PubMed Health⌕ Search

Biomedical subjects

R J Levy

Publications and source records attributed to R J Levy.

At least 19 recordsLinked to original sources

Enhanced plasmid DNA transfection with lysosomotropic agents in cultured fibroblasts.

Transfer of plasmid DNA into mammalian cells has posed major challenges for gene therapy. Most non-viral vectors are known to internalize in the cells by endocytosis. Therefore, low transfection efficiency of non-viral vectors may be due to intracellular degradation of input DNA in the endosomes and/or lysosomes. DNA degradation can be inhibited either by inactivating the lysosomal enzymes or obliterating endosome fusion to lysosomes using lysosomotropic agents. We report here the effects of individual lysosomotropic agents such as chloroquine, polyvinylpyrolidone (PVP) and sucrose on beta-gal expression in cultured fibroblasts COS, 293 and CHO. Cell viability was influenced by type, exposure time and concentration of lysosomotropic agents. Exposure to chloroquine at high concentration (1000 microM) or more than 4 h at any concentration (10-1000 microM) caused extensive cell death, however, cytotoxicity due to sucrose (5-500 mM) and PVP (0.01-1 mg/ml) was minimal in the cell lines tested. All the agents utilized in this study enhanced the gene expression and the transfection efficiency followed the order of sucrose>chloroquine>PVP at the concentrations used in all cell lines. Results suggest that lysosomotropic agents can enhance transfection efficiency but the degree of transgene expression may be cell- and agent-specific. Of the agents studied, sucrose appears to be an attractive agent in improving gene expression without toxic effect in the cultured fibroblasts. Thus, it can be used as an excipient in the formulation of new gene delivery systems.

Animals↗

Matrix metalloproteinase-2 is associated with tenascin-C in calcific aortic stenosis.

We previously showed that the expression of tenascin (TN-C), an extracellular matrix glycoprotein found in developing bone and atherosclerotic plaque, and matrix metalloproteinase-2 (MMP-2) are coordinated and interdependent in cultured vascular smooth muscle cells. In this study, we hypothesized that TN-C and MMP-2 are mechanistically involved in the pathobiology of calcific aortic stenosis. Human calcific aortic stenosis cusps demonstrated immunohistochemically prominent deposition of TN-C, MMP-2, and alkaline phosphatase activity, as well as MMP-2 gelatinolytic activity. Although far lesser amounts of TN-C were noted in several of the grossly non-calcified valve cusps, MMP-2 and AP were never detected. Further, when aortic valve interstitial cells (both sheep and human) were cultivated on collagen supplemented with TN-C, both MMP-2 mRNA expression and MMP-2 gelatinolytic activity (both pro and active forms), were up-regulated compared to control. These observations support the view that accumulation of first TN-C and then MMP-2 are associated with progression of calcification. The residual presence of these proteins in severe calcifications is indicative of their involvement in the pathogenesis.

Animals↗

High reactivity of alkyl sulfides towards epoxides under conditions of collagen fixation--a convenient approach to 2-amino-4-butyrolactones.

Epoxy crosslinking agents have been investigated for use in the fabrication of bioprosthetic devices, such as heterograft heart valve prostheses. It has been generally assumed that epoxy crosslinking takes place via amino-epoxy reactions. The present study investigated the hypothesis that the reactions of methionine residues with epoxides also can occur in biomaterial crosslinking. A series of model reactions were studied in which a mono-epoxide was combined with individual alkyl sulfides. In the present studies epoxides rapidly alkylate aliphatic sulfides, including methionine derivatives, in buffered aqueous solutions at room temperature and pH close to neutral, forming sulfonium compounds, which are stable at pH 5-7 at temperatures up to 50 degrees C, except for cases in which methionine derivatives with non-protected carboxy groups are used. The rate of reaction remains practically unchanged within the range of pH from 5 to 12, whereas in strongly alkaline media the reverse reaction occurs. This discovery can provide a better understanding of processes occurring in the fixation of bioprosthetic tissues with polyepoxides. It can also develop into a site-specific method to label methionine residues in proteins. The carboxy group-containing sulfonium betaines derived from N-protected methionines undergo cyclization in unexpectedly mild conditions, which can be used as an efficient method for preparation of N-protected 2-amino-4-butyrolactones with sensitive protective groups.

4-Butyrolactone↗

Localized adenovirus gene delivery using antiviral IgG complexation.

Gene therapy with viral vectors has progressed to clinical trials. However, the localization of viral vector delivery to diseased target sites remains a challenge. We tested the hypothesis that an adenoviral vector could be successfully delivered by complexation with a specific antibody that is bound to a biodegradable matrix designed for achieving localized gene transduction. We report the first successful delivery system based upon antibody immobilization of virions in a type I collagen-avidin gel using a polyclonal biotinylated IgG specific for the adenovirus hexon. In vitro stability studies demonstrated retention of viral vector activity with antibody-complexed adenovirus collagen gel preparations, in comparison to loss of vector activity from collagen gels prepared with nonspecific biotinylated IgG. Cell culture investigations using this antibody-controlled release system for adenoviral vector transduction of rat aortic smooth muscle cells (A10) demonstrated a significantly more localized reporter expression (beta-galactosidase) compared with non-antibody-complexed controls. Herpes simplex thymidine kinase (HSVtk) adenoviral vectors were immobilized on avidin-collagen gels via this antibody-complexation approach, and ganciclovir was added to rat smooth muscle cells (A10) in culture with the gels. With complexed HSVtk adenovirus, only cells either in contact with the virus-containing gel or within 50 microm were killed. By comparison, at the same adenovirus and ganciclovir dose, non-antibody-complexed HSVtk adenoviral delivery with ganciclovir resulted in the death of virtually all cells. Myocardial gene transfer studies in pigs demonstrated significantly more efficient right ventricular adenoviral GFP expression with anti-hexon antibody-complexed matrix injections, compared with direct vector injections. Thus, our results show that matrix formulations based on antibody-complexation delivery of adenovirus resulted in site-specific localization of transgene expression that enhances the efficiency of therapeutic vector strategies and provides a potent means for localization, to avoid distal side-effects. This approach has therapeutic potential as an implantable preparation that through the means of antibody-complexation, can localize and optimize viral vector gene therapy.

Adenoviridae↗

Inhibition of matrix metalloproteinase activity attenuates tenascin-C production and calcification of implanted purified elastin in rats.

Elastin, a major extracellular matrix protein present in arterial walls provides elastic recoil and resilience to arteries. Elastin is prone to calcification in a number of cardiovascular diseases including atherosclerosis and bioprosthetic heart valve mineralization. We have recently shown that purified elastin when implanted subdermally in rats undergoes severe calcification. In the present study, we used this elastin implant model to investigate the molecular mechanisms underlying elastin calcification. Intense matrix metalloproteinase (MMP-2) and tenascin-C (TN-C) expression were seen in the proximity of the initial cal-cific deposits at 7 days. Gelatin zymography studies showed both MMP-2 (latent and active form) and MMP-9 expression within the implants. To investigate the role of MMPs in calcification, rats were administered a MMP inhibitor, (2S:-allyl-N:-hydroxy-3R:-isobutyl-N:-(1S:-methylcarbamoyl-2-ph enylet hyl)-succinamide (BB-1101) by daily injection, either systemically or at the implant site. The site-specific BB-1101 administration almost completely suppressed TN-C expression, as shown by immunohistochemical staining, within the implants. The systemic BB-1101 injections also significantly reduced TN-C expression within the elastin implants. Moreover, calcification of elastin implants was significantly reduced in the site-specific administration group (5.43 +/- 1.03 microg/mg Ca for BB-1101 group versus 21.71 +/- 1.19 for control group, P: < 0.001). Alizarin Red staining clearly showed that the elastin fibers were heavily calcified in the control group, whereas in BB-1101 group the calcification was scarce with few fibers showing initial calcification deposits. The systemic administration of BB-1101 also significantly reduced elastin calcification (28.07 +/- 5.81 control versus 16.92 +/- 2.56 in the BB-1101 group, P: < 0.05), although less than the site-specific administration. Thus, the present studies indicate that MMPs and TN-C play a role in elastin-oriented calcification.

Alkaline Phosphatase↗

Pediatric airway issues.

Airway management in the pediatric patient requires an understanding and knowledge of the differences and characteristics unique to the child and infant. New and exciting techniques are currently being explored and developed for management of the pediatric airway. Technology in the area of imaging has allowed clinicians to better visualize the airway and aberrations of it. Presently, there are many different modes and routes of ventilation and oxygenation that are being applied to the pediatric patient for different disease states. Work continues to probe for methods and ways that will allow us to take care of infants and children better and to provide the safest and most effective means of delivering that care. No doubt, there will be more advances and exciting ideas to come that lead to better management of the pediatric airway.

Age Factors↗

Gene delivery from a DNA controlled-release stent in porcine coronary arteries.

Expandable intra-arterial stents are widely used for treating coronary disease. We hypothesized that local gene delivery could be achieved with the controlled release of DNA from a polymer coating on an expandable stent. Our paper reports the first successful transfection in vivo using a DNA controlled-release stent. Green fluorescent protein (GFP) plasmid DNA within emulsion-coated stents was efficiently expressed in cell cultures (7.9% +/- 0.7% vs. 0.6% +/- 0.2% control, p < 0.001) of rat aortic smooth muscle cells. In a series of pig stent-angioplasty studies, GFP expression was observed in all coronary arteries (normal, nondiseased) in the DNA-treated group, but not in control arteries. GFP plasmid DNA in the arterial wall was confirmed by PCR, and GFP presence in the pig coronaries was confirmed by immunohistochemistry. Thus, DNA-eluting stents are capable of arterial transfection, and could be useful as delivery systems for candidate vectors for gene therapy of cardiovascular diseases.

Animals↗

Sustained delivery and expression of DNA encapsulated in polymeric nanoparticles.

Sustained release polymeric gene delivery systems offer increased resistance to nuclease degradation, increased amounts of plasmid DNA (pDNA) uptake, and the possibility of control in dosing and sustained duration of pDNA administration. Furthermore, such a system lacks the inherent problems associated with viral vectors. Biodegradable and biocompatible poly(DL-lactide-co-glycolide) polymer was used to enacapsulate pDNA (alkaline phosphatase, AP, a reporter gene) in submicron size particles. Gene expression mediated by the nanoparticles (NP) was evaluated in vitro and in vivo in comparison to cationic-liposome delivery. Nano size range (600 nm) pDNA-loaded in poly(DL-lactide-co-glycolide) polymer particles with high encapsulation efficiency (70%) were formulated, exhibiting sustained release of pDNA of over a month. The entrapped plasmid maintained its structural and functional integrity. In vitro transfection by pDNA-NP resulted in significantly higher expression levels in comparison to naked pDNA. Furthermore, AP levels increased when the transfection time was extended, indicating sustained activity of pDNA. However, gene expression was significantly lower in comparison with standard liposomal transfection. Seven days after i.m. injections in rats, naked pDNA and pDNA-NP were found to be significantly more potent (1-2 orders of magnitude) than liposomal pDNA. Plasmid DNA-NP treatment exhibited increased AP expression after 7 and 28 days indicating sustained activity of the NP.

3T3 Cells↗

Prevention of glutaraldehyde-fixed bioprosthetic heart valve calcification by alcohol pretreatment: further mechanistic studies.

BACKGROUND AND AIM OF THE STUDY: Calcification is a major cause of failure of bioprosthetic heart valves derived from glutaraldehyde-crosslinked bovine pericardium or porcine aortic valve (PAV) cusps. Recently, we have shown that ethanol pretreatment of PAV cusps prevents calcification in animal models. METHODS AND RESULTS: In this study we showed that ethanol pretreatment was equally effective in preventing calcification of glutaraldehyde-crosslinked bovine pericardium (control Ca2+ = 121.16+/-7.49 microg/mg tissue; ethanol-pretreated Ca2+ = 2.95+/-0.78 microg/mg). Furthermore, other low-molecular weight alcohols such as methanol and isopropanol were also effective in mitigating calcification of PAV cusps. Storage of ethanol-pretreated cusps in glutaraldehyde before implantation allowed partial return of calcification, suggesting a role for ethanol-glutaraldehyde interactions in preventing calcification. However, when ethanol-pretreated cusps were stored in ethanolic glutaraldehyde up to one month, the anti-calcification effect of ethanol persisted. The conditions whereby PAV cusps were crosslinked in pure, non-aqueous, alcoholic glutaraldehyde solutions were also examined. The crosslinking was equivalent to the standard aqueous glutaraldehyde crosslinking as indicated by thermal denaturation temperatures (Td) obtained by differential scanning calorimetry (DSC) and resistance to collagenase digestion. However, these cusps had lower water content and showed a marked decrease in spin-lattice relaxation times (T1) obtained by solid-state proton nuclear magnetic resonance (NMR). Moreover, these cusps calcified heavily in the 21-day rat subdermal implants. Thus, alcohol treatment during glutaraldehyde crosslinking was not useful. CONCLUSION: Glutaraldehyde storage after ethanol pretreatment aggravates calcification; moreover, alcoholic-glutaraldehyde crosslinking solutions are not beneficial for anti-calcification. Ethanol pretreatment of glutaraldehyde-pretreated bovine pericardium prevents its calcification.

2-Propanol↗

Founder's Award, 25th Annual Meeting of the Society for Biomaterials, perspectives. Providence, RI, April 28-May 2, 1999. Tissue heart valves: current challenges and future research perspectives.

Substitute heart valves composed of human or animal tissues have been used since the early 1960s, when aortic valves obtained fresh from human cadavers were transplanted to other individuals as allografts. Today, tissue valves are used in 40% or more of valve replacements worldwide, predominantly as stented porcine aortic valves (PAV) and bovine pericardial valves (BPV) preserved by glutaraldehyde (GLUT) (collectively termed bioprostheses). The principal disadvantage of tissue valves is progressive calcific and noncalcific deterioration, limiting durability. Native heart valves (typified by the aortic valve) are cellular and layered, with regional specializations of the extracellular matrix (ECM). These elements facilitate marked repetitive changes in shape and dimension throughout the cardiac cycle, effective stress transfer to the adjacent aortic wall, and ongoing repair of injury incurred during normal function. Although GLUT bioprostheses mimic natural aortic valve structure (a) their cells are nonviable and thereby incapable of normal turnover or remodeling ECM proteins; (b) their cuspal microstructure is locked into a configuration which is at best characteristic of one phase of the cardiac cycle (usually diastole); and (c) their mechanical properties are markedly different from those of natural aortic valve cusps. Consequently, tissue valves suffer a high rate of progressive and age-dependent structural valve deterioration resulting in stenosis or regurgitation (>50% of PAV overall fail within 10-15 years; the failure rate is nearly 100% in 5 years in those <35 years old but only 10% in 10 years in those >65). Two distinct processes-intrinsic calcification and noncalcific degradation of the ECM-account for structural valve deterioration. Calcification is a direct consequence of the inability of the nonviable cells of the GLUT-preserved tissue to maintain normally low intracellular calcium. Consequently, nucleation of calcium-phosphate crystals occurs at the phospholipid-rich membranes and their remnants. Collagen and elastin also calcify. Tissue valve mineralization has complex host, implant, and mechanical determinants. Noncalcific degradation in the absence of physiological repair mechanisms of the valvular structural matrix is increasingly being appreciated as a critical yet independent mechanism of valve deterioration. These degradation mechanisms are largely rationalized on the basis of the changes to natural valves when they are fabricated into a tissue valve (mentioned above), and the subsequent interactions with the physiologic environment that are induced following implantation. The "Holy Grail" is a nonobstructive, nonthrombogenic tissue valve which will last the lifetime of the patient (and potentially grow in maturing recipients). There is considerable activity in basic research, industrial development, and clinical investigation to improve tissue valves. Particularly exciting in concept, yet early in practice is tissue engineering, a technique in which an anatomically appropriate construct containing cells seeded on a resorbable scaffold is fabricated in vitro, then implanted. Remodeling in vivo, stimulated and guided by appropriate biological signals incorporated into the construct, is intended to recapitulate normal functional architecture.

Animals↗

Mechanisms of bioprosthetic heart valve failure: fatigue causes collagen denaturation and glycosaminoglycan loss.

Bioprosthetic heart valve (BPHV) degeneration, characterized by extracellular matrix deterioration, remodeling, and calcification, is an important clinical problem accounting for thousands of surgeries annually. Here we report for the first time, in a series of in vitro accelerated fatigue studies (5-500 million cycles) with glutaraldehyde fixed porcine aortic valve bioprostheses, that the mechanical function of cardiac valve cusps caused progressive damage to the molecular structure of type I collagen as assessed by Fourier transform IR spectroscopy (FTIR). The cyclic fatigue caused a progressive loss of helicity of the bioprosthetic cuspal collagen, which was evident from FTIR spectral changes in the amide I carbonyl stretching region. Furthermore, cardiac valve fatigue in these studies also led to loss of glycosaminoglycans (GAGs) from the cuspal extracellular matrix. The GAG levels in glutaraldehyde crosslinked porcine aortic valve cusps were 65.2 +/- 8.66 microg uronic acid/10 mg of dry weight for control and 7.91 +/- 1.1 microg uronic acid/10 mg of dry weight for 10-300 million cycled cusps. Together, these molecular changes contribute to a significant gradual decrease in cuspal bending strength as documented in a biomechanical bending assay measuring three point deformation. We conclude that fatigue-induced damage to type I collagen and loss of GAGs are major contributing factors to material degeneration in bioprosthetic cardiac valve deterioration.

Animals↗

Elastin calcification and its prevention with aluminum chloride pretreatment.

Elastin, an abundant structural protein present in the arterial wall, is prone to calcification in a number of disease processes including porcine bioprosthetic heart valve calcification and atherosclerosis. The mechanisms of elastin calcification are not completely elucidated. In the present work, we demonstrated calcification of purified elastin in rat subdermal implants (Ca(2+) = 89.73 +/- 9.84 microgram/mg after 21 days versus control, unimplanted Ca(2+) = 0.16 +/- 0.04 microgram/mg). X-ray diffraction analysis along with resolution enhanced FTIR spectroscopy demonstrated the mineral phase to be a poorly crystalline hydroxyapatite. We investigated the time course of calcification, the effect of glutaraldehyde crosslinking on calcification, and mechanisms of inhibition of elastin calcification by pretreatment with aluminum chloride (AlCl(3)). Glutaraldehyde pretreatment did not affect calcification (Ca(2+) = 89.06 +/- 17.93 microgram/mg for glutaraldehyde crosslinked elastin versus Ca(2+) = 89.73 +/- 9.84 microgram/mg for uncrosslinked elastin). This may be explained by radioactive ((3)H) glutaraldehyde studies showing very low reactivity between glutaraldehyde and elastin. Our results further demonstrated that AlCl(3) pretreatment of elastin led to complete inhibition of elastin calcification using 21-day rat subdermal implants, irrespective of glutaraldehyde crosslinking (Ca(2+) = 0.73-2.15 microgram/mg for AlCl(3) pretreated elastin versus 89.73 +/- 9.84 for untreated elastin). The AlCl(3) pretreatment caused irreversible binding of aluminum ions to elastin, as assessed by atomic emission spectroscopy. Moreover, aluminum ion binding altered the spatial configuration of elastin as shown by circular dichroism (CD), Fourier transform infrared (FTIR), and (13)C nuclear magnetic resonance (NMR) spectroscopy studies, suggesting a net structural change including a reduction in the extent of beta sheet structures and an increase in coil-turn conformations. Thus, it is concluded that purified elastin calcifies in rat subdermal implants, and that the AlCl(3)-pretreated elastin completely resists calcification due to irreversible aluminum ion binding and subsequent structural alterations caused by AlCl(3).

Aluminum Chloride↗

Identification and characterization of calcifying valve cells from human and canine aortic valves.

BACKGROUND AND AIM OF THE STUDY: Cardiac valve calcification is the predominant pathology in patients needing valve replacement. The aim of this study was to determine if aortic valve cells calcify spontaneously and, if so, to characterize the nodular complex and response to growth factors. METHODS: Aortic valves were obtained from humans undergoing surgical valve replacement, and from female dogs. The valvular endothelium was removed and explants cultured in medium. RESULTS: A population of valvular interstitial cells spontaneously formed distinct calcified nodules containing hydroxyapatite within two to three weeks in canine and within six weeks in human aortic valves. The nodules contained an inner ring of dead cells surrounded by an outer ring of living cells. Cells associated with nodules had osteoblast-like characteristics and stained positively for extracellular bone matrix proteins. Incubating canine cells with potential calcifying stimuli tested the stimulus for calcification. The rate of nodule formation was increased with transforming growth factor beta-1 (+25 nodules), 25-hydroxycholesterol (+9 nodules) and bone morphogenetic protein 2 (+4 nodules) as compared with vehicle control (+3 nodules) over 25 days. CONCLUSIONS: We identified a population of valvular interstitial cells with osteoblast-like characteristics that spontaneously form calcific nodules in cell culture. In addition, the rate of calcific nodule formation was increased with transforming growth factor beta-1 and 25-hydroxycholesterol. Further study of these 'calcifying valve cells' may yield a new in vitro model for testing therapy aimed at preventing calcific valve stenosis.

Animals↗

Arterial uptake of biodegradable nanoparticles for intravascular local drug delivery: results with an acute dog model.

Biodegradable nanoparticles (NP) with a spherical diameter ranging from 70 to 160 nm were investigated for potential usefulness for the local intraluminal therapy of restenosis, the disease process responsible for arterial reobstruction following angioplasty. NPs containing a water-insoluble anti-proliferative agent U-86983 (U-86, Pharmacia and Upjohn, Kalamazoo, MI) were formulated from oil-water emulsions using biodegradable polymers such as poly(lactic acid-co-glycolic acid) (PLGA), and specific additives after particle formation, to enhance arterial retention using either heparin, didodecylmethylammonium bromide (DMAB), or fibrinogen, or combinations. Femoral and carotid arteries of male mongrel dogs were isolated in situ, and were then subjected to a balloon angioplasty. A NP suspension of a predetermined concentration was then infused into the artery for various durations. This was followed by a 30 min restoration of blood flow through the vessel. The arterial segments were excised and analyzed for drug levels. From the drug loading the NP and the drug levels in the artery, the quantity of nanoparticles retained was calculated and expressed as microgram per 10 mg dry arteries. In general, repeated short infusions of nanoparticle suspension (15 s x 4) were two-fold more effective in terms of higher arterial U-86 levels than a single prolonged infusion (60 s). A single 15 s infusion was not significantly different than a 60 s compared to non-modified NPs (39.2 +/- 2.5 and 49.1 +/- 2.4 vs. 21.5 +/- 0.6 micrograms/10 mg mean +/- s.e., respectively). A comparably enhanced NP uptake was noted with a combined heparin/DMAB modification. Increasing the concentration of NP in infusate from 5 to 30 mg ml-1 significantly increased arterial NP uptake level (from 22.5 +/- 3.5 to 83.7 +/- 1.4 micrograms/10 mg). Thus, the results support the view that modified nanoparticles along with optimized infusion conditions could enhance arterial wall drug concentrations of agents to treat restenosis.

Angioplasty, Balloon↗

Prevention of calcification of glutaraldehyde-crosslinked porcine aortic cusps by ethanol preincubation: mechanistic studies of protein structure and water-biomaterial relationships.

Clinical usage of bioprosthetic heart valves (BPHVs) fabricated from glutaraldehyde-pretreated porcine aortic valves is restricted due to calcification-related failure. We previously reported a highly efficacious ethanol pretreatment of BPHVs for the prevention of cuspal calcification. The aim of the present study is to extend our understanding of the material changes brought about by ethanol and the relationship of these material effects to the ethanol pretreatment anticalcification mechanism. Glutaraldehyde-crosslinked porcine aortic valve cusps (control and ethanol-pretreated) were studied for the effects of ethanol on tissue water content and for spin-lattice relaxation times (T1) using solid state proton NMR. Cusp samples were studied for protein conformational changes due to ethanol by ATR-FTIR spectroscopy. The changes in cuspal tissue-cholesterol (in vitro) interactions also were studied. Cusp material stability was assessed in terms of residual glutaraldehyde content and collagenase degradation. Water content of the cusp samples was decreased significantly due to ethanol pretreatment. The cuspal collagen conformational changes (per infrared spectroscopy) brought about by ethanol pretreatment were persistent even after rat subdermal implantation of cusp samples for 7 days. In vitro cholesterol uptake by cusps was greatly reduced as a result of ethanol pretreatment. Ethanol pretreatment of cusps also resulted in increased resistance to collagenase digestion. Cuspal glutaraldehyde content was not changed by ethanol pretreatment. We conclude that ethanol pretreatment of bioprosthetic heart valve cusps causes multi-component effects on the tissue/material and macromolecular characteristics, which partly may explain the ethanol-pretreatment anticalcification mechanism.

Animals↗

Inhibition of aortic wall calcification in bioprosthetic heart valves by ethanol pretreatment: biochemical and biophysical mechanisms.

The effectiveness of ethanol pretreatment on preventing calcification of glutaraldehyde-fixed porcine aortic bioprosthetic heart valve (BPHV) cusps was previously demonstrated, and the mechanism of action of ethanol was attributed in part to both lipid removal and a specific collagen conformational change. In the present work, the effect of ethanol pretreatment on BPHV aortic wall calcification was investigated using both rat subdermal and sheep circulatory implants. Ethanol pretreatment significantly inhibited calcification of BPHV aortic wall, but with less than complete inhibition. The maximum inhibition of calcification of BPHV aortic wall was achieved using an 80% ethanol pretreatment; calcium levels were 71.80+/-8.45 microg/mg with 80% ethanol pretreatment compared to the control calcium level of 129.90+/-7.24 microg/mg (p = 0.001). Increasing the duration of ethanol exposure did not significantly improve the inhibitory effect of ethanol on aortic wall calcification. In the sheep circulatory implants, ethanol pretreatment partly prevented BPHV aortic wall calcification with a calcium level of 28.02+/-4.42 microg/mg compared to the control calcium level of 56.35+/-6.14 microg/mg (p = 0.004). Infrared spectroscopy (ATR-FTIR) studies of ethanol-pretreated BPHV aortic wall (vs. control) demonstrated a significant change in protein structure due to ethanol pretreatment. The water content of the aortic wall tissue and the spin-lattice relaxation times (T1) as assessed by proton nuclear magnetic resonance spectroscopy did not change significantly owing to ethanol pretreatment. The optimum condition of 80% ethanol pretreatment almost completely extracted both phospholipids and cholesterol from the aortic wall; despite this, significant calcification occurred. In conclusion, these results clearly demonstrate that ethanol pretreatment is significantly but only partially effective for inhibition of calcification of BPHV aortic wall and this effect may be due in part to lipid extraction and protein structure changes caused by ethanol. It is hypothesized that ethanol pretreatment may be of benefit for preventing bioprosthetic aortic wall calcification only in synergistic combination with another agent.

Animals↗

Arterial uptake of biodegradable nanoparticles: effect of surface modifications.

Restenosis is the reobstruction of an artery following interventional procedures such as balloon angioplasty or stenting. Local pharmacotherapeutic approaches using controlled release systems are under investigation to inhibit the regional pathophysiologic process of restenosis. We have been investigating biodegradable nanoparticles (100 +/- 39 nm in diameter, mean +/- sd) for the local intra-arterial drug delivery. The purpose of this study was to investigate nanoparticle surface modifications (see Table 1) to enhance their arterial uptake. The PLGA (polylactic polyglycolic acid copolymer) nanoparticles were formulated by an oil-in-water emulsion solvent evaporation technique using a 2-aminochromone (U-86983, Upjohn and Pharmacia) (U-86) as a model antiproliferative agent. The various formulations of nanoparticles were evaluated for the arterial wall uptake by using an ex-vivo dog femoral artery model. The selected formulations were then tested in vivo in acute dog femoral artery and pig coronary artery models. The nanoparticles surface modified with a cationic compound, didodecyldimethylammonium bromide (DMAB), demonstrated 7-10-fold greater arterial U-86 levels compared to the unmodified nanoparticles in different ex-vivo and in-vivo studies. The mean U-86 levels were 10.7 +/- 1.7 microg/10 mg (dog) and 6.6 +/- 0.6 microg/10 mg (pig) in the artery segments ( approximately 2 cm) which were infused with the nanoparticles. The pig coronary studies further demonstrated that the infusion of nanoparticles with higher U-86 loading reduced the arterial U-86 levels, whereas increasing the nanoparticle concentration in the infusion solutions increased the arterial U-86 levels. The biodistribution studies in pigs following coronary arterial administration of nanoparticles demonstrated disposition of U-86 in the myocardium and distally in the liver and the lung. The mechanism of enhanced arterial uptake of the DMAB surface modified nanoparticles seems to be due to the alteration in the nanoparticle surface charge. The unmodified nanoparticles had a zeta potential of -27.8 +/- 0.5 mV (mean +/- sem, n = 5), whereas the DMAB modified nanoparticles demonstrated a zeta potential of +22.1 +/- 3.2 mV (mean +/- sem, n = 5). The adsorption of DMAB to the nanoparticle surface followed the Freundlich isotherm with binding capacity k = 28.1 microg/mg and affinity constant p = 2. 33. In conclusion, surface modified nanoparticles have potential applications for intra-arterial drug delivery to localize therapeutic agents in the arterial wall to inhibit restenosis.

Animals↗