PubMed Health⌕ Search

Biomedical subjects

R H Tallents

Publications and source records attributed to R H Tallents.

At least 19 recordsLinked to original sources

Surgical templates for prosthetically guided implant placement.

The article describes a prosthetically guided method for the fabrication of surgical templates for partially edentulous patients. A number of stainless steel components are used to capture the optimal prosthetic position for the placement of the implant determined from a diagnostic arrangement. A radiopaque stainless steel guide sleeve is used to guide the drill in preparation of the osteotomy after radiographs are made to verify the position and proposed trajectory of the guide sleeve.

Acrylic Resins↗

Non-primate lentiviral vector administration in the TMJ.

Gene therapy is emerging as a novel treatment method for the management of temporomandibular joint disorders. The aim of this investigation was to study the effects of lentiviral vectors on the temporomandibular joint. Consequently, we injected into the articular joint space a defective feline immunodeficiency virus capable of infecting dividing as well as terminally differentiated cells with the reporter gene lacZ, the expression of which was studied by means of PCR, X-gal histochemistry, and beta-galactosidase immunocytochemistry. Our results showed successful transduction of hard and soft tissues of the temporomandibular joint. Interestingly, a subset of primary sensory neurons of the ipsilateral trigeminal ganglion also stained positive for the reporter gene, presumably following uptake of the lentiviral vector by peripheral nerve fibers and retrograde transport to the nucleus. These findings suggest that lentiviral vectors can potentially serve as a platform for the transfer of anti-nociceptive genes for the management of temporomandibular joint pain.

Animals↗

An anatomical and radiographic study of medial depression of the human mandibular ramus.

OBJECTIVES: To determine the prevalence of the medial depression of mandibular ramus (MDMR) in dry human mandibles and in clinical panoramic radiographs and to compare the prevalence in dentoskeletal deformities with Angle Class I occlusion. METHODS: Two hundred and fifty-one dry skulls and three groups of patients were used for this study: Group 1 consisted of 1358 panoramic radiographs from a general population, Group 2, 426 radiographs from individuals with Angle class I occlusion and Group 3283 individuals with dentoskeletal deformities. The prevalence of MDMR was determined in the skulls and each group and the shape from the radiographs alone. RESULTS: The prevalence of MDMR in dry mandibles was 33.9% (bilateral in 13.1% and unilateral in 20.8%). MDMR was found in 276 radiographs (20.3% - Group 1 - bilateral in 40% and unilateral in 59.5%). MDMR was more common in Group 3 compared with Group 2 (chi(2)=35.98 P<0.01). A triangular MDMR was the most frequent (39.7%). CONCLUSION: MDMR is a relatively common finding in panoramic radiographs. Patients with dentoskeletal deformities have a higher prevalence of MDMR and this should be taken into consideration if orthognathic surgery is proposed.

Adolescent↗

MR evidence of temporomandibular joint fluid and condyle marrow alterations: occurrence in asymptomatic volunteers and symptomatic patients.

The purpose of this study was to estimate the frequency and amount of temporomandibular joint (TMJ) fluid, as well as the frequency and type of condyle marrow alterations in asymptomatic volunteers and compare to patients with TMJ pain and dysfunction. Proton-density and T2 weighted magnetic resonance (MR) images of the TMJs of 62 asymptomatic volunteers and 58 symptomatic patients were analysed for fluid and condyle marrow alterations as well as disk position. The amount of fluid (increased T2 signal) was characterized as none, minimal, moderate or marked and related to the disk position. The differentiation between moderate and marked fluid was based on the maximum amount of fluid seen in the volunteers; more than this amount was categorized as marked fluid. The marrow of the mandibular condyle was categorized as normal, edema (increased T2 signal) or sclerosis (decreased proton-density and T2 signal) and related to fluid and disk position. In the 62 asymptomatic volunteers, 50 (81%) had none or minimal and 12 (19%) had moderate TMJ fluid. In the 58 symptomatic patients, 40 (69%) had none or minimal and 18 (31%) had moderate or marked fluid. Both in volunteers and patients, moderate fluid could be seen in joints with normal disk position, but was significantly associated with disk displacement. In the 62 volunteers, no signal abnormalities in the condyle marrow were found. In the 58 patients, six (10%) had abnormal bone marrow. These six patients had disk displacement and two had moderate or marked fluid. Marked fluid and condyle marrow abnormalities were therefore not encountered in any of the asymptomatic volunteers but in about 10% of the patients.

Adolescent↗

Effect of soldering on metal-porcelain bond strength in repaired porcelain-fused-to-metal castings.

STATEMENT OF PROBLEM: Chemical bonding plays a major role in the adherence between metal and porcelain. The formation of an oxide layer on solder material has not been described in the literature. It is unknown whether the application of solder negatively affects the bond strength between porcelain and metal. PURPOSE: This in vitro study assessed the effect of solder on the bond strength between metal and porcelain. MATERIAL AND METHODS: Forty 20 x 6 x 0.5 mm patterns were divided into test (20) and control (20) groups. Test samples were perforated and repaired with solder, and 2 layers of opaque and dentin porcelain subsequently were applied on all samples. The samples were subjected to a 3-point flexural test on a screw-driven mechanical testing machine at a crosshead speed of 0.5 mm/min. Failure type (adhesive vs cohesive) was quantified by digitizing photographs of test and control samples. Three samples in each group also were examined with an SEM coupled with an x-ray energy-dispersive spectroscopy apparatus (SEM/EDS). Means and standard deviations of loads at failure, sample thickness, and surface area covered with porcelain were calculated, and data were analyzed with Student t test (P < or = 0.05). RESULTS: The mean fracture load for test samples was significantly greater than for control samples (P = 0.0038). Test samples also were significantly thicker (mean thickness difference 0.14 mm) (P = 0.0001). When the data were controlled for thickness by using a multiple linear regression analysis, no significant difference was found (P = 0.68). Test samples had a greater surface area covered with opaque porcelain (P = 0.0006) as determined by visual inspection. CONCLUSION: In this study, soldered and nonsoldered samples did not show any significant difference in porcelain-to-metal bond strength. Visual analysis revealed a significant difference in the amount of porcelain remaining on the fracture surface of the test and control samples; a complete quantitative elemental analysis with SEM/EDS is in progress.

Dental Porcelain↗

Effect of ring liner and casting ring temperature on the dimension of cast posts.

STATEMENT OF PROBLEM: If a post does not fit passively, binding with the radicular tooth structure occurs, possibly increasing the risk for root fracture. Therefore, it is necessary to fabricate slightly undersized cast posts to allow for passive fit and cement placement. Shrinkage of the mold cavity may be a desired effect during the casting of posts. PURPOSE: This study evaluated the influence of: (1) a cellulose ring liner, and (2) a lower casting temperature of the metal ring, on the dimensions of a cast post. MATERIAL AND METHODS: Eighty plastic posts were divided in 4 equal groups (group 1, 815 degrees C, liner; group 2, 815 degrees C, no liner; group 3, 600 degrees C, liner; and group 4, 600 degrees C, no liner), invested in phosphate-bonded investment and cast with a noble alloy. Posts were measured at 2 locations, the tip and base, before and after casting. RESULTS: Investing in a lined metal ring and using a casting ring temperature of 815 degrees C (group 1) resulted in markedly oversized posts (tip: +25.8 microm; base: +20.3 microm). The absence of the cellulose liner in the casting ring (group 2) decreased the expansion of the investment producing slightly oversized castings (tip: +9.75 microm; base: +4.52 microm). Lined rings that were heated to a final temperature of 600 degrees C (group 3) produced posts that were oversized (tip: +16.65 microm; base: +11.05 microm). Final casting ring temperature of 600 degrees C and the absence of a cellulose liner (group 4) resulted in posts slightly undersized (tip: -4.1 microm; base: -2.2 microm). CONCLUSION: The use of 2 casting ring temperatures (815 degrees C or 600 degrees C) and the influence of a ring liner were investigated. Decreasing the casting ring temperature from 815 degrees C to 600 degrees C and the absence of a ring liner significantly decreased the dimensions of a cast post.

Analysis of Variance↗

Influence of metal surface finishing on porcelain porosity and beam failure loads at the metal-ceramic interface.

STATEMENT OF THE PROBLEM: Investigators suggest that metals should be finished in 1 direction before porcelain application to minimize metal irregularities and trapped contaminants. These irregularities are thought to be focal points for porosity and crack propagation. PURPOSE: This study investigated the influence of metal finishing and sandblasting on (1) porosity production at the porcelain-metal interface, and (2) porcelain-metal beam failure load. MATERIAL AND METHODS: Eighty cast metal samples were divided into 4 test groups: (A) bidirectional finish/sandblasting; (B) unidirectional finish/sandblasting (C) bidirectional finish only; and (D) unidirectional finish only. The porcelain applied was 1.5 mm thick. Samples were sectioned longitudinally. Half of the samples were subjected to a 3-point flexural test. The remaining samples were sectioned into 4 slices and were examined with a light microscope (x500). Number and diameter of porosities at the metal-porcelain interface were recorded. RESULTS: Mean loads at failure (lbs) were as follows: A, 11.1 +/- 1.3 (5.03 +/- 0.58 Kg); B, 11.2 +/- 1.7 (5. 08 +/- 0.77 Kg); C, 4.0 +/- 1.8 (1.81 +/- 0.81 Kg); and D, 5.0 +/- 2. 1 (2.26 +/- 0.95 Kg). Groups A and B were significantly different from groups C and D (P<.0001). Nonsandblasted samples (C and D) exhibited a separation at the ceramometal interface, which prevented quantification of porosity size and number. Average interface porosity sizes (microm) (A, 8.99 +/- 1.92; B, 10.03 +/- 1.86) showed no significant difference. The mean interface porosity number (A, 62. 3 +/- 16.02; B, 67.4 +/- 10.01) showed no significant difference. CONCLUSION: Direction of metal finishing did not affect the porosity number and size at the ceramometal interface or the beam failure loads. Sandblasting increased the beam failure loads. Nonsandblasted samples showed detachment of the porcelain from the metal.

Aluminum Oxide↗

Prevalence of dental occlusal variables and intraarticular temporomandibular disorders: molar relationship, lateral guidance, and nonworking side contacts.

STATEMENT OF PROBLEM: The association between dental occlusion and the development of intraarticular temporomandibular disorders remains unclear. PURPOSE: This study evaluated the prevalence of molar relationship, lateral guidance and nonworking side contacts and intraarticular temporomandibular disorders. MATERIAL AND METHODS: Eighty-two asymptomatic volunteers and 263 symptomatic temporomandibular disorder (TMD) patients completed a subjective questionnaire that documented the absence of jaw pain, joint noise, locking, and a positive history for TMD. Participants also underwent clinical and dental examination for signs and symptoms commonly associated with TMD or internal derangements. RESULTS: The most prevalent molar relationship was Class I. Symptomatic patients had a higher prevalence of Class II, Division 1 relationships on the left side compared with the asymptomatic volunteers with normal joints. There was a higher prevalence of canine guidance (52.04%; P <.005) on the right side in the symptomatic patients with disk displacement (DD). Volunteers with normal joints had a higher prevalence of 1 or more nonworking side contacts compared with symptomatic patients with normal joints (P <.001) and symptomatic patients with DD (P <. 001). CONCLUSION: This study suggests there are no systematic dental occlusal differences that clearly separate symptomatic from asymptomatic patients. Results indicate that it is unclear as to the relationship of the 3 analyzed factors and of intraarticular TMDs.

Chi-Square Distribution↗

Condyle position as a predictor of temporomandibular joint internal derangement.

STATEMENT OF PROBLEM: The significance of the position of the mandibular condyle in the glenoid fossa remains a controversial subject. PURPOSE: This study evaluated the relationship between condyle position and disk displacement. MATERIAL AND METHODS: Fifty-two asymptomatic volunteers and 130 symptomatic patients underwent linear tomography and bilateral temporomandibular joint magnetic resonance scans. RESULTS: There was a higher prevalence of distal condyles in symptomatic patients with disk displacement compared with asymptomatic volunteers (P <.05). Distally positioned condyles identified joints with disk displacement with reduction, disk displacement without reduction, or a symptomatic normal joint with a sensitivity of 0.64, 0.56, and 0.33, respectively. Distally positioned condyles identified joints with disk displacement with reduction, disk displacement without reduction, or a symptomatic normal joint with a specificity of 0.56, 0.65, and 0.55, respectively. CONCLUSION: There were more distal condyles in symptomatic subjects with disk displacement, but the reliability of a distal condyle to predict the presence or absence of disk displacement was low.

Cephalometry↗

Face-bow record without a third point of reference: theoretical considerations and an alternative technique.

Accurate mounting of dental casts is achieved by transferring the tridimensional spatial relationship of the maxillary arch to an articulator. A face-bow is used to transfer this relationship to the articulator, usually by relating the face-bow to a plane of reference. The most common reference plane is the Frankfort plane, which has been assumed to be horizontal when the patient is in the natural head position. The axis-orbitale plane has also been considered horizontal and used as reference. However, it has been shown that both planes are not horizontal, and mounting a maxillary cast according to these planes can result in an inaccurate mounting. This article describes an alternative procedure for face-bow transfer without a plane of reference, and uses the angular relationship between the occlusal plane and the condylar path to mount the maxillary cast on the articulator. The elimination of a reference plane, to which relate the functional determinants of occlusion, avoids an additional source of error during the mounting procedure.

Cephalometry↗

Osteoarthritis and abnormal bone marrow of the mandibular condyle.

OBJECTIVE: The purpose of this study was to analyze the relationship between abnormal bone marrow of the mandibular condyle and osteoarthritis. STUDY DESIGN: The relationship between abnormal bone marrow and osteoarthritis of the mandibular condyle was analyzed in magnetic resonance images of the temporomandibular joints of 74 patients. Thirty-seven patients had magnetic resonance evidence of abnormal bone marrow, and 37 control patients had magnetic resonance images with normal bone marrow. RESULTS: Fifteen of 37 patients with magnetic resonance evidence of abnormal bone marrow had no magnetic resonance evidence of osteoarthritis; the other 22 patients had both abnormal bone marrow and osteoarthritis. CONCLUSIONS: Abnormal bone marrow of the mandibular condyle can occur separately from osteoarthritis; nearly one half of the joints with magnetic resonance evidence of abnormal bone marrow did not have any evident osteoarthritis. Abnormal bone marrow may therefore initially represent a separate disease entity. Over time, secondary osteoarthritis probably develops in joints with initial bone marrow abnormalities.

Adolescent↗

The effect of surgically induced anterior disc displacement of the temporomandibular joint on the midface and cranial base.

OBJECTIVE: The purpose of this study is to investigate the effect of unilateral TMJ disc displacement on the midface and cranial base. STUDY DESIGN: Thirteen 10-week-old rabbits, eight controls and five experimental were included in this study. The five experimental rabbits had surgically created unilateral disc displacement. Animals were sacrificed at 22 weeks and frontal, occlusal, and lateral oblique radiographs were made of the skulls. RESULTS: The occlusal radiograph demonstrated that the glenoid fossa on the experimental side was located more anterior. The oblique radiograph demonstrated the root of the zygomatic arch the experimental side was inferior. The anterior aspect of the fossa was more inferior on the frontal radiograph. CONCLUSIONS: A previous study suggested a shortening in the ramal height. This study suggests an alteration of the cranial articular fossa. Thus, it is suggested that disc displacement is capable of producing asymmetry in the developing mandible and cranial base.

Animals↗

Association between dental occlusal variables and intraarticular temporomandibular joint disorders: horizontal and vertical overlap.

STATEMENT OF PROBLEM: It has been suggested that dental occlusion may play a role in the development of intraarticular temporomandibular joint disorders. PURPOSE: This study evaluated the relationship between horizontal and vertical overlap and intraarticular temporomandibular joint disorders. MATERIAL AND METHODS: Vertical and horizontal overlap of the anterior teeth of 82 asymptomatic volunteers and 263 symptomatic patients were examined. RESULTS: Fifty-five (67%) of the asymptomatic volunteers had normal joints and 27 (33%) had disk displacement. Two hundred and twenty-one patients (84%) had disk displacement and 42 (16%) had bilateral symptomatic normal joints. Horizontal overlap equal to or greater than 4 mm was more prevalent in the symptomatic patient group as compared with the asymptomatic volunteer group (p < 0.05). Vertical overlap equal to or greater than 4 mm demonstrated no significant differences. CONCLUSION: Horizontal overlap equal to or greater than 4 mm was greater in symptomatic patients with intraarticular temporomandibular joint disorders.

Adult↗

Alternative procedure for making a metal suprastructure in a milled bar implant-supported overdenture.

The predictability of implant-supported prostheses has been established. Although the original Brånemark design has been successfully used in the mandible, esthetic, speech, and hygiene-related problems have been reported in maxillary fixed prostheses. Implant-overdentures can overcome some of the problems encountered in maxillary fixed prostheses. Milled-bar implant-supported overdentures fabricated by electric discharge machining are characterized by stability similar to a fixed prostheses and are removable for hygiene procedures. However, the procedure is costly and requires highly trained technicians. An alternative procedure to produce an accurately fitting metal suprastructure is presented. This procedure does not require additional technical skills and uses instruments and materials that are readily available and relatively inexpensive. The use of simple and easy to replace attachments allows repairs to be performed in the dental office, thus reducing maintenance cost. The overall result is a prosthesis that incorporates the features of a spark erosion overdenture at a fraction of the cost and that is available to a broader patient population.

Costs and Cost Analysis↗

Lateral cephalometric analysis of asymptomatic volunteers and symptomatic patients with and without bilateral temporomandibular joint disk displacement.

Few studies of dentofacial and orthodontic structural relationships relative to temporomandibular joint (TMJ) dysfunction have been reported. We undertook this investigation to determine any correlation of orthodontic and dentofacial characteristics with TMJ bilateral disc displacement. The population of patients was selected from a TMJ clinic where a control group of asymptomatic volunteers had been previously established and standardized. Differences in skeletal structural features were determined among three study groups: (1) asymptomatic volunteers with no TMJ disk displacement, (2) symptomatic patients with no TMJ disc displacement, and (3) symptomatic patients with bilateral TMJ disk displacement. Thirty-two asymptomatic volunteers without disk displacement (25 female, 7 male) were compared with the same number each of symptomatic patients without TMJ disk displacement and symptomatic patients with bilateral TMJ disk displacement. All subjects had undergone a standardized clinical examination, bilateral TMJ magnetic resonance imaging, and lateral cephalometric radiographic analysis. The groups were matched according to sex, TMJ status, age, and Angle classification of malocclusion. Seventeen lateral cephalometric radiographic cranial base, maxillomandibular, and vertical dimension variables were evaluated and compared among the study groups. The mean angle of SNB, or the intersection of the sella-nasion plane and the nasion-point B line (indicating mandibular retrognathism relative to cranial base), of the symptomatic patients-with-displacement group was significantly smaller than that in the asymptomatic volunteers and symptomatic patients without bilateral disk displacement (p < 0.05). Female subjects showed smaller linear measurements of mandibular length, lower facial height, and total anterior facial height than male subjects in all three groups (p < 0.05). The mean angle of ANB, or the intersection of the nasion-point A and nasion-point B planes (indicating retrognathism of mandible relative to maxilla), was significantly greater in female than in male subjects, in all groups (p < 0.05). Symptomatic patients with bilateral disk displacement had a retropositioned mandible, indicated by a smaller mean SNB angle compared with that in asymptomatic volunteers and symptomatic patients with no disk displacement on either side. Lateral cephalometric radiographic assessment may improve predictability of TMJ disk displacement in orthodontic patients but is not diagnostic; nor does the assessment explain any cause-and-effect relationship.

Adult↗

Loose joint bodies of the temporomandibular joint: a case report.

Osteochondral loose bodies are an uncommon finding in the temporomandibular joint (TMJ), but occur relatively frequently in large joints such as the knee, elbow, hip, wrist, and ankle. Loose joint bodies can be divided in three groups: 1) synovial chondromatosis; 2) osteochondral fracture fragments and; 3) cases of degenerative arthritis or avascular necrosis. The most common clinical features of loose joint bodies are pain, swelling, joint noise and impaired joint movements. A case of loose joint bodies of the temporomandibular joint is presented. The pantomograph and lateral cephalograph revealed several irregularly shaped, variably sized radiopaque structures in the region of the right temporomandibular joint. CT and MR scans confirmed the initial diagnosis. The dimensions of the loose joint bodies varied from 1-2 to 5-6 mm. In this patient, the loose joint bodies may have been secondary to osteoarthritis, may have preceded and caused the degenerative changes, or may be only a coincidental finding.

Chondromatosis, Synovial↗

Mandibular and maxillary asymmetry in individuals with unilateral cleft lip and palate.

OBJECTIVE: This study was conducted to evaluate the degree of maxillary and mandibular asymmetry in the verticle and transverse planes seen in posteroanterior cephalometric radiographs relative to chronologic age in postoperative complete UCLP patients compared to controls. METHOD: Mandibular and nasomaxillary asymmetry was retrospectively studied in complete unilateral cleft lip and palate (UCLP) and noncleft individuals (controls) by means of posteroanterior cephalometric analysis. All the UCLP patients available (total 40) and randomly selected noncleft controls (total 142) were included in the study. The UCLP patients had undergone lip and palate reconstruction in Strong Memorial Hospital, University of Rochester, Rochester, New York, and orthodontic treatment in the Department of Orthodontics, Eastman Dental Center, Rochester, New York. The controls were selected based on the age that treatment was initiated and were treated in the department for various malocclusions; none had undergone maxillary expansion or surgical treatment. The asymmetry assessed on mixed longitudinal records of the patients with UCLP was analyzed relative to three chronologic age groups and compared to the controls. In addition, mandibular asymmetry was correlated to maxillary asymmetry in UCLP individuals to investigate possible growth patterns between the two jaws. RESULTS: Mandibular asymmetry in UCLP individuals was found to increase with growth and time and peaked at post-pubertal growth-spurt stages. The cleft subjects were more asymmetric than controls in all stages of growth. Mandibular asymmetry followed the affected maxilla closely, indicating a parallel growth pattern of the jaws. CONCLUSION: The unilateral cleft lip and palate patients manifested asymmetry of the mandible. This asymmetry develops in a parallel pattern with the affected maxilla, suggesting that early evaluation and treatment of the anomalies in the nasomaxillary skeleton as well as in the mandible is necessary when treating unilateral cleft lip and palate individuals.

Adolescent↗