Biomedical subjects
Publications and source records attributed to R H Müller.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
A photometric assay was developed to study the surface erosion of polymeric nanoparticles. The hydrolytic degradation of polyalkylcyanoacrylate particles was studied in different environments (NaOH, buffer, cell culture medium and serum). The influence of particle modification on the degradation rate was assessed. Particularly, the effect of polymer coating for particle targeting and fluorescence labelling was investigated. From the absorption data, a t50% and t100% can be calculated for fast degrading particles and obtained by an extrapolation in case of a slow degradation process. The degradation rate was found to decrease with increasing alkyl chain length from methyl-, ethyl-, isobutyl- to isohexylcyanoacrylate particles. Polymer coating and fluorescent labelling had little effect on the rate of degradation.
Colloidal carriers injected intravenously are normally removed rapidly and efficiently by the liver and this represents a major barrier to drug targeting. By coating model microspheres and emulsions with a block co-polymer (poloxamine) it has been possible to keep the carrier circulating in the vascular compartment with little or no uptake by the reticuloendothelial system.
The effect of surface characteristics on the interaction of sterically stabilized polystyrene particles with mouse peritoneal macrophages was studied using a range of poloxamers and poloxamine as coating agents. The coated particles were characterized in terms of thickness of coating layer, surface charge and critical flocculation temperature. The relative phagocytic uptake was found to decrease with increasing adsorbed layer thickness i.e. longer hydrophilic polymer chains of the coating agent and consequently a greater steric stabilization effect.
After growth on acetate three groups of Acinetobacter strains could be identified with respect to the excretion of a bioemulsifier. Mutants of A. calcoaceticus 69-V were selected which produced reduced amounts of emulsifier.
The particle size in microemulsions and other highly dispersed systems was determined by means of photon correlation spectroscopy (PCS). As PCS cannot be applied to highly concentrated dispersed phases, the measurement accuracy was tested for its dependence on the particle concentration using latex suspensions. The data obtained by clipping and scaling were compared. The particle size determination was expected to provide information about the influence of the structure of the surfactant system on microemulsions, using a homologous alcohol series as cosurfactant and potassium oleate as surfactant. In this system the region of solubilization is characteristically divided from the region of microemulsification by a zone of instability. Furthermore, there are distinct differences in mean particle sizes between microemulsions (9-30 nm) and micellar solutions (4-6 nm).
Several component diagrams for different alcohols as cosurfactants and potassium oleate as the surfactant were investigated. Between the regions of the water-in-oil microemulsion and the micellar solution (reverse micelles), and diagrams showed a zone of instability which was determined by particle size analysis by means of photon correlation spectroscopy (PCS). The polydispersity of the internal phase was determined at the instant of microemulsion formation and after fixed intervals of storage. At the edge of the microemulsion region, a rapid increase in particle size due to coalescence followed by breaking was observed. If a slow transition toward the region of solubilization could be seen by a slow decrease of the droplet size, coalescence was observed after storage. In the middle of the microemulsion region, the particle radius, however, was almost constant for a long interval. The velocity of the microemulsion formation depended on the alcohol used. In some cases a very fast formation (milliseconds) was observed; in others, macroemulsions were formed which became transparent within a few hours or days. PCS was used to follow the dynamic process of formation and breaking of such systems with droplet diameters of 5-200 nm by obtaining the mean hydrodynamic diameters. Distribution curves were calculated by the Laplace transform of the correlation function. The practicability of the method was demonstrated with mono- and polydispersed latex suspensions and microemulsions.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
BACKGROUND: Gene transfer into the airways could be of importance for the treatment of chronic lung diseases such as cystic fibrosis. In the past few years several attempts have been made to effectively deliver DNA to the lung using different viral and non-viral vector systems. Viral vectors and cationic lipids have been tested intensively but the properties of cationic polymers such as polyethylenimine (PEI) 25 kDa and fractured polyamidoamine dendrimers to deliver DNA to the airways have not been studied. Surfactant preparations have been shown to influence pulmonary adenoviral and naked plasmid DNA mediated gene transfer in vivo. We investigated the gene delivery efficiency of branched PEI 25 kDa and fractured dendrimers to the murine lung in vivo and also examined the effect of surfactant on PEI 25 kDa mediated gene transfer to the lung. METHODS: Cationic polymer/DNA complexes were prepared in 25 mM HEPES buffer (pH = 7.4) or double distilled water and administered to the lungs of BALB/c mice via cannula intubation. The trachea, left and right lung, heart, liver and esophagus were examined for luciferase activity. Inflammation was assessed by performing standard histology. RESULTS: PEI/DNA complexes showed a high level of luciferase gene expression in the lung. Complexes formed in double distilled water exhibited higher gene expression than complexes formed in 25 mM HEPES buffer (pH 7.4). The optimal N/P ratio was found to be N/P = 10 in double distilled water. Luciferase activity was only detected in the lung and decreased rapidly in a time-dependent manner. The addition of a natural surfactant preparation, Alveofact, slightly reduced gene transfer of branched PEI 25 kDa. Luciferase gene expression obtained by using fractured dendrimers was very low. CONCLUSION: The present study demonstrates that PEI 25 kDa, but not polyamidoamine dendrimers, effectively mediates transient gene transfer to the murine lung after intratracheal intubation. In conclusion, branched PEI 25 kDa was found to be an effective vector for pulmonary gene delivery in vivo, being superior to fractured dendrimers.
BACKGROUND: Aerosol drug delivery currently represents the most acceptable and convenient delivery system for repeated drug application to the lungs. Although polyethyleneimine (PEI) has recently been demonstrated to mediate gene transfer successfully to mouse lungs via aerosol delivery, the effect of the jet nebulization process on the properties of PEI/DNA polyplexes has not yet been examined. METHODS: PEI/DNA polyplexes were generated in several commonly used solvents, such as distilled water, HEPES buffered saline (HBS), and 5% glucose. The complex parameters, such as particle size, zeta potential, DNA integrity, and transfection efficiency, were examined before and after jet nebulization. RESULTS: The complex parameters and the transfection efficiency were influenced by the solvent that was used for complex formulation and by the nebulization process itself. When polyplexes were formulated in HBS, the particle size, zeta potential, and DNA concentration were affected by the nebulization process and the transfection efficiency decreased dramatically. Polyplexes formulated in 5% glucose were less susceptible to the nebulization process, as indicated by only minor changes of the zeta potential and particle size when compared with HBS. The resulting transfecion efficiency was very low both before and after nebulization. Polyplexes formulated in distilled water had the most resistant behavior with the nebulization process. Zeta potential, particle size, and DNA integrity were influenced least of all by nebulization. CONCLUSION: As a result, the transfection efficiency of PEI/DNA complexes remained constant throughout the nebulization process only when formulated in distilled water. These data suggest that distilled water represents the most appropriate solvent for polyplex formulation when delivered by jet nebulization.
Modification of the dissolution rate and, thus, the enhancement of the bioavailability of a dopaminergic drug, piribedil, which has a low aqueous solubility and short elimination half-life have been the aim in this study. Preparations of micron and submicron particles using solid lipid carriers have been performed for this purpose. For the avoidance of solvent residues resulting from the preparation technique, cold and hot homogenization methods have been used to prepare solid lipid particles. After obtaining an appropriate particle size, piribedil loading and preparation yield by the use of those two methods, various formulations have been prepared with different lipid, drug and surfactant materials. The factors mentioned were found to affect properties of the particles, and the release rate was found to be the fastest in acidic medium. Suspensions of pure piribedil and a formulation, selected according to the results obtained from in vitro dissolution and particle size experiments, were compared using tremor tests in mice. The same suspensions were applied perorally to rabbits and bioavailability of the solid lipid particle was found to be higher than the pure piribedil. After an in vitro-in vivo evaluation of piribedil solid lipid particles developed for Parkinson's disease therapy, it has been determined that release rate could be controlled and piribedil bioavailability could be improved.
The purpose of this study was to investigate possible immunomodulatory and cytotoxic effects of solid lipid nanoparticles (SLN) on murine peritoneal macrophages. Immunomodulatory effects of SLN composed of either a lipid- (glycerol-behenate) or a wax (cetylpalmitate) matrix stabilized by the surfactant Poloxamer 188 were analysed by detection of proinflammatory and down-regulatory cytokines in supernatants of thioglycollate-elicited peritoneal macrophages using enzyme-linked immunosorbent assay (ELISA). Cytotoxicity of SLN was assessed using the ITT test. Incubation of macrophages with either SLN at low concentrations did not increase production of interleukin (IL)-6, IL-12, and tumour necrosis factor (TNF)-alpha. At higher SLN concentrations, a concentration-dependent decrease in IL-6 secretion was observed compared to background production of IL-6 by untreated macrophages. IL-12 and TNF-alpha production was neither detected in supernatants of macrophages treated with SLN at any concentration nor in those of untreated cells. The decrease in IL-6 secretion was paralleled by concentration-dependent cytotoxicity of SLN on these cells. In contrast, incubation with polystyrene reference particles neither resulted in decreased IL-6 production nor in a loss of viability. SLN-treated macrophages were found to up-regulate their cytokine production following stimulation with Pansorbin, despite the concentration-dependent cytotoxicity induced by SLN. Down-regulatory effects on SLN-treated macrophages by IL-10 were not observed. In conclusion, incubation of SLN with murine peritoneal macrophages did not induce the production of proinflammatory and down-regulatory cytokines. At high concentrations of SLN, cytotoxic effects on these cells were observed. Cytotoxicity appears to be the main cause of decreased cytokine production by these cells.
Solid lipid nanoparticles (SLN, Lipopearls) are nanoparticles made from solid lipids by high pressure homogenization. Incorporation of chemically labile active ingredients into the solid lipid matrix protects against chemical degradation, which is shown for vitamin E. The SLN are physically stable in aqueous dispersions and also after incorporation into a dermal cream as proven by photon correlation spectroscopy and differential scanning calorimetry. Electron microscopy and atomic force microscopy data reveal the spherical shape of the SLN and the detailed structure of the particle surface. Ultrafine particles form an adhesive film leading to an occlusive effect on the skin. The occlusion promotes the penetration of vitamin E into the skin, as shown by the stripping test. In addition to chemical stabilization of active ingredients, occlusive effects on the skin and subsequent enhanced penetration of compounds, the SLN also possess a pigment effect covering undesired colours leading to an increased aesthetic acceptance by the customer.
The contribution of mono-, di- and trivalent ions to the destabilization of solid lipid nanoparticle (SLN) dispersions was investigated, i.e. particle growth and subsequent formation of semi-solid gels. Sodium, calcium and aluminium chloride were added in varying concentrations to a Compritol formulation which had proved to be highly sensitive towards destabilizing effects. Dispersions containing up to 10(-3) M sodium chloride remained stable for 14 days. The same concentrations of calcium or aluminium induced slight and rapid particle growth, respectively. Generally, a pronounced destabilizing effect was observed with increasing electrolyte concentration and increasing valence. Higher concentrations of electrolyte (10(-2), 10(-1) M) induced gelation of the systems. The extent of solidification was highly dependent on the crystallinity of the lipid phase. The recrystalization indices of the gels were distinctly higher compared to the liquid systems. Additionally, unstable modifications, being present in liquid dispersions, were transformed into stable ones with increasing solidification. The mechanisms of the destabilizing effect of the electrolytes are reduced electrostatic repulsion and transformation of the lipid Compritol to the beta' modification promoting gel formation.
Application of drug substances to the skin for systemic absorption or action in a particular layer of the skin is a rather old approach. However, over the last years it has received much more attention, as a consequence of the development of new membrane-moderated and matrix reservoir devices. As new reservoir systems, solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) have been successfully tested for dermal application of different physicochemical substances. The knowledge obtained from rheological investigations of these systems may be highly useful for the characterization of the newly developed topical formulation. In the present study, an oscillation frequency sweep test was used for the evaluation of storage modulus (G'), loss modulus (G''), and complex viscosity (eta*) of twelve different SLN and NLC formulations, over a frequency range from 0 to 10 Hz. The lipidic aqueous dispersions were prepared using three different solid lipids (Softisan138, Compritol888, and stearyl alcohol) as matrix material. Miglyol812, tocopherol, sunflower oil, and long-chain triacylglycerols were the chosen liquid lipids for NLC preparation. The objective of the present work was to investigate the effect of these different liquid lipids on the rheological properties of aqueous dispersions of NLC as model systems. It was found that the liquid oil component of the formulation has a strong influence on the viscoelastic parameters, which are dependent on the particle size, zeta potential, and crystallinity of the lipid particles, as well as on the solid lipid used.