PubMed Health⌕ Search

Biomedical subjects

R D Schmid

Publications and source records attributed to R D Schmid.

At least 37 records · Page 2Linked to original sources

Monitoring of phosphorus bioavailability in water by an immobilized luminescent cyanobacterial reporter strain.

Massive growth of cyanobacteria, known as "algal blooms", has become a major concern for water monitoring. It has been observed that environmental factors like temperature, light, and certain patterns of availability of nutrients such as P, N, Fe influence cyanobacterial proliferation and toxin production. In order to monitor nutrients in aquatic ecosystems, an assay for monitoring phosphorus bioavailability to cyanobacteria was developed. The test consists of an immobilized luminescent reporter strain of Synechococcus PCC 7942, designated APL. The reporter strain harbours the gene coding the reporter protein luciferase from Vibrio harveyi under control of the inducible alkaline phosphatase promoter from Synechococcus PCC 7942, and can be induced under phosphorus limitation. The resultant CyanoSensor detects PO(3-)(4)-P in a concentration range of 0.3-8 microM after a sample incubation time of 8 h under continuous illumination (50 microE m(-2) s(-1)). The sensor also responded to a variety of organic phosphorus sources and was storable for 3 weeks at 4 degrees C. It could be demonstrated that the CyanoSensor for bioavailability monitoring is an improvement to conventional phosphorus detection methods.

Biological Availability↗

A model of the pressure dependence of the enantioselectivity of Candida rugosalipase towards (+/-)-menthol.

Transesterification of (+/-)-menthol using propionic acid anhydride and Candida rugosa lipase was performed in chloroform and water at different pressures (1, 10, 50, and 100 bar) to study the pressure dependence of enantioselectivity E. As a result, E significantly decreased with increasing pressure from E = 55 (1 bar) to E = 47 (10 bar), E = 37 (50 bar), and E = 9 (100 bar). To rationalize the experimental findings, molecular dynamics simulations of Candida rugosa lipase were carried out. Analyzing the lipase geometry at 1, 10, 50, and 100 bar revealed a cavity in the Candida rugosa lipase. The cavity leads from a position on the surface distinct from the substrate binding site to the core towards the active site, and is limited by F415 and the catalytic H449. In the crystal structure of the Candida rugosa lipase, this cavity is filled with six water molecules. The number of water molecules in this cavity gradually increased with increasing pressure: six molecules in the simulation at 1 bar, 10 molecules at 10 bar, 12 molecules at 50 bar, and 13 molecules at 100 bar. Likewise, the volume of the cavity progressively increased from about 1864 A(3) in the simulation at 1 bar to 2529 A(3) at 10 bar, 2526 A(3) at 50 bar, and 2617 A(3) at 100 bar. At 100 bar, one water molecule slipped between F415 and H449, displacing the catalytic histidine side chain and thus opening the cavity to form a continuous water channel. The rotation of the side chain leads to a decreased distance between the H449-N epsilon and the (+)-menthyl-oxygen (nonpreferred enantiomer) in the acyl enzyme intermediate, a factor determining the enantioselectivity of the lipase. Although the geometry of the preferred enantiomer is similar in all simulations, the geometry of the nonpreferred enantiomer gets gradually more reactive. This observation correlates with the gradually decreasing enantioselectivity E.

Biotransformation↗

Engineering cytochrome P450 BM-3 for oxidation of polycyclic aromatic hydrocarbons.

Cytochrome P450 BM-3, a self-sufficient P450 enzyme from Bacillus megaterium that catalyzes the subterminal hydroxylation of long-chain fatty acids, has been engineered into a catalyst for the oxidation of polycyclic aromatic hydrocarbons. The activities of a triplet mutant (A74G/F87V/L188Q) towards naphthalene, fluorene, acenaphthene, acenaphthylene, and 9-methylanthracene were 160, 53, 109, 287, and 22/min, respectively. Compared with the activities of the wild type towards these polycyclic aromatic hydrocarbons, those of the mutant were improved by up to 4 orders of magnitude. The coupling efficiencies of the mutant towards naphthalene, fluorene, acenaphthene, acenaphthylene, and 9-methylanthracene were 11, 26, 5.4, 15, and 3.2%, respectively, which were also improved several to hundreds fold. The high activities of the mutant towards polycyclic aromatic hydrocarbons indicate the potential of engineering P450 BM-3 for the biodegradation of these compounds in the environment.

Bacillus megaterium↗

Acetylcholinesterase assay for rapid expression screening in liquid and solid media.

The synaptic enzyme acetylcholinesterase (AChE), which is the target of many insecticides and potential warfare agents, is implied in Alzheimer's disease and is a good potential candidate to be used in biosensors. This promotes a strong demand for production of recombinant AChE to be used in various studies. A promising expression system is the yeast Pichia pastoris, but the expression efficiency needs to be improved. Optimization studies require a rapid and efficient screening test to detect positive yeast colonies after transformation. Using indoxylacetate as a substrate, we designed a chromogenic test that is not interfered with by the culture media background color and, thus, is suitable for microplate screening. Moreover, it was possible to adapt the test for direct on-plate detection of AChE-expressing colonies.

Acetylcholinesterase↗

P450 in biotechnology: zinc driven omega-hydroxylation of p-nitrophenoxydodecanoic acid using P450 BM-3 F87A as a catalyst.

Cytochrome P450 enzymes require the delivery of two electrons to the heme protein for their enzymatic function. NADPH or NADH are usually used as reduction equivalents. In the absence of a substrate, NADPH may inactivate P450 enzymes. Furthermore, it is expensive, making it unsuitable for the preparative synthesis of fine chemicals. Approaches for replacing NADPH with an electrochemically generated reduction by using platinum-electrodes and different mediators are known. In the present study, NADPH was substituted by the mediator cobalt(III)sepulchrate and zinc dust that serves as an electron source. The mutated fatty acid hydroxylase P450 BM-3 F87A from Bacillus megaterium was chosen as a catalyst, since it shows a three-fold higher sensitivity and a nearly five-fold higher activity for p-nitrophenoxydodecanoic acid (12-pNCA) than the wild-type enzyme. The formation of p-nitrophenolate can easily be monitored using a photometer at 410 nm. The turnover rate of the zinc/cobalt(III)sepulchrate system reaches 20% of the NADPH activity. Compared to the electrochemical approaches the activity is at least 77% higher (turnover 125 eq min-1). The presented alternative cofactor system can be used instead of NADPH or expensive electrochemical devices (platinum electrodes) for fine chemical synthesis.

Bacillus megaterium↗

Designing new metal affinity peptides by random mutagenesis of a natural metal-binding site.

The metal-binding site of a Helicobacter pylori ATPase 439 (heli(WT)-tag) was successfully used as a new fusion peptide for immobilized metal ion affinity chromatography (IMAC). It produced higher yields than the frequently used his6-tag. Due to stronger binding of the peptide to metal ions, harsher elution conditions were, however, necessary. This undesired side-effect was overcome by modifying the heli(WT)-tag by polymerase chain reaction-directed mutagenesis. The modified tags were screened by an automated high-throughput IMAC system, leading to a heliM14-tag peptide that could be eluted under conditions similar to those of the his6-tag but at the same time produced 20% higher yields of the desired protein.

Adenosine Triphosphatases↗

Directed evolution of the fatty-acid hydroxylase P450 BM-3 into an indole-hydroxylating catalyst.

The self-sufficient cytochrome P450 BM-3 enzyme from Bacillus megaterium catalyzes subterminal hydroxylation of saturated long-chain fatty acids and structurally related compounds. Since the primary structure of P450 BM-3 is homologous to that of mammalian P450 type II, it represents an excellent model for this family of enzymes. During studies on the directed evolution of P450 BM-3 into a medium-chain fatty-acid hydroxylase, several mutants, in particular the triple mutant Phe87Val, Leu188Gln, Ala74Gly, were observed to hydroxylate indole, producing indigo and indirubin at a catalytic efficiency of 1365 M(-1)s(-1) (kcat=2.73 s(-1) and Km=2.0 mM). Both products were unequivocally characterized by NMR and MS analysis. Wild-type P450 BM-3 is incapable to hydroxylate indole. These results demonstrate that an enzyme can be engineered to catalyze the transformation of substrates with structures widely divergent from those of its native substrate.

Bacillus megaterium↗

Electrochemical reduction of flavocytochromes 2B4 and 1A2 and their catalytic activity.

The present study shows that cytochromes P450 2B4 and 1A2 with a covalently attached riboflavin (semisynthetic flavocytochromes RfP450 2B4 and RfP450 1A2) can be reduced electrochemically on rhodium-graphite electrodes at a potential of -500 mV (vs Ag/AgCl). In the presence of substrates such as aminopyrine, aniline, 7-ethoxyresorufin, and 7-pentoxyresorufin, N-demethylation, p-hydroxylation, and O-dealkylation reactions proceeded, as was confirmed by product analysis. Rates of electrocatalytically driven reactions are comparable to those obtained using NAD(P)H as the source of reducing equivalents. These results suggest the practicality of developing flavocytochrome P450s as catalysts for oxidation reactions with different classes of organic substrates.

Alkylation↗

Epoxide hydrolase activity of Streptomyces strains.

The discovery of epoxide hydrolases within a Streptomyces sp. strain collection is described. Screening was performed in 96 well microtiter plates using a modified 4-(p-nitrobenzyl)pyridine assay with styrene oxide, 1,2-epoxy-hexane or 3-phenyl ethylglycidate (3-PEG) as substrates. Out of 120 strains investigated, S. antibioticus Tü4, S. arenae Tü495 and S. fradiae Tü27 exhibited epoxide hydrolase activity. These strains were further investigated by performing laboratory-scale biotransformations utilizing styrene oxide, 1,2-epoxy-hexane and 3-PEG followed by subsequent quantitative analysis employing chiral gas chromatography. The highest conversions were achieved with whole cells from S. antibioticus Tü4 in the presence of 10% (v/v) DMSO. However, enantioselectivity was only satisfying (E = 31) in the presence of 5% (v/v) acetone, which allowed isolation of optically pure non-hydrolyzed (R)-styrene oxide (99% enantiomeric excess (ee)) and (S)-phenyl-1,2-ethandiol (72% ee) at 55% conversion after 24 h. The resolution of 3-PEG proceeded with slightly lower enantioselectivity albeit higher reaction rates. With S. fradiae Tü27 and S. arenae Tü495 enantioselectivity towards styrene oxide was only E = 3-4.

Epoxide Hydrolases↗

The His gap motif in microbial lipases: a determinant of stereoselectivity toward triacylglycerols and analogs.

Lipases preferably hydrolyze the sn-1 and sn-3 acyl chain of triacylglycerols and sn-2 substituted analogs. Molecular modeling studies of the stereopreference of microbial lipases from Rhizopus oryzae, Rhizomucor miehei, Candida rugosa, and lipase B from Candida antarctica toward the hydrolysis of triacylglycerols and analogs revealed that sterical interactions occurring between the sn-2 substituent and the His gap affect substrate geometry, which can be monitored by a single torsion angle. This torsion angle correlates to the experimentally determined stereopreference and is, therefore, suitable to predict stereopreference by molecular modeling. For a given microbial lipase, stereopreference can be estimated by measuring the distance between the side chains of the His gap residues: a narrow His gap cleft implies sn-3 stereopreference for all investigated substrates; a medium-sized His gap discriminates by flexibility of the substrates: flexible substrates are hydrolyzed in sn-1, while rigid substrates are hydrolyzed in sn-3. A wide open His gap implies sn-1 stereopreference for all substrates. This rule holds for all investigated microbial wild type lipases and mutants.

Amino Acid Motifs↗

Improved multianalyte detection of organophosphates and carbamates with disposable multielectrode biosensors using recombinant mutants of Drosophila acetylcholinesterase and artificial neural networks.

Engineered variants of Drosophila melanogaster acetylcholinesterase (AChE) were used as biological receptors of AChE-multisensors for the simultaneous detection and discrimination of binary mixtures of cholinesterase-inhibiting insecticides. The system was based on a combination of amperometric multielectrode biosensors with chemometric data analysis of sensor outputs using artificial neural networks (ANN). The multisensors were fully manufactured by screen-printing, including enzyme immobilisation. Two types of multisensors were produced that consisted of four AChE variants each. The AChE mutants were selected in order to obtain high resolution, enhanced sensitivity and minimal assay time. This task was successfully achieved using multisensor I equipped with wild-type Drosophila AChE and mutants Y408F, F368L, and F368H. Each of the AChE variants was selected on the basis of displaying an individual sensitivity pattern towards the target analytes. For multisensor II, the inclusion of F368W, which had an extremely diminished paraoxon sensitivity, increased the sensor's capacity even further. Multisensors I and II were both used for inhibition analysis of binary paraoxon and carbofuran mixtures in a concentration range 0-5 microg/l, followed by data analysis using feed-forward ANN. The two analytes were determined with prediction errors of 0.4 microg/l for paraoxon and 0.5 microg/l for carbofuran. A complete biosensor assay and subsequent ANN evaluation was completed within 40 min. In addition, multisensor II was also investigated for analyte discrimination in real water samples. Finally, the properties of the multisensors were confirmed by simultaneous detection of binary organophosphate mixtures. Malaoxon and paraoxon in composite solutions of 0-5 microg/l were discriminated with predication errors of 0.9 and 1.6 microg/l, respectively.

Acetylcholinesterase↗

Stereoselectivity of Pseudomonas cepacia lipase toward secondary alcohols: a quantitative model.

The lipase from Pseudomonas cepacia represents a widely applied catalyst for highly enantioselective resolution of chiral secondary alcohols. While its stereopreference is determined predominantly by the substrate structure, stereoselectivity depends on atomic details of interactions between substrate and lipase. Thirty secondary alcohols with published E values using P. cepacia lipase in hydrolysis or esterification reactions were selected, and models of their octanoic acid esters were docked to the open conformation of P. cepacia lipase. The two enantiomers of 27 substrates bound preferentially in either of two binding modes: the fast-reacting enantiomer in a productive mode and the slow-reacting enantiomer in a nonproductive mode. Nonproductive mode of fast-reacting enantiomers was prohibited by repulsive interactions. For the slow-reacting enantiomers in the productive binding mode, the substrate pushes the active site histidine away from its proper orientation, and the distance d(H(N epsilon) - O(alc)) between the histidine side chain and the alcohol oxygen increases, d(H(N epsilon) - O(alc)) was correlated to experimentally observed enantioselectivity: in substrates for which P. cepacia lipase has high enantioselectivity (E > 100), d(H(N epsilon) - O(alc)) is >2.2 A for slow-reacting enantiomers, thus preventing efficient catalysis of this enantiomer. In substrates of low enantioselectivity (E < 20), the distance d(H(N epsilon) - O(alc)) is less than 2.0 A, and slow- and fast-reacting enantiomers are catalyzed at similar rates. For substrates of medium enantioselectivity (20 < E < 100), d(H(N epsilon) - O(alc)) is around 2.1 A. This simple model can be applied to predict enantioselectivity of P. cepacia lipase toward a broad range of secondary alcohols.

Alcohols↗

Purification and reconstitution of an integral membrane protein, the photoreaction center of Rhodobacter sphaeroides, using synthetic sugar esters.

Detergents are indispensable reagents for the extraction and solubilization of integral membrane proteins, but their removal from a reconstituted phospholipid-protein complex is usually desirable. In this paper, we describe a novel method in which the synthetic sugar esters 6-O-octanoyl-beta-D-glucose (OG) or 6-O-octanoyl-beta-D-mannose (OM) are used as detergents for both the isolation and the rapid reconstitution of the photosynthetic reaction center protein of Rhodobacter sphaeroides. Following solubilization of the reaction center with OG or OM and reconstitution of this protein in liposomes, a convenient removal of these detergents was achieved within less than two hours by hydrolytic cleavage of the sugar esters using immobilized lipases. Best results were achieved with lipase from Bacillus sp. immobilized on silica gel.

Detergents↗

N-terminal truncated cytochrome P450 2B4: catalytic activities and reduction with alternative electron sources.

It was shown that riboflavin binds to the truncated cytochrome P450 2B4 and forms a complex with the K(d) = 26 microM. Noncovalent complex of truncated (Delta2-27) cytochrome P450 2B4 with riboflavin was essential for electron transfer realization and catalyzed the NADH-dependent and hydrogen peroxide-supported monooxygenase reactions of aminopyrine N-demethylation and aniline p-hydroxylation. Flavocytochrome molecular maquette was capable of supporting photoactivatable electron transfer and could be photoreduced and electroreduced quantitatively in the absence of pyridine nucleotides.

Aminopyrine↗

Highly selective synthesis of 1,3-oleoyl-2-palmitoylglycerol by lipase catalysis.

1,3-Oleoyl-2-palmitoylglycerol (OPO), an important structured triglyceride in infant nutrition, was synthesized by a two-step process in high yields and purity using sn1,3-regiospecific lipases. In the first step, tripalmitin (TP) was subjected to an alcoholysis reaction in an organic solvent catalyzed by sn1,3-regiospecific lipases yielding the corresponding 2-monopalmitin (2-MP). The 2-MP was isolated in up to 85% yield and >95% purity by crystallization and esterified in the second step with oleic acid using the same lipases to form the structured triglyceride OPO in up to 78% yield containing 96% palmitic acid in the sn2-position. Water activity, solvent, as well as carrier for lipase immobilization strongly influenced the yield and purity of products in both steps. The best results were achieved with lipases from Rhizomucor miehei and Rhizopus delemar immobilized on EP 100 and equilibrated to a water activity of 0.43. Special emphasis was given to develop this process in solvents that are allowed to be used in foodstuffs and to perform the second step in a solvent-free system.

Catalysis↗

P450 monooxygenase in biotechnology. I. Single-step, large-scale purification method for cytochrome P450 BM-3 by anion-exchange chromatography.

An efficient single-step purification protocol for recombinant cytochrome P450 BM-3 from Bacillus megaterium, expressed in E. coli, was developed. Functional crude protein was obtained by disintegrating induced E. coli DH5 alpha and removing cell debris by centrifugation. After investigating different anion-exchange matrices, elution salts and the elution procedures involving an AKTAexplorer system, adsorption of the crude extract from lysed E. coli to Toyopearl DEAE 650M anion exchanger, followed by a two-step elution using NaCl, proved sufficient to isolate almost pure protein without inactivation (up to 93% P450 BM-3 content) in yields that ranged between 79-86%. The purification method could be scaled up 1500-fold and higher without further optimization to a 6-1 production-scale column containing Toyopearl DEAE 650M anion exchanger.

Bacillus megaterium↗

A continuous spectrophotometric assay for P450 BM-3, a fatty acid hydroxylating enzyme, and its mutant F87A.

Cytochrome P450 BM-3 from Bacillus megaterium catalyzes the subterminal hydroxylation of medium- and long-chain fatty acids at the positions omega-1, omega-2, and omega-3. A rapid and continuous spectrophotometric activity assay for cytochrome P450 BM-3 based on the conversion of p-nitrophenoxycarboxylic acids (pNCA) to omega-oxycarboxylic acids and the chromophore p-nitrophenolate was developed. In contrast to the commonly used activity assays for this enzyme, relying on the consumption of oxygen or NADPH or the use of 14C-labeled carboxylic acids, the pNCA assay can even be used with crude extracts of the recombinant enzyme from lysed Escherichia coli cells. The kinetics of p-nitrophenolate formation are directly measured at a wavelength of 410 nm using a spectrophotometer or microtiter plate reader. Sensitivity of the assay is greatly enhanced if p-nitrophenoxydodecanoic or p-nitrophenoxypentadecanoic acid are used with the F87A mutant instead of the wild-type P450 BM-3 enzyme.

Bacillus megaterium↗

Disposable sensor for measuring the biochemical oxygen demand for nitrification and inhibition of nitrification in wastewater.

A disposable-type microbial sensor was developed for the determination of both the biochemical oxygen demand for nitrification (N-BOD) and inhibiting effects on nitrifying bacteria. The sensor was based on the respiratory activity of nitrifying bacteria immobilized on a miniature oxygen electrode. Typical response times for measuring N-BOD of ammonium standard solutions as well as of wastewater samples were in the range of 6-12 min. A dynamic evaluation of the signals after a measuring time of 120 s also resulted in good reproducibility and sensitivity. A daily profile of a municipal sewage plant was recorded, comparing the biosensor data with two standard methods. For the measurement of nitrification-inhibiting effects a 120-s dynamic signal evaluation was preferred to a steady-state method because of the long recovery times resulting from extended exposure to inhibitors. However, steady-state measurement techniques allowed allylthiourea detection with a ten times higher sensitivity. Because of the advantages of this miniaturized electrode, e.g. short response time, simple measuring procedure and low costs of production, this sensor system is considered to be suitable for commercial application in environmental analysis.

Bacteria↗