Biomedical subjects

R K Strong

Publications and source records attributed to R K Strong.

25 records · Page 2Linked to original sources

PubMed1991

Three-dimensional structure of murine anti-p-azophenylarsonate Fab 36-71. 1. X-ray crystallography, site-directed mutagenesis, and modeling of the complex with hapten.

The structure of the antigen-binding fragment (Fab) of an anti-p-azophenylarsonate monoclonal antibody, 36-71, bearing a major cross-reactive idiotype of A/J mice has been refined to an R factor of 24.8% at a resolution of 1.85 A. The previously solved partial structure of this Fab at a resolution of 2.9 A (Rose et al., 1990) was used as an initial model for refinement against the high-resolution data. The complex with hapten has been modeled by docking the small-molecule crystal structure of phenylarsonic acid into the structure of the native Fab on the basis of a low-resolution electron density map of the complex. In this model, residue Arg-96 in the light chain and residues Asn-35, Trp-47, and Ser-99 in the heavy chain contact the arsonate moiety of the hapten; an additional bond is found between the arsonate group and a tightly bound water molecule. The phenyl moiety of the hapten packs against two tyrosine side chains at positions 50 and 106 in the heavy chain. Residue Arg-96 in the light chain had been implicated as involved in hapten binding on the basis of previous experiments, and indeed, this residue appears to play a crucial role in this model. Experiments employing site-directed mutagenesis directly support this conclusion. The heavy-chain complementarity-determining regions have novel conformations not previously observed in immunoglobulins except for the recently solved anti-p-azophenylarsonate Fab R 19.9 (Lascombe et al., 1989).

Amino Acid Sequence↗

PubMed1991

Three-dimensional structure of murine anti-p-azophenylarsonate Fab 36-71. 2. Structural basis of hapten binding and idiotypy.

Comparison between the structures and solvent-accessible surfaces of the antigen-binding fragments of two murine anti-p-azophenylarsonate monoclonal antibodies, one bearing a major cross-reactive idiotype of A/J strain mice (36-71) and one lacking the idiotype (R19.9; Lascombe et al., 1989), highlight the structural basis for the determination of hapten affinity and idiotypy. Since the sequence of R 19.9 is identical with the germline-encoded sequence at 16 positions in both heavy-chain and light-chain variable regions where somatic mutations and junctional differences have occurred to produce the 36-71 sequence, the structure of R 19.9 can be used to model the structure of the germline-encoded antibody (36-65) in the regions around these sites. These 16 sequence differences exclude the third heavy-chain complementarity-determining region because R 19.9 utilizes a D gene segment not associated with the predominant idiotype, which is 4 residues longer than the canonical D gene segment utilized in the sequences of 36-71 and 36-65. This difference between the structures of R 19.9 and 36-71 does not affect the validity of using the structure of R 19.9 to model the structure of 36-65 since the third heavy-chain complementarity-determining region is highly solvent-exposed in both 36-71 and R 19.9, and does not interact with any of these 16 sites. Comparing the structures of 36-71 and R 19.9 suggests that only three of the differences in the heavy-chain sequences, and three of the differences in the light-chain sequences of 36-71 and 36-65, increase the affinity for hapten.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗

PubMed1990

Crystal structure of the antigen-binding fragment of the murine anti-arsonate monoclonal antibody 36-71 at 2.9-A resolution.

The structure of the antigen-binding fragment (Fab) of an anti-phenylarsonate monoclonal antibody (36-71) bearing a major crossreacting idiotype of A/J mice has been solved and refined to an R factor of 19.3% at a resolution of 2.9 A. An initial electron density map was obtained with phase information from a total of six isomorphous heavy-atom derivatives (from two different compounds) and a molecular replacement solution using the HED10 Fab crystal structure as a model. The structure of the McPC603 Fab was used to provide an initial set of atomic coordinates. The electron density maps are clear and easily interpretable for the entire sequence except for sections from two of the heavy-chain complementarity-determining regions totaling 21 residues. These residues have been left out of the refinement and are not represented in our current model. The antigen-combining site was located by means of a difference Fourier synthesis with one of the heavy-atom derivatives, which contained arsanilic acid. It lies in a small pocket formed by residues from the hypervariable regions of both the heavy and the light chains. Interactions with the hapten from framework residues are also possible.

Amino Acid Sequence↗

PubMed1990

Proteolytic dissection of Sindbis virus core protein.

Mild trypsin treatment of the Sindbis virus nucleocapsid protein yields a fragment with a molecular mass of approximately 18.5 kilodaltons with its N terminus at residue 105. The fragment, which is stable to further digestion, appears by gel exclusion chromatography to be monomeric. These data are consistent with a model for the alphavirus core proteins, consisting of an extended and flexible N-terminal arm (residues 1 to 103) and a compactly folded C-terminal domain (residues 104 to 274), as previously suggested on the basis of sequence characteristics.

Capsid↗

PubMed1985

The structure of manganese superoxide dismutase from Thermus thermophilus HB8 at 2.4-A resolution.

An atomic model of tetrameric manganese superoxide dismutase from Thermus thermophilus HB8 has been built into an electron density map at 2.4 A resolution, using chemical sequences of Mn dismutases from Thermus aquaticus and Bacillus stearothermophilus. The monomer fold is structurally very similar to the fold of iron dismutase and comprises two domains, each contributing two ligands to the metal. The Mn(III) ion is bound by protein ligands assigned as His 28, His 83, Asp 165, and His 169. Near neighbors in the metal-ligand environment include a series of hydrophobic residues, Phe 86, Trp 87, Trp 131, and Trp 167. The hydroxyl groups of two Tyr residues, at 36 and 182, are less than 7 A from the metal, as is His 32. Gln 150 forms a bridge between Tyr 36 and Trp 131. These ligands and nearby residues are strongly conserved in the known sequences of Mn dismutases. Only one of the two oxygens of Asp 165 has been assigned as a metal ligand, so that in the current model four protein atoms bind Mn(III). These ligand atoms form part of an approximate trigonal bipyramid in which water may occupy an axial position on the side opposite His 28. The conformation of the protein is unusual in the vicinity of the first ligand, His 28, as a consequence of the insertion of an extra residue in an alpha-helix. The distortion of the helix allows His 32 to stack against the ligand, His 169, and brings Tyr 36 close to the Mn ion. Across one of the dimer interfaces, the two Mn ions are separated by about 18 A, and active center residues from adjoining subunits interdigitate; Tyr 172 interacts with His 32 of the neighboring chain and Glu 168 with the backbone of 168 and with the ligand His 169 from the opposite subunit. Only one other dimer interface occurs in the tetramer; it involves residues 55-62 and sequences near 140 and 156. The center of the oligomeric molecule is filled with solvent.

Amino Acid Sequence↗

PubMed1984

Manganese and iron superoxide dismutases are structural homologs.

The crystal structure of a tetrameric manganese superoxide dismutase from a thermophilic bacterium, Thermus thermophilus HB8, has been determined at 4.4-A resolution by local averaging of electron density maps calculated by isomorphous replacement. The spatial arrangement of the principal secondary structural features of iron superoxide dismutase is conserved in manganese dismutase. The structural homology is displayed by orienting the polypeptide chain of Escherichia coli Fe dismutase in the electron density map of Mn dismutase. Densities corresponding to bound Mn3+ occur at locations equivalent to the Fe3+ positions in iron dismutase, indicating one metal binding site per chain, or four sites per tetramer. The Mn tetramer, with 222 symmetry, is approximately rectangular in shape and appears to be constructed with only two unique interfaces. One set of interchain contacts closely resembles the dimer interface of Fe dismutase, but the other interface utilizes an inserted polypeptide segment that has no equivalent in Fe dismutase.

Crystallization↗

PubMedDate not supplied

Interactions of human NKG2D with its ligands MICA, MICB, and homologs of the mouse RAE-1 protein family.

NKG2D is an activating receptor that is expressed on most natural killer (NK) cells, CD8 alphabeta T cells, and gammadelta T cells. Among its ligands is the distant major histocompatibility complex class I homolog MICA, which has no function in antigen presentation but is induced by cellular stress. To extend previous functional evidence, the NKG2D-MICA interaction was studied in isolation. NKG2D homodimers formed stable complexes with monomeric MICA in solution, demonstrating that no other components were required to facilitate this interaction. MICA glycosylation was not essential but enhanced complex formation. Soluble NKG2D also bound to cell surface MICB, which has structural and functional properties similar to those of MICA. Moreover, NKG2D stably interacted with surface molecules encoded by three newly identified cDNA sequences (N2DL-1, -2, and -3), which are identical to the human ULBP proteins and may represent homologs of the mouse retinoic acid-early inducible family of NKG2D ligands. Because of the substantial sequence divergence among these molecules, these results indicated promiscuous modes of receptor binding. Comparison of allelic variants of MICA revealed large differences in NKG2D binding that were associated with a single amino acid substitution at position 129 in the alpha2 domain. Varying affinities of MICA alleles for NKG2D may affect thresholds of NK-cell triggering and T-cell modulation.

Amino Acid Sequence↗