PubMed Health⌕ Search

Biomedical subjects

Ray H Baughman

Publications and source records attributed to Ray H Baughman.

18 recordsLinked to original sources
PubMed2006

Fuel-powered artificial muscles.

Artificial muscles and electric motors found in autonomous robots and prosthetic limbs are typically battery-powered, which severely restricts the duration of their performance and can necessitate long inactivity during battery recharge. To help solve these problems, we demonstrated two types of artificial muscles that convert the chemical energy of high-energy-density fuels to mechanical energy. The first type stores electrical charge and uses changes in stored charge for mechanical actuation. In contrast with electrically powered electrochemical muscles, only half of the actuator cycle is electrochemical. The second type of fuel-powered muscle provides a demonstrated actuator stroke and power density comparable to those of natural skeletal muscle and generated stresses that are over a hundred times higher.

Artificial Organs↗
PubMed2005

Importance of aromatic content for peptide/single-walled carbon nanotube interactions.

We have previously demonstrated that a designed amphiphilic peptide helix, denoted nano-1, coats and debundles single-walled carbon nanotubes (SWNTs) and promotes the assembly of these coated SWNTs into novel hierarchical structures via peptide-peptide interactions. The purpose of this study is to better understand how aromatic content impacts interactions between peptides and SWNTs. We have designed a series of peptides, based on the nano-1 sequence, in which the aromatic content is systematically varied. Atomic force microscopy measurements and optical absorption spectroscopy reveal that the ability to disperse individual SWNTs increases with increasing aromatic residues in the peptide. Altogether, the results indicate that pi-stacking interactions play an important role in peptide dispersion of SWNTs.

Hydrocarbons, Aromatic↗
PubMed2005

Strong, transparent, multifunctional, carbon nanotube sheets.

Individual carbon nanotubes are like minute bits of string, and many trillions of these invisible strings must be assembled to make useful macroscopic articles. We demonstrated such assembly at rates above 7 meters per minute by cooperatively rotating carbon nanotubes in vertically oriented nanotube arrays (forests) and made 5-centimeter-wide, meter-long transparent sheets. These self-supporting nanotube sheets are initially formed as a highly anisotropic electronically conducting aerogel that can be densified into strong sheets that are as thin as 50 nanometers. The measured gravimetric strength of orthogonally oriented sheet arrays exceeds that of sheets of high-strength steel. These nanotube sheets have been used in laboratory demonstrations for the microwave bonding of plastics and for making transparent, highly elastomeric electrodes; planar sources of polarized broad-band radiation; conducting appliqués; and flexible organic light-emitting diodes.

Journal Article↗
PubMed2005

Diameter-selective solubilization of single-walled carbon nanotubes by reversible cyclic peptides.

We have utilized reversible cyclic peptides (RCPs)-peptides containing alternating l- and d-amino acids with N- and C-termini derivatized with thiol-containing groups allowing reversible peptide cyclization-to solubilize and noncovalently functionalize carbon single-walled nanotubes (SWNTs) in aqueous solution. Solubilization occurs through wrapping of RCPs around the circumference of a SWNT, followed by the formation of head-to-tail covalent bonds, yielding closed rings on the nanotubes. By controlling the length of the RCPs, we have demonstrated limited diameter-selective solubilization of the SWNTs as revealed by UV/vis/NIR and Raman spectroscopies, as well as atomic force microscopy.

Amino Acids↗
PubMed2004

Multifunctional carbon nanotube yarns by downsizing an ancient technology.

By introducing twist during spinning of multiwalled carbon nanotubes from nanotube forests to make multi-ply, torque-stabilized yarns, we achieve yarn strengths greater than 460 megapascals. These yarns deform hysteretically over large strain ranges, reversibly providing up to 48% energy damping, and are nearly as tough as fibers used for bulletproof vests. Unlike ordinary fibers and yarns, these nanotube yarns are not degraded in strength by overhand knotting. They also retain their strength and flexibility after heating in air at 450 degrees C for an hour or when immersed in liquid nitrogen. High creep resistance and high electrical conductivity are observed and are retained after polymer infiltration, which substantially increases yarn strength.

Journal Article↗
PubMed2004

Highly effective sulfated zirconia nanocatalysts grown out of colloidal silica at high temperature.

A large surface-to-volume ratio is a prerequisite for highly effective catalysts. Making catalysts in the form of nanoparticles provides a good way to achieve the aim. However, agglomeration of nanoparticles during the preparation and utilization of nanocatalysts remains a formidable problem. Here, we present a novel approach in which nano units of catalysts are formed in the matrix of a colloidal carrier, with assistance of a cross-linking agent, and then grow out of the carrier upon calcination at high temperature. This ensures that the catalysts not only do not agglomerate, but also have a low cost and high catalytic efficiency due to the large surface-to-volume ratio and the absence of carbon deposition. The technique is demonstrated by the successful preparation of a binary nanocatalyst that consists of a silica nanoparticle core and a sulfated zirconia (SZ) nanocrystal shell (JML-1). The synthesis was achieved by converting sulfated zirconia (SZ) and silica solutions into a composite gel by means of sol-gel processing in the presence of triethoxysilane as the cross-linking agent, followed by heating at 50 degrees C and calcining at 550 degrees C. Relative to other catalysts, such as pure SZ, non-nanodispersed SZ over silica (SZ/SiO2), and zeolites Y, Beta, and ZSM-5, JML-1 exhibits superior catalytic activity in many reactions. For example, the activity of JML-1 in the production of gasoline by alkylation of 1-butene with isobutene remained at 95% or higher after 20 h of reaction and was over 90% after being regenerated five times. In sharp contrast, SZ and SZ/SiO2 give a high activity only for 2 h and the initial activity of zeolites Beta and ZSM-5 are about 88 and 60%, respectively. These findings demonstrate that non-agglomerated nanoparticles anchored onto a carrier surface can be prepared and the technique provides a versatile route to new highly effective nanocatalyst systems.

Journal Article↗
PubMed2004

Preparation and characterization of individual peptide-wrapped single-walled carbon nanotubes.

Two challenges for effectively exploiting the remarkable properties of single-walled carbon nanotubes (SWNTs) are the isolation of intact individual nanotubes from the raw material and the assembly of these isolated SWNTs into useful structures. In this study, we present atomic force microscopy (AFM) evidence that we can isolate individual peptide-wrapped SWNTs, possibly connected end-to-end into long fibrillar structures, using an amphiphilic alpha-helical peptide, termed nano-1. Transmission electron microscopy (TEM) and well-resolved absorption spectral features further corroborate nano-1's ability to debundle SWNTs in aqueous solution. Peptide-assisted assembly of SWNT structures, specifically in the form of Y-, X-, and intraloop junctions, was observed in the AFM and TEM images.

Hot Temperature↗
PubMed2003

Controlled assembly of carbon nanotubes by designed amphiphilic Peptide helices.

Carbon nanotubes have properties potentially useful in diverse electrical and mechanical nanoscale devices and for making strong, light materials. However, carbon nanotubes are difficult to solubilize and organize into architectures necessary for many applications. In the present paper, we describe an amphiphilic alpha-helical peptide specifically designed not only to coat and solubilize carbon nanotubes, but also to control the assembly of the peptide-coated nanotubes into macromolecular structures through peptide-peptide interactions between adjacent peptide-wrapped nanotubes. The data presented herein show that the peptide folds into an amphiphilic alpha-helix in the presence of carbon nanotubes and disperses them in aqueous solution by noncovalent interactions with the nanotube surface. Electron microscopy and polarized Raman studies reveal that the peptide-coated nanotubes assemble into fibers with the nanotubes aligned along the fiber axis. Most importantly, the size and morphology of the fibers can be controlled by manipulating solution conditions that affect peptide-peptide interactions.

Amino Acid Sequence↗
PubMed2003

V2O5 nanofibre sheet actuators.

Vanadium oxides, such as V2O5, are promising for lithium-ion batteries, catalysis, electrochromic devices and sensors. Vanadium oxides were proposed more than a decade ago for another redox-dependent application: the direct conversion of electrical energy to mechanical energy in actuators (artificial muscles). Although related conducting polymer and carbon nanotube actuators have been demonstrated, electromechanical actuators based on vanadium oxides have not be realized. V2O5 nanofibres and nanotubes provide the potential advantages of low-cost synthesis by sol-gel routes and high charging capacity and long cycle life. Here, we demonstrate electromechanical actuation for obtained high modulus V2O5 sheets comprising entangled V2O5 nanofibres. The high surface area of these V2O5 sheets facilitates electrochemical charge injection and intercalation that causes the electromechanical actuation. We show that the V2O5 sheets provide high Young's modulus, high actuator-generated stress, and high actuator stroke at low applied voltage.

Journal Article↗
PubMed2002

Dimensional changes as a function of charge injection in single-walled carbon nanotubes.

Motivated by the central importance of charge-induced dimensional changes for carbon nanotube electromechanical actuators, we here predict changes in nanotube length and diameter as a function of charge injection for armchair and zigzag nanotubes having different diameters. Density functional theory with periodic boundary conditions is used, which we show provides results consistent with experimental observations for intercalated graphites. Strain-versus-charge relationships are predicted from dimensional changes calculated with a uniform background charge ("jellium") for representing the counterions. These jellium calculations are consistent with presented calculations that include specific counterions for intercalated graphite, showing that hybridization between the ions and the graphite sheets is unimportant. The charge-strain relationships calculated with the jellium approximation for graphite and isolated single-walled nanotubes are asymmetric with respect to the sign of charge transfer. The dependence of nanotube strain on charge approaches that for a graphite sheet for intermediate-sized metallic nanotubes and for larger diameter semiconducting nanotubes. However, the strain-charge curves strongly depend on nanotube type when the nanotube diameter is small. This reflects both the dependence of the frontier orbitals for the semiconducting nanotubes on the nanotube type and the pi-sigma mixing when the nanotube diameter is small.

Journal Article↗
PubMed2002

Carbon nanotubes--the route toward applications.

Many potential applications have been proposed for carbon nanotubes, including conductive and high-strength composites; energy storage and energy conversion devices; sensors; field emission displays and radiation sources; hydrogen storage media; and nanometer-sized semiconductor devices, probes, and interconnects. Some of these applications are now realized in products. Others are demonstrated in early to advanced devices, and one, hydrogen storage, is clouded by controversy. Nanotube cost, polydispersity in nanotube type, and limitations in processing and assembly methods are important barriers for some applications of single-walled nanotubes.

Journal Article↗