PubMed Health⌕ Search

Biomedical subjects

Regis W Haid

Publications and source records attributed to Regis W Haid.

At least 19 recordsLinked to original sources
PubMed2007

Combined ventral and dorsal surgery for myelopathy and myeloradiculopathy.

The past decade has witnessed significant advances in the surgical treatment of cervical myelopathy and myeloradiculopathy. In this article, we discuss in detail the indications for combined ventral and dorsal surgery for the treatment of cervical myelopathy and myeloradiculopathy. In addition, the advances in surgical technique and instrumentation in cervical spine surgery are explored. Finally, complication avoidance and management strategies are discussed. Combined ventral and dorsal decompression, reconstruction, and instrumentation procedures are viable options in the treatment of a select group of patients with complex cervical myelopathy or myeloradiculopathy.

Decompression, Surgical↗
PubMed2006

Long-term magnetic resonance imaging evaluation of bioresorbable anterior cervical plate resorption following fusion for degenerative and traumatic disk disruption.

STUDY DESIGN: A retrospective magnetic resonance imaging (MRI) review of a series of patients who underwent a single-level anterior cervical discectomy and fusion followed by anterior plate stabilization using an anterior cervical resorbable mesh plate and screw system. OBJECTIVE: MRI evaluation of the long-term implant resorption properties of a bioresorbable anterior cervical plate and the adjacent peri-implant soft tissue environment. SUMMARY OF BACKGROUND DATA: The use of bioresorbable anterior cervical plates for immediate cervical stabilization following an anterior cervical discectomy and fusion presents several distinct advantages over metallic instrumentation. Bioresorbable polymers may diminish, by their resorbability, implant-related complications such as loosening, migration, and failure of instrumentation, as well as stress shielding of the underlying fusion. Information on the intermediate and long-term bony and soft tissue reaction to the resorption byproducts of these biomaterials is limited. METHODS: There were 9 consecutive patients who underwent single-level anterior cervical decompression and fusion using allograft cortical bone, followed by bioresorbable polylactide anterior mesh plate and screw fixation. Following institutional review board approval, 5 of the 9 patients agreed to postoperative MRI assessment of the peri-implant area. An independent radiologist then characterized implant degradation, and the presence of soft tissue inflammation and swelling during the resorption phase of the bioresorbable plate. RESULTS: At an average follow-up of 32 months, MRI assessment showed no evidence of soft tissue swelling or inflammation related to the resorption of a bioresorbable anterior plate in any of the 5 patients. In addition, none of the patients complained of any dysphagia or phonation difficulties. CONCLUSIONS: Based on MRI assessment, these devices, at more than 2-year follow-up, did not indicate any local chronic inflammation or swelling resulting from their degradation. Clinical symptoms of dysphagia or dysarthria, a common reported problem following anterior cervical spine procedures, were not observed in any patient.

Absorbable Implants↗
PubMed2006

Cervicomedullary compression and occipitocervical instability.

A wide variety of pathologic processes can involve the cervicomedullary junction leading to spinal cord compression and mechanical instability. Effective surgical management involves accurate patient selection, appropriate operative planning, and meticulous surgical technique. Many different options for decompression exist, each associated with a unique set of risks and benefits. Spinal stabilization has been enhanced greatly through the evolution of posterior occipitocervical instrumentation constructs. Careful attention to detail may decrease the incidence of potential complications and provide the surgeon with an effective management strategy to maximize clinical outcome.

Atlanto-Occipital Joint↗
PubMed2006

Comparison of CD HORIZON SPIRE spinous process plate stabilization and pedicle screw fixation after anterior lumbar interbody fusion. Invited submission from the Joint Section Meeting On Disorders of the Spine and Peripheral Nerves, March 2005.

OBJECT: The authors present the early clinical results obtained in patients who underwent SPIRE spinous process plate fixation following anterior lumbar interbody fusion (ALIF). METHODS: Between May 2003 and January 2005, 32 patients underwent titanium cage and bone morphogenetic protein-augmented ALIF and subsequent SPIRE (21 cases) or bilateral pedicle screw (BPS; 11 cases) fixation. Pedicle screws were implanted using either the open approach (three cases) or using a tubular retractor (eight cases). Patients' charts were reviewed for operative time, estimated blood loss (EBL), hospital length of stay (LOS), and evidence of pseudarthrosis or hardware failure. In SPIRE plate-treated patients, the median EBL (75 ml) was lower than in BPS-treated patients (open BPS [150 ml]; tubular BPS [125 ml]). The median operative time in SPIRE plate-treated patients was also shorter (164 minutes compared with 239 and 250 minutes in the open and tubular BPS, respectively). The median LOS was 3 days for both the SPIRE and tubular BPS groups, but 4 days in the open BPS group. There were no instances of major surgery-induced complication, pseudarthrosis, or hardware failure during mean follow-up periods of 5.5, 7.2, and 4.9 months in the SPIRE, open PS, and tubular BPS groups, respectively. CONCLUSIONS: The SPIRE plate is easy to implant and is associated with minimal operative risk. Compared with BPS/rod constructs, SPIRE plate fixation leads to less EBL and shorter operative time, without an increase in the rate of pseudarthrosis. Hospital LOS was also shorter in SPIRE plate-treated patients, which is consistent with the goals of minimal access spinal technologies.

Adult↗
PubMed2005

Current treatment strategies for the painful lumbar motion segment: posterolateral fusion versus interbody fusion.

STUDY DESIGN: Review of the literature. OBJECTIVES: We discuss the indications and contraindications for posterolateral lumbar fusion and posterior approaches to lumbar interbody fusion. We also review the advances in minimal access surgical techniques, graft materials, and osteobiologics. SUMMARY OF BACKGROUND DATA: Previously published data and our own surgical experience form the basis of this report. METHODS: A Pub Med online internet search for the keywords was performed. The pertinent articles were then cited. RESULTS: Posterior interbody fusion techniques have theoretical and demonstrable advantages over posterolateral fusion, but the former is also associated with greater morbidity. There are several approaches one may use to perform posterior interbody fusion, as well as multiple minimally invasive techniques and interbody spacer graft options. Bone morphogenetic protein offers an attractive alternative for achieving fusion. CONCLUSION: Fusion of painful motion segments is widely used to treat patients with degenerative low back pain. Successful arthrodesis may be achieved using either posterolateral fusion with pedicle screw fixation or posterior interbody fusion, depending on the patient's situation. These techniques may be accomplished with a variety of minimal access strategies and various graft and spacer technologies. The modern spine surgeon should be proficient in using all these options to treat the painful lumbar motion segment.

Humans↗
PubMed2005

Occipitocervical fixation: long-term results.

STUDY DESIGN: The study is a retrospective review of 58 patients who underwent occipitocervical fusion between 1997 and 2001. OBJECTIVES: Our objective is to study the clinical results after occipitocervical fixation with long-term follow-up and assess factors contributing to clinical success. METHODS: Data from patient charts, operative notes, physician office notes, and imaging studies were incorporated in the study. Myelopathy was assessed using a Nurick scale for preoperative and postoperative evaluation. Fusion was assessed using cervical plane films with flexion and extension views. RESULTS: Mean follow-up was 36 months, with all patients having a greater than 1-year follow-up. The most common pathology was congenital cranial settling (41%) followed by trauma (22%) and rheumatoid arthritis (17%). Myelopathy was the most common presentation (62%) followed by pain (28%). A successful fusion occurred in 48 out of 51 patients (94%). Symptoms improved in 86% of patients, whereas 35% improved 1 Nurick grade. Complications occurred in 30% of patients. The cervical wound infection rate was 5%. The rate of adjacent level degeneration was 7%. The mortality rate was 1.7%. CONCLUSIONS: Occipitocervical instrumentation allows for very high fusion rates without the need for halo vest immobilization. All patients with successful fixation have pain resolution. Myelopathy improves in most patients, whereas one-third of patients demonstrate dramatic improvement.

Adolescent↗
PubMed2005

Atlantoaxial fixation: overview of all techniques.

Over the past century, steady advances have been made in fixating an unstable atlantoaxial complex. Current options for fixation of the atlantoaxial complex include posterior clamps, posterior wiring techniques, C1-C2 transarticular screw fixation, posterior C1 lateral mass screw with C2 pars or pedicle screw fixation, and anterior transoral C1 lateral mass to C2 vertebral body fixation.

Atlanto-Axial Joint↗
PubMed2005

Transoral odontoidectomy.

The transoral approach for odontoidectomy is described in detail, and the operating room setup and surgical positioning are demonstrated. We also discuss our methods of retractor placement and techniques for optimal surgical exposure. The microsurgical technique used for decompression is presented in detail. The surgical pearls and pitfalls of transoral odontoidectomy, learned from a 70-case experience, are described and illustrated.

Functional Laterality↗
PubMed2004

Posterior cervical laminoplasty using a new plating system: technical note.

BACKGROUND: Laminoplasty is well described in the Japanese literature as a surgical option for treating ossification of the posterior longitudinal ligament (OPLL). The open door technique has gained increasing popularity in the United States and Europe to treat not only OPLL but also cervical stenotic myelopathy. An obstacle to its widespread use is the lack of a suitable fixation plate to adequately secure the fractured lamina to the lateral mass. Our objective was to demonstrate the advantages of a novel miniplate (Ti-Mesh LP system; Medtronic Sofamor Danek, Memphis, TN, USA) that is ideally suited for fixing the lamina to the lateral mass. METHODS: We used the Ti-Mesh LP miniplate system to perform laminoplasties on five patients, all male, with a mean preoperative Nurick score of 2.8. Four patients had congenital cervical stenosis with myelopathy and one had OPLL. Open door laminoplasties were performed on all patients. The plates were implanted with a claw positioned on the trapdoor lamina and a flat plate on the lateral mass. RESULTS: The system was implanted successfully in all patients. The mean number of levels fixated was 4.4. There were no intraoperative or postoperative complications after >5 months follow-up. CONCLUSIONS: The new Ti-Mesh LP cranial miniplate and screw system facilitates posterior cervical laminoplasty procedures by eliminating the need to contour cranial miniplates for use in the cervical spine. Its unique claw construct and angled design are ideal for holding a trapdoor laminoplasty in the open position. We have used this system successfully and without complications to perform decompressive posterior cervical laminoplasties in five patients.

Aged↗
PubMed2004

Contribution of recombinant human bone morphogenetic protein-2 to the rapid creation of interbody fusion when used in transforaminal lumbar interbody fusion: a preliminary report. Invited submission from the Joint Section Meeting on Disorders of the Spine and Peripheral Nerves, March 2004.

OBJECT: The authors compared fusion rates in transforaminal lumbar interbody fusion (TLIFs) when using either autograft or bone morphogenetic protein (BMP) placed in the interbody space. METHODS: Between September 2002 and December 2003, the authors performed 44 TLIF operations. Follow-up data were available for 40 patients. Of the 40 procedures, 19 involved cages filled with iliac crest autograft (Group 1) and 21 involved cages filled with a medium kit of recombinant human (rh) BMP-2 (Group 2). In all Group 2 patients, one BMP sponge was placed anterior to the cage and another was placed within the cage. In 12 of the Group 2 patients, iliac crest autograft was placed posterior to the BMP-filled cage (Group 2A). In the remaining nine Group 2 patients, only local autograft was placed posterior to the BMP-filled cage (Group 2B). Assessment of fusion was performed using dynamic radiography at 3-month intervals. Outcomes were assessed using the Prolo Scale, and iliac crest donor site pain was measured using a Visual Analog Scale (VAS). The mean follow-up period was 9 months (range 3-18 months). In Group 1 patients, one pseudarthrosis was detected. In Group 2 patients, dynamic radiography demonstrated solid fusion in all patients except one in Group 2B. Fifty-eight percent of patients in whom iliac crest autograft was used complained of donor site pain 6 months after surgery (5 of 10 points on the VAS). Symptomatic foraminal bone formation was not observed in any Group 2 patient. CONCLUSIONS: The use of rhBMP-2 is safe in TLIFs when the sponges are placed away from the dura mater, and BMP promotes a more rapid fusion than iliac crest autograft alone. The use of rhBMP-2 in combination with local autograft is an excellent option for promoting solid fusion with TLIF, and it eliminates the possibility of iliac donor site pain.

Adult↗
PubMed2004

Lumbar interbody fusion: state-of-the-art technical advances. Invited submission from the Joint Section Meeting on Disorders of the Spine and Peripheral Nerves, March 2004.

During the past few decades, three techniques have been used to achieve circumferential lumbar interbody fusion (LIF). They include posterior LIF, anterior LIF with supplemental posterior fixation, and transforaminal LIF. In this article, the authors describe the indications and contraindications for the use of interbody fusion. The advantages and disadvantages of each will be discussed in detail. Additionally, strategies for minimally invasive access and options for interbody spacer materials will be discussed.

Humans↗
PubMed2004

The future in the care of the cervical spine: interbody fusion and arthroplasty. Invited submission from the Joint Section Meeting on Disorders of the Spine and Peripheral Nerves, March 2004.

In the past 50 years tremendous advances have been made in the treatment of cervical disc disease with cervical fusion. Fusion rates have surpassed 95% after application of anterior cervical implants. Adjacent-segment degeneration, however, has plagued the long-term clinical success of cervical fusion. Cervical arthroplasty has been introduced to maintain cervical motion and potentially avoid or minimize adjacent-segment degeneration. If cervical arthroplasty is successful, the long-term results of surgery for cervical disc disease may improve; however, there are associated drawbacks that must be overcome. Implant wear, fatigue, and failure have been reported in cases of large-joint arthroplasty, and research is underway to limit these problems in cervical arthroplasty. In this article the authors trace the evolution of cervical fusion and the new technique of cervical arthroplasty. The nomenclature of cervical arthroplasty will also be introduced.

Arthroplasty, Replacement↗
PubMed2003

Postlaminectomy cervical deformity.

Postlaminectomy cervical kyphosis is an important consideration when performing surgery. Identifying factors predisposing to postoperative deformity is essential. The goal is to prevent postlaminectomy cervical kyphosis while exposing the patient to minimal additional morbidity. When postlaminectomy kyphosis does occur, surgical correction is often required and performed via an anterior, posterior, or combined approach. The authors discuss the indications for surgical approaches as well as clinical results.

Adult↗
PubMed2003

Benign sacral tumors.

Primary tumors of the sacrum are rare. In adults, the most common sacral tumors are metastases. The most common primary sacral tumor is a chordoma. Chordomas along as well as tumors such as chondrosarcomas, osteosarcomas, myxopapillary ependymomas, myelomas, and Ewing sarcomas are considered malignant. In this article the authors focus on benign sacral tumors.

Adolescent↗
PubMed2003

Cervical osteotomy for the correction of chin-on-chest deformity in ankylosing spondylitis. Technical note.

The correction of chin-on-chest deformity is challenging and requires combined anterior and posterior approaches to the cervical spine. The authors describe a cervical osteotomy technique for the correction of chin-on-chest deformity in patients with ankylosing spondylitis (AS). This procedure can be accomplished using a posterior screw rod construct combined with an anterior hybrid plate system. In patients with AS, a "front-back-front" approach may be necessary because of the deformity's rigidity. The authors describe the complicated intubation and anesthetic requirements for this approach. They performed an anterior discectomy, cervical osteotomy, and unilateral pediculectomy but did not place anterior instrumentation. Via a posterior approach, laminectomies, facetectomies, and the contralateral pediculectomy were then undertaken. A posterior cervical screw/rod system was placed and loosely connected to titanium rods. Intraoperatively the deformity was corrected by placing the neck in extension combined with compression of the posterior screws on the rods. The posterior construct is then tightened. Finally, an anterior cervical approach is performed to place a structural interbody graft and a hybrid anterior cervical plate construct. The authors have successfully used this approach to correct a chin-on-chest deformity in a patient with ankylosing spondylitis. At 1-year follow-up examination, excellent resolution of the deformity and solid fusion had been achieved. They prefer to perform this procedure by using state-of-the-art anterior and posterior instrumentation systems.

Bone Plates↗
PubMed2002

Early results using the Atlantis anterior cervical plate system.

OBJECT: The authors present a retrospective review of 77 patients in whom they performed anterior cervical discectomy and fusion (ACDF) in the treatment of radiculopathy and/or myelopathy. In all cases anterior interbody fusion was performed using the Atlantis locking plate system to treat the degenerative disease. METHODS: There were 41 men and 36 women (mean age 53.8 years), and 24 active cigarette smokers (31%) in the group. All patients presented with signs and symptoms of cervical radiculopathy and/or myelopathy, and magnetic resonance imaging or computerized tomography myelography demonstrated evidence of radicular and/or spinal cord compression at one or more cervical levels. Thirty-one patients underwent single-level ACDF, 20 patients underwent multilevel ACDF without posterior instrumentation, in eight patients one- to four-level corpectomies were supplemented with posterior fixation, 12 patients underwent single-level corpectomy, and six patients underwent multilevel corpectomy with no posterior instrumentation. The mean follow-up period was 15.33 months; overall good-to-excellent outcome was seen in 75% of patients; osseous fusion was demonstrated in 93.5%. In all patients except three, fibular allograft was used as graft material. The degree of overall cervical lordosis was measured at the last follow up and was compared with normal values obtained in age-matched individuals. In addition, the degree of cervical lordosis at fusion levels was compared with overall cervical lordosis. In patients in all five of the aforementioned categories significantly less lordosis was demonstrated than in age-matched controls. In patients who underwent single-level ACDF, single-level corpectomy, and multilevel ACDF significantly less lordosis was observed at the fusion segment than that in the overall cervical spine. Complications included one episode of chronic anterior wound drainage treated with intravenous antibiotic medication and one postoperative posterior wound infection, which required reoperation and intravenous antibiotic medication. Two cases (2.6%) of anterior screw backout and/or breakage were identified. One patient died of unrelated causes within 3 months of operation. CONCLUSIONS: These initial results indicate that use of the Atlantis plate system for anterior cervical arthrodesis produces fusion rates and clinical outcomes that are comparable with those obtained using other locking plating systems. It has the unique advantage, however, of providing the surgeon with the choice of fixed, variable, or hybrid screw constructs as a way of tailoring screw angles to individual anatomical/biomechanical needs.

Adult↗