Biomedical subjects

R G F Visser

Publications and source records attributed to R G F Visser.

7 recordsLinked to original sources

PubMed2006

Isolation and characterization of a novel potato Auxin/Indole-3-Acetic Acid family member (StIAA2) that is involved in petiole hyponasty and shoot morphogenesis.

Auxin/indole-3-acetid acid (Aux/IAA) proteins are short-lived transcriptional regulators that mediate their response through interaction with auxin response factors (ARF). Although 29 Aux/IAA proteins have been identified in Arabidopsis thaliana, their individual functions are still poorly understood and are largely defined by observed growth defects in gain-of-function mutant alleles. Here we present the isolation and characterization of a novel Aux/IAA protein in potato (Solanum tuberosum) that is named StIAA2. Down regulation of StIAA2 results in distinctive phenotypes that include, increased plant height, petiole hyponasty and extreme curvature of growing leaf primordia in the shoot apex. Gene expression analysis of transgenic plants with reduced StIAA2 transcript levels resulted in the identification of a number of genes with altered expression profiles including another member of the Aux/IAA gene family (StIAA). The phenotypes that were observed in the StIAA2 suppression clones can be associated with both common as well as unique functional roles among Aux/IAA family members indicating the importance of analyzing Aux/IAA expression in different plant species.

Alleles↗

PubMed2006

QTL methodology for response curves on the basis of non-linear mixed models, with an illustration to senescence in potato.

The improvement of quantitative traits in plant breeding will in general benefit from a better understanding of the genetic basis underlying their development. In this paper, a QTL mapping strategy is presented for modelling the development of phenotypic traits over time. Traditionally, crop growth models are used to study development. We propose an integration of crop growth models and QTL models within the framework of non-linear mixed models. We illustrate our approach with a QTL model for leaf senescence in a diploid potato cross. Assuming a logistic progression of senescence in time, two curve parameters are modelled, slope and inflection point, as a function of QTLs. The final QTL model for our example data contained four QTLs, of which two affected the position of the inflection point, one the senescence progression-rate, and a final one both inflection point and rate.

Nonlinear Dynamics↗

PubMed2006

Post-transcriptional gene silencing of GBSSI in potato: effects of size and sequence of the inverted repeats.

In the past, silencing of granule-bound starch synthase (GBSSI) in potato was achieved by antisense technology, where it was observed that inclusion of the 3' end of the GBSSI coding region increased silencing efficiency. Since higher silencing efficiencies were desired, GBSSI inverted repeat constructs were designed and tested in potato. First, large inverted repeats comprising the 5' and the 3' half of the GBSSI cDNA were tested. The 5' IR construct gave a significantly higher silencing efficiency than the 3' IR construct. Since it was not known whether the observed difference was due to the sequence or the orientation of the inverted repeat, the GBSSI cDNA was divided into three regions, after which each region was tested in small inverted repeats in two orientations. To this end large numbers of independent transformants were produced for each construct. The results suggested that there was no effect of inverted repeat orientation on silencing efficiency. The percentage of transformants showing strong inhibition varied from 48% for a 3'-derived construct to 87% for a 5' as well as a middle region-derived construct. Similar to the large inverted repeats, the 3' sequences induced the least efficient silencing implying that the observed differences in silencing efficiency are caused by sequence differences. The small inverted repeat constructs with a repeat size of 500-600 bp and a spacer of about 150 bp were more efficient silencing inducers than the large inverted repeat constructs where the size of the repeat was 1.1 or 1.3 kb whilst the size of spacer was 1.3 or 1.1 kb. The results presented here show that size and sequence of the inverted repeat influenced silencing efficiency.

Blotting, Northern↗

PubMed2005

PRECISE: software for prediction of cis-acting regulatory elements.

The regulation of gene expression at the transcription initiation level is highly complex and requires the presence of multiple transcription factors. These transcription factors are often proteins or peptides that bind to the so-called cis-acting elements, which are present in the promoter regions and conserved among different species. In order to predict these cis-acting elements, a computer program called PRECISE (Prediction of REgulatory CIS-acting Elements) was developed. The power of the tool lies in its user-friendly interface and in the possibility of using empirical motif frequency tables to filter through the many discovered motifs. The tools to create the empirical motif frequency table (e.g., from a whole genome sequence) are included in the package. In the first case study, the upstream regions of all the genes in the Arabidopsis genome were used to create an empirical motif frequency table and a set of 64 upstream sequences of genes known to be involved in starch metabolism was subjected to analysis by PRECISE. The 20 motifs with the highest specificity in the selected set were analyzed in more detail. Of these 20 motifs, 15 showed a very high or complete homology to the sequences of known cis-acting elements. These cis-acting elements are regulated by light, auxin, and abscisic acid, and confer specific expression in sink organs such as leaves and seeds. All these factors have been shown to play an important role in starch biosynthesis. In the second case study, the upstream regions of 16 genes whose transcription is induced by gibberellins (GA) in Arabidopsis were analyzed with PRECISE and compared to the motifs present in the PLACE database. Among the most promising motifs found by PRECISE were 6 of the 17 known GA motifs. These results indicate the power of the PRECISE software package in the prediction of regulatory elements.

Algorithms↗

PubMed2005

Characterization and high-resolution mapping of a late blight resistance locus similar to R2 in potato.

Identification of resistance (R) genes to Phytophthora infestans is an essential step in molecular breeding of potato. We identified three specific R genes segregating in a diploid mapping population. One of the R genes is located on chromosome 4 and proved phenotypically indistinguishable from the Solanum demissum-derived R2, although S. demissum is not directly involved in the pedigree of the population. By bulked segregant analysis combined with a resistance assay, a genetic linkage map of the R2-like locus was constructed with 30 coupling and 23 repulsion phase AFLP markers. Two markers flanking the R2-like locus were applied to screen an extended population of 1,586 offspring. About 103 recombinants were selected, and an accurate high-resolution map was constructed. The R2-like resistance was localized in a 0.4 cM interval and was found co-segregating with four AFLP markers, which can be used to isolate the R2-like gene by map-based gene cloning. By analyzing race-specificity and R gene-specific molecular markers, we also found that an R1-like gene and an additional unknown R gene are segregating in the population.

Chromosome Mapping↗

PubMed2005

Intergenomic recombination in F1 lily hybrids (Lilium) and its significance for genetic variation in the BC1 progenies as revealed by GISH and FISH.

Intergenomic recombination was assessed in a BC1 population of Oriental (O)xAsiatic (A) lilies (Lilium) backcrossed to Asiatic parents. This population consisted of 38 plants generated from the 2n gametes from 2 genotypes (951502-1 and 952400-1) of the diploid F1, Orientalx Asiatic lilies (2n=2x=24) as parents. In the majority of BC1 plants, there was evidence that first division restitution, with and without crossovers, resulted in functional gametes. However, there were 5 BC1 plants in which 2n gametes originated from indeterminate meiotic restitution (IMR). Based on the number of recombinant chromosomes for a particular homoeologous pair, 3 types of plants were identified: (i) those with both the reciprocal product of a crossover (O/A, A/O, where O represents the centromere of the O genome and A the recombinant segment of Asiatic chromosome, and vice versa); (ii) those with 1 normal chromosome of the O genome and a recombinant chromosome (O, A/O); and (iii) those with 1 normal chromosome of the A genome and a recombinant chromosome (A, O/A). An important feature of A x OA backcross progeny is the occurrence of substitutions for the segment distal in the crossover wherever the recombinant chromosome O/A was present. In the case of IMR, the substitution occurred for both proximal and distal recombinant segments. The significance of these substitutions is that they offer the potential for the phenotypic expression of recessive genes in polyploids (i.e., nulliplex genotype).

Centromere↗

PubMed2002

Molecular characterization and physical localization of highly repetitive DNA sequences from Brazilian Alstroemeria species.

Highly repetitive DNA sequences were isolated from genomic DNA libraries of Alstroemeria psittacina and A. inodora. Among the repetitive sequences that were isolated, tandem repeats as well as dispersed repeats could be discerned. The tandem repeats belonged to a family of interlinked Sau3A subfragments with sizes varying from 68-127 bp, and constituted a larger HinfI repeat of approximately 400 bp. Southern hybridization showed a similar molecular organization of the tandem repeats in each of the Brazilian Alstroemeria species tested. None of the repeats hybridized with DNA from Chilean Alstroemeria species, which indicates that they are specific for the Brazilian species. In-situ localization studies revealed the tandem repeats to be localized in clusters on the chromosomes of A. inodora and A. psittacina: distal hybridization sites were found on chromosome arms 2PS, 6PL, 7PS, 7PL and 8PL, interstitial sites on chromosome arms 2PL, 3PL, 4PL and 5PL. The applicability of the tandem repeats for cytogenetic analysis of interspecific hybrids and their role in heterochromatin organization are discussed.

Base Sequence↗