PubMed Health⌕ Search

Biomedical subjects

R C Ewing

Publications and source records attributed to R C Ewing.

10 recordsLinked to original sources
PubMed2006

Structural stability and phase transitions in WO3 thin films.

Tungsten oxide (WO3) thin films have been produced by KrF excimer laser (lambda = 248 nm) ablation of bulk ceramic WO3 targets. The crystal structure, surface morphology, chemical composition, and structural stability of the WO3 thin films have been studied in detail. Characterization of freshly grown WO3 thin films has been performed using X-ray diffraction (XRD), atomic force microscopy (AFM), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy (RS), transmission electron microscopy (TEM), and selected area electron diffraction (SAED) measurements. The results indicate that the freshly grown WO3 thin films are nearly stoichiometric and well crystallized as monoclinic WO3. The surface morphology of the resulting WO3 thin film has grains of approximately 60 nm in size with a root-mean-square (rms) surface roughness of 10 nm. The phase transformations in the WO3 thin films were investigated by annealing in the TEM column at 30-500 degrees C. The phase transitions in the WO3 thin films occur in sequence as the temperature is increased: monoclinic --> orthorhombic --> hexagonal. Distortion and tilting of the WO6 octahedra occurs with the phase transitions and significantly affects the electronic properties and, hence, the electrochemical device applications of WO3.

Journal Article↗
PubMed2006

Effect of structure and thermodynamic stability on the response of lanthanide stannate pyrochlores to ion beam irradiation.

The lanthanide stannates, Ln2Sn2O7, Ln=La-Lu and Y, have the isometric pyrochlore structure, A2B2O7, and their structural properties have been refined by Rietveld analysis of powder neutron and synchrotron X-ray diffraction data. In this study, the enthalpies of formation of selected stannate pyrochlores, Ln=La, Nd, Sm, Eu, Dy, and Yb, were measured by high-temperature oxide melt solution calorimetry. Their radiation response was determined by 1 MeV Kr2+ ion irradiation combined with in situ TEM observation over the temperature range of 25 to 1000 K. The enthalpy of formation from binary oxides of stannate pyrochlores became more endothermic (from -145 to -40 kJ/mol) as the size of the lanthanide in the A-site decreases. A more exothermic trend of the enthalpy of formation was observed in stannate pyrochlores with larger lanthanide ions, particularly La, possibly as a result of increased covalency in the Sn-O bond. In contrast to lanthanide titanate pyrochlores, Ln2Ti2O7, that are generally susceptible to radiation-induced amorphization and zirconate pyrochlores, Ln2Zr2O7, that are generally resistant to radiation-induced amorphization, the lanthanide stannate pyrochlores show a much greater variation in their response to ion irradiation. La, Nd, and Gd stannates experience the radiation-induced transformation to the aperiodic state, and the critical amorphization temperatures are approximately 960, 700, and 350 K, respectively. Y and Er stannate pyrochlores cannot be amorphized by ion beam irradiation, even at 25 K, and instead disorder to a defect fluorite structure. Comparison of the calorimetric and ion irradiation data for titanate, zirconate, and stannate pyrochlores reveals a strong correlation among subtle changes in crystal structure with changing composition, the energetics of the disordering process, and the temperature above which the material can no longer be amorphized. In summary, as the structure approaches the ideal, ordered pyrochlore structure, radiation-induced amorphization is more easily attained. This is consistent with an increasingly exothermic trend in the enthalpies of formation of pyrochlores from the oxides, that is, the greater the thermochemical stability of the pyrochlore structure, the more likely it will be amorphized upon radiation damage rather than recover to a disordered fluorite structure.

Journal Article↗
PubMed2002

X-ray photoelectron spectroscopy study of disordering in Gd2(Ti1-xZrx)2O7 pyrochlores.

The dramatic increases in ionic conductivity in Gd2(Ti1-xZrx)2O7 solid solution are related to disordering on the cation and anion lattices. Disordering in Gd2(Ti1-xZrx)2O7 was characterized using x-ray photoelectron spectroscopy (XPS). As Zr substitutes for Ti in Gd2Ti2O7 to form Gd2(Ti1-xZrx)2O7 (0.25 < x < or =0.75), the corresponding O 1s XPS spectrum merges into a single symmetric peak. This confirms that the cation antisite disorder occurs simultaneously with anion disorder. Furthermore, the O 1s XPS spectrum of Gd2Zr2O7 experimentally suggests the formation of a split vacancy.

Journal Article↗
PubMed2001

Nanocrystalline zirconia can be amorphized by ion irradiation.

Nanocrystalline composites are finding applications in high-radiation environments due to their excellent mechanical and electronic properties. We show, however, that at the smallest particle sizes, radiation damage effects can be so strongly enhanced that under the right conditions, materials that have never been made amorphous can become highly susceptible to irradiation-induced amorphization. Because light-weight, high-strength nanocomposites are potential materials for spacecraft shielding and sensor systems, these fundamental results have significant implications for the design and selection of materials to be used in environments where a large ion flux will be encountered.

Journal Article↗
PubMed2001

Nanoscale manipulation of pyrochlore: new nanocomposite ionic conductors.

The ionic conductivity of isometric pyrochlore, ideally A2B2O (7), is extremely sensitive to disordering of A- and B-site cations and oxygen anion vacancies. We report the first use of ion beam irradiation-induced disordering in Gd 2Ti 2O (7) to produce a strain-free, buried, disordered defect-fluorite layer approximately 12 nm thick within an ordered pyrochlore matrix. This approach provides a new means of creating nanoscale, mixed ionic-electronic conductors in pyrochlore ceramics, such as those required for solid-state electrochemical cells.

Journal Article↗
PubMed1999

Nuclear waste forms for actinides.

The disposition of actinides, most recently 239Pu from dismantled nuclear weapons, requires effective containment of waste generated by the nuclear fuel cycle. Because actinides (e.g., 239Pu and 237Np) are long-lived, they have a major impact on risk assessments of geologic repositories. Thus, demonstrable, long-term chemical and mechanical durability are essential properties of waste forms for the immobilization of actinides. Mineralogic and geologic studies provide excellent candidate phases for immobilization and a unique database that cannot be duplicated by a purely materials science approach. The "mineralogic approach" is illustrated by a discussion of zircon as a phase for the immobilization of excess weapons plutonium.

Journal Article↗
PubMed1999

Performance assessments of nuclear waste repositories: a dialogue on their value and limitations.

Performance Assessment (PA) is the use of mathematical models to simulate the long-term behavior of engineered and geologic barriers in a nuclear waste repository; methods of uncertainty analysis are used to assess effects of parametric and conceptual uncertainties associated with the model system upon the uncertainty in outcomes of the simulation. PA is required by the U.S. Environmental Protection Agency as part of its certification process for geologic repositories for nuclear waste. This paper is a dialogue to explore the value and limitations of PA. Two "skeptics" acknowledge the utility of PA in organizing the scientific investigations that are necessary for confident siting and licensing of a repository; however, they maintain that the PA process, at least as it is currently implemented, is an essentially unscientific process with shortcomings that may provide results of limited use in evaluating actual effects on public health and safety. Conceptual uncertainties in a PA analysis can be so great that results can be confidently applied only over short time ranges, the antithesis of the purpose behind long-term, geologic disposal. Two "proponents" of PA agree that performance assessment is unscientific, but only in the sense that PA is an engineering analysis that uses existing scientific knowledge to support public policy decisions, rather than an investigation intended to increase fundamental knowledge of nature; PA has different goals and constraints than a typical scientific study. The "proponents" describe an ideal, six-step process for conducting generalized PA, here called probabilistic systems analysis (PSA); they note that virtually all scientific content of a PA is introduced during the model-building steps of a PSA; they contend that a PA based on simple but scientifically acceptable mathematical models can provide useful and objective input to regulatory decision makers. The value of the results of any PA must lie between these two views and will depend on the level of knowledge of the site, the degree to which models capture actual physical and chemical processes, the time over which extrapolations are made, and the proper evaluation of health risks attending implementation of the repository. The challenge is in evaluating whether the quality of the PA matches the needs of decision makers charged with protecting the health and safety of the public.

Geological Phenomena↗
PubMed1993

Inappropriate use of high-dose glyburide to treat uncontrolled type 2 diabetes mellitus.

OBJECTIVE: To report a case of chronic glyburide overdose. CASE SUMMARY: A patient with noninsulin-dependent diabetes mellitus (NIDDM) who had previously developed secondary failure while taking a maximal dosage of glipizide was switched to glyburide 5 mg/d. The patient initially experienced adequate glycemic control while taking glyburide, but subsequently experienced deterioration in glycemic control. This necessitated gradual increases in the dosage of glyburide until the maximum dosage of 20 mg/d was reached. Because the patient's diabetic control did not improve with this dosage of glyburide, she decided independently to increase the dosage further. She ingested an average daily dose of 37.7 mg of glyburide over the 18 days that preceded her clinic visit without experiencing any glyburide-related adverse effects. DISCUSSION: Progression of NIDDM may be responsible for the development of secondary sulfonylurea failure in NIDDM patients treated with oral sulfonylurea drugs. Consequently, these patients should be treated as patients dependent on insulin. CONCLUSIONS: NIDDM patients treated with oral sulfonylurea drugs require long-term blood glucose monitoring to detect the development of secondary sulfonylurea failure. Patients who experience secondary failure to a particular sulfonylurea drug do not appear to develop long-term blood glucose control when switched to a different oral sulfonylurea drug. These patients should be treated with insulin therapy.

Adult↗