PubMed Health⌕ Search

Biomedical subjects

R E Dalbey

Publications and source records attributed to R E Dalbey.

At least 19 recordsLinked to original sources

Effect of nonbilayer lipids on membrane binding and insertion of the catalytic domain of leader peptidase.

Biological membranes contain a substantial amount of "nonbilayer lipids", which have a tendency to form nonlamellar phases. In this study the hypothesis was tested that the presence of nonbilayer lipids in a membrane, due to their overall small headgroup, results in a lower packing density in the headgroup region, which might facilitate the interfacial insertion of proteins. Using the catalytic domain of leader peptidase (delta2-75) from Escherichia coli as a model protein, we studied the lipid class dependence of its insertion and binding. In both lipid monolayers and vesicles, the membrane binding of (catalytically active) delta2-75 was much higher for the nonbilayer lipid DOPE compared to the bilayer lipid DOPC. For the nonbilayer lipids DOG and MGDG a similar effect was observed as for DOPE, strongly suggesting that no specific interactions are involved but that the small headgroups create hydrophobic interfacial insertion sites. On the basis of the results of the monolayer experiments, calculations were performed to estimate the space between the lipid headgroups accessible to the protein. We estimate a maximal size of the insertion sites of 15 +/- 7 A2/lipid molecule for DOPE, relative to DOPC. The size of the insertion sites decreases with an increase in headgroup size. These results show that nonbilayer lipids stimulate the membrane insertion of delta2-75 and support the idea that such lipids create insertion sites by reducing the packing density at the membrane-water interface. It is suggested that PE in the bacterial membrane facilitates membrane insertion of the catalytic domain of leader peptidase, allowing the protein to reach the cleavage site in preproteins.

Catalytic Domain↗

YidC, an assembly site for polytopic Escherichia coli membrane proteins located in immediate proximity to the SecYE translocon and lipids.

Like its mitochondrial homolog Oxa1p, the inner membrane protein YidC of Escherichia coli is involved in the integration of membrane proteins. We have analyzed individual insertion steps of the polytopic E. coli membrane protein MtlA targeted as ribosome-nascent chain complexes to inner membrane vesicles. YidC can accommodate at least the first two transmembrane segments of MtlA at the protein lipid interface and retain them even though the length of the nascent chain would amply allow insertion into membrane lipids. An even longer insertion intermediate of MtlA is described that still has the first transmembrane helix bound to YidC while the third contacts SecE and YidC during integration. Our findings suggest that YidC forms a contiguous integration unit with the SecYE translocon and functions as an assembly site for polytopic membrane proteins mediating the formation of helix bundles prior to their release into the membrane lipids.

Bacterial Proteins↗

Function of YidC for the insertion of M13 procoat protein in Escherichia coli: translocation of mutants that show differences in their membrane potential dependence and Sec requirement.

The membrane insertion of the Sec-independent M13 Procoat protein in bacteria requires the membrane electrochemical potential and the integral membrane protein YidC. We show here that YidC is involved in the translocation but not in the targeting of the Procoat protein, because we found the protein was partitioned into the membrane in the absence of YidC. YidC can function also to promote membrane insertion of Procoat mutants that insert independently of the membrane potential, proving that the effect of YidC depletion is not due to a dissipation of the membrane potential. We also found that YidC is absolutely required for Sec-dependent translocation of a long periplasmic loop of a mutant Procoat in which the periplasmic region has been extended from 20 to 194 residues. Furthermore, when Sec-dependent membrane proteins with large periplasmic domains were overproduced under YidC-limited conditions, we found that the exported proteins pro-OmpA and pre-peptidoglycan-associated lipoprotein accumulated in the cytoplasm. This suggests for Sec-dependent proteins that YidC functions at a late stage in membrane insertion, after the Sec translocase interacts with the translocating membrane protein. These studies are consistent with the understanding that YidC cooperates with the Sec translocase for membrane translocation and that YidC is required for clearing the protein-conducting channel.

Adenosine Triphosphatases↗

Sec-dependent membrane protein insertion: sequential interaction of nascent FtsQ with SecY and YidC.

Recent studies identified YidC as a novel membrane factor that may play a key role in membrane insertion of inner membrane proteins (IMPs), both in conjunction with the Sec-translocase and as a separate entity. Here, we show that the type II IMP FtsQ requires both the translocase and, to a lesser extent, YidC in vivo. Using photo-crosslinking we demonstrate that the transmembrane (TM) domain of the nascent IMP FtsQ inserts into the membrane close to SecY and lipids, and moves to a combined YidC/lipid environment upon elongation. These data are consistent with a crucial role for YidC in the lateral transfer of TM domains from the Sec translocase into the lipid bilayer.

Adenosine Triphosphatases↗

The role of the membrane-spanning domain of type I signal peptidases in substrate cleavage site selection.

Type I signal peptidase (SPase I) catalyzes the cleavage of the amino-terminal signal sequences from preproteins destined for cell export. Preproteins contain a signal sequence with a positively charged n-region, a hydrophobic h-region, and a neutral but polar c-region. Despite having no distinct consensus sequence other than a commonly found c-region "Ala-X-Ala" motif preceding the cleavage site, signal sequences are recognized by SPase I with high fidelity. Remarkably, other potential Ala-X-Ala sites are not cleaved within the preprotein. One hypothesis is that the source of this fidelity is due to the anchoring of both the SPase I enzyme (by way of its transmembrane segment) and the preprotein substrate (by the h-region in the signal sequence) in the membrane. This limits the enzyme-substrate interactions such that cleavage occurs at only one site. In this work we have, for the first time, successfully isolated Bacillus subtilis type I signal peptidase (SipS) and a truncated version lacking the transmembrane domain (SipS-P2). With purified full-length as well as truncated constructs of both B. subtilis and Escherichia coli (Lep) SPase I, in vitro specificity studies indicate that the transmembrane domains of either enzyme are not important determinants of in vitro cleavage fidelity, since enzyme constructs lacking them reveal no alternate site processing of pro-OmpA nuclease A substrate. In addition, experiments with mutant pro-OmpA nuclease A substrate constructs indicate that the h-region of the signal peptide is also not critical for substrate specificity. In contrast, certain mutants in the c-region of the signal peptide result in alternate site cleavage by both Lep and SipS enzymes.

ATP-Binding Cassette Transporters↗

YidC mediates membrane protein insertion in bacteria.

The basic machinery for the translocation of proteins into or across membranes is remarkably conserved from Escherichia coli to humans. In eukaryotes, proteins are inserted into the endoplasmic reticulum using the signal recognition particle (SRP) and the SRP receptor, as well as the integral membrane Sec61 trimeric complex (composed of alpha, beta and gamma subunits). In bacteria, most proteins are inserted by a related pathway that includes the SRP homologue Ffh, the SRP receptor FtsY, and the SecYEG trimeric complex, where Y and E are related to the Sec61 alpha and gamma subunits, respectively. Proteins in bacteria that exhibit no dependence on the Sec translocase were previously thought to insert into the membrane directly without the aid of a protein machinery. Here we show that membrane insertion of two Sec-independent proteins requires YidC. YidC is essential for E. coli viability and homologues are present in mitochondria and chloroplasts. Depletion of YidC also interferes with insertion of Sec-dependent membrane proteins, but it has only a minor effect on the export of secretory proteins. These results provide evidence for an additional component of the translocation machinery that is specialized for the integration of membrane proteins.

ATP-Binding Cassette Transporters↗

Mutational evidence of transition state stabilization by serine 88 in Escherichia coli type I signal peptidase.

Type I signal peptidase (SPase I) catalyzes the hydrolytic cleavage of the N-terminal signal peptide from translocated preproteins. SPase I belongs to a novel class of Ser proteases that utilize a Ser/Lys dyad catalytic mechanism instead of the classical Ser/His/Asp triad found in most Ser proteases. Recent X-ray crystallographic studies indicate that the backbone amide nitrogen of the catalytic Ser 90 and the hydroxyl side chain of Ser 88 might participate as H-bond donors in the transition-state oxyanion hole. In this work, contribution of the side-chain Ser 88 in Escherichia coli SPase I to the stabilization of the transition state was investigated through in vivo and in vitro characterizations of Ala-, Cys-, and Thr-substituted mutants. The S88T mutant maintains near-wild-type activity with the substrate pro-OmpA nuclease A. In contrast, substitution with Cys at position 88 results in more than a 740-fold reduction in activity (k(cat)) whereas S88A retains much less activity (>2440-fold decrease). Measurements of the kinetic constants of the individual mutant enzymes indicate that these decreases in activity are attributed mainly to decreases in k(cat) while effects on K(m) are minimal. Thermal inactivation and CD spectroscopic analyses indicate no global conformational perturbations of the Ser 88 mutants relative to the wild-type E. coli SPase I enzyme. These results provide strong evidence for the stabilization by Ser 88 of the oxyanion intermediate during catalysis by E. coli SPase I.

Bacterial Outer Membrane Proteins↗

The role of the conserved box E residues in the active site of the Escherichia coli type I signal peptidase.

Type I signal peptidases are integral membrane proteins that function to remove signal peptides from secreted and membrane proteins. These enzymes carry out catalysis using a serine/lysine dyad instead of the prototypical serine/histidine/aspartic acid triad found in most serine proteases. Site-directed scanning mutagenesis was used to obtain a qualitative assessment of which residues in the fifth conserved region, Box E, of the Escherichia coli signal peptidase I are critical for maintaining a functional enzyme. First, we find that there is no requirement for activity for a salt bridge between the invariant Asp-273 and the Arg-146 residues. In addition, we show that the conserved Ser-278 is required for optimal activity as well as conserved salt bridge partners Asp-280 and Arg-282. Finally, Gly-272 is essential for signal peptidase I activity, consistent with it being located within van der Waals proximity to Ser-278 and general base Lys-145 side-chain atoms. We propose that replacement of the hydrogen side chain of Gly-272 with a methyl group results in steric crowding, perturbation of the active site conformation, and specifically, disruption of the Ser-90/Lys-145 hydrogen bond. A refined model is proposed for the catalytic dyad mechanism of signal peptidase I in which the general base Lys-145 is positioned by Ser-278, which in turn is held in place by Asp-280.

Bacterial Outer Membrane Proteins↗

The structure and mechanism of bacterial type I signal peptidases. A novel antibiotic target.

Type I signal peptidases are essential membrane-bound serine proteases that function to cleave the amino-terminal signal peptide extension from proteins that are translocated across biological membranes. The bacterial signal peptidases are unique serine proteases that utilize a Ser/Lys catalytic dyad mechanism in place of the classical Ser/His/Asp catalytic triad mechanism. They represent a potential novel antibiotic target at the bacterial membrane surface. This review will discuss the bacterial signal peptidases that have been characterized to date, as well as putative signal peptidase sequences that have been recognized via bacterial genome sequencing. We review the investigations into the mechanism of Escherichia coli and Bacillus subtilis signal peptidase, and discuss the results in light of the recent crystal structure of the E. coli signal peptidase in complex with a beta-lactam-type inhibitor. The proposed conserved structural features of Type I signal peptidases give additional insight into the mechanism of this unique enzyme.

Amino Acid Sequence↗

Understanding the insertion of transporters and other membrane proteins.

Recent studies show that transporters integrate into the lipid bilayer using topogenic sequences present throughout the entire polypeptide chain. These topogenic sequences can act in unpredictable ways with new translocation/stop transfer activities. In addition, a new membrane-insertion pathway has been identified in bacteria with homologs in mitochondria and chloroplasts.

Biological Transport↗

Evolutionarily related insertion pathways of bacterial, mitochondrial, and thylakoid membrane proteins.

The inner membranes of eubacteria and mitochondria, as well as the chloroplast thylakoid membrane, contain essential proteins that function in oxidative phosphorylation and electron transport processes or in photosynthesis. Because most of the organellar proteins are nuclear encoded, they are synthesized in the cytoplasm and subsequently imported into the organelle before they are inserted into the membrane. This review focuses on the pathways of protein insertion into the inner membrane of eubacteria and mitochondria and into the chloroplast thylakoid membrane. In many respects, insertion of proteins into the inner membrane of bacteria is a process similar to that used by proteins of the thylakoid membrane. In both of these systems a signal recognition particle (SRP) and a SecYE-translocase are involved, as in translocation into the endoplasmic reticulum. The pathway of proteins into the mitochondrial membranes appears to be different in that it involves no SecYE-like components. A conservative pathway, recently identified in mitochondria, involves the Oxa1 protein for the insertion of proteins from the matrix. The presence of Oxa1 homologues in eubacteria and chloroplasts suggests that this pathway is evolutionarily conserved.

Bacterial Proteins↗

Direct evidence that the proton motive force inhibits membrane translocation of positively charged residues within membrane proteins.

The M13 phage procoat protein requires both its signal sequence and its membrane anchor sequence in the mature part of the protein for membrane insertion. Translocation of its short acidic periplasmic loop is stimulated by the proton motive force (pmf) and does not require the Sec components. We now find that the pmf becomes increasingly important for the translocation of negatively charged residues within procoat when the hydrophobicity of the signal or membrane anchor is incrementally reduced. In contrast, we find that the pmf inhibits translocation of the periplasmic loop when it contains one or two positively charged residues. This inhibitory effect of the pmf is stronger when the hydrophobicity of the inserting procoat protein is compromised. No pmf effect is observed for translocation of an uncharged periplasmic loop even when the hydrophobicity is reduced. We also show that the Delta Psi component of the pmf is necessary and sufficient for insertion of representative constructs and that the translocation effects of charged residues are primarily due to the DeltaPsi component of the pmf and not the pH component.

Amino Acid Sequence↗

Protein translocation into and across the bacterial plasma membrane and the plant thylakoid membrane.

Over the past decade, some familiar themes have emerged on how proteins are inserted into or translocated across the plant chloroplast thylakoid membrane and bacterial inner membranes. In the SecA and signal recognition particle (SRP) pathways, nucleotides and soluble factors are used to translocate proteins across the membrane bilayer in the unfolded state. However, the delta pH-dependent pathway in thylakoids uses a radically different mechanism: transport of proteins across the membrane is driven by the transmembrane pH gradient, and neither stromal factors nor nucleotide triphosphates are needed. In addition, this pathway, which requires the membrane-bound protein Hcf106, appears to translocate proteins in a tightly folded form. Recently, a similar pathway has been shown to operate in eubacteria, and several of its components have been identified.

Bacterial Proteins↗

Crystal structure of a bacterial signal peptidase in complex with a beta-lactam inhibitor.

The signal peptidase (SPase) from Escherichia coli is a membrane-bound endopeptidase with two amino-terminal transmembrane segments and a carboxy-terminal catalytic region which resides in the periplasmic space. SPase functions to release proteins that have been translocated into the inner membrane from the cell interior, by cleaving off their signal peptides. We report here the X-ray crystal structure of a catalytically active soluble fragment of E. coli SPase (SPase delta2-75). We have determined this structure at 1.9 A resolution in a complex with an inhibitor, a beta-lactam (5S,6S penem), which is covalently bound as an acyl-enzyme intermediate to the gamma-oxygen of a serine residue at position 90, demonstrating that this residue acts as the nucleophile in the hydrolytic mechanism of signal-peptide cleavage. The structure is consistent with the use by SPase of Lys 145 as a general base in the activation of the nucleophilic Ser90, explains the specificity requirement at the signal-peptide cleavage site, and reveals a large exposed hydrophobic surface which could be a site for an intimate association with the membrane. As enzymes that are essential for cell viability, bacterial SPases present a feasible antibacterial target: our determination of the SPase structure therefore provides a template for the rational design of antibiotic compounds.

Bacterial Proteins↗

Phosphatidylethanolamine mediates insertion of the catalytic domain of leader peptidase in membranes.

Leader peptidase is an integral membrane protein of E. coli and it catalyses the removal of most signal peptides from translocated precursor proteins. In this study it is shown that when the transmembrane anchors are removed in vivo, the remaining catalytic domain can bind to inner and outer membranes of E. coli. Furthermore, the purified catalytic domain binds to inner membrane vesicles and vesicles composed of purified inner membrane lipids with comparable efficiency. It is shown that the interaction is caused by penetration of a part of the catalytic domain between the lipids. Penetration is mediated by phosphatidylethanolamine, the most abundant lipid in E. coli, and does not seem to depend on electrostatic interactions. A hydrophobic segment around the catalytically important residue serine 90 is required for the interaction with membranes.

Amino Acid Sequence↗

The proton motive force, acting on acidic residues, promotes translocation of amino-terminal domains of membrane proteins when the hydrophobicity of the translocation signal is low.

We have shown previously that the first transmembrane segment of leader peptidase can function to translocate the polar amino-terminal Pf3 domain across the membrane into the periplasm independently of the proton motive force (pmf) (Lee, J. I., Kuhn, A., and Dalbey, R. E. (1992) J. Biol. Chem. 267, 938-943). We now show that when the first transmembrane segment lacks a strong hydrophobic character, the pmf is required for translocation. In addition, we find that the amino-terminal acidic residue proximal to the transmembrane domain plays a critical role in pmf-dependent amino-terminal translocation. Moreover, the pmf is required to hold the amino-terminal domain in the periplasm to prevent it from slipping such that the amino terminus is no longer exposed to the periplasm. In all cases, translocation occurs under conditions in which the function of the Sec machinery is impaired. These studies show that the low hydrophobicity of the first apolar domain (the translocation signal) can be compensated for by a negative charge in the amino-terminal region, upon which the pmf acts.

Amino Acid Sequence↗

Use of site-directed chemical modification to study an essential lysine in Escherichia coli leader peptidase.

Escherichia coli leader peptidase, which catalyzes the cleavage of signal peptides from pre-proteins, is an essential, integral membrane serine peptidase that has its active site residing in the periplasmic space. It contains a conserved lysine residue that has been proposed to act as the general base, abstracting the proton from the side chain hydroxyl group of the nucleophilic serine 90. To help elucidate the role of the essential lysine 145 in the activity of E. coli leader peptidase, we have combined site-directed mutagenesis and chemical modification methods to introduce unnatural amino acid side chains at the 145-position. We show that partial activity can be restored to an inactive K145C leader peptidase mutant by reacting it with 2-bromoethylamine.HBr to produce a lysine analog (gamma-thia-lysine) at the 145-position. Modification with the reagents 3-bromopropylamine.HBr and 2-mercaptoethylamine also allowed for partial restoration of activity showing that there is some flexibility in the length requirements of this essential residue. Modification with (2-bromoethyl)trimethylammonium.Br to form a positively charged, nontitratable side chain at the 145-position failed to restore activity to the inactive K145C leader peptidase mutant. This result, along with an inactive K145R mutant result, supports the claim that the lysine side chain at the 145-position is essential due to its ability to form a hydrogen bond(s) or to act as a general base rather than because of an ability to form a critical salt bridge. We find that leader peptidase processes the pre-protein substrate, pro-OmpA nuclease A, with maximum efficiency at pH 9.0, and apparent pKa values for titratable groups at approximately 8.7 and 9.3 are revealed. We show that the lysine modifier maleic anhydride inhibits leader peptidase by reacting with lysine 145. The results of this study are consistent with the hypothesis that the lysine at the 145-position of leader peptidase functions as the active site general base. A model of the active site region of leader peptidase is presented based on the structure of the E. coli UmuD', and a mechanism for bacterial leader peptidase is proposed.

Amino Acid Sequence↗

The chemistry and enzymology of the type I signal peptidases.

The discovery that proteins exported from the cytoplasm are typically synthesized as larger precursors with cleavable signal peptides has focused interest on the peptidases that remove the signal peptides. Here, we review the membrane-bound peptidases dedicated to the processing of protein precursors that are found in the plasma membrane of prokaryotes and the endoplasmic reticulum, the mitochondrial inner membrane, and the chloroplast thylakoidal membrane of eukaryotes. These peptidases are termed type I signal (or leader) peptidases. They share the unusual feature of being resistant to the general inhibitors of the four well-characterized peptidase classes. The eukaryotic and prokaryotic signal peptidases appear to belong to a single peptidase family. This review emphasizes the evolutionary concepts, current knowledge of the catalytic mechanism, and substrate specificity requirements of the signal peptidases.

Bacterial Proteins↗