the major part of the "spectrin binding domain" going from Glu-874 to Leu-1455 of human and mouse ankyrin III. We conclude that the membrane and spectrin binding domains of the rabbit ankyrin III are candidates for the binding partner of the N-terminal domain of the rabbit gastric H,K-ATPase. To validate the ankyrin-ATPase interaction and to test its specificity, we produced both domains in yeast and bacteria, coimmunoprecipitated them with an anti-ATPase antibody, and copurified them by affinity chromatography. The sequence of rabbit ankyrin III was not known, and this is the first report demonstrating that the ankyrin III and the H,K-ATPase interact with no intermediate. The interaction involves the N-terminal domain of the ATPase on one hand and the spectrin binding domain of the ankyrin on the other.

Amino Acid Sequence↗