PubMed Health⌕ Search

Biomedical subjects

R N Lamb

Publications and source records attributed to R N Lamb.

4 recordsLinked to original sources

Structural-chemical evolution within exfoliated clays.

The exfoliated (delaminated) structures of lamellar clays offer potential as precursors for the formation of various nanostructured materials. In this article, Lucentite and Laponite phyllosilicate clays, which both have empirical formulas of Na(0.33)[Mg(2.67)Li(0.33)Si4O10(OH)2] but differ in nanodimensions, have been exfoliated. Experiments were carried out for mixtures containing approximately 1 wt % phyllosilicate in a 5% aqueous solution of poly(acrylic acid) at different temperatures. X-ray diffraction and photoemission spectroscopy measurements for the solid products recovered after stirring the mixtures at 20 degrees C showed that the fully extended chains of poly(acrylic acid) were intercalated within the interlayer spaces between the silicate plates of the clays. At 85 degrees C, however, the clays were exfoliated and/or partially exfoliated. Photoemission spectroscopy also indicated that the exfoliated structures primarily consisted of silica nanoplates. 29Si nuclear magnetic resonance and oxygen K-edge near-edge X-ray absorption fine structure indicated that the surfaces of the plates were terminated by high concentrations of the silanol (-SiOH) groups, which created structural branches during intercalation. A model was developed in which intercalation and the removal of ions from the clays after the poly(acrylic acid) interactions reduced the electrostatic van der Waals forces between the plates. It was also shown that the formation of branches created a steric effect that inhibited the stacking of the plates. Together these resulted in exfoliation.

Journal Article↗

Dispersion of organically modified clays within n-alcohols.

A method for formation of polymer-clay nanocomposites involves dispersion of the nanometer silicate layers of clays into a solvent, followed by dispersion into polymers. The dispersion of layered silicates within solvents affects the structure and properties of the nanocomposites. We report the dispersion of organically modified clays, used for formation of nanocomposites with organic polymers, within a range of alcohol solvents. Experiments involved stirring a mixture containing approximately 1 wt% of alkylammonium-modified clays in n-alcohols with general molecular structure RnOH, where n represents the number of carbons of alkyl chains, varying from 2 to 8. The clays precipitated from the dispersion when RnOH solvents with n<5 were used, however, they formed gels for solvents with n5. The increased dispersion was related to the decrease of polarity and hydrogen bonding force within solvents. X-ray diffraction for the dispersed clays indicated that the interlayer spaces (1.8 nm), formed by regular stacking of the silicate layers, expanded to a maximum of 3.0 nm after treatment with RnOH with n5. The interlayer expansion was due to the intercalation of n-alcohol molecules within the interlayer spaces. It is suggested that the alkyl chains of n-alcohols remain parallel to the silicate surface in the intercalate. Preliminary experiments on the influence of these alcohol solvents on the intercalation of polyol (polyether) are also reported.

Journal Article↗

Surface composition of silica particles embedded in an Australian bituminous coal.

The composition and structure of the surface layers of a series of silica particles (10-20 microns across), embedded in a bituminous coal from the Whybrow seam, Sydney Basin, Australia, have been characterized in situ using time-of-flight secondary ion mass spectrometry (TOFSIMS), ion imaging, and depth profiling. The silica particles investigated are typically encased in a multilayered shell, the composition of which differs from average composition of both the silica and the bulk coal. The analysis directly demonstrates the presence of a silanol-rich (Si-OH) interfacial layer 3 nm in thickness. This silanol-rich region separates the bulk silica and a complex non-silica layer encasing the particles. The interfacial region also shows significant lithium enrichment (approximately fivefold over bulk) which implies diffusion and precipitation of lithium-containing species during the authigenetic formation of the surface layers of the silica grains. The outer layer encasing the silica particles is 10 nm in thickness and is composed of clays and carbonates, and, in some cases, includes organic material. The elemental constituents of this layer include aluminium, sodium, potassium, magnesium, iron, and lesser amounts of titanium and copper. The variation in the aluminium concentration from the outermost surface to the deeper layers is less than that of other non-silica species. A relatively high amount of calcium is found associated with the silica bulk. Although only non-respirable-sized silica particles are examined in this work, the methods of analysis developed have potential in providing an insight into the surface composition of respirable particles and in further studies of the surface bioavailability of silica species.

Air Pollutants, Occupational↗