PubMed Health⌕ Search

Biomedical subjects

Reto Manser

Publications and source records attributed to Reto Manser.

4 recordsLinked to original sources

Exploring temporal variations of oxygen saturation constants of nitrifying bacteria.

Activated sludge models (ASM) are generally accepted as state-of-the-art in modeling wastewater treatment plants. In this paper, we assess the temporal variability of an ASM parameter-the oxygen half-saturation constant of autotrophic bacteria (K(O),(AUT)). A series of respirometric experiments is performed for conventional activated sludge and sludge from a membrane bioreactor. K(O) values are estimated for both ammonium-oxidizing and nitrite-oxidizing bacteria. For parameter estimation, the Monod kinetic model structure is extended by a sensor model. Still remaining systematic deviations between data and model are considered by a thorough residual analysis: (1) uncertainty estimates of K(O) are corrected to reflect model structure deficiencies and (2) the inter-experimental cross-correlation of residuals is taken into account to assess temporal changes. We conclude that K(O),(AUT) is a time variable parameter and should be considered accordingly.

Ammonia↗

Decay processes of nitrifying bacteria in biological wastewater treatment systems.

A knowledge of the decay rates of autotrophic bacteria is important for reliably modeling nitrification in activated sludge plants. The introduction of nitrite to activated sludge models also requires the separate determination of the kinetics of ammonia- and nitrite-oxidizing bacteria. Batch experiments were carried out in order to study the effects of different oxidiation-reduction potential conditions and membrane separation on the separate decay of these bacteria. It was found that decay is negligible in both cases under anoxic conditions. No significant differences were detected between the membrane and conventional activated sludge. The aerobic decay of these two types of bacteria did not diverge significantly either. However, the measured loss of autotrophic activity was only partly explained by the endogenous respiration concept as incorporated in activated sludge model no. 3 (ASM3). In contrast to nitrite-oxidizing bacteria, ammonia-oxidizing bacteria needed 1-2 h after substrate addition to reach their maximum growth rate measured as a maximum OUR. This pattern could be successfully modeled using the ASM3 extended by enzyme kinetics. The significance of these findings on wastewater treatment is discussed on the basis of the extended ASM3.

Ammonia↗

A rapid method to quantify nitrifiers in activated sludge.

Quantification of bacteria using Fluorescence In Situ Hybridization (FISH), confocal laser scanning microscopy (CLSM) and image analysis is very time consuming and requires the availability of an expensive microscope. Therefore, a rapid method to quantify nitrifying bacteria in activated sludge using FISH and epifluorescence microscopy was developed. The quantification of the biovolume is based on manual counting of the aggregates formed by nitrifying bacteria and determination of their size. The overall uncertainty of the method was evaluated as a function of the number of analyzed microscopic fields. It was found that 10-15 microscopic fields for ammonia-oxidizing bacteria and 6-8 microscopic fields for nitrite-oxidizing bacteria per sample were optimal regarding effort and accuracy. Accordingly, the time needed for one sample was only 5-15 min, compared to about 1h for the quantification with CLSM and image analysis. As a consequence, this method also allows for the measurement of extended time series with a reasonable effort. The comparison of the determined biovolume and the measured activity showed an explicit correlation.

Automation↗

Consequences of mass transfer effects on the inetics of nitrifiers.

The influence of membrane separation and mass transfer effects on the kinetics of nitrifiers was evaluated by running a membrane bioreactor (MBR) and a conventional activated sludge (CAS) plant in parallel. Both pilot plants were operated at the same sludge age and treated the same domestic wastewater. The half-saturation constants for the substrate were low in both MBR and CAS and did not differ significantly between the two processes (K(NH(4))) and 0.14+/-0.10 g(N)m(-3) and (K(NO(2))) and 0.28+/-0.20 g(N)m(-3) for the MBR and CAS, respectively). However, the half-saturation constants for oxygen exhibited a major difference between the two processes for both the ammonia-oxidizing (AOB) and nitrite-oxidizing (NOB) bacteria. The experiments yielded K(O,AOB)=0.18+/-0.04 and 0.79+/-0.08 g(O2) as well as K(O,NOB)=0.13+/-0.06 and 0.47+/-0.04 g(O2) m(-3) (substrate only NO(2)) for the MBR and CAS, respectively. The higher K(0) values of the CAS were attributed to mass transfer effects within the large flocs prevailing in the conventional system. In contrast, the sludge from the MBR consisted of very small flocs for which the diffusion resistance can be neglected. On the basis of these results, the implementation of mass transfer effects in activated sludge models is discussed and consequences for the operation of MBRs are highlighted.

Ammonia↗