Biomedical subjects

Raghavan Varadarajan

Publications and source records attributed to Raghavan Varadarajan.

18 recordsLinked to original sources

PubMed2007

Thermodynamic effects of proline introduction on protein stability.

The amino acid Pro is more rigid than other naturally occurring amino acids and, in proteins, lacks an amide hydrogen. To understand the structural and thermodynamic effects of Pro substitutions, it was introduced at 13 different positions in four different proteins, leucine-isoleucine-valine binding protein, maltose binding protein, ribose binding protein, and thioredoxin. Three of the maltose binding protein mutants were characterized by X-ray crystallography to confirm that no structural changes had occurred upon mutation. In the remaining cases, fluorescence and CD spectroscopy were used to show the absence of structural change. Stabilities of wild type and mutant proteins were characterized by chemical denaturation at neutral pH and by differential scanning calorimetry as a function of pH. The mutants did not show enhanced stability with respect to chemical denaturation at room temperature. However, 6 of the 13 single mutants showed a small but significant increase in the free energy of thermal unfolding in the range of 0.3-2.4 kcal/mol, 2 mutants showed no change, and 5 were destabilized. In five of the six cases, the stabilization was because of reduced entropy of unfolding. However, the magnitude of the reduction in entropy of unfolding was typically several fold larger than the theoretical estimate of -4 cal K(-1) mol(-1) derived from the relative areas in the Ramachandran map accessible to Pro and Ala residues, respectively. Two double mutants were constructed. In both cases, the effects of the single mutations on the free energy of thermal unfolding were nonadditive.

Amino Acid Substitution↗

PubMed2007

Role of stimuli-sensitive polymers in protein refolding: alpha-amylase and CcdB (controller of cell division or death B) as model proteins.

Alginate, a calcium-sensitive polymer, could carry out simultaneous purification and refolding of 8 M urea/100 mM dithiothreitol (DTT) denatured and thermally denatured alpha-amylase present in a commercial preparation. Activity recoveries of 80 and 70% in the former and the latter cases, respectively, were obtained. The fluorescence spectra showed refolding, and PAGE showed the absence of any aggregates in the refolded preparation. As another example, Eudragit S-100, a pH-sensitive poly(methyl methacrylate), was used to refold CcdB (controller of cell division or death B) protein. Initial experiments with wild-type (WT) CcdB showed that Eudragit bound and precipitated (upon lowering the pH to 4.0) CcdB quantitatively from the latter's aqueous solution. The bioconjugate showed DNA gyrase inhibition activity of CcdB and could be recycled. The inclusion bodies of CcdB mutant CcdB-17P were solubilized in 8 M urea/100 mM dithiothreitol. This preparation could be refolded by precipitation with Eudragit. The fluorescence and CD spectra showed that protein refolding has occurred.

Alginates↗

PubMed2006

Contribution of cation-pi interactions to protein stability.

Calculations predict that cation- interactions make an important contribution to protein stability. While there have been some attempts to experimentally measure strengths of cation-pi interactions using peptide model systems, much less experimental data are available for globular proteins. We have attempted to determine the magnitude of cation-pi interactions of Lys with aromatic amino acids in four different proteins (LIVBP, MBP, RBP, and Trx). In each case, Lys was replaced with Gln and Met. In a separate series of experiments, the aromatic amino acid in each cation-pi pair was replaced by Leu. Stabilities of wild-type (WT) and mutant proteins were characterized by both thermal and chemical denaturation. Gln and aromatic --> Leu mutants were consistently less stable than corresponding Met mutants, reflecting the nonisosteric nature of these substitutions. The strength of the cation-pi interaction was assessed by the value of the change in the free energy of unfolding [DeltaDeltaG(degrees) = DeltaG(degrees)(Met) - DeltaG(degrees)(WT)]. This ranged from +1.1 to -1.9 kcal/mol (average value -0.4 kcal/mol) at 298 K and +0.7 to -2.6 kcal/mol (average value -1.1 kcal/mol) at the Tm of each WT. It therefore appears that the strength of cation-pi interactions increases with temperature. In addition, the experimentally measured values are appreciably smaller in magnitude than calculated values with an average difference /DeltaG(degrees)expt - DeltaG(degrees)calc/av of 2.9 kcal/mol. At room temperature, the data indicate that cation-pi interactions are at best weakly stabilizing and in some cases are clearly destabilizing. However, at elevated temperatures, close to typical Tm's, cation-pi interactions are generally stabilizing.

Amino Acid Substitution↗

PubMed2006

Design of immunogens that present the crown of the HIV-1 V3 loop in a conformation competent to generate 447-52D-like antibodies.

gp120 is a subunit of the envelope glycoprotein of HIV-1. The third variable loop region of gp120 (V3 loop) contains multiple immunodominant epitopes and is also functionally important for deciding cell-tropism of the virus. 447-52D is a monoclonal antibody that recognizes the conserved tip of the V3 loop in a beta-turn conformation. This antibody has previously been shown to neutralize diverse strains of the virus. In an attempt to generate an immunogen competent to generate 447-52D-like antibodies, the known epitope of 447-52D was inserted at three different surface loop locations in the small, stable protein Escherichia coli Trx (thioredoxin). At one of the three locations (between residues 74 and 75), the insertion was tolerated, the resulting protein was stable and soluble, and bound 447-52D with an affinity similar to that of intact gp120. Upon immunization, the V3 peptide-inserted Trx scaffold was able to generate anti-V3 antibodies that could compete out 447-52D binding to gp120. Epitope mapping studies demonstrated that these anti-V3 antibodies recognized the same epitope as 447-52D. Although the 447-52D-type antibodies were estimated to be present at concentrations of 50-400 microg/ml of serum, these were not able to effect neutralization of strains like JRFL and BAL but could neutralize the sensitive MN strain. The data suggest that because of the low accessibility of the V3 loop on primary isolates such as JRFL, it will be difficult to elicit a V3-specific, 447-52D-like antibody response to effectively neutralize such isolates.

Amino Acid Sequence↗

PubMed2005

Protein minimization of the gp120 binding region of human CD4.

CD4 is an important component of the immune system and is also the cellular receptor for HIV-1. CD4 consists of a cytoplasmic tail, one transmembrane region, and four extracellular domains, D1-D4. Constructs consisting of all four extracellular domains of human CD4 as well as the first two domains (CD4D12) have previously been expressed and characterized. All of the gp120-binding residues are located within the first N-terminal domain (D1) of CD4. To date, it has not been possible to obtain domain D1 alone in a soluble and active form. Most residues in CD4 that interact with gp120 lie within the region 21-64 of domain D1 of CD4. On the basis of these observations and analysis of the crystal structure of CD4D12, a mutational strategy was designed to express CD4D1 and region 21-64 of CD4 (CD4PEP1) in Escherichia coli. K(D) values for the binding of CD4 analogues described above to gp120 were measured using a Biacore-based solution-phase competition binding assay. Measured K(D) values were 15 nM, 40 nM, and 26 microM for CD4D12, CD4D1, and CD4PEP1, respectively. All of the proteins interact with gp120 and are able to expose the 17b-binding epitope of gp120. Structural content was determined using CD and proteolysis. Both CD4D1 and CD4PEP1 were partially structured and showed an enhanced structure in the presence of the osmolyte sarcosine. The aggregation behavior of all of the proteins was characterized. While CD4D1 and CD4PEP1 did not aggregate, CD4D12 formed amyloid fibrils at neutral pH within a week at 278 K. These CD4 derivatives should be useful tools in HIV vaccine design and entry inhibition studies.

CD4 Antigens↗

PubMed2005

Protein stabilization by introduction of cross-strand disulfides.

Disulfides cross-link residues in a protein that are separated in primary sequence and stabilize the protein through entropic destabilization of the unfolded state. While the removal of naturally occurring disulfides leads to protein destabilization, introduction of engineered disulfides does not always lead to significant stabilization of a protein. We have analyzed naturally occurring disulfides that span adjacent antiparallel strands of beta sheets (cross-strand disulfides). Cross-strand disulfides have recently been implicated as redox-based conformational switches in proteins such as gp120 and CD4. The propensity of these disulfides to act as conformational switches was postulated on the basis of the hypothesis that this class of disulfide is conformationally strained. In the present analysis, there was no evidence to suggest that cross-strand disulfides are more strained compared to other disulfides as assessed by their torsional energy. It was also observed that these disulfides occur solely at non-hydrogen-bonded (NHB) registered pairs of adjacent antiparallel strands and not at hydrogen-bonded (HB) positions as suggested previously. One of the half-cystines involved in cross-strand disulfide formation often occurs at an edge strand. Experimental confirmation of the stabilizing effects of such disulfides was carried out in Escherichia coli thioredoxin. Four pairs of cross-strand cysteines were introduced, two at HB and two at NHB pairs. Disulfides were formed in all four cases. However, as predicted from our analysis, disulfides at NHB positions resulted in an increase in melting temperature of 7-10 degrees C, while at HB positions there was a corresponding decrease of -7 degrees C. The reduced state of all proteins had similar stability.

Animals↗

PubMed2005

Mutagenesis-based definitions and probes of residue burial in proteins.

Every residue of the 101-aa Escherichia coli toxin CcdB was substituted with Ala, Asp, Glu, Lys, and Arg by using site-directed mutagenesis. The activity of each mutant in vivo was characterized as a function of Controller of Cell Division or Death B protein (CcdB) transcriptional level. The mutation data suggest that an accessibility value of 5% is an appropriate cutoff for definition of buried residues. At all buried positions, introduction of Asp results in an inactive phenotype at all CcdB transcriptional levels. The average amount of destabilization upon substitution at buried positions decreases in the order Asp>Glu>Lys>Arg>Ala. Asp substitutions at buried sites in two other proteins, maltose-binding protein and thioredoxin, also were shown to be severely destabilizing. Ala and Asp scanning mutagenesis, in combination with dose-dependent expression phenotypes, was shown to yield important information on protein structure and activity. These results also suggest that such scanning mutagenesis data can be used to rank order sequence alignments and their corresponding homology models, as well as to distinguish between correct and incorrect structural alignments. With continuous reductions in oligonucleotide costs and increasingly efficient site-directed mutagenesis procedures, comprehensive scanning mutagenesis experiments for small proteins/domains are quite feasible.

Bacterial Proteins↗

PubMed2005

NMR structural analysis of a peptide mimic of the bridging sheet of HIV-1 gp120 in methanol and water.

gp120 is a subunit of the Env (viral envelope protein) of HIV-1. The protein consists of inner and outer domains linked by a bridging sheet. Several gp120 residues that bind the neutralizing antibody 17b as well as the cellular co-receptor CCR5 (CC chemokine receptor 5), are located in the bridging sheet. Peptides that mimic the 17b-binding regions of gp120 would be useful potential immunogens for the generation of neutralizing antibodies against HIV-1. Towards this end, a 26-residue, four-stranded beta-sheet peptide was designed on the basis of the structure of the bridging sheet, and its structure was characterized in methanol by NMR. In methanol, amide and alpha-proton resonances were well resolved and dispersed. A number of interstrand NOEs (nuclear Overhauser effects) were observed, providing good evidence for multiple turn beta-hairpin structure. NOEs also provided good evidence for all Xxx-D-Pro bonds in the trans configuration and all three turns formed by a two residue D-Pro-Gly segment to be of type II' turn. The structure conforms well to the designed four-stranded beta-sheet structure. Approx. 20% of the peptide was estimated to adopt a folded conformation in water, as evidenced by CD spectroscopy. This was consistent with smaller, but still significant, downfield shifts of C(alpha)H protons relative to random-coil values. A second peptide was designed with two disulphide bonds to further constrain the peptide backbone. While structured in methanol, this peptide, like the previous one, also exhibits only partial structure formation in water, as evidenced by CD spectroscopy.

Amino Acid Sequence↗

PubMed2005

Attempts to delineate the relative contributions of changes in hydrophobicity and packing to changes in stability of ribonuclease S mutants.

While the hydrophobic driving force is thought to be a major contributor to protein stability, it is difficult to experimentally dissect out its contribution to the overall free energy of folding. We have made large to small substitutions of buried hydrophobic residues at positions 8 and 13 in the peptide/protein complex, RNase-S, and have characterized the structures by X-ray crystallography. The thermodynamics of association of these mutant S peptides with S protein was measured in the presence of different concentrations of methanol and ethanol. The reduction in the strength of the hydrophobic driving force in the presence of these organic solvents was estimated from surface-tension data as well as from the dependence of the DeltaC(p) of protein/peptide binding on the alcohol concentration. The data indicated a decrease in the strength of the hydrophobic driving force of about 30-40% over a 0-30% range of the alcohol concentration. We observe that large to small substitutions destabilize the protein. However, the amount of destabilization, relative to the wild type, is independent of the alcohol concentration over the range of alcohol concentrations studied. The data clearly indicate that decreased stability of the mutants is primarily due to the loss of packing interactions rather than a reduced hydrophobic driving force and suggest a value of the hydrophobic driving force of less than 18 cal mol(-)(1) A(2).

Animals↗

PubMed2005

Characterization of gp120 and its single-chain derivatives, gp120-CD4D12 and gp120-M9: implications for targeting the CD4i epitope in human immunodeficiency virus vaccine design.

Single-chain derivatives of JRFL gp120 linked to the first two domains of human CD4 (gp120-CD4D12) or to the CD4 miniprotein analog CD4M9 (gp120-M9), have been constructed. Biacore studies revealed that gp120-CD4D12 and gp120-M9 bound to antibody 17b with dissociation constants of 0.8 and 25 nM, respectively, at pH 7.0, while gp120 alone did not bind. The binding of gp120-CD4D12 to 17b is not affected by the addition of excess soluble CD4D12, while the binding of gp120-M9 is enhanced. This finding indicates that the M9 component of the single chain interacts relatively weakly with gp120 and can be displaced by soluble CD4D12. Immunogenicity studies of gp120, gp120-CD4D12, and gp120-M9 were carried out with guinea pigs. All three molecules were highly immunogenic. The resulting antisera were examined for neutralizing activities against various human immunodeficiency virus type 1 isolates. Broadly neutralizing activity was observed only with sera generated against gp120-CD4D12. These antisera were depleted of anti-CD4D12 antibodies by being passed over a column containing immobilized CD4D12. The depleted sera showed a loss of broadly neutralizing activity. Sera that were affinity purified over a column containing immobilized gp120-M9 also lacked such neutralizing activity. This finding suggests that the broadly neutralizing response observed is exclusively due to anti-CD4 antibodies. Competition experiments showed that only antisera generated against gp120-CD4D12 competed with the CD4i antibody 17b and that this activity was not affected by depletion of anti-CD4 antibodies. The data indicate that although antibodies targeting the CD4i epitope were generated by the gp120-CD4D12 immunogen, these antibodies were nonneutralizing.

AIDS Vaccines↗

PubMed2004

Thermodynamic characterization of monomeric and dimeric forms of CcdB (controller of cell division or death B protein).

The protein CcdB (controller of cell division or death B) is an F-plasmid-encoded toxin that acts as an inhibitor of Escherichia coli DNA gyrase. The stability and aggregation state of CcdB have been characterized as a function of pH and temperature. Size-exclusion chromatography revealed that the protein is a dimer at pH 7.0, but a monomer at pH 4.0. CD analysis and fluorescence spectroscopy showed that the monomer is well folded, and has similar tertiary structure to the dimer. Hence intersubunit interactions are not required for folding of individual subunits. The stability of both forms was characterized by isothermal denaturant unfolding and calorimetry. The free energies of unfolding were found to be 9.2 kcal x mol(-1) (1 cal approximately 4.184 J) and 21 kcal x mol(-1) at 298 K for the monomer and dimer respectively. The denaturant concentration at which one-half of the protein molecules are unfolded (C(m)) of the dimer is dependent on protein concentration, whereas the C(m) of the monomer is independent of protein concentration, as expected. Although thermal unfolding of the protein in aqueous solution is irreversible at neutral pH, it was found that thermal unfolding is reversible in the presence of GdmCl (guanidinium chloride). Differential scanning calorimetry in the presence of low concentrations of GdmCl in combination with isothermal denaturation melts as a function of temperature were used to derive the stability curve for the protein. The value of Delta C (p) (representing the change in excess heat capacity upon protein denaturation) is 2.8+/-0.2 kcal x mol(-1) x K(-1) for unfolding of dimeric CcdB, and only has a weak dependence on denaturant concentration.

Bacterial Proteins↗

PubMed2004

Design of temperature-sensitive mutants solely from amino acid sequence.

Temperature-sensitive (Ts) mutants are a powerful tool with which to study gene function in vivo. Ts mutants are typically generated by random mutagenesis followed by laborious screening procedures. By using the Escherichia coli cytotoxin CcdB as a model system, simple procedures for generating Ts mutants at high frequency through site-directed mutagenesis were developed. Putative buried, hydrophobic residues are selected through analysis of the protein sequence. Residue burial is confirmed by ensuring that substitution of the residue by Asp leads to protein inactivation. At such sites, a Ts phenotype can typically be generated either by (i) substitution of two predicted, buried residues with the 18 remaining amino acids or (ii) introduction of Lys, Ser, Ala, and Trp at three to four predicted buried sites. By using these design strategies, 17 tight Ts mutants of CcdB were isolated at four predicted buried sites. The rules were further verified by making several Ts mutants of yeast Gal4 at residues 68, 69, and 70. No Ts mutants of either protein have been previously reported. Such Ts mutants of Gal4 can be used for conditional expression of a variety of genes by using the well characterized upstream-activating-sequence-Gal4 system.

Amino Acid Sequence↗

PubMed2004

Accurate detection of protein:ligand binding sites using molecular dynamics simulations.

Accurate prediction of location of cavities and surface grooves in proteins is important, as these are potential sites for ligand binding. Several currently available programs for cavity detection are unable to detect cavities near the surface or surface grooves. In the present study, an optimized molecular dynamics based procedure is described for detection and quantification of interior cavities as well as surface pockets. This is based on the observation that the mobility of water in such pockets is significantly lower than that of bulk water. The algorithm efficiently detects surface grooves that are sites of protein-ligand and protein-protein interaction. The algorithm was also used to substantially improve the performance of an automated docking procedure for docking monomers of nonobligate protein-protein complexes. In addition, it was applied to predict key residues involved in the binding of the E. coli toxin CcdB with its inhibitor. Predictions were subsequently validated by mutagenesis experiments.

Algorithms↗

PubMed2003

Thermodynamic effects of replacements of Pro residues in helix interiors of maltose-binding protein.

Introduction of Pro residues into helix interiors results in protein destabilization. It is currently unclear if the converse substitution (i.e., replacement of Pro residues that naturally occur in helix interiors would be stabilizing). Maltose-binding protein is a large 370-amino acid protein that contains 21 Pro residues. Of these, three nonconserved residues (P48, P133, and P159) occur at helix interiors. Each of the residues was replaced with Ala and Ser. Stabilities were characterized by differential scanning calorimetry (DSC) as a function of pH and by isothermal urea denaturation studies as a function of temperature. The P48S and P48A mutants were found to be marginally more stable than the wild-type protein. In the pH range of 5-9, there is an average increase in T(m) values of P48A and P48S of 0.4 degrees C and 0.2 degrees C, respectively, relative to the wild-type protein. The other mutants are less stable than the wild type. Analysis of the effects of such Pro substitutions in MBP and in three other proteins studied to date suggests that substitutions are more likely to be stabilizing if the carbonyl group i-3 or i-4 to the mutation site is not hydrogen bonded in the wild-type protein.

Amino Acid Substitution↗

PubMed2003

A gradient PCR-based screen for use in site-directed mutagenesis.

Site-directed mutagenesis is widely used to study protein and nucleic acid structure and function. Despite recent advancements in the efficiency of procedures for site-directed mutagenesis, the fraction of site-directed mutants by most procedures rarely exceeds 50% on a routine basis and is never 100%. Hence it is typically necessary to sequence two or three clones each time a site-directed mutant is constructed. We describe a simple and robust gradient-PCR-based screen for distinguishing site-directed mutants from the starting, unmutated plasmid. The procedure can use either purified plasmid DNA or colony PCR, starting from a single colony. The screen utilizes the primer used for mutagenesis and a common outside primer that can be used for all other mutants constructed with the same template. Over 30 site-specific mutants in a variety of templates were successfully screened and all of the mutations detected were subsequently confirmed by DNA sequencing. A single base pair mismatch could be detected in an oligonucleotide of 36 bases. Detection efficiency was relatively independent of starting template concentration and the nature of the outside primer used.

DNA Primers↗

PubMed2003

MODIP revisited: re-evaluation and refinement of an automated procedure for modeling of disulfide bonds in proteins.

There have been several attempts to stabilize proteins through the introduction of engineered disulfide bonds. For reasons that are currently unclear, these have met with mixed success. Hence identification of locations where introduction of a disulfide cross-link will lead to protein stabilization is still a challenging task. A computational procedure, MODIP, was introduced more than a decade ago to select sites in protein structures that have the correct geometry for disulfide formation when replaced by Cys. In this study, we re-evaluated the stereochemical criteria used by MODIP for the selection and gradation of sites for modeling disulfides. We introduced steric criteria to check for energetically unfavorable non-bonded contacts with the modeled disulfide, since these can considerably offset the stabilizing effect of the cross-link. The performance of the refined procedure was checked for its ability to correctly predict naturally occurring disulfide bonds in proteins. A set of proteins in which disulfide bonds were introduced experimentally were analyzed with respect to MODIP predictions, stability and other parameters such as accessibility, residue depth, B-factors of the mutated sites, change in volume upon mutation and loop length enclosed by the disulfide. The analysis suggests that in addition to proper stereochemistry, stabilizing disulfides occur in regions of low depth, relatively high mobility, have a loop length greater than 25 and where the disulfide typically occupies a volume less than or equal to that of the original residues.

Computational Biology↗

PubMed2002

Elucidation of factors responsible for enhanced thermal stability of proteins: a structural genomics based study.

Understanding the molecular basis for the enhanced stability of proteins from thermophiles has been hindered by a lack of structural data for homologous pairs of proteins from thermophiles and mesophiles. To overcome this difficulty, complete genome sequences from 9 thermophilic and 21 mesophilic bacterial genomes were aligned with protein sequences with known structures from the protein data bank. Sequences with high homology to proteins with known structures were chosen for further analysis. High quality models of these chosen sequences were obtained using homology modeling. The current study is based on a data set of models of 900 mesophilic and 300 thermophilic protein single chains and also includes 178 templates of known structure. Structural comparisons of models of homologous proteins allowed several factors responsible for enhanced thermostability to be identified. Several statistically significant, specific amino acid substitutions that occur going from mesophiles to thermophiles are identified. Most of these are at solvent-exposed sites. Salt bridges occur significantly more often in thermophiles. The additional salt bridges in thermophiles are almost exclusively in solvent-exposed regions, and 35% are in the same element of secondary structure. Helices in thermophiles are stabilized by intrahelical salt bridges and by an increase in negative charge at the N-terminus. There is an approximate decrease of 1% in the overall loop content and a corresponding increase in helical content in thermophiles. Previously overlooked cation-pi interactions, estimated to be twice as strong as ion-pairs, are significantly enriched in thermophiles. At buried sites, statistically significant hydrophobic amino acid substitutions are typically consistent with decreased side chain conformational entropy.

Archaeal Proteins↗

PubMed2002

A procedure for detection and quantitation of cavity volumes proteins. Application to measure the strength of the hydrophobic driving force in protein folding.

Accurate identification of cavities is important in the study of protein structure, stability, design, and ligand binding. Identification and quantitation of cavities is a nontrivial problem because most cavities are connected to the protein exterior. We describe a computational procedure for quantitating cavity volumes and apply this to derive an estimate of the hydrophobic driving force in protein folding. A grid-based Monte Carlo procedure is used to position water molecules on the surface of a protein. A Voronoi procedure is used to identify and quantitate empty space within the solvated protein. Additional cavities not detected by other existing procedures can be identified. Most of these are close to surface concavities. Residue volumes for both the interior and the surface residues as well as cavity volumes are in good agreement with volumes calculated from fully hydrated protein structures obtained from molecular dynamic simulations. We show that the loss of stability because of cavity-creating mutations correlates better with cavity volumes determined by this procedure than with cavity volumes determined by other methods. Available structural and thermodynamic data for a number of cavity-containing mutants were analyzed to obtain estimates of 26.1 cal x mol(-1) x A(-3) and 18.5 cal x mol(-1) x A(-2) for the relative contributions of cavity formation and the hydrophobic effect to the observed stability changes. The present estimate for the hydrophobic driving force is at the lower end of estimates derived from model compound studies and considerably lower than previous estimates of approximately 50 cal x mol(-1) x A(-2) derived from protein mutational data. In the absence of structural rearrangement, on average, deletion of a single methylene group is expected to result in losses in stability of 0.41 and 0.70 kcal x mol(-1) resulting from decrease in hydrophobicity and packing, respectively.

Bacterial Proteins↗