PubMed Health⌕ Search

Biomedical subjects

Renata Bilewicz

Publications and source records attributed to Renata Bilewicz.

13 recordsLinked to original sources
PubMed2006

Properties of native and hydrophobic laccases immobilized in the liquid-crystalline cubic phase on electrodes.

Both native Trametes hirsuta laccase and the same laccase modified with palmytic chains to turn it more hydrophobic were prepared and studied with cyclic voltammetry and Raman spectroscopy. Native laccase immobilized in the monoolein cubic phase was characterized with resonance Raman spectroscopy, which demonstrated that the structure at the "blue" copper site of the protein remained intact. The diamond-type monoolein cubic phase prevents denaturation of enzymes on the electrode surface and provides contact of the enzyme with the electrode either directly or through the mediation by electroactive probes. Direct electron transfer for both laccases incorporated into a lyotropic liquid crystal was obtained under anaerobic conditions, whereas bioelectrocatalytic activity was shown only for the native enzyme. The differences in electrochemical behavior of native and hydrophobic laccase as well as possible mechanisms of direct and mediated electron transfers are discussed. The Michaelis constant for 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS2-), KMapp, and the maximal current, Imax, for the native enzyme immobilized onto the electrode were estimated to be 0.24 mM, and 5.3 microA, respectively. The maximal current density and the efficiency of the catalysis, Imax/KMapp, were found to be 73 microA cm-2 and 208.2 microA cm-2 mM-1, respectively, and indicated a high efficiency of oxygen electroreduction by the enzyme in the presence of ABTS2- in the cubic-phase environment. Rate constants were calculated to be 7.5x10(4) and 3.6x10(4) M-1 s-1 for native and hydrophobic laccase, respectively.

Benzothiazoles↗
PubMed2006

Voltammetric determination of catalytic reaction parameters of laccase based on electrooxidation of hydroquinone and ABTS.

A convenient method for the measurement of the catalytic activity of laccase is proposed based on the voltammetric determination of catalytic reaction substrates: 2,2'-azinobis-(3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS) and 1,4-benzenediol (hydroquinone). The measurement performed using microelectrodes working under spherical diffusion conditions is both accurate and simple, and allows to monitor parallely the consumption of substrate and formation of product of the catalytic reaction. The method proposed in this paper was compared with the two generally employed procedures based on oxygen measurement by Clark electrode and on spectrophotometry. The procedure described in the present paper was found to be simpler and more reproducible results were obtained than using Clark electrode. Compared to spectrophotometry a larger range of catalytic reaction substrates can be studied including colorless compounds.

Benzothiazoles↗
PubMed2006

pH-tunable equilibria in azocrown ethers with histidine moieties.

The crown ethers with electro- and photoactive azo moieties containing substituents with mobile protons such as in the -COOH groups of histidine, show unique effect of pH switched on/off presence of the azo form. The differences observed for the electrochemical behavior of azocrown ethers with N-acetylhistidine and imidazole moieties reveal the interference of a chemical reduction pathway in strongly acidified solutions. This chemical reduction process leads to the formation of a hydrazine derivative which can be detected by its further electroreduction on the electrode surface. The involvement of chemical reduction is seen clearly in the presence of mobile protons of the -COOH group and mercury as the electrode substrate. The behaviour of the N-acetylhistidine azomacrocyle is similar to that of compounds known to exist in quinone-hydrazone tautomeric equilibria.

Azo Compounds↗
PubMed2006

Fine-tuning of properties of bismacrocyclic dinuclear cyclidene receptors by N-methylation.

N-Methylated bismacrocyclic Cu and Ni complexes were synthesised and structurally characterised in the solid state. Their properties in solution were analysed by using NMR and ESR spectroscopies and electrochemical methods. Face-to-face biscyclidenes linked through polymethylene chains form rectangular boxlike cations. These moieties can host some small guest molecules (water, pi-electron donating compounds) and are stabilised by a shell of neighbouring counterions. For the bismacrocyclic dinuclear complexes containing two nickel or two copper ions, the intramolecular interactions between the metallic centres are strengthened through methylation of the macrocyclic components, as compared with the nonmethylated species. We report the electron coupling created by two unpaired electrons coming from two copper centres observed by ESR spectroscopy. Methylation weakens the electron-acceptor properties of the complexes, which leads to less effective binding of the pi-electron-donating guests. It also increases the stability of the lower oxidation states. In the case of the copper complexes, both Cu(II)/Cu(I) and Cu(II)/Cu(III) reversible one-electron transfers are seen in the voltammograms. These changes in properties are interpreted as the consequences of steric repulsion between the methyl substituents and the macrocyclic ring.

Journal Article↗
PubMed2005

Asymmetry of electron transmission through monolayers of helical polyalanine adsorbed on gold surfaces.

Polyalanine derivatives containing cysteamine linker R-(Ala)14NH-(CH2)2-SH, where R is ferrocenecarbonyl or hydrogen, were synthesized and then used to form self-assembled monolayers on gold. The tilt angles and the packing density of the molecules within monolayer assemblies were determined by FTIR spectroscopy and scanning tunneling microscopy, respectively. Electrochemical properties of monolayer-modified electrodes were studied using cyclic voltammetry and impedance spectroscopy. Measurements of electron-transfer rates using electrochemical techniques and scanning tunneling spectroscopy revealed asymmetry dependent on the applied voltage. It is suggested that the observed electron-transfer behavior is connected with the electric field generated by the molecular dipole of the polyalanine helix.

Adsorption↗
PubMed2005

Modified electrodes based on lipidic cubic phases.

The lipidic cubic phase can be characterized as a curved bilayer forming a three-dimensional, crystallographical, well-ordered structure that is interwoven by aqueous channels. It provides a stable, well-organized environment in which diffusion of both water-soluble and lipid-soluble compounds can take place. Cubic phases based on monoacylglycerols form readily and attract our interest due to their ability to incorporate and stabilize proteins. Their lyotropic and thermotropic phase behaviour has been thoroughly investigated. At hydration over 20%, lipidic cubic phases Ia3d and Pn3m are formed. The latter is stable in the presence of excess water, which is important when the cubic phase is considered as an electrode-modifying material. Due to high viscosity, the cubic phases can be simply smeared over solid substrates such as electrodes and used to host enzymes and synthetic catalysts, leading to new types of catalytically active modified electrodes as shown for the determination of cholesterol, CO(2), or oxygen. The efficiency of transport of small hydrophilic molecules within the film can be determined by voltametry using two types of electrodes: a normal-size electrode working in the linear diffusion regime, and an ultramicroelectrode working under spherical diffusion conditions. This allows determining both the concentration and diffusion coefficient of the electrochemically active probe in the cubic phase. The monoolein-based cubic phase matrices are useful for immobilizing enzymes on the electrode surface (e.g., laccases from Trametes sp. and Rhus vernicifera were employed for monitoring dioxygen). The electronic contact between the electrode and the enzyme was maintained using suitable electroactive probes.

Cholesterol Oxidase↗
PubMed2004

Electrodes modified with monoolein cubic phases hosting laccases for the catalytic reduction of dioxygen.

An enzyme-catalyzed process has been used for dioxygen monitoring. The enzymes were two different laccases (p-diphenol:dioxygen oxidoreductases), chosen as catalysts for dioxygen reduction. The laccases were immobilized in a liquid crystalline cubic phase formed with monoolein. The structures of the cubic phases, both with and without enzymes, were established using small-angle X-ray scattering. The catalytic reduction of dioxygen was performed using a glassy carbon electrode modified with cubic phases containing the enzymes. The modified electrode was used as a dioxygen sensing system, based on the increasing reduction current of a suitable electrochemical probe in the presence of dioxygen.

Biosensing Techniques↗
PubMed2003

Beta-cyclodextrin-based ferrocene-imprinted gold electrodes.

A new stepwise self-assembly procedure is described for the preparation of functional cyclodextrin-modified electrodes. The approach is based on the formation of alkanethiol/lipoylamide-beta-cyclodextrin monolayers with the thiol component responsible for blocking of the electrode surface and lipoylamide-beta-cyclodextrin molecules-for controlled opening of the access of the electroactive probe to the electrode. Functionalization of the electrode is achieved by means of a new cyclodextrin derivative-mono(6-deoxy-6-lipoylamide)-per-2,3,6-O-acetyl-beta-cyclodextrin-prepared in the peracetyl form and deacetylated directly on the electrode surface following the cyclodextrin self-assembly. The progress of deacetylation was monitored by the MALDI MS technique. Deacetylation caused opening of the active sites toward solution probes. The response toward ferrocene was found to be highly improved when ferrocene was added to the solution following self-assembly of cyclodextrin but prior to the thiol self-assembly step (imprinting method). The proposed synthesis and sequential monolayer formation scheme lead to well-organized and stable modified electrode surfaces with improved sensitivity toward solution species compared to other procedures of electrode modification with the cyclodextrin derivatives.

Algorithms↗
PubMed2003

Intermetallic interactions in face-to-face homo- and heterodinuclear bismacrocyclic complexes of copper(II) and nickel(II).

New face-to-face heterodinuclear complexes containing copper(II) and nickel(II) in identical tetraazamacrocyclic environments have been synthesized and characterized using ESI mass-spectrometry, X-ray diffraction, spectroscopic methods, and elemental analysis. These new bismacrocyclic systems were compared with the respective mono- and bismacrocyclic and [2]catenane homonuclear complexes. Interactions between the metal centers were monitored by magnetic and electrochemical measurements. Magnetic data indicate that all copper compounds studied behave as weakly interacting magnets. In the case of copper [2]catenane, the extent of magnetic interactions decreased when a benzocrown moiety was introduced between the macrocyclic units. On the basis of electrochemical data, the interactions between the metal centers were found to be substantially larger for the nickel complexes than for the corresponding copper ones. Interlocking of a benzocrown ether to form [2]catenane led to a nonequivalence of the metal centers and to the increase of donor abilities of the catenane compared to the respective bismacrocyclic complex. This is reflected by the shift of the first formal potential to less positive values. Intermetallic interactions for the heteronuclear nickel/copper complexes were found intermediary compared to the homonuclear ones. They were strengthened by shortening the spacer between the two tetraazamacrocyclic subunits which is a convenient way of fine-tuning the interactions. The increase of intermetallic interactions led to the increased stability of the intermediate mixed-valence states indicated by the higher values of comproportionation constants.

Journal Article↗
PubMed2003

Diffusion of hydrophilic probes in bicontinuous lipidic cubic phase.

The lipidic cubic phase was prepared by mixing monoolein (monooleoyl-rac-glycerol, MO) with water in 64:36% ratio and applied to the solid support-glassy carbon or platinum electrodes. Highly viscous, homogeneous and transparent cubic phase film remained stable and firmly attached to the electrode surface. In order to describe the efficiency of transport of small hydrophilic molecules within the film, we studied the diffusion of selected redox mediators along the network of aqueous channels present in the cubic phase structure. Loading times, diffusion coefficients and concentrations of the mediators in the layer were determined by voltammetry and chronocoulometry using two types of electrodes: a normal size electrode working in the linear diffusion regime and an ultramicroelectrode working under spherical diffusion conditions. In addition to the well-defined order, transparency and viscosity, the fast transport of small redox mediators through the aqueous channels of the cubic phase and along the interfacial water-lipid region is another important property of this matrix. The diffusion of the hydrophilic probes in the cubic phase was found to be more efficient than in the Nafion layers. Efficient transport of small redox mediators within the cubic phase means that not only enzymes and synthetic catalysts can be incorporated into the phase but also their fast communication with electrode surface will be enabled thanks to the simultaneous incorporation of small mobile redox mediators. This property of the cubic liquid crystalline phases based on lipids makes them especially interesting from the point of view of practical applications in biosensing and bioelectrocatalysis.

Diffusion↗
PubMed2002

A concept for immobilizing catalytic complexes on electrodes: cubic phase layers for carbon dioxide sensing.

Liquid crystalline cubic phases formed with monoolein and Myverol have been used as matrixes to host a catalytic complex of nickel(II) and 1-hexadecyl-1,4,8,11-tetraazacyclotetradecane for the reduction of carbon dioxide. The structures of the cubic phases, both with and without the catalyst, were established using small-angle X-ray scattering. The catalytic reduction of carbon dioxide was performed using thin mercury film and glassy carbon electrodes modified with cubic phases containing the catalyst. The linear dependence of the catalytic reduction current on the carbon dioxide concentration allowed use of the modified electrodes as sensing devices both in solution and in the gas phase. The high reproducibility of the measurements makes this method of monitoring carbon dioxide levels attractive compared to other methods based on modified electrodes.

Carbon Dioxide↗