Biomedical subjects

R van Dijkhuizen-Radersma

Publications and source records attributed to R van Dijkhuizen-Radersma.

8 recordsLinked to original sources

PubMed2005

Controlled release of proteins from degradable poly(ether-ester) multiblock copolymers.

A new series of multiblock poly(ether-ester)s based on poly(ethylene glycol) (PEG), butylene terephthalate (BT) and butylene succinate (BS) segments were introduced as matrices for controlled release applications. The release of two model proteins, lysozyme and bovine serum albumin (BSA), from poly(ether-ester) films were evaluated and correlated to the swelling and degradation characteristics of the polymer matrices. First- and zero-order profiles were found for the release of lysozyme, depending on the composition of the polymer matrix. The initial diffusion coefficient was correlated to the swelling of the matrix, which increased with longer PEG segments and lower BT/BS ratios of the polymer. High swelling matrices released the lysozyme according to diffusion-controlled first-order release profiles. Zero-order release profiles were obtained from less swollen matrices due to a combination of diffusion and degradation of the matrix. In contrast to the release of lysozyme, BSA was released from the poly(ether-ester) matrices via delayed release profiles. Both the delay time and the release rate could be tailored by varying the matrix composition. The BSA release rate was mainly determined by the degradation, whereas the delay time was determined by a combination of the swelling and the degradation rate of the polymer matrix.

Diffusion↗

PubMed2004

Biodegradable poly(ether-ester) multiblock copolymers for controlled release applications: An in vivo evaluation.

Multiblock poly(ether-ester)s based on poly(ethylene glycol), butylene terephthalate, and butylene succinate segments were evaluated for their in vivo degradation and biocompatibility in order to establish a correlation with previously reported in vitro results. Porous polymer sheets were implanted subcutaneously for 32 weeks in rats. The degradation was monitored visually (histology), by molecular weight (GPC), and by copolymer composition (NMR). Substitution of the aromatic terephthalate units by aliphatic succinate units was shown to accelerate the degradation rate of the copolymers. Direct correlation of the in vivo and in vitro degradation of the porous implants showed a slightly faster initial molecular weight decrease in vivo. Besides hydrolysis, oxidation occurs in vivo due to the presence of radicals produced by inflammatory cells. In addition, the higher molecular weight plateau of the residue found in vivo indicated a higher solubility of the oligomers in the extracellular fluid compared to a phosphate buffer. Minor changes in the poly(ether-ester) compositions were noted due to degradation. Microscopically, fragmentation of the porous implants was observed in time. At later stages of degradation, macrophages were observed phagocytozing small polymer particles. Both in vitro cytotoxicity studies and histology on in vivo samples proved the biocompatibility of the poly(ether-ester)s.

Animals↗

PubMed2004

In vitro/in vivo correlation for 14C-methylated lysozyme release from poly(ether-ester) microspheres.

PURPOSE: The purpose of this study was to obtain an in vitro/in vivo correlation for the sustained release of a protein from poly(ethylene glycol) terephthalate (PEGT)/poly(butylene terephthalate) (PBT) microspheres. METHODS: Radiolabeled lysozyme was encapsulated in PEGT/PBT microspheres via a water-in-oil-in-water emulsion. Three microsphere formulations varying in copolymer composition were administered subcutaneously to rats. The blood plasma was analyzed for radioactivity content representing released lysozyme at various time points post-dose. The in vitro release was studied in phosphate-buffered saline. RESULTS: The encapsulation efficiency, calculated from the radioactivity in the outer water phase of the emulsion, varied from 60-87%. Depending on the PEG segment length and wt% PEGT, the lysozyme was released completely in vitro within 14 to 28 days without initial burst. 14C-methylated lysozyme could be detected in the plasma over the same time courses. The in vitro/in vivo correlation coefficients obtained from point-to-point analysis were greater than 0.96 for all microsphere formulations. In addition, less then 10% of administered radioactivity remained at dose site at 28 days for the microsphere formulations, indicating no notable retention of the protein at the injection site. CONCLUSION: The in vitro release in phosphate-buffered saline and the in vivo release in rats showed an excellent congruence independent of the release rate of 14C-methylated lysozyme from PEGT/PBT microspheres.

Animals↗

PubMed2003

Biodegradable poly(ether-ester) multiblock copolymers for controlled release applications.

Multiblock poly(ether-ester)s based on poly(ethylene glycol), butylene terephthalate, and butylene succinate units were synthesized by a two-step melt polycondensation reaction, with the aim of developing a new series of degradable polymers for controlled release applications. The copolymers were characterized with respect to their composition (NMR), thermal properties (DSC), and swelling. The main focus was on the degradation kinetics and release properties of the copolymers. The crystallinity and swelling could be tailored by the PEG segment length and the ratio of the building units. With increasing mol fraction succinate in the hard segment, the swelling increased. The in vitro degradation was found to occur by molecular weight decrease and mass loss. Substitution of the aromatic terephthalate units by aliphatic succinate units increased the degradation rate of the copolymers. Polymers with PEG segments of 1000 kg/mol showed a more pronounced degradation than copolymers containing shorter and longer PEG segments. Model proteins were successfully incorporated and released from the poly(ether-ester) films. Depending on the size of the protein, the release mechanism was based on diffusion of the protein and degradation of the matrix.

Animals↗

PubMed2003

Release of small water-soluble drugs from multiblock copolymer microspheres: a feasibility study.

Poly(ethylene glycol)-terephthalate/poly(butylene terephthalate) (PEGT/PBT) multiblock copolymer was investigated as a possible matrix for controlled delivery of small water-soluble drugs. Two molecules were selected as sustained release candidates from microspheres: leuprorelin acetate (peptide of Mw = 1270 D) and vitamin B(12) (Mw = 1355 D). First, vitamin B(12)-loaded microspheres were prepared using a double emulsion method and preparation parameters were varied (surfactant in the first emulsion and copolymer composition). The resulting microsphere structure, entrapment efficiency and release rate were evaluated. Vitamin B(12)-loaded microsphere parameters could easily be tailored to achieve specific requirements. The addition of surfactant in the first preparation process led to a significant increase of the microsphere entrapment efficiency, whereas the decrease of the PEGT copolymer content allowed the release rates from microspheres to be precisely decreased. However, leuprorelin acetate-loaded microspheres did not show the same characteristics when prepared with the same parameters, possibly because of a high water solubility discrepancy between the vitamin B(12) and the peptide. This study shows the suitability of PEGT/PBT microspheres as a controlled release system for vitamin B(12), but not for leuprorelin acetate. It also underlines the necessity of tailored development for each individual drug and emphasizes the risk of using model molecules.

Delayed-Action Preparations↗

PubMed2002

Stability aspects of salmon calcitonin entrapped in poly(ether-ester) sustained release systems.

Poly(ether-ester)s composed of hydrophilic poly(ethylene glycol)-terephthalate (PEGT) blocks and hydrophobic poly(butylene terephthalate) (PBT) blocks were studied as matrix for the controlled release of calcitonin. Salmon calcitonin loaded PEGT/PBT films were prepared from water-in-oil emulsions. The initial calcitonin release rate could be tailored by the copolymer composition, but incomplete release of calcitonin was observed. FTIR measurements indicated aggregation of calcitonin in the matrix, which was not due to the preparation method of the matrices, but due to the instability of calcitonin in an aqueous environment. Release experiments showed the susceptibility of calcitonin towards the composition of the release medium, in particular to the presence of metal ions. With increasing amount of sodium ions, a decrease in the total amount of released calcitonin was observed due to enhanced aggregation. The calcitonin had to be stabilized in the matrix to prevent aggregation. Incorporation of sodium dodecyl sulphate (SDS) as a stabilizer in PEGT/PBT matrices increased the percentage of calcitonin released, but could not avoid aggregation on a longer term.

Animals↗

PubMed2002

Control of vitamin B12 release from poly(ethylene glycol)/poly(butylene terephthalate) multiblock copolymers.

The release of vitamin B12 (1355 Da) from matrices based on multiblock copolymers was studied. The copolymers were composed of hydrophilic poly(ethylene glycol)-terephthalate (PEGT) blocks and hydrophobic poly(butylene terephthalate) (PBT) blocks. Vitamin B12 loaded films were prepared by using a water-in-oil emulsion method. The copolymer properties, like permeability, could be varied by increasing the PEG-segment length from 300 up to 4,000 g/mol and by changing the wt% of PEGT. From permeation and release experiments. the diffusion coefficient of vitamin B12 through PEGT/PBT films of different compositions was determined. The diffusion coefficient of Vitamin B12 was strongly dependent on the composition of the copolymers. Although an increased wt% of PEGT (at a constant PEG-segment length) resulted in a higher diffusion coefficient, a major effect was observed at increasing PEG-segment length. By varying the copolymer composition, a complete release of vitamin B12 in 1 day up to a constant release for over 12 weeks was obtained. The release rate could be effectively tailored by blending copolymers with different PEG-segment lengths. The swelling and the crystallinity of the matrix could explain the effect of the matrix composition on the release behavior.

Biocompatible Materials↗

PubMed2002

Biocompatibility and degradation of poly(ether-ester) microspheres: in vitro and in vivo evaluation.

Microspheres of a hydrophobic and a hydrophilic poly(ether-ester) copolymer were evaluated for their in vitro and in vivo biocompatibility and degradation. The microspheres prior to and after sterilization were tested for in vitro cytotoxicity. The in vivo biocompatibility of the poly(ethylene glycol) terephthalate and poly(butylene terephthalate) (PEGT/PBT) microspheres was evaluated subcutaneously and intramuscularly for 24 weeks in rabbits. The in vivo degradation of the microspheres was studied microscopically and compared to the in vitro degradation. The in vitro and in vivo studies showed the biocompatibility of the microspheres of both the hydrophobic and the hydrophilic PEGT/PBT copolymer. Extracts of these microspheres showed no cytotoxic reactivity in the in vitro cytotoxicity test. Sterilization of the microspheres by gamma irradiation did not affect the cytotoxicity. PEGT/PBT microspheres injected subcutaneously and intramuscularly in rabbits showed a mild tissue response in vivo, in terms of the inflammatory response, the foreign body reaction and the granulation tissue response. Although an in vitro degradation experiment showed a decrease in molecular weight due to hydrolysis, the in vivo degradation of the microspheres was slower than previously published.

Animals↗