PubMed Health⌕ Search

Biomedical subjects

R M Zucker

Publications and source records attributed to R M Zucker.

At least 19 recordsLinked to original sources
PubMed2001

Programmed cell death in extraocular muscle tendon/sclera precursors.

PURPOSE: This study was designed to examine the occurrence of natural cell death in the periocular mesenchyme of mouse embryos. METHODS: Vital staining with LysoTracker Red and Nile blue sulfate as well as terminal nick end labeling (TUNEL) were utilized to identify apoptotic cell death in whole and histologicaly sectioned gestational day 10.5 to 14 mouse embryos. Laser scanning confocal microscopy was used to provide a three dimensional representation of the cell death pattern. Immunohistochemical staining for neural crest and myoblast populations was utilized to indicate the cell population undergoing apoptosis. RESULTS: Programmed cell death was evident in the developing rectus muscle tendons/sclera on gestational days 11 through 12.5 (corresponding to the weeks 5-6 of human development). Although each of these peripheral periocular condensations has readily apparent amounts of apoptosis, the pattern of cell death varied among them. Cell death was most apparent in the superior rectus tendon primordium, while that for the lateral rectus had the least evidence of apoptosis. CONCLUSIONS: Although apoptosis was readily evident in the periocular mesenchyme in distinct regions located medial and distal to the developing rectus muscles, programmed cell death in these sites has not previously been reported. New imaging techniques coupled with stains that evidence apoptotic cell death have made it possible to define this tissue as a prominent region of programmed cell death. Although neuronal tissues, including particular regions of the developing eye, are well recognized as sites of programmed cell death, description of this phenomenon in the extraocular tendon/sclera precursors is novel.

Animals↗
PubMed2001

Evaluation of confocal microscopy system performance.

BACKGROUND: The confocal laser scanning microscope (CLSM) has been used by scientists to visualize three-dimensional (3D) biological samples. Although this system involves lasers, electronics, optics, and microscopes, there are few published tests that can be used to assess the performance of this equipment. Usually the CLSM is assessed by subjectively evaluating a biological/histological test slide for image quality. Although there is a use for the test slide, there are many other components in the CLSM that need to be assessed. It would be useful if tests existed that produced reference values for machine performance. The aim of this research was to develop quality assurance tests to ensure that the CLSM was stable while delivering reproducible intensity measurements with excellent image quality. METHODS: Our ultimate research objective was to quantify fluorescence using a CLSM. To achieve this goal, it is essential that the CLSM be stable while delivering known parameters of performance. Using Leica TCS-SP1 and TCS-4D systems, a number of tests have been devised to evaluate equipment performance. Tests measuring dichroic reflectivity, field illumination, lens performance, laser power output, spectral registration, axial resolution, laser stability, photomultiplier tube (PMT) reliability, and system noise were either incorporated from the literature or derived in our laboratory to measure performance. These tests are also applicable to other manufacturer's systems with minor modifications. RESULTS: A preliminary report from our laboratory has addressed a number of the QA issues necessary to achieve CLSM performance. This report extends our initial work on the evaluation of CLSM system performance. Tests that were described previously have been modified and new tests involved in laser stability and sensitivity are described. The QA tests on the CLSM measured laser power, PMT function, dichroic reflection, spectral registration, axial registration, system noise and sensitivity, lens performance, and laser stability. Laser power stability varied between 3% and 30% due to various factors, which may include incompatibility of the fiber-optic polarization with laser polarization, thermal instability of the acoustical optical transmission filter (AOTF), and laser noise. The sensitivity of the system was measured using a 10-microm Spherotech bead and the PMTs were assessed with the CV concept (image noise). The maximum sensitivity obtainable on our TCS-SP1 system measured on the 10-microm Spherotech beads was approximately 4% for 488 nm, 2.5% for 568 nm, 20% for 647 nm, and 19% for 365 nm laser light. The values serve as a comparison to test machine sensitivity from the same or different manufacturers. CONCLUSIONS: QA tests are described on the CLSM to assess performance and ensure that reproducing data are obtained. It is suggested strongly that these tests be used in place of a biological/histological sample to evaluate system performance. The tests are more specific and can recognize instrument functionality and problems better than a biological/histological sample. Utilization of this testing approach will eliminate the subjective assessment of the CLSM and may allow the data from different machines to be compared. These tests are essential if one is interested in making intensity measurements on experimental samples as well as obtaining the best signal detection and image resolution from a CLSM. Published 2001 Wiley-Liss, Inc.

Electric Power Supplies↗
PubMed2001

Statistical evaluation of confocal microscopy images.

BACKGROUND: The coefficient of variation (CV) is defined as the standard deviation (sigma) of the fluorescent intensity of a population of beads or pixels expressed as a proportion or percentage of the mean (mu) intensity (CV = sigma/mu). The field of flow cytometry has used the CV of a population of bead intensities to determine if the flow cytometer is aligned correctly and performing properly. In a similar manner, the analysis of CV has been applied to the confocal laser scanning microscope (CLSM) to determine machine performance and sensitivity. METHODS: Instead of measuring 10,000 beads using a flow cytometer and determining the CV of this distribution of intensities, thousands of pixels are measured from within one homogeneous Spherotech 10-microm bead. Similar to a typical flow cytometry population that consists of 10,000 beads, a CLSM scanned image consists of a distribution of pixel intensities representing a population of approximately 100,000 pixels. In order to perform this test properly, it is important to have a population of homogeneous particles. A biological particle usually has heterogeneous pixel intensities that correspond to the details in the biological image and thus shows more variability as a test particle. RESULTS: The bead CV consisting of a population of pixel intensities is dependent on a number of machine variables that include frame averaging, photomultiplier tube (PMT) voltage, PMT noise, and laser power. The relationship among these variables suggests that the machine should be operated with lower PMT values in order to generate superior image quality. If this cannot be achieved, frame averaging will be necessary to reduce the CV and improve image quality. There is more image noise at higher PMT settings, making it is necessary to average more frames to reduce the CV values and improve image quality. The sensitivity of a system is related to system noise, laser light efficiency, and proper system alignment. It is possible to compare different systems for system performance and sensitivity if the laser power is maintained at a constant value. Using this bead CV test, 1 mW of 488 nm laser light measured on the scan head yielded a CV value of 4% with a Leica TCS-SP1 (75-mW argon-krypton laser) and a CV value of 1.3% with a Zeiss 510 (25-mW argon laser). A biological particle shows the same relationship between laser power, averaging, PMT voltage, and CV as do the beads. However, because the biological particle has heterogeneous pixel intensities, there is more particle variability, which does not make as useful as a test particle. CONCLUSIONS: This CV analysis of a 10-microm Spherotech fluorescent bead can help determine the sensitivity in a confocal microscope and the system performance. The relationship among the factors that influence image quality is explained from a statistical endpoint. The data obtained from this test provides a systematic method of reducing noise and increasing image clarity. Many components of a CLSM, including laser power, laser stability, PMT functionality, and alignment, influence the CV and determine if the equipment is performing properly. Preliminary results have shown that the bead CV can be used to compare different confocal microscopy systems with regard to performance and sensitivity. The test appears to be analogous to CV tests made on the flow cytometer to assess instrument performance and sensitivity. Published 2001 Wiley-Liss, Inc.

Calibration↗
PubMed2001

Selective vulnerability of embryonic cell populations to ethanol-induced apoptosis: implications for alcohol-related birth defects and neurodevelopmental disorder.

BACKGROUND: Ethanol-induced cell death has been characterized in very few stages of embryogenesis. This investigation comprehensively maps patterns of both programmed and ethanol-induced cell death in the central nervous system and craniofacial region at 0.5-day intervals from gestational day (GD) 6.5 to 11 in mice. METHODS: A teratogenic dosage of ethanol (2.9 g/kg) or vehicle was administered via two intraperitoneal injections to pregnant C57BL/6J mice at various stages of gestation. Cell death patterns were characterized using Nile blue sulfate vital staining and histological analysis of plastic sections. Confocal laser scanning microscopy of LysoTracker Red-stained specimens allowed for three-dimensional visualization of areas of apoptosis and precise sectional imaging of mouse embryos. Apoptosis was also documented using a TUNEL technique on histological sections. RESULTS: Normal programmed cell death in control embryos was noted in the prechordal plate region at GD 8, the neuroepithelium of the fourth ventricle and anterior neuropore at GD 9, and within the ganglia of cranial nerves V, VII-VIII, IX, and X at GD 10. Acute maternal ethanol administration 12 hr before examination resulted in a dramatic increase in apoptosis within sites of programmed cell death in the embryo. Moreover, ethanol-exposed specimens exhibited stage-dependent excessive cell death in other distinct cell populations, particularly within the developing central nervous system. Ethanol-induced apoptosis was notable as follows: GD 7.5-neuroectoderm; GD 8-neural plate and primitive streak; GD 9-alar plate and presumptive neural crest of the rostral hindbrain, especially at the mesencephalon/rhombencephalon junction; GD 9.5-10-branchial arches and rhombomeres; and GD 11-diencephalon, basal ganglia, pons, and developing cerebellum. CONCLUSIONS: The results of this study revealed developmental stage-specific cell populations of the developing brain and craniofacial region that are vulnerable to ethanol-induced apoptosis and provide new insight relative to the genesis of alcohol-related birth defects.

Animals↗
PubMed2000

Cytogenetic studies of three triazine herbicides. I. In vitro studies.

Atrazine, simazine, and cyanazine are widely used pre-emergence and post-emergence triazine herbicides that have made their way into the potable water supply of many agricultural communities. Because of this and the prevalence of contradictory cytogenetic studies in the literature on atrazine, simazine, and cyanazine, a series of in vitro experiments was performed to investigate the ability of these three triazines to induce sister chromatid exchanges (SCEs) and chromosome aberrations (CAs) in human lymphocyte cultures. Our results showed that all three triazines failed to produce any significant increases in SCEs or CAs up to the limits of solubility [using 0.5% dimethyl sulfoxide (DMSO)]. Our results are discussed in light of contradictory results in the literature.

Atrazine↗
PubMed2000

Confocal laser scanning microscopy of rat follicle development.

This study used confocal laser scanning microscopy (CLSM) to study follicular development in millimeter pieces of rat ovary. To use this technology, it is essential to stain the tissue before laser excitation with the confocal microscope. Various fluorescent stains (Yo-Pro, Bo-Pro, LysoTracker Red, hydroethidine, ethidium bromide, and 7-aminoactinomycin-d) were applied either to fresh tissue or to tissue that had been fixed with glutaraldehyde or paraformaldehyde. After fixation and staining, the tissue was dehydrated with MEOH and cleared with benzyl alcohol/benzyl aldehyde. CLSM was then used with the appropriate laser excitation, dichroics, and bandpass filters to acquire images of oocytes contained in follicles. Analysis of the data revealed three principal findings. First, a rapid increase in oocyte size occurred in the preantral stages of follicle development. In the antral stage of follicle development, there was a rapid increase in follicle size without any substantial increase in oocyte size. Second, accompanying these changes in oocyte and follicle growth was a differential staining pattern in which the nucleus stained more than the cytoplasm in a young follicle, but stained less than the cytoplasm as the follicle enlarged into the late antral stage. Lastly, using CLSM, atretic follicles showed increased LysoTracker Red staining in the granulosa region of the antral follicle, suggestive of cell death.

Animals↗
PubMed1999

Practical confocal microscopy and the evaluation of system performance.

The laser scanning confocal microscope has enormous potential in many fields of biology. Currently there is a subjective nature in the assessment of a confocal microscope's performance by primarily evaluating the system with a specific test slide provided by the user's laboratory. To achieve better performance from the equipment, it is necessary to run a series of tests to ensure that the optical machine is functioning properly. We have devised these methods on the Leica TCS-SP and TCS-4D systems. Tests measuring field illumination, lens clarity, laser power output, dichroic functioning, spectral alignment, axial resolution, laser power stability, machine performance, and system noise were derived to test the Leica laser scanning confocal microscopy system. These tests should be applicable to other manufacturers' systems as well. The relationship between photomultiplier tube (PMT) voltage, laser power, and averaging using a 10-microm-diameter test bead has shown that the noise (coefficient of variation of bead intensity, CV) in an image increases as the PMT increases. Therefore increasing the PMT setting results in increased noise. For ideal image quality, it appears that it is better to decrease the PMT setting and increase laser power, as noise generated by high PMT settings will reduce the image quality far more than the bleaching caused by higher laser power. Averaging can be used to improve the image at high PMT values, provided the sample is not bleached by repeated passes of the laser.

Artifacts↗
PubMed1999

Apoptosis and morphology in mouse embryos by confocal laser scanning microscopy.

Confocal laser scanning microscopy combined with a vital stain was used to study apoptosis in organogenesis-stage mouse embryos. Apoptosis has previously been visualized in whole embryos using the vital dyes acridine orange, Nile blue sulfate, and neutral red. In the present study, mouse embryos were harvested on Gestation Day 9 and stained with the vital lysosomal dye LysoTracker Red. Following incubation in the stain, embryos were fixed overnight in 4% paraformaldehyde, dehydrated in a graded methanol series, and cleared in benzyl alcohol/benzyl benzoate. The resulting embryo is almost transparent and retains specific LysoTracker Red staining. To achieve optical sectioning through embryos, it was necessary to use low-power objectives. With this procedure, the entire embryo can be optically sectioned and reconstructed in three dimensions to reveal areas of dye staining. Our results demonstrate specific regions undergoing programmed cell death in normal development and increased LysoTracker staining in embryos exposed to hydroxyurea. This procedure allows for the optical imaging of whole Day 9 ( approximately 22 somites) embryos that were greater than 700 microm thick in the z axis and can be applied to studies involving neural tube formation or other aspects of organogenesis.

Aldehydes↗
PubMed1998

Confocal laser scanning microscopy of apoptosis in organogenesis-stage mouse embryos.

Confocal laser scanning microscopy combined with a vital stain has been used to study apoptosis in organogenesis-stage mouse embryos. In order to achieve optical sectioning through embryos, it was necessary to use low power objectives and to prepare the sample appropriately. Mouse embryos were harvested on gestation day 8 or 9 and stained with the vital lysosomal dye, LysoTracker Red. Following incubation in the stain, embryos were fixed in 2% paraformaldehyde overnight, dehydrated in a graded methanol series, and cleared in benzyl alcohol/benzyl benzoate. The resulting embryo is almost transparent and retains specific LysoTracker Red staining. The entire embryo can be optically sectioned and reconstructed in three dimensions to reveal areas of dye staining. To test this approach, the chemotherapeutic drug hydroxyurea was added to day 8 embryos in vitro to induce apoptosis. Our results demonstrated specific regions undergoing programmed cell death in normal development and increased apoptosis in embryos exposed to hydroxyurea. The observed patterns of LysoTracker Red staining correlate well with previous studies of cell death using other lysosomotropic dyes such as Nile blue sulfate, acridine orange, or neutral red. LysoTracker Red has the advantages of being aldehyde-fixable and highly fluorescent (bleaching was not observed even after multiple scans). This procedure allows for the optical imaging of whole day 9 (approximately 22 somites) embryos that were greater than 500 microns thick in the Z-axis.

Animals↗
PubMed1997

Nucleoside-mediated mitigation of 5-fluorouracil-induced toxicity in synchronized murine erythroleukemic cells.

5-Fluorouracil (5-FU) is a chemotherapeutic agent known to retard embryonic growth and induce cleft palate and limb deformities. The predominant mechanism underlying its toxic action is thought to be inhibition of thymidylate synthetase (TS), and hence thymidine triphosphate (dTTP) synthesis, resulting in alteration of the balance of deoxynucleotide (dNTP) pools and disruption of DNA synthesis. Indeed, previously we demonstrated retarded cell-cycle progression concurrent with a 60% decrease in TS activity in rat whole embryos following maternal exposure to 40 mg/kg 5-FU on Gestational Day 14 and in the murine erythroleukemic cell (MELC) suspension culture following exposure to 5-25 microM 5-FU for 2 hr. In the study described herein, we used high-performance liquid chromatography (HPLC) to demonstrate in both of these model systems that 5-FU exposure results in similar patterns of dNTP perturbations: a prolonged decrease in dTTP and dGTP levels and an increase in dCTP and dATP. In addition, we used centrifugal elutriation to synchronize MELC in the phases of the cell cycle (G0/G1 and early S) most sensitive to 5-FU to investigate the ability of nucleoside supplementation to mitigate 5-FU-induced toxicity. Our data indicate that following a 2-hr exposure to 5-25 microM 5-FU, supplementation with 1-10 microM thymidine (TdR) for 24 hr partially reverses 5-FU-induced toxicity as evidenced by increased cellular proliferation and cell-cycle progression and amelioration of 5-FU-induced perturbations of protein synthesis and cellular membrane permeability compared to unsupplemented 5-FU-exposed cells. However, TdR concentrations >/=100 microM inhibited growth or were cytotoxic. In comparison, supplementation with 10 microM-10 mM of deoxycytidine (CdR) was not toxic, but effected a dose-dependent recovery from 5-FU-induced toxicity. At 1-100 microM, neither deoxyadenosine nor deoxyguanosine supplementation reduced 5-FU-induced toxicity; at higher concentrations, both purine nucleotides inhibited cell growth. Although these results support the hypothesis that 5-FU disrupts the MELC cell cycle by depleting dTTP (a perturbation that is reversible by TdR supplementation), they also indicate that CdR supplementation offers an additional recovery pathway.

Animals↗
PubMed1995

Factors affecting flow cytometric detection of apoptotic nuclei by DNA analysis.

Apoptotic thymocyte nuclei normally appear on a flow cytometric DNA histogram as a subdiploid peak. We observed that addition of a specific RNase A preparation to the detergent-based lysing buffer increased the fluorescence of toxicant-induced apoptotic nuclei to the level of untreated diploid nuclei. The chelating agent EDTA partially inhibited the RNase effect, suggesting contaminating divalent cations may have been involved. Moreover, spectrofluorometric analysis revealed that addition of RNase or divalent cations decreased the amount of DNA present in the lysate. This suggested that the upscale fluorescence shift was due to a decrease in the ability of the lysing buffer to extract DNA, possibly as a result of cation-induced chromatin condensation, rather than increased accessibility of fluorochrome binding sites due to apoptotic degeneration. Moreover, during a 16-h culture, we observed a similar, but time-dependent, upscale shift in the fluorescence of thymocytes undergoing apoptosis either spontaneously or as a result of exposure to 1 microM tributyltin methoxide (TBT), 2% ethanol, 2% methanol, or 1 microM dexamethasone phosphate (DEX). This commonality of effect suggests that a similar magnitude of chromatin reorganization occurs in apoptotic cells in prolonged culture regardless of the method of apoptotic induction. These findings should alert investigators to potential inaccuracies in the flow cytometric quantitation of apoptosis in in vitro systems employing prolonged toxicant exposures or complex lysing cocktails that may contain active contaminants.

Animals↗
PubMed1995

Biological modeling of 5-fluorouracil developmental toxicity.

A biologically-based dose-response (BBDR) model is a mathematical description of the biological events leading to expression of a toxic response. As an alternative to current approaches in non-cancer risk assessment, such models will reduce uncertainty in that they will provide a more comprehensive description of toxicity. We are involved in construction of a BBDR model for the developmental toxicity of 5-fluorouracil (5-FU) in the rat using multiple approaches. First, to identify critical events in the pathogenesis of 5-FU developmental toxicity, thymidylate synthetase (TS) inhibition and alterations in cell kinetics and growth were examined in embryos following maternal administration of 5-FU on day 14 of gestation. A dose-related decline in TS activity was observed within 1 h; however, maximal inhibition and recovery were similar at 10, 20 and 40 mg/kg. Dose-dependent cell cycle alterations were observed within 4 h after exposure and were maximal at 8 h. Hindlimb growth reduction was observed 24 h after exposure to 40 mg/kg, but not at lower doses. At term hindlimb defects were observed at doses above 30 mg/kg. An integrated dose-response model for hindlimb defects was derived from empirical relationships among these events. The resultant dose-response somewhat over-predicted the developmental toxicity of 5-FU, although results of a Monte Carlo simulation indicated that these data were not incompatible with model predictions. Overall, the results suggest that TS inhibition is a key component of the mechanism of 5-FU developmental toxicology, but the model does not capture all of the critical events in the induction of hindlimb defects. A preliminary mechanistic model for the inhibition of embryonic TS, DNA synthesis and cell cycle following maternal exposure to 5-FU, independently derived from literature data to further examine the potential role of this pathway in its developmental toxicity, predicted a dose-response for TS inhibition and DNA synthesis that closely reflected the observed patterns. These results further suggest that TS inhibition, resultant deficits in DNA synthesis and cell cycle perturbations represent a critical mechanistic pathway in the developmental toxicity of 5-FU.

Animals↗
PubMed1995

Flow cytometric detection of abnormal fetal erythropoiesis: application to 5-fluorouracil-induced anemia.

We sought to determine whether flow cytometric analysis of circulating fetal blood cells could be used to rapidly detect perturbations of fetal erythropoiesis. In addition, we wanted to determine whether this approach would allow sample collection by exsanguination instead of fetal cardiac puncture, a difficult technique used to prevent contamination of samples with maternal erythrocytes. To monitor fetal erythropoiesis from gestational day (GD) 14-20, we analyzed the cell size, RNA content, and percentage of circulating liver-derived reticulocytes relative to yolk-sac-derived erythroblasts. As a model toxicant, we chose 5-fluorouracil (5-FU), since we previously observed that maternal administration at 20-40 mg/kg on gestational day (GD) 14 produced fetal anemia on GD 16-17, as evidenced by dose-dependent decreases in the cell counts, hematocrit, and hemoglobin content of fetal blood obtained by cardiac puncture. We report herein that 48 hr after maternal 5-FU administration, both cardiac and peripheral blood samples exhibited a dose-dependent decrease in the relative percentage of reticulocytes, indicating a reduced rate of reticulocyte release from the fetal liver. Moreover, at 30 and 40 mg/kg, reticulocytes exhibited increased size and reduced RNA content on GD 16, but elevated RNA content (indicative of premature release) by GD 18. These data suggest that 5-FU inhibits both erythroid cell proliferation and RNA synthesis reversibly, resulting in an anemia that triggers compensatory release of immature reticulocytes.(ABSTRACT TRUNCATED AT 250 WORDS)

Anemia↗
PubMed1995

Utility of fluorescence microscopy in embryonic/fetal topographical analysis.

For topographical analysis of developing embryos, investigators typically rely on scanning electron microscopy (SEM) to provide the surface detail not attainable with light microscopy. SEM is an expensive and time-consuming technique, however, and the preparation procedure may alter morphology and leave the specimen friable. We report that by using a high-resolution compound epifluorescence microscope with inexpensive low-power objectives and the fluorochrome acridine orange, we were able to obtain surface images of fixed or fresh whole rat embryos and fetal palates of considerably greater topographical detail than those obtained using routine light microscopy. Indeed the resulting high-resolution images afford not only superior qualitative documentation of morphological observations, but the capability for detailed morphometry via digitization and computer-assisted image analysis.

Animals↗
PubMed1995

Zinc deficiency causes apoptosis but not cell cycle alterations in organogenesis-stage rat embryos: effect of varying duration of deficiency.

Zinc deficiency is teratogenic in all species in which it has been examined. Zinc is an essential component of enzymes involved in DNA synthesis and cell proliferation, and may play an as yet undetermined role in apoptosis. To further our understanding of the role of zinc in normal development, we examined cell death and cell cycle parameters in embryos of pregnant rats fed a zinc-deficient diet for 2 to 10 days (0.5 microgram zinc/g diet; zinc-adequate diet was 25 micrograms zinc/g). To elucidate sensitive periods of development and susceptible cell populations, dams were fed the zinc-deficient diet from gestation day 1, 3, 7, or 9 and killed on day 11. Embryos were examined for morphology and developmental stage. From each litter, 2-3 embryos were stained with Nile blue sulfate (NBS) to visualize cell death, 3 embryos were frozen for flow cytometric cell cycle analysis and cell counts, and selected embryos were preserved for histological examination. Dams fed the zinc-deficient diet for more than 3 days reduced their food intake through gestation day 8 but increased food intake on day 9. Maternal plasma zinc dropped to 10-25% of control levels in the zinc-deficient groups. Zinc deficiency from gestation day 1 or 3 resulted in two categories of affected litters on day 11. One category had embryos which were morphologically normal but displayed extensive NBS staining in the visceral arches, neural tube, and somites. The second category had developmentally retarded or maldeveloped embryos which showed little NBS staining. Zinc deficiency from gestation day 7 produced cell death in the posterior dorsal midline in the area of premigratory neural crest cells, which was confirmed by histological examination. Zinc deficiency from gestation day 9 did not affect morphology or NBS staining. Percentages of cells in the G0/G1, S, and G2M phases of the cell cycle on gestation day 11, determined by flow cytometry, were similar to controls in all groups. This study shows that as few as 4 days of maternal zinc deficiency can produce excess embryonal cell death, and that neural crest cells may be particularly sensitive.

Animals↗
PubMed1994

Fetal anemia following maternal exposure to 5-fluorouracil in the rat.

Previous studies from our laboratory have shown that maternal 5-fluorouracil (5-FU) exposure on day 14 of gestation (GD14) in the rat results in dose-dependent retardation of both cell cycle progression and growth of embryonic liver. At this developmental stage, hepatic erythropoiesis is the primary source of new circulating fetal erythrocytes. This study examined dose-dependent hematological changes in the fetus after maternal 5-FU exposure (0, 20, 30, 40 mg/kg on GD14) to assess 1) hematopoiesis as a potential target for 5-FU developmental toxicity and 2) the role of the observed 5-FU-induced fetal anemia in adverse developmental outcome. Standard clinical hematological parameters, including hematocrit, hemoglobin content, and erythrocyte counts, were measured in fetal blood drawn by cardiac puncture. Dose-related deficits were observed in all of these parameters within 48 hr of 5-FU administration. Calculation of various red cell indices revealed a concomitant increase in mean cell volume and mean cell hemoglobin. These changes were preceded by depletion of hepatic precursor populations which was evident by 24 hr after maternal exposure to 30 or 40 mg/kg. At doses of 20 and 30 mg/kg there was full and moderate recovery, respectively, in these endpoints by 72 hr after dosing, but persistent deficits were observed at 40 mg/kg. Fluorescence microscopy of Höechst-stained fetal blood smears revealed that at both 48 and 72 hr after dosing, the proportion of nucleated yolk sac-derived erythrocytes was increased relative to control.(ABSTRACT TRUNCATED AT 250 WORDS)

Anemia↗