Biomedical subjects

R Koncki

Publications and source records attributed to R Koncki.

8 recordsLinked to original sources

PubMed2001

Application of Prussian blue-based optical sensor in pharmaceutical analysis.

Optical flow-through cell-detector with incorporated transparent chemosensitive layer of Prussian blue has been applied in simple, single-channel flow-injection system for pharmaceutical analysis. The reductant analyte converts the Prussian blue based sensing layer to Prussian white form, and the attendant color change is used for sensing. Discoloration of the film is spectrophotometrically detected at 720 nm wavelength. The flow injection system has been successfully used for selective determination of ascorbic acid in simple and complex pharmaceuticals. The method is free from interferences caused by various ions and active ingredients commonly found in pharmaceuticals. The flow-through sensor is useful for spectrophotometric flow-injection analysis of intensively colored and turbid samples. The results of medicine analysis are comparable to those obtained using reference pharmacopeal method. The analytical system could be also used for determination of cysteine and hydrogen peroxide in medicines.

Ascorbic Acid↗

PubMed2001

Optical biosensors based on Prussian Blue films.

Optical biosensing schemes based on enzymatically modified inorganic/organic transparent films predominately composed of Prussian Blue are demonstrated. The composite film, which is non-electrochemically deposited on a non-conducting support. is used as an optical transducer for flow-through biosensors based on hydrolases and oxidases. Urease and glucose oxidase are utilized as model enzymes. Action of the urea biosensor is based on optical pH sensitivity of Prussian Blue indicator. The glucose biosensor is acting as first-generation optical biosensor based on in situ generated Prussian White transducer for hydrogen peroxide. These simple, single-pass transmission optical biosensors exhibit sensitivity in the millimolar range of concentration. The biosensors are very stable owing to presence of a poly(pyrrolylbenzoic acid) network in the composite material. This organic polymer plays a dual role as a binding agent for inorganic material and as a functionalized support for strong covalent immobilization of enzyme molecules.

Journal Article↗

PubMed2001

Spectrophotometric bioanalytical flow-injection system for control of hemodialysis treatment.

A spectrophotometric flow-injection analysis (FIA) system for monitoring clinical hemodialysis is demonstrated. The role of a dialysate urea detector incorporated in this bioanalytical system is played by an optical flow-through biosensor based on Prussian Blue film with chemically linked urease forming a monomolecular layer of the enzyme. This pH-enzyme optode-FIA system is useful for the selective determination of post-dialysate urea in the range of concentration corresponding to its level in real clinical samples (2-16 mmol l(-1)). This bioanalytical system allows the analysis of about 15 samples of spent dialysate per hour. The operational and storage stabilities of the applied biosensor are longer than 2 weeks and 2 months, respectively. Clinical evaluation of the bioanalytical system was performed.

Biosensing Techniques↗

PubMed2000

Screen-printed copper ion-selective electrodes.

A simple, low-cost and reproducible method for the mass production of potentiometric ion-selective electrodes for copper ions is presented. These planar, strip sensors were obtained by screen-printing. The application of pastes cured at low temperature allows printing of the sensors on low-cost, plastic substrates. The pastes for printing of ion-sensitive thick-film membranes were based on copper (1) and copper (II) sulfides. The analytical characteristics of the thick-film electrodes were compared. The analytical properties (range of determination, sensitivity, selectivity, response time) of the copper (I) sulfide-based sensors were comparable with those for conventional ion-selective electrodes.

Journal Article↗

PubMed1999

Composite films of Prussian blue and N-substituted polypyrroles: covalent immobilization of enzymes and application to near infrared optical biosensing.

We demonstrate the feasibility of optical biosensing using a material which, in essence, is a modified inorganic film to which various enzymes were covalently attached. Thin and transparent blue films composed of Prussian blue and incorporated into a network of N-substituted polypyrroles are sensitive to pH in the 5-9 range at 720 nm wavelength and can be modified with enzymes to result in the respective biosensors. Several methods of enzyme immobilization, using bifunctional crosslinking reagents, and various enzymes were tested. The best results were obtained using the one-step carbodiimide method which resulted in highly active, stable and transparent biosensor films for optical determination of urea and acetylcholine. The operational stability exceeded 1 month and even after 2 months of dry storage at room temperature the activity did not drop. The biosensors allow optical determination of the respective substrates in the millimolar concentration range.

Acetylcholinesterase↗

PubMed1999

Enzymatically modified ion-selective electrodes for flow injection analysis.

The application of potentiometric biosensors based on membrane ion-selective electrodes for flow injection analysis (FIA) is presented. The biosensors have been obtained by covalent binding of enzyme molecules directly to surface of ion-selective membranes. The biosensor/FIA systems enable the determination of urea and penicillin in the millimolar ranges of concentration. About 30 samples per hour can be analysed in the performed FIA systems. The operational stability of the bioanalytical systems exceeds 1 month.

Biosensing Techniques↗

PubMed1999

Urea determination using pH-enzyme electrode.

A pH-membrane electrode with n-tridodecylamine (TDDA) as the hydrogen-ion-selective ionophore was used for the construction of a potentiometric biosensor for urea determination. The electrode was enzymatically modified by covalent binding of urease molecules directly to the surface of the potentiometric membrane. Incorporation of the urea biosensor into simple double-channel flow injection analysis (FIA) system allows reproducible urea determination in a millimolar range of concentration. The utility and limitations of the presented biosensor-FIA system for analysis of various real samples has been investigated. The system can be useful for some biomedical and pharmaceutical applications such as analyses of urine, posthaemodialysis fluid and extracts from pharmaceutical ointments containing urea.

Biosensing Techniques↗

PubMed1995

Enzyme biosensor for urea based on a novel pH bulk optode membrane.

A new, absorbance-based enzymatic biosensor membrane for determination of urea is described. A lipophilic, fully LED- and diode laser-compatible pH sensitive dye was incorporated into a plasticized, carboxylated poly(vinyl chloride) membrane and served as the optical transducer of the sensor. Urease was covalently linked to the surface of the pH bulk optode membrane to form a very thin cover. The resulting biosensor membrane allows rapid determination of urea over the 0.3 to 100 mM range. The reproducibility, stability, and effects of pH and buffer concentration on the response of sensor are reported. The preparation of the pH transducer and the immobilization of the enzyme are simple and may easily be adopted to other biosensor types.

Animals↗