PubMed Health⌕ Search

Biomedical subjects

R Strang

Publications and source records attributed to R Strang.

At least 19 recordsLinked to original sources
PubMed2000

Biologically active recombinant human progastrin(6-80) contains a tightly bound calcium ion.

Evidence is accumulating that gastrin precursors may act as growth factors for the colonic mucosa in vivo. The aims of this study were to prepare recombinant human progastrin(6-80) and to investigate its structure and biological activities in vitro. Human progastrin(6-80) was expressed in Escherichia coli as a glutathione S-transferase fusion protein. After thrombin cleavage progastrin(6-80) was purified by reverse phase high pressure liquid chromatography and characterized by radioimmunoassay, amino acid sequencing, and mass spectrometry. Assays for metal ions by atomic emission spectroscopy revealed the presence of a single tightly bound calcium ion. Progastrin(6-80) at concentrations in the pm to nm range stimulated proliferation of the conditionally transformed mouse colon cell line YAMC. The observations that progastrin(6-80) did not bind to either the cholecystokinin (CCK)-A or the gastrin/CCK-B receptor expressed in COS cells and that antagonists selective for either receptor did not reverse the proliferative effects of progastrin(6-80) suggested that progastrin(6-80) stimulated proliferation independently of either the CCK-A or the gastrin/CCK-B receptor. We conclude that recombinant human progastrin(6-80) is biologically active and contains a single calcium ion. With the exception of the well known zinc-dependent polymerization of insulin and proinsulin, this is the first report of selective, high affinity binding of metal ions to a prohormone.

Amino Acid Sequence↗
PubMed2000

Preliminary investigation of a novel carbon dioxide laser for applications in dentistry.

BACKGROUND AND OBJECTIVE: A novel pulsed CO(2) laser was examined for its ability to ablate hard dental tissues. STUDY DESIGN/MATERIALS AND METHODS: Lased human enamel surfaces were viewed using light and scanning electron microscopy for evidence of adverse structural changes. In vitro shear bond strength tests were conducted on composite resin bonded to lased enamel surfaces and compared with conventionally prepared specimens. A thermal camera was used to monitor temperature changes during cavity preparation in tooth slabs to assess likely changes to the dental pulp. RESULTS: No charring or surface cracks were observed on lased enamel surfaces using both microscopic techniques. Bonding of the lased enamel surfaces to composite resin was not significantly different from the acid-etched control group. For cavities with a remaining dentine thickness of less than 1 mm, the temperature rise was less than 6 degrees C. CONCLUSION: A novel pulsed CO(2) laser shows promise for cutting cavities in teeth.

Acrylic Resins↗
PubMed2000

The effect of wavelength, bandwidth, and probe design and position on assessing the vitality of anterior teeth with laser Doppler flowmetry.

OBJECTIVES: To investigate the effect of four variables: wavelength (633 nm and 780 nm), bandwidth filter (3 kHz, 15 kHz, 22 kHz), probe fibre separation (250 microns) and 500 microns) and distance of the probe from the gingival margin (2-3 mm and 4-5 mm) when assessing the vitality of anterior teeth with a laser Doppler flowmetry system. DESIGN: Split-mouth cohort clinical trial. SETTING: Childrens dental clinic, Glasgow Dental Hospital and School. SAMPLE AND METHODS: Sample included 11 non-vital maxillary incisors with necrotic pulps in 10 patients (mean age 12.25 years old). Recordings were taken from the non-vital tooth and from a vital maxillary incisor from the same patient, using all 24 combinations of the recording variables listed above. The vital/non-vital ratios of the signals from the 11 pairs of teeth were calculated and discriminant analysis applied to the data. RESULTS: Of the variables investigated, the combination of a 633 nm laser source with a 3 kHz bandwidth filter using a probe with a 500 microns fibre separation placed 2-3 mm from the gingival margin was the most reliable, with 10 out of a possible 11 true positives for pulpal necrosis, no false positives, and one equivocal diagnosis, and was the only combination that recorded a smaller blood flow from the non-vital tooth compared with the vital control tooth for all 11 pairs of teeth investigated. CONCLUSIONS: It was concluded, therefore, that laser Doppler flowmetry can be of use in assessing the vitality of anterior teeth and that this is the preferred combination of recording variables for further investigations.

Adolescent↗
PubMed1999

The effect of saliva on enamel and dentine erosion.

The present study aims to assess the ability of saliva, both in vitro and in situ, to prevent surface mineral loss from enamel and dentine when exposed to an erosive challenge. Fifteen groups of four varnished thin tooth sections were stored in saliva collected from individuals taking part in the in situ study and a further eight groups, each containing four sections, were stored in deionised water. In vitro, sections were stored in saliva or water for 14 days. In addition, fifteen subjects each wore an appliance with four varnished sections. Appliances with sections were worn for 14 days. All sections were exposed to 25 ml of erosion solution for 5 min twice daily. Microradiography and image analysis of the recovered sections demonstrated significant protection of surface mineral loss from enamel and dentine by saliva in vitro and in situ compared with deionised water (p < 0.05). Significantly less mineral loss (p < 0.05) was observed for enamel and dentine stored in situ compared with storage in saliva in vitro. Generalised linear modelling demonstrated both the subject and protocol had significant effect on mineral loss. A weak positive correlation (r = 0.64) was noted when in situ and in vitro mineral loss from enamel were compared, demonstrating greater reactivity of the in vitro enamel specimens to the erosion challenge. The dentine data did not show any linear correlation. Saliva protected against mineral loss by erosion and, for enamel, in vitro results demonstrated a weak positive correlation with in situ results.

Dental Enamel↗
PubMed1999

Dental materials: 1997 literature review.

This review of the published literature on dental materials for the year 1997 has been compiled by the Dental Materials Panel of UK. It continues a series of annual reviews started in 1973. Emphasis has been placed upon publications, which report upon the materials science or clinical performance of the materials. The review has been divided by accepted materials classifications (fissure sealants, glass polyalkenoate cements, dentine bonding, dental amalgam, endodontic materials, casting alloys, ceramometallic restorations and resin-bonded bridges, ceramics, denture base resins and soft lining materials, impression materials, dental implant materials, orthodontic materials, biomechanics and image processing, resin composites, and casting investment materials and waxes). Three hundred and thirty three articles have been reviewed.

Dental Materials↗
PubMed1999

A comparison of laser Doppler flowmetry with other methods of assessing the vitality of traumatised anterior teeth.

Laser Doppler flowmetry is a non-invasive electrooptical technique which allows the semi-quantitative recording of pulpal blood flow. This study aimed to determine the reliability (measured as the sensitivity and specificity) of laser Doppler flowmetry as a method of assessing the vitality of traumatised anterior teeth, and to compare it with standard pulpal diagnostic tests. Recordings of pulpal blood flow were taken from 67 non-vital anterior teeth (55 patients), where the pulpal status was confirmed by pulpectomy. For comparison, recordings were also taken from 84 vital anterior teeth (84 patients). Analysis of the recordings allowed diagnostic criteria to be developed which gave the technique a sensitivity and specificity of 1.0 for this sample. None of the other standard pulpal diagnostic methods tested was as reliable. This was usually due to low sensitivities, which ranged between 0.92 for sensibility testing with ethyl chloride down to 0.36 for periapical radiolucency and 0.16 for a history of pain. Laser Doppler flowmetry was found to be a reliable method of assessing the pulpal status of traumatised anterior teeth, although it is technique-sensitive and time-consuming to use.

Adolescent↗
PubMed1998

Dental materials: 1996 literature review.

This critical review of the published literature on dental materials for the year 1996 has been compiled by the Dental Materials Panel of the UK. It continues the series of annual reviews started in 1973 and published in the Journal of Dentistry. Emphasis has been placed upon publications which report upon the materials science or clinical performance of the materials. The review has been divided by accepted materials classifications (fissure sealants, glass polyalkenoate cements, dentine bonding, dental amalgam, endodontic materials, casting alloys, resin-bonded bridges and ceramo-metallic restorations, ceramics, denture base resins and soft lining materials, impression materials, implants materials, orthodontic materials, biomechanics and image processing, resin composites and casting investment materials and waxes). Three hundred and thirteen articles have been reviewed.

Dental Alloys↗
PubMed1998

Dental materials: 1996 literature review. Part 2.

This critical review of the published literature on dental materials for the year 1996 has been compiled by the Dental Materials Panel of the UK. It continues the series of annual reviews started in 1973 and published in the Journal of Dentistry. Emphasis has been placed upon publications which report upon the materials science or clinical performance of the materials. The review has been divided by accepted materials classifications (fissure sealants, glass polyalkenoate cements, dentine bonding, dental amalgam, endodontic materials, casting alloys, resin-bonded bridges and ceramo-metallic restorations, ceramics, denture base resins and soft lining materials, impression materials, implants materials, orthodontic materials, biomechanics and image processing, resin composites and casting investment materials and waxes). Three hundred and thirteen articles have been reviewed.

Ceramics↗
PubMed1997

Determination of plaque pH changes within the trough of an in situ appliance used to study mineral changes in early carious lesions.

Plaque pH was measured using a glass combination pH microelectrode of plaque deposits lining the trough of an intra-oral appliance which contained single sections of human teeth with artificial enamel lesions. Plaque exposure to a 10% sucrose solution produced significantly lower plaque pH levels than a solution of sorbitol gum extract. The subsequent flow of saliva over the plaque/pH electrode interface resulted in a significant and rapid increase in pH. Repeat experiments, using deionised water instead of saliva, demonstrated no increase in pH at the plaque/electrode interface. This system may provide a convenient method of producing plaque suitable for repeated pH analysis in intimate association with artificial enamel lesions. This may permit further study of the relationship between plaque acidogenicity, salivary buffering capacity and mineral change within the incipient enamel lesion.

Adult↗
PubMed1997

Application of transverse microradiography for measurement of mineral loss by acid erosion.

This paper describes a novel application of transverse microradiography for the detection and quantification of mineral loss due to acid erosion in thin tooth sections. Sixty-four specimens were randomly divided into eight equal-sized groups and exposed to an orthophosphoric-acid-based erosive fluid (pH = 3) for 0, 0.25, 0.5, 1, 2, 5, 12, or 24 hrs. We made microdensitometric scans separately across both enamel and dentin to derive data for the total mineral loss and the minimum mineral content within the eroded area. We then analyzed specimens using a profilometer to determine (1) the area above a plot of penetration depth against distance and (2) the maximum depth of penetration. Correlation coefficients for comparisons between microradiographic and profilometric data for both enamel and dentin specimens varied between 0.87 and 0.96. Two-sample t tests demonstrated that the microradiographic technique could detect early erosion, i.e., discriminate between erosion times of less than 1 hr. It was concluded that this application of transverse microradiography was a useful and acceptable method for the measurement of early mineral loss in vitro, occurring as a result of acid erosion.

Absorptiometry, Photon↗
PubMed1995

A clinical study of pulsed Nd: YAG laser-induced pulpal analgesia.

The pulsed Nd: YAG laser is advocated as an alternative means of providing analgesia during routine dental procedures. Since the evidence to support this claim is mainly anecdotal, a clinical trial was carried out using an electric pulp tester (EPT) to measure the extent and duration of any analgesic effect induced by pulsed Nd: YAG laser treatment. A double-blind crossover experiment involving laser and sham treatments was used on 21 subjects. A small (3.6 arbitrary units) but statistically significant increase was observed in the mean responses measured 5 min after laser treatment with 113 mJ pulses at 15 pulses s-1 (pps) for 3 min. The pain thresholds returned to baseline values after 60 min. No statistically significant changes in threshold were found with the sham treatment. The order in which laser and sham treatment was received made no difference to the results.

Adult↗
PubMed1995

The effect of an Nd-YAG pulsed laser on the cleaning of the root canal and the formation of a fused apical plug.

A Neodymium-yttrium aluminium garnet (Nd-YAG) pulsed laser was used in vitro to determine whether various laser energy levels from 0.75 W to 1.7 W at 15 pulses s(-1) (pps) were able to (i) remove debris from the walls of prepared root canals (ii) remove pulpal tissue from unprepared canals and (iii) create a fused apical plug from dentine chips, hydroxyapatite (HAP) or low-fusing dental porcelain. Single-rooted teeth were sectioned at the amelocemental junction and the crowns discarded. The root canals of 50 teeth were prepared chemomechanically and allocated to four groups of 10 teeth for laser treatment. One group was left unlased as a control. After lasing, the teeth were split longitudinally, stained and examined for residual debris. Results showed that there was no statistically significant difference between the groups (P<0.05). A further 20 teeth were not prepared and lased in the coronal one-third of the root canal at different energy levels; five teeth were not lased. The teeth were split and examined as previously. The results showed that lasing cleaned the coronal part of the root canal almost completely of pulpal tissue. In the final part of the study laser energy was applied to dentine chips, HAP and low-fusing porcelain in an attempt to produce a fused apical plug. The laser was unable to melt the dentine chips but some hardening of HAP occurred when combined with blue food-colouring, with or without glycerine, at energy levels of 1.0 W, at 15 pps for 30 s. Superficial hardening of low-fusing porcelain occurred at 1.0 W, 15 pps for 30 s.

Bicuspid↗
PubMed1995

The effect of sucrose-containing chewing-gum use on in situ enamel lesion remineralization.

Two independent cross-over studies have now been carried out to evaluate the effect of a regime of chewing sucrose-containing gum on enamel lesion remineralization. The first study has been reported in detail elsewhere. This further study aimed to increase the data set with an additional 13 volunteers. Similar protocols were followed in both studies. Weighted averages from the two studies showed delta z values corresponding to 16.8% remineralization for the gum versus 11.6% remineralization for the control (p = 0.046, two-sided). A significant difference between test and control was evident for lesion body (p = 0.0004, two-sided) but not for surface zone (p = 0.32, two-sided).

Adult↗