Biomedical subjects

R W Lenz

Publications and source records attributed to R W Lenz.

At least 19 recordsLinked to original sources

PubMed2001

Polyesters from microorganisms.

Bacterial polyesters have been found to have useful properties for applications as thermoplastics, elastomers, and adhesives and are biodegradable and biocompatible. Poly(3-hydroxyalkanoates) (PHAs) and poly(beta-malate) are the most representative polyesters synthesized by microorganisms. PHAs containing a wide variety of repeating units can be produced by bacteria, including those containing many types of pendant functional groups which can be synthesized by microorganisms that are grown on unnatural organic substrates. Poly(beta-malate) is of interest primarily for medical applications, especially for drug delivery systems. In this chapter, the bacterial production and properties of poly(3-hydroxyalkanoates) and poly(beta-malate) are described with emphasis on the former.

Acyltransferases↗

PubMed2001

Comparative study of the relationship between monomer structure and reactivity for two polyhydroxyalkanoate synthases.

Using organically synthesized hydroxyalkanoate coenzyme A thioesters, the activities of two short-chain polyhydroxalkanoate (PHA) synthases were investigated--Ralstonia eutropha PHA synthase (a type I PHA synthase) and Ectothiorhodospira shaposhnikovii PHA synthase (a type III synthase). The results indicate that the two synthases have similar activities towards most of the monomers tested. 3-Hydroxybutyryl CoA was found to be the most efficient substrate for both synthases. Changes in the side-chain length of the monomers affect monomer reactivity, with shortening of the side-chain length having the more severe effect. Hydrophobicity in the side chain appears to play an important role in the catalytic reaction. The configuration and the position of the hydroxyl group also affect the reactivity of a monomer. Monomers with the [S] configuration can not be recognized by either synthase. Moving the hydroxyl group from the beta carbon to the alpha carbon has a much more severe effect on the reactivity of the monomer than moving the hydroxyl group to the gamma carbon. The results demonstrate that the in vitro system can be used to prepare entirely novel polymers that may not be obtainable from living cells because of metabolic restrictions.

Acyl Coenzyme A↗

PubMed2001

Synthesis of poly(2-methyl-3-hydroxyoctanoate) via anionic polymerization of alpha-methyl-beta-pentyl-beta-propiolactone.

Synthesis of an alpha,beta-alkyl branched polyester, i.e., poly(2-methyl-3-hydroxyoctanoate), has been accomplished via anionic polymerization of alpha-methyl-beta-pentyl-beta-propiolactone mediated by supramolecular complexes of potassium methoxide or potassium hydroxide, respectively. The structure of resulting polymers has been established by electrospray ionization multistage mass spectrometry (ESI-MSn), FT-IR, NMR, and GPC analyses. Previously proposed addition-elimination mechanism of the polymerization of beta-lactones containing alpha-hydrogen by alkoxide anion has been confirmed to operate also in the case of beta-lactone having alkyl substituents in both alpha and beta positions.

Methods↗

PubMed2000

Enzymatic hydrolysis of oligomeric models of poly-3-hydroxybutyrate.

The mechanism of the enzymatic degradation of poly([R]-3-hydroxybutyrate) (PHB) was investigated by using well-defined model substrates, including both linear and cyclic [R]-3-hydroxybutyrate (3HB) and [R]-3-hydroxyvalerate (3HV) oligomers, with two different PHB depolymerases. The linear and cyclic oligomers containing from 2 to 10 repeating units were hydrolyzed in solutions of the depolymerase isolated from Aspergillus fumigatus and Alcaligenes faecalis, and the rates of hydrolysis and types of products formed were characterized. Both of the depolymerases catalyzed the hydrolysis of the cyclic oligomers (macrolides) which contained more than three 3HB and 3HV repeating units. The degradation reactions of the linear and cyclic 3HB oligomers with the A. fumigatus depolymerase gave similar ratios of monomer-to-dimer products, but PHB itself formed mostly monomer on hydrolysis, indicating that the enzymatic hydrolysis reactions occurred by different mechanisms for these different types of substrates. The results of this study conclusively show that at least the endo mode of polymer hydrolysis occurs with the two enzymes studied, while the A. fumigatus depolymerase was found to utilize both endo and exo modes of hydrolysis to efficiently degrade PHB and 3HB oligomers.

3-Hydroxybutyric Acid↗

PubMed2000

Kinetic and mechanistic characterization of the polyhydroxybutyrate synthase from Ralstonia eutropha.

Purified Ralstonia eutropha polyhydroxybutyrate (PHB) synthase from recombinant cells can exist as monomer and dimer. The polymerization reaction catalyzed by this enzyme displays a lag phase, which causes difficulties for kinetic and mechanistic characterization of the enzymatic polymerization reaction. In this study, we developed a method to eliminate the lag phase of PHB synthase by physical means, i.e., adding multihydroxyl compounds to the enzyme solution. This method allows us to recognize the nature of the lag phase as a physical rather than a chemical process. With such lag-phase-free-enzyme, the kinetic properties of the enzyme were investigated. The results indicate that 3-hydroxybutyryl-CoA (3HBCoA) is the optimal substrate for the enzyme. A slower catalytic rate and lower binding ability account for a lower reactivity of 3-hydroxyvaleryl-CoA (3HVCoA) compared to that of 3HBCoA. The change of hydroxyl group from the beta to the gamma position causes dramatic decreases in the binding ability of 4-hydroxybutyryl-CoA (4HBCoA). By using a dilution strategy and size exclusion chromatographic technique, the active form of the enzyme was identified to be the dimeric form. The number of catalytic sites in the dimeric form of the enzyme was examined by comparing the molecular weight of polyhydroxybutyrate as a function of substrate-to-enzyme ratio. The results suggest that the dimeric enzyme has only one catalytic site. A revised model of polymerization reaction catalyzed by R. eutropha PHB synthase is described.

Acyltransferases↗

PubMed2000

In vitro polymerization and copolymerization of 3-hydroxypropionyl-CoA with the PHB synthase from Ralstonia eutropha.

The poly(3-hydroxybutyrate) (PHB) synthase of Ralstonia eutropha, which was produced by a recombinant strain of Escherichia coli and purified in one step with a methyl-HIC column to a purity of more than 90%, was used to polymerize 3-hydroxypropionyl-CoA (3HPCoA) and to copolymerize 3HPCoA with 3-hydroxybutyryl-CoA (3HBCoA). A Km of 189 microM and a kcat of 10 s-1 were determined for the activity of the enzyme in the polymerization reaction of 3HPCoA based on the assumption that the dimer form of PHB synthase was the active form. Free coenzyme A was found to be a very effective competitive inhibitor for the polymerization of 3HPCoA with a Ki of 85 microM. The maximum degree of conversion of 3HPCoA to polymer was less than 40%. In the simultaneous copolymerization reactions of these two monomers, both the turnover number for the copolymerization reaction and the maximum degree of conversion of 3HPCoA and 3HBCoA to copolymers increased with an increase in the amount of 3HBCoA in the monomer mixture. However, the maximum conversion of 3HPCoA to copolymer was always less than 35%, regardless of the ratio of 3HPCoA to 3HBCoA. Block copolymers were obtained by the sequential copolymerization of the two monomers and these copolymers had a much narrower molecular weight distribution than those obtained by the simultaneous copolymerization for the same molar ratio of 3HPCoA to 3HBCoA.

Acyltransferases↗

PubMed2000

Characterization, seasonal occurrence, and diel fluctuation of poly(hydroxyalkanoate) in photosynthetic microbial mats.

In situ poly(hydroxyalkanoate) (PHA) levels and repeating-unit compositions were examined in stratified photosynthetic microbial mats from Great Sippewissett Salt Marsh, Mass., and Ebro Delta, Spain. Unlike what has been observed in pure cultures of phototrophic bacteria, the prevalence of hydroxyvalerate (HV) repeating units relative to hydroxybutyrate (HB) repeating units was striking. In the cyanobacteria-dominated green material of Sippewissett mats, the mole percent ratio of repeating units was generally 1HB:1HV. In the purple sulfur bacteria-dominated pink material the relationship was typically 1HB:2HV. In Sippewissett mats, PHA contributed about 0.5 to 1% of the organic carbon in the green layer and up to 6% in the pink layer. In Ebro Delta mats, PHA of approximately 1HB:2HV-repeating-unit distribution contributed about 2% of the organic carbon of the composite photosynthetic layers (the green and pink layers were not separated). Great Sippewissett Salt Marsh mats were utilized for more extensive investigation of seasonal, diel, and exogenous carbon effects. When the total PHA content was normalized to organic carbon, there was little seasonal variation in PHA levels. However, routine daily variation was evident at all sites and seasons. In every case, PHA levels increased during the night and decreased during the day. This phenomenon was conspicuous in the pink layer, where PHA levels doubled overnight. The daytime declines could be inhibited by artificial shading. Addition of exogenous acetate, lactate, and propionate induced two- to fivefold increases in the total PHA levels when applied in the daylight but had no effect when applied at night. The distinct diel pattern of in situ PHA accumulation at night appears to be related, in some phototrophs, to routine dark energy metabolism and is not influenced by the availability of organic nutrients.

Alkanes↗

PubMed1999

Intracellular depolymerase activity in isolated inclusion bodies containing polyhydroxyalkanoates with long alkyl and functional substituents in the side chain.

The in vitro degradation of isolated Pseudomonas oleovorans inclusion bodies containing either poly-3-hydroxynonanoate (PHN), or poly(-3-hydroxy-5-phenylvalerate) (PHPV), or a mixture of these two polymers was investigated. When incubated at 30 degrees C and pH 9, inclusion bodies containing either polyhydroxyoctanoate (PHO), PHN or PHPV exhibited similar degradation rates of approximately 0.94 (+/- 3%) mg/h. The PHN and PHPV components for inclusion bodies containing a mixture of PHN and PHPV showed similar degradation rates; that is the ratios showed little change and remained at approximately 50 wt.% (+/- 3%) for each component. These results contrast markedly with in vivo studies for similar inclusion bodies in whole cells. The results suggest that the synthesis and degradation of these novel polyhydroxyalkanoates by P. oleovorans proceeds by the same enzymatic pathway. In addition, comparisons between the in vivo and in vitro polymer degradation suggest that the activity of the intracellular depolymerase does not control the rate limiting step of PHPV degradation in vivo. Instead, the presence of an aromatic group in the repeating units of this polymer may inhibit the utilization of the monomeric units of PHPV as a reserve carbon source by the cells.

Bacterial Proteins↗

PubMed1999

Characterization by mass spectrometry of poly(3-hydroxyalkanoates) produced by Rhodospirillum rubrum from 3-hydroxyacids.

The sequence distributions of two microbial copolyesters obtained by fermentation of Rhodospirillum rubrum, grown with 3-hydroxyhexanoic or 3-hydroxyheptanoic acids, were determined by analyzing the oligomers prepared by partial pyrolysis or partial methanolysis of these copolyesters using fast atom bombardment mass spectrometry (FAB-MS). Oligomers up to pentamers were identified in the case of partial pyrolysis and up to tetradecamers in the case of partial methanolysis. The comparison between the experimental and calculated peak intensities of FAB mass spectra allows the calculation of compositions and sequence distributions, which in these copolyesters follow Bernoullian statistics, indicating that they are random terpolyesters.

Biopolymers↗

PubMed1999

In vivo biocompatibility and degradation studies of polyhydroxyoctanoate in the rat: a new sealant for the polyester arterial prosthesis.

The present study examined the biocompatibility and degradation properties of poly (beta-hydroxy octanoate) (PHO) as an impregnation substrate on arterial prostheses. PHO-impregnated polyester grafts sterilized by ethylene oxide (EO) or gamma (gamma) radiation, and polyester Dacron(R) prostheses impregnated with fluoropolymer, gelatin, or albumin were implanted subcutaneously in rats for periods ranging from 2 to 180 days. The biocompatibility was assessed by quantifying the alkaline and acid phosphatase secretion while performing histological studies at the tissue/prosthesis interface. The degradation was determined by chemical analysis of the EO and gamma-sterilized PHO after implantation using differential scanning calorimetry (DSC), wide angle x-ray diffraction (WAXD), and size exclusion chromatography (SEC). Alkaline phosphatase activity by the sterilized PHO and by the gelatin and albumin grafts was significantly elevated early after implantation in contrast to that of the Dacron and fluoropolymer grafts that occurred later, at 7 and 5 days, respectively The peak of acid phosphatase activity for all of the grafts occurred between 5 and 10 days postimplantation, with the gamma-sterilized PHO grafts recording the greatest activity. Histological study revealed that the tissue incorporation into the graft wall was earlier and more complete for the Dacron and fluoropolymer grafts after 6 months than for the gelatin and albumin grafts, because the latter induced important inflammatory reactions during the resorption of the cross-linked protein substrates. The EO and gamma-sterilized PHO grafts exhibited a similar healing sequence characterized by the development of a collagenous tissue surrounding the prostheses. However, no infiltration of tissue into the graft wall was observed after 6 months, mainly because of the presence of the PHO. Degradation of the EO and gamma-sterilized PHO occurred preferentially by a hydrolytic mechanism as shown by a 30% molecular weight decrease after 6 months. In conclusion, PHO showed good biocompatibility in terms of enzyme activity and tissue reaction. Degradation was a slow, in vivo process controlled primarily by a random hydrolytic reaction and by a local enzymatic attack by macrophages and giant cells.

Acid Phosphatase↗

PubMed1999

Production of poly(3-hydroxybutyric acid-co-4-hydroxybutyric acid) and poly(4-hydroxybutyric acid) without subsequent degradation by Hydrogenophaga pseudoflava.

A Hydrogenophaga pseudoflava strain was able to synthesize poly(3-hydroxybutyric acid-co-4-hydroxybutyric acid) [P(3HB-co-4HB)] having a high level of 4-hydroxybutyric acid monomer unit (4HB) from gamma-butyrolactone. In a two-step process in which the first step involved production of cells containing a minimum amount of poly(3-hydroxybutyric acid) [P(3HB)] and the second step involved polyester accumulation from the lactone, approximately 5 to 10 mol% of the 3-hydroxybutyric acid (3HB) derived from the first-step culture was unavoidably reincorporated into the polymer in the second cultivation step. Reincorporation of the 3HB units produced from degradation of the first-step residual P(3HB) was confirmed by high-resolution 13C nuclear magnetic resonance spectroscopy. In order to synthesize 3HB-free poly(4-hydroxybutyric acid) [P(4HB)] homopolymer, a three-stage cultivation technique was developed by adding a nitrogen addition step, which completely removed the residual P(3HB). The resulting polymer was free of 3HB. However, when the strain was grown on gamma-butyrolactone as the sole carbon source in a synthesis medium, a copolyester of P(3HB-co-4HB) containing 45 mol% 3HB was produced. One-step cultivation on gamma-butyrolactone required a rather long induction time (3 to 4 days). On the basis of the results of an enzymatic study performed with crude extracts, we suggest that the inability of cells to produce 3HB in the multistep culture was due to a low level of 4-hydroxybutyric acid (4HBA) dehydrogenase activity, which resulted in a low level of acetyl coenzyme A. Thus, 3HB formation from gamma-butyrolactone is driven by a high level of 4HBA dehydrogenase activity induced by long exposure to gamma-butyrolactone, as is the case for a one-step culture. In addition, intracellular degradation kinetics studies showed that P(3HB) in cells was completely degraded within 30 h of cultivation after being transferred to a carbon-free mineral medium containing additional ammonium sulfate, while P(3HB-co-4HB) containing 5 mol% 3HB and 95 mol% 4HB was totally inert in interactions with the intracellular depolymerases. Intracellular inertness could be a useful factor for efficient synthesis of the P(4HB) homopolymer and of 4HB-rich P(3HB-co-4HB) by the strain used in this study.

3-Hydroxybutyric Acid↗

PubMed1998

Protein organization on the PHA inclusion cytoplasmic boundary.

Polyhydroxyalkanoate (PHA) cellular inclusions consist of polyesters, phospholipids, and proteins. Both the polymerase and the depolymerase enzymes are active components of the structure. Recently, proteins associated with these inclusions have been described in a number of bacterial species. In order to further clarify the structure and function of these proteins in relation to polymer inclusions, ultrastructural studies of isolated polymer inclusions were initiated. The surface boundary characteristics of polymer inclusions, produced by several genera of bacteria, two different Pseudomonas putida deletion mutants and by Escherichia coli recombinants, were examined. The recombinant E. coli carried either the PHB biosynthesis operon (phaCAB) from Ralstonia eutropha alone, or both this operon and a gene encoding an inclusion surface protein of R. eutropha (phaP). The results support two suggestions: (i) specific genes in the PHA gene cluster code for the proteins forming the surface boundary arrays which characterize the polymer inclusion; and (ii) transfer of such a gene would result in subcellular compartmentalization of accumulating polymer. Although the proteins appear to serve a similar function among different genera, nevertheless, the different surface proteins are encoded by a variety of non-homologous genetic sequences.

Acids, Acyclic↗

PubMed1998

Investigation of the function of proteins associated to polyhydroxyalkanoate inclusions in Pseudomonas putida BMO1.

Polyhydroxyalkanoate (PHA) granule associated proteins from Pseudomonas oleovorans were purified and the N-terminal sequences of two major proteins migrating in sodium dodecyl sulfate polyacrylamide gels with a relative molecular mass of 18 and 43 kDa (GA1 and GA2, respectively) were analyzed. Radiolabeled degenerate probes deduced from these amino acid sequences were used to identify genomic DNA fragments from P. oleovorans and Pseudomonas putida encoding GA1 and GA2. DNA sequence analysis of the fragments obtained from P. putida revealed that the genes encoding these proteins were adjacent to phaC2 and ORF3, the PHA synthase II gene and an open reading frame of unknown function, respectively, found at the P. oleovorans and P. aeruginosa PHA synthase gene locus. The open reading frames encoding GA1, GA2 and ORF3 or smaller fragments beginning at GA1 were inactivated by chromosomal insertion of the Tn5 kanamycin resistance gene block (neo). When these mutants were grown on mineral salts agar media under nitrogen limitation, containing gluconate or decanoate as carbon sources, they appeared more translucent than the wild-type grown under similar conditions. Gas-chromatographic analysis of the cellular dry mass revealed that the mutant strains accumulated 30-50% less PHA than the P. putida wild type.

Acids, Acyclic↗

PubMed1998

Differential scanning calorimetric study of poly(3-hydroxyoctanoate) inclusions in bacterial cells.

Medium chain length polyhydroxyalkanoates, MCL-PHAs, produced by bacteria as inclusion bodies or granules were analyzed in situ by differential scanning calorimetry (DSC) without isolation from the cells. The kinetic DSC study of PHA granules, which contained mostly 3-hydroxyoctanoate units (PHO), in Pseudomonas putida BM01 cells showed that the polymer within the granules existed in an amorphous state, but it crystallized after dehydration of the cells under freeze-drying condition (below -50 degrees C) followed by annealing at ambient temperature. In this manner, PHO within the cells readily crystallized to the maximum degree of crystallinity within 24 h at room temperature, which was much faster than for the same polymer isolated by solvent extraction. This observation suggests that the polymer within the cellular granules may be well organized. The DSC endothermic melting peak areas for the room-temperature annealed polymers within the cells were directly proportional to the amount of polymer in the cell, and the results from this type of quantitative analysis were essentially identical to those obtained by gas chromatographic and gravimetric analysis of the polymers. X-Ray diffraction analysis of the polymer in the freeze-dried, whole cells and of the isolated, fully crystallized polymer showed that the two types of PHO samples had similar crystal structures, but the polymer in the granules exhibited better side-chain packing and higher crystallinity.

Calorimetry, Differential Scanning↗

PubMed1996

Sequential production of two different polyesters in the inclusion bodies of Pseudomonas oleovorans.

When Pseudomonas oleovorans was grown on a mixture of 5-phenylvaleric acid, PVA, and nonanoic acid, NA, the reserve polyester produced included both a homopolymer and a copolymer. The homopolymer poly-3-hydroxy-5-phenylvalerate, PHPV, contained only 3-hydroxy-5-phenylvalerate units, while the copolymer contained the same long chain 3-hydroxyalkanoates as those present in the copolymer poly-3-hydroxynonanoate, PHN, which is produced from acid alone. The intracellular location of each of these polymers was determined by selective staining of the inclusion body granules with ruthenium tetraoxide and examination by transmission electron microscopy showed that both types of polyesters occurred in the same granule. PHN was present in the center of the granule, while PHPV accumulated around the PHN in the inclusion body. The proteins associated with the inclusion bodies were separated using sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). In all cases, two different polymerase enzymes of molecular weight 59 and 55 KDa were present, indicating that the same polymerase enzyme system was responsible for the production of both PHN and PHPV. Attempts were made to produce a random copolymer containing both alkyl and phenylalkyl repeat units by varying the growth conditions, but a mixture of PHN and PHPV was always produced instead.

Electrophoresis, Polyacrylamide Gel↗

PubMed1996

Intracellular depolymerase functionality and location in Pseudomonas oleovorans inclusions containing polyhydroxyoctanoate.

Microbial poly-3-hydroxyoctanoate inclusion bodies produced by Pseudomonas oleovorans when grown on n-octanoic acid, are complex macromolecular structures consisting of polyester, organized paracrystalline lattice arrays and lipids. While it is known that the polymer in the granules maintains its native, amorphous state while it is surrounded by the components of this complex, the precise functions of the various components during polymer production and utilization have yet to be established. By utilizing electron microscopy, SDS-PAGE, and gel filtration chromatography along with in vitro assays for depolymerase activity, the present study demonstrates that a protein species with molecular weight of approximately 32 kDa is the depolymerase protein of the polymer inclusion. When exogenous carbon was exhausted, cell viability required utilization of the stored polyester. Under these conditions, the concentration of the depolymerase increased while the concentrations of the polymerase decreased. Thus, the association of the depolymerase with the granules was shown to be under metabolic regulation relative to the polymerase. The results from the present studies show that careful manipulation of the substrate concentration can selectively, and differentially, alter the level of inclusion associated proteins as well as the quantity and quality of the polyester which is accumulated.

Bacterial Proteins↗

PubMed1996

Intracellular depolymerase and polyhydroxyoctanoate granule integrity in Pseudomonas oleovorans.

When polyhydroxyoctanoate (PHO) was produced by Pseudomonas oleovorans during a regimen of intermittent feeding on octanoic acid, there was a significant change in both the polymer associated proteins and the composition of the enclosed polymer. The polymer granules were isolated with their protein coat intact and the enzymatic hydrolysis of the polymer within this cell free system was determined. The degradation rate for the PHO in these native granules reached a maximum of 1.17 mg/h at an optimum pH of 9 when incubated at 30 degrees C. A study of the effect of various inhibitors on depolymerase activity suggested that the enzyme most likely has disulfide linkages and serine residues at its active site. Ultrastructure studies suggested this loss of enzyme activity was correlated with significant organizational degeneration in the proteins associated with the PHO inclusion body. Once solubilized from the granule, the depolymerase itself remained enzymatically active, and addition of this released material to other granule preparations increased the rate of polymer granule degradation. Similarly, when colloidal suspensions of purified, amorphous PHO were placed in contact with that depolymerase, they also underwent rapid degradation. In contrast, when crystalline solvent-cast PHO films were placed in contact with this enzyme, no degradative activity was observed.

Bacterial Proteins↗

PubMed1994

Quantitative determination of intracellular depolymerase activity in Pseudomonas oleovorans inclusions containing poly-3-hydroxyalkanoates with long alkyl substituents.

Research regarding the accurate, quantitative degradation of novel poly-3-hydroxyalkanoates has been restricted by the absence of an appropriate monitoring technique. The calibration of a gas chromatograph to poly-3-hydroxyoctanoate reveals a linear relationship between the area under gas chromatograph tracings and polymer weight. With this new method, poly-3-hydroxy-octanoate granules isolated from Pseudomonas oleovorans, which were incubated at 30 degrees C in an alkaline buffer, exhibited a linear degradation rate. Degradation was inhibited by the presence of Triton X-100 and phenylmethylsulfonyl fluoride. The depolymerase was demonstrated to be associated with the polymer granule complex and most likely possessed serine residues at its active site.

Chromatography, Gas↗