PubMed Health⌕ Search

Biomedical subjects

Ray J Butcher

Publications and source records attributed to Ray J Butcher.

At least 19 recordsLinked to original sources

Synthesis and characterization of a spin crossover iron(II)-iron(III) mixed valence supramolecular pseudo-dimer exhibiting chiral recognition, hydrogen bonding, and pi-pi interactions.

Reaction of iron(II) and the 3 : 1 Schiff base condensate of 5-methylpyrazole-3-carboxaldehyde and tris(2-aminoethyl)amine in air gives a pseudo-dimer complex with a triple helix structure made of Delta-Delta and Lambda-Lambda pairings of spin crossover iron(II) and low spin iron(III) cations that are held together by three pi-pi and hydrogen bonding interactions.

Journal Article↗

Stereocontrolled formation of ketomethylene isosteres through tandem chain extension reactions.

A zinc-mediated chain extension reaction is the key step in the preparation of gamma-keto amides derived from amino acids. The use of tandem reaction sequences, in which the intermediate zinc enolate is trapped with electrophilic reagents, results in the incorporation of alpha-substituents, which mimic the side chains found in natural amino acid systems. Use of the chiral amino acid L-proline as a stereo-directing element provides a diastereoselective route to various ketomethylene isosteres.

Ketones↗

Studies of a dinuclear manganese complex with phenoxo and bis-acetato bridging in the Mn2(II,II) and Mn2(II,III) states: Coordination structural shifts and oxidation state control in bridged dinuclear complexes.

The dinucleating ligand, 2,6-bis{[(2-(2-pyridyl)ethyl)(2-pyridylmethyl)-amino]-methyl}-4-methylphenol) (L1OH) reacts with Mn(ClO4)2.6H2O to form the dinuclear complex [Mn2(II,II)(L1O)(mu-OOCCH3)2]ClO4 (1). The electrolytic oxidation of 1 at 0.7 V (vs Ag/AgCl) produces the mixed valent complex [Mn2(II,III)(L1O)(mu-OOCCH3)2](ClO4)2 (1ox) quantitatively, while electrolysis at 0.20 V converts 1ox back to 1. X-ray crystallographic structures show that both 1 and 1ox are dinuclear complexes in which the two manganese ions are each in distorted octahedral coordination environments bridged by the phenoxo oxygen and two acetate ions. The structural changes that occur upon the oxidation 1 to 1ox suggest an extended pi-bonding system involving the phenoxo ring C-O(phenoxo)-Mn(II)-N(pyridyl) chain. In addition, as 1 is oxidized to 1ox, the rearrangements in the coordination sphere resulting from the oxidation of one Mn(II) ion to Mn(III) are transmitted via the bridging Mn-O(phenoxo) bonds and cause structural changes that render the site of the second manganese ion unfit for the +3 state and hence unstable to reduction. Thus the electrolytic oxidation of 1ox in acetonitrile at 1.20 V takes up slightly greater than 1 F of charge/mol of 1ox, but the starting complex, 1ox, is recovered, showing the instability of the Mn2(III,III) state that is formed with respect to reduction to 1ox. Variable-temperature magnetic susceptibility measurements of 1 and 1ox over the temperature range from 1.8 to 300 K can be modeled with magnetic coupling constants J = -4.3 and -4.1 cm(-1), respectively showing the weak antiferromagnetic coupling between the two manganese ions in each dinuclear complex, which is commonly observed among similar phenoxo- and bis-1,3-carboxylato-bridged dinuclear Mn2(II,II) and Mn2(II,III) complexes.

Crystallography, X-Ray↗

Sterically encumbered acyclic diphosphazanes: synthesis, conformations and coordination behavior.

The reaction between lambda3-diphosphazane [EtN(PCl2)2] and the sodium salts of substituted phenols affords sterically encumbered diphosphazanes [EtN{P(OR)2}2] (R = -C6H3iPr2-2,6 (1), -C6H3Me2-2,6 (2) and -C6H2Me3-2,4,6 (3)). When the same reaction was carried out with bulky sodium 2,4-di-tert-butyl-4-methylphenoxide, only a monosubstitution takes place to result in the formation of [EtN{PCl(OR)}2] (R = -C6H2tBu2-2,6-Me-4) (4). Further reaction of 2 with [Mo(CO)4(NBD)] produces cis-[(EtN{P(OC6H3Me2-2,6)2}2)Mo(CO)4] (5). Diphosphazanes 1-4 and the metal derivative 5 have been characterized by means of their analytical data and EI-MS, IR and multinuclear NMR (1H and 31P) spectral data. The solid-state structure of the diphosphazanes 1, 2 and 4, and the molybdenum complex 5 have been determined by X-ray diffraction studies. Irrespective of the size of substituent, the bulky groups on the phosphorus and nitrogen are on the same side of the P-N-P skeleton with a local C2v symmetry. The central nitrogen remains almost trigonal planar in all the compounds.

Journal Article↗

Synthesis and characterization of manganese(II) and iron(III) d5 tripodal imidazole complexes. Effect of oxidation state, protonation state and ligand conformation on coordination number and spin state.

The 1 : 3 Schiff base condensates of tris(2-aminoethyl)amine (tren) or tris(3-aminopropyl)amine (trpn) with 4-methyl-5-imidazolecarboxaldehyde, H3L1 and H3L2, respectively, were generated in situ and used to prepare complexes with manganese(II) and iron(III). The resultant complexes, [MnH3L1](ClO4)2, [MnH3L1](ClO4)2.EtOH.H2O, [MnH3L2](ClO4)2, [FeH3L1](ClO4)3.1.5(EtOH) and [FeHL1](I3) (0.525)(I)(0.475).2.625H2O, have been characterized by EA, IR, ES MS, variable temperature magnetic susceptibility, X-ray crystallography, and Mössbauer spectroscopy for the iron complexes. The three manganese(II) complexes are high spin with [MnH3L2](ClO4)2 exhibiting coordination number seven while the others are six coordinate. [FeH3L1](ClO4)3.1.5(EtOH) has two iron sites, a seven coordinate and a pseudo seven coordinate site. The complex is high spin at room temperature but exhibits a magnetic moment that decreases with temperature corresponding to conversion of one of the sites to low spin. [FeHL1](I3) (0.525)(I)(0.475).2.625H2O is low spin even at room temperature. In the present complexes the apical nitrogen atom, N(ap), of the tripodal ligand is pyramidal and directed toward the metal atom. The data show that the M-N(ap) distance decreases as the oxidation state of the metal increases, as the number of bound imidazole protons on the ligand increases, and as the number of carbon atoms in the backbone of the ligand (tren vs. trpn) increases. In a limiting sense, short M-N(ap) distances result in high spin seven coordinate mono capped octahedral complexes and long M-N(ap) distances result in low spin six coordinate octahedral complexes.

Crystallography, X-Ray↗

Self-activating nuclease activity of copper (II) complexes of hydroxyl-rich ligands.

Copper (II) complexes of Schiff bases derived from [1+1] condensation of salicylaldehyde, 2,3-dihydroxybenzaldehyde and 2,3,4-trihydroxybenzaldehyde with anthranilic acid (L1-L3) have been synthesized and characterized by elemental analyses, IR, UV-Vis spectra, room temperature magnetic susceptibility, electron paramagnetic resonance spectroscopy and cyclic voltammetry. The X-ray structure of [CuL1]n has been solved and refined to R = 0.0314. The crystals are monoclinic with space group P2(1) with cell constants a = 9.6820(13), b = 7.1446(11), c = 9.9315(13) A, beta = 98.385(8) degrees, Z = 2. The copper (II) ions are in a distorted tetrahedral environment sequentially bridged by carboxylate groups in the syn-anti conformation giving rise to a helix-like chain. The copper complexes with the inherent redox active hydroquinone functionality cleave plasmid pBR322 DNA without exogenous agents by a self-activating mechanism.

Antioxidants↗

o-hydroxylmethylphenylchalcogens: synthesis, intramolecular nonbonded chalcogen...OH interactions, and glutathione peroxidase-like activity.

[Structure: see text]. The synthesis and characterization of a series of organochalcogen (Se, Te) compounds derived from benzyl alcohol 13 are described. The synthesis of the key precursor dichalcogenides 15, 22, and 29 was achieved by the ortho-lithiation route. Selenide 18 was obtained by the reaction of the dilithiated derivative 14 with Se(dtc)2. Oxidation of 15 and 22 with H2O2 afforded the corresponding cyclic ester derivatives 17 and 24, respectively. Oxidation of selenide 18 with H2O2 affords the spirocyclic compound 19. The presence of intramolecular interactions in dichalcogenides 15 and 22 has been proven by single-crystal X-ray studies. The cyclic compounds 17 and 19 have also been characterized by single-crystal X-ray studies. GP(X)-like antioxidant activity of selenium compounds has been evaluated by the coupled bioassay method. Density functional theory calculations at the mPW1PW91 level on ditelluride 22 have identified a fairly strong nonbonding interaction between the hydroxy oxygen and tellurium atom. The second-order perturbation energy obtained through NBO analysis conveys the involvement of n(O) --> sigma(Te-Te) orbital overlap in nonbonding interaction. Post wave function analysis with the Atoms in Molecules (AIM) method identified distinct bond critical point in 15 and 22 and also indicated that the nonbonding interaction is predominantly covalent. Comparison between diselenide 15 and ditelluride 22 using the extent of orbital interaction as well as the value of electron density at the bond critical points unequivocally established that a ditelluride could be a better acceptor in nonbonding interaction, when the hydroxy group acts as the donor.

Chalcogens↗

Enaminones 9. Further studies on the anticonvulsant activity and potential type IV phosphodiesterase inhibitory activity of substituted vinylic benzamides.

Structure-activity relationship studies were employed to synthesize a series of 3- and 3,4-substituted benzamides from 3-amino-2-cyclohexenones. An improved method for the synthesis of benzamides from 3-amino-2-cyclohexenones is presented which provided significantly higher yields (71-79%) for the reported compounds. NMR and X-ray structural analyses were undertaken to note the possible intra- and intermolecular interactions of the synthesized analogs. Molecular modeling studies were used to determine the minimized configuration and were compared to their X-ray structures for correlation. These new entities were evaluated as potential anticonvulsants and type IV phosphodiesterase inhibitors (PDE4).

3',5'-Cyclic-AMP Phosphodiesterases↗

Synthesis and characterization of seven-coordinate tripodal imidazole complexes of iron(II) and manganese(II).

The iron(II) and manganese(II) complexes of the N(7) Schiff-base condensate of tris(3-aminopropyl)amine with 1-methyl-2-imidazolecarbaldehyde and the manganese(II) complex of the N(7) Schiff-base condensate of tris(3-aminopropyl)amine with 4-imidazolecarbaldehyde are high-spin mono capped octahedral seven-coordinate complexes with a short, approximately 2.44 è, metal to apical nitrogen bond.

Journal Article↗

Non-interpenetrating transition metal diorganophosphate 2-dimensional rectangular grids from their 1-dimensional wires: structural transformations under mild conditions.

The manganese, cobalt, and cadmium complexes [M(dtbp)2]n (M = Mn (1) and Co 2) and [Cd(dtbp)2(H2O)]n (3) (dtbp = di-tert-butyl phosphate), which exist as one-dimensional molecular wires, transform to non-interpenetrating rectangular grids [M(dtbp)2(bpy)2.2H2O]n (M = Mn (4), Co (5), and Cd (6)) by the addition of 4,4-bipyridine (bpy) at room temperature. Products 4-6 have also been prepared by a room-temperature reaction or by solvothermal synthesis in methanol through a direct reaction between the metal acetate, di-tert-butyl phosphate, and 4,4'-bipyridine (bpy) in a 1:2:2 molar ratio. Single-crystal X-ray structure determination of 4-6 shows that these compounds are composed of octahedral transition metal ions woven into a two-dimensional grid structure with the help of bpy spacer ligands. The axial coordination sites at the metal are occupied by bulky unidentate dtbp ligands, which prevent any interpenetration of the individual grids. The change of reaction conditions from solvothermal to hydrothermal, for the attempted synthesis of a magnesium grid structure, however leads to the isolation of an organic phosphate [(H2bpy)(H2PO4)2] (7) and an inorganic phosphate [Mg(HPO4)(OH2)3] (8). Compound 7 can also be prepared quantitatively from a direct reaction between bpy and H3PO4. The new organic phosphate 7 is a unique example of a phosphate material with alternating layers of [H2bpy]2+ cations and [H2PO4]- anions that are held together by hydrogen bonds. Solid-state thermal decomposition of 4-6 produced the respective metaphosphate materials [M(PO3)2] (M = Mn (9), Co (10), and Cd (11)). All new metal-organic phosphates have been characterized by elemental analysis, thermal analysis (TGA, DTA, DSC), and IR and NMR spectroscopy. The metaphosphate ceramic materials were characterized by IR spectral and powder X-ray diffraction studies.

Journal Article↗

Copper(II) mediated anion dependent formation of Schiff base complexes.

A tetranuclear mixed ligand copper(II) complex of a pyrazole containing Schiff base and a hydroxyhexahydropyrimidylpyrazole and copper(II) and nickel(II) complexes of the Schiff base having N-donor atoms have been investigated. A 2 equiv amount of 5-methyl-3-formylpyrazole (MPA) and 2 equiv of 1,3-diamino-2-propanol (1,3-DAP) on reaction with 1 equiv of copper(II) nitrate produce an unusual tetranuclear mixed ligand complex [Cu4(L1)2(L2)2(NO3)2] (1), where H2L1 = 1,3-bis(5-methyl-3-formylpyrazolylmethinimino)propane-2-ol and HL2 = 5-methyl-3-(5-hydroxyhexahydro-2-pyrimidyl)pyrazole. In contrast, a similar reaction with nickel(II) nitrate leads to the formation of a hygroscopic intractable material. On the other hand, the reaction involving 2 equiv of MPA and 1 equiv each of 1,3-DAP and various copper(II) salts gives rise to two types of products, viz. [Cu(T3-porphyrinogen)(H2O)]X2 (X = ClO4, NO3, BF4 (2)) (T3-porphyrinogen = 1,6,11,16-tetraza-5,10,15,20-tetrahydroxy-2,7,12,17-tetramethylporphyrinogen) and [Cu(H2L1)X]X x H2O (X = Cl (3), Br (4)). The same reaction carried out with nickel(II) salts also produces two types of compounds [Ni(H2L1)(H2O)2]X2 [X = ClO4 (5), NO3 (6), BF4 (7)] and [Ni(H2L1)X2] x H2O [X = Cl (8), Br (9)]. Among the above species 1, 3, and 5 are crystallographically characterized. In 1, all four copper atoms are in distorted square pyramidal geometry with N4O chromophore around two terminal copper atoms and N5 chromophore around two inner copper atoms. In 3, the copper atom is also in distorted square pyramidal geometry with N4Cl chromophore. The nickel atom in 5 is in a distorted octahedral geometry with N4O2 chromophore, where the metal atom is slightly pulled toward one of the axial coordinated water molecules. Variable-temperature (300 to 2 K) magnetic susceptibility measurements have been carried out for complex 1. The separations between the metal centers, viz., Cu(1)...Cu(2), Cu(2)...Cu(2)A, and Cu(2)A...Cu(1)A are 3.858, 3.89, and 3.858 A, respectively. The overall magnetic behavior is consistent with strong antiferromagnetic interactions between the spin centers. The exchange coupling constants between Cu(1)...Cu(2) and Cu(2)...Cu(2A) centers have turned out to be -305.3 and -400.7 cm(-1), respectively, resulting in a S = 1/2 ground state. The complexes are further characterized by UV-vis, IR, electron paramagnetic resonance, and electrochemical studies.

Journal Article↗

Intramolecular interactions between chalcogen atoms: organoseleniums derived from 1-bromo-4-tert-butyl-2,6-di(formyl)benzene.

[structure: see text] The synthesis and characterization of a series of low-valent organoselenium compounds derived from 1-bromo-4-tert-butyl-2,6-di(formyl)benzene (22) is described. The synthesis of diselenide 25 was achieved by the lithiation route whereas bis(4-tert-butyl-2,6-di(formyl)phenyl) diselenide (26) was synthesized by treating 22 with disodium diselenide. A series of monoselenides (27, 28, and 29) was obtained by facile nucleophilic substitution of bromine in 22, using the corresponding selenolates as nucleophiles. The halogenation reactions of bis(4-tert-butyl-2,6-di(formyl)phenyl) diselenide (26) did not afford the corresponding selenenyl halides but resulted in the isolation of an unexpected cyclic selenenate ester 34 as a product. The selenide 32 was synthesized by the treatment of dimethoxymethyl diselenide with trilithiated 2-bromo-5-tert-butyl-N,N'-di(phenyl)isophthalamide. The existence of potential Se...O intramolecular nonbonding interactions was examined by IR, (1)H, and (77)Se NMR spectroscopy, X-ray crystallography, and computational studies. The X-ray crystal structures of 26 and 27, having two ortho formyl groups, reveal the absence of any Se...O interactions. However, the Se...O interactions were observed in the selenenate ester 34 where one of the formyl groups has been utilized for the selenenate ring formation. The crystal structures of 26 and 27 exhibited intermolecular short-range C-H...Se interactions (hydrogen bonding). Although there are four heteroatoms in carbamoyl moieties ortho to selenium capable of forming a five-membered ring on intramolecular coordination, no such intramolecular Se...X (X = N, O) interaction was observed in the crystal structure of 32. The density functional theory calculations at the B3LYP/6-31G* level predicted that for all the diformyl systems (47a-c, 48a-c), the anti,anti conformer (when both formyl oxygen atoms point away from the selenium) is more stable. This preference was found to be reversed in the monoformyl-substituted systems (50a,b, 51a,b), where the syn conformer (when formyl oxygen is near the selenium) is energetically more favorable than the anti conformer.

Journal Article↗

Oxabicyclo[3.2.1]octane derivatives as highly reactive dienophiles: synthesis of bicyclo[5.n.0] systems.

[reaction: see text] We have developed highly versatile, homochiral oxabicyclo[3.2.1]octadiene building blocks for the synthesis of natural products. We have found that these bridged alkenes undergo exceptionally facile Diels-Alder reactions and react faster than several well studied bicyclo[2.2.1]heptene dienophiles. The reaction proceeds with high levels of stereochemical control and in very good to excellent yields, providing access to bicyclo[5.4.0]undecane and bicyclo[5.3.0]decane systems. This reactivity is attributed to strain and homoconjugation effects.

Journal Article↗

A family of decamethylmetallocene charge-transfer salt magnets using methyl tricyanoethylenecarboxylate (MTCE) as the electron acceptor.

Methyl tricyanoethylenecarboxylate, MTCE, has been used as a one-electron acceptor building block for the synthesis of isomorphous decamethylmetallocene charge-transfer salt magnets of the formula [MCp*2][MTCE], M = Cr, Mn, and Fe. Functionally and electrochemically, MTCE is a hybrid between tetracyanoethylene (TCNE) and dimethyl dicyanofumarate (DMeDCF), two acceptors that have previously been found to support ferromagnetism. The X-ray crystal structure of the chromium analogue, [CrCp*2][MTCE], shows it to exist in the expected mixed stack structure in the orthorhombic space group Pnma with a = 14.739(3) A, b = 10.7869(19) A, and c = 15.771(3) A and Z = 4. As anticipated, all three family members exhibit dominant ferromagnetic coupling, which is presumed to reflect intrastack interactions. However, the bulk magnetic properties mostly differ from simple interpolations or extrapolations of the properties of their TCNE and DMeDCF analogues. Density functional theory calculations have been used to shed some light on this observation.

Journal Article↗

Synthesis and structure of mercurous ion and dinuclear lead(II) complexes of the 28-membered selenaaza macrocycle: dominance of the chelate ring size effect and conformational requirement over soft-soft interactions.

The flexible and larger ring size macrocycle 4 (C(36)H(46)N(6)Se(2)) afforded stable complex 5 [Hg(2)(PF(6))(2)[C(36)H(46)N(6)Se(2)]] on treatment with 1 equiv of mercuric acetate followed by addition of NH(4)PF(6). The reaction of Pb(OCOCH(3))(2).4H(2)O with 4 followed by treatment with NH(4)PF(6) resulted in a dinuclear lead complex (6) [Pb(2)(PF(6))(2)(OCOCH(3))(2)[C(36)H(46)N(6)Se(2)]]. The crystal structures of complexes 5 and 6 are described: C(36)H(46)F(12)Hg(2)N(6)P(2)Se(2) a = 9.5106(5) A, b = 11.5222(6) A, c = 11.8161(6) A, alpha = 115.6110(10) degrees , beta = 96.5190(10) degrees , gamma = 106.2910(10) degrees , monoclinic, P, Z =1; C(44)H(57)F(12)N(8)O(4)P(2)Pb(2)Se(2) a = 9.4668(5) A, b = 11.9937(6) A, c = 25.2319(14) A, alpha = 102.4130(10) degrees , beta = 97.6130(10) degrees , gamma = 94.8540(10) degrees , monoclinic, P, Z = 2. The crystal structure of 5 revealed that Hg(2)(2+) is trapped inside the cavity of the macrocycle. The geometry around the mercurous ion is antiprismatic with Hg(2)(2+) coordinating to six nitrogen atoms forming four five-membered rings, and there is no interaction between the mercurous ion and the selenium donor atoms. The single crystal X-ray crystal structure of 6 indicates a distorted octahedral geometry around each lead atom in the cavity of the macrocycle due to presence of the sterochemically active lone pair on Pb(II). The octahedral geometry around each Pb(II) is satisfied by coordination to 3 nitrogen atoms, two oxygen atoms of the chelating acetate group, and bridging of one of the oxygen atoms of the nearby acetate.

Journal Article↗

Bi- and trinuclear copper(II) complexes of a sterically constrained phenol-based tetradentate ligand: syntheses, structures, and magnetic studies.

Copper(II) complexes (1-3) of a sterically constrained phenol-based tetradentate N(2)O(2) ligand 1,4-bis(2-hydroxy-3,5-dimethylbenzyl)piperazine (H(2)L) have been reported. The associated anions of the copper(II) ion precursors have profound influence on the stoichiometry of the products. Thus, with perchlorate ion, the product is a binuclear compound [Cu(2)L(2)] (1), while with coordinating anions viz. Cl(-) and N(3)(-), the products [Cu(3)L(2)Cl(2)(H(2)O)].1/2H(2)L (2) and [Cu(3)L(2)(N(3))(2)(CH(3)OH)].4H(2)O (3) have triangulo trinuclear composition. The syntheses, X-ray structures, and spectroscopic and magnetic properties of these complexes are described. Compound 1 has a noncentrosymmetric structure with a rectangular Cu(2)(OPh)(2) core. It appears to be a rare example of a phenolato-bridged Cu(II) dimer exhibiting ferromagnetic interactions (J = 0.93 cm(-)(1)), a behavior in agreement with the theoretical predictions but seldom observed experimentally. In compounds 2 and 3, the copper centers are triangularly disposed, and the molecules have a shape much like that of a butterfly. The terminal copper centers Cu(1) and Cu(2) in 2 and 3 have distorted square pyramidal geometry, connected to each other by a bridging chloro- (in 2) or azido ligand (in 3) in "end to end" fashion. The central copper center (Cu(3) in 2 and Cu in 3) in both the compounds has distorted square planar geometry. The separations between the metal centers, viz. Cu(1)...Cu(2), Cu(2)...Cu(3), and Cu(3)...Cu(1), are 4.826, 3.214, and 3.244 A, respectively, in 2. The corresponding distances in 3 are 5.590, 3.178, and 3.485 A, respectively. The overall magnetic behaviors in 2 and 3 are consistent with antiferromagnetic interactions between the spin centers. In 3, the exchange couplings between the terminal and central copper centers J(Cu(1))(-)(Cu) and J(Cu(2))(-)(Cu) appear to be equal (-234 cm(-)(1)), resulting in an S = (1)/(2) ground state at temperatures near or below 77 K.

Journal Article↗

New route to the mixed valence semiquinone-catecholate based mononuclear FeIII and catecholate based dinuclear MnIII complexes: first experimental evidence of valence tautomerism in an iron complex.

The semiquinone-catecholate based mixed valence complex, [FeIII(bispicen)(Cl4Cat)(Cl4SQ)] x DMF (1), and catecholate based (H2bispictn)[Mn2III(Cl4Cat)4(DMF)2] (2) (bispicen = N,N'-bis(2-pyridylmethyl)-1,2-ethanediamine, bispictn = N,N'-bis(2-pyridylmethyl)-1,3-propanediamine, Cl4Cat = tetrachlorocatecholate dianion, and Cl4SQ = tetrachlorosemiquinone radical anion) were synthesized directly utilizing a facile route. Both the complexes have been characterized by single crystal X-ray diffraction study. The electronic structures have been elucidated by UV-vis-NIR absorption spectroscopy, cyclic voltammetry, EPR, and magnetic properties. The structural as well as spectroscopic features support the mixed valence tetrachlorosemiquinone-tetrachlorocatecholate charge distribution in 1. The ligand based mixed valence state was further confirmed by the presence of an intervalence charge transfer (IVCT) band in the 1900 nm region both in solution and in the solid. The intramolecular electron transfer, a phenomenon known as valence tautomerism (VT), has been followed by electronic absorption spectroscopy. For 1, the isomeric form [FeIII(bispicen)(Cl4Cat)(Cl4SQ)] is favored at low temperature, while at an elevated temperature, the [FeII(bispicen)(Cl4SQ)2] redox isomer dominates. Infrared as well as UV-vis-NIR spectral characterization for 2 suggest that the MnIII(Cat)2- moiety is admixed with its mixed valence semiquinone-catecholate isomer MnII(SQ)(Cat)-, and the electronic absorption spectrum is dominated by the mixed charged species. The origin of the intervalence charge transfer band in the 1900 nm range is associated with the mixed valence form, MnII(Cl4Cat)(Cl4SQ)-. The observation of VT in complex 1 is the first example where a mixed valence semiquinone-catecholate iron(III) complex undergoes intramolecular electron transfer similar to manganese and cobalt complexes.

Journal Article↗